Odd Multi-Channel Leakage with Stylus RMX...help please

Ok, so I've been to the Stylus site, I got the nice little pdf explanation of how to set up a Stylus as a multi-instrument, works like a charm, but then I went to set up my multi-channel set up so that I can add some Logic plugs to individual Stylus elements and heres what happens:
I have 4 elements going in one Stylus instrument, each has it's own track on the arrange now, but I want to get it to aux's so I've sent Djembe's which is the first element out B of the Stylus mixer which translates to Stylus RMX 3/4, no problems so far. Until I play back. When I play the Djembes back I notice this. That almost all of the Djembe slices are playing through Aux 1 (which is receiving B from Stylus as Stylus RMX 3/4), but not all of the slices, some in fact are still playing through the Audio Instrument track. This is not good, as it means I don't get the desired affect of being able to effect each element individually. Has this happened to anyone else, am I missing something blatantly obvious? Pointing me in the right direction would be greatly appreciated, as always, thanks in advance,
Graham
ps - the Djembe element was just an example this problem is occuring in all situations where I've tried to set up a multi-channel Stylus arrangment

Hi Jim,
you were 100% correct, I'd been fiddling with the edit groups while I was watching the video on edit groups to get a feel for it, and see how it works, it's an amazing tool.
However, here is another follow up question, it seems that although now I've gone through my settings and made sure that each element is sending to A, B, C or D respectively, the Aux's ie delay or flange, on appears on the original instrument track (out A). I've gone over and over this in the edit groups and they are all selected to send to B, C, or D only, but the effects seem to default to A and I can't figure out for the life of me where I can change that. Any ideas on this one. It works like a charm right now until I add stylus effects to the elements then it gets a bit messed up again. Any help would be greatly appreciated. Thanks, you get points for your last reply! Cheers,
Graham

Similar Messages

  • My imessage isn't working when i send messages to people with iphones that have imessage it works with very few people, now it's starting to stop working with those people. help please.

    my imessage doesn't work between my friends and i. i have a new iphone 5. my messages only work with some people. with others imessage doesn't work in the first place and now its starting to stop working with other people help please.
    & yes we all have imessage on.

    Hi there,
    I see that you are having IMessage problems. Some of the problems might be:
    - Your friends IMessage is not activated (you have to activiate it with your apple id)
    - Your IMessage is not activated
    Here is some links to another person`s Imessage problems:
    https://discussions.apple.com/message/17301880#17301880
    https://discussions.apple.com/message/20142285#20142285
    https://discussions.apple.com/message/18988318#18988318
    Hope that helps!

  • After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

    after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

    Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD  and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
    Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
    You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
    https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

  • Help with Stylus RMX please

    Hi!
    Please tell me somebody
    How use RMX in Logic?
    I open it on Instrument tr1 - for use chanel 1
    Then ,assign Instr 2 to 1 and change MIDI chanel to 2
    But when i play (hat for exmpl),sounds like double with chorus
    What i do wrong?
    And i cant see RMX outputs in mixer (of course i open it as multitrack)
    Please HELP!

    This is explained, step by step, in the "Using Stylus RMX in Logic" tutorial video on your Stylus DVD, and it's easier watching someone do it on screen than type it out here step by step.
    In short, create a multi-instrument, cable it to your audio instrument that contains RMX, and access channels 1 to 8 using the multi subinstruments.
    Now go watch the tutorial

  • No multi-channel available with HDMI output in Audio MIDI Setup on Macbook Air mid-2011 !!!!!!!

    Hi everybody !
    I am currently facing some problem with seting up a surround sound system.
    I looked everywhere on the web but i couldn't find any proper answer to this problem.
    To sum up, i want to have a Dolby Digital or DTS surround sound when i'm playing a movie (with an AC3 audio track obviously).
    I have a Macbook Air 13" Core i7 connected to a SAMSUNG Plasma TV via an iWires thunderbolt -> HDMI cable (bought on the same time as the MBA). This TV is connected to an amp via an optical cable and this amp to a 5.1 system.
    When i am going to Audio MIDI Setup to configure the HDMI output, i cannot select any multi-channel option, only stereo !!!!
    Is someone has any idea how to solve this problem ? I am struggling a lot and spent hours on that without finding any solutions !
    Thanks a lot for your time !

    Hello ckkzzzle,
    I was looking into the issue you are describing and think I have a great article to help troubleshoot it. The article is called Apple computers: Troubleshooting issues with video on internal or external displays found here: http://support.apple.com/kb/ht1573.
    Start here, and work your way down as needed:
    Check connections
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    If more than one video adapter is in use—or "daisy-chained"—troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    All the very best,
    Sterling

  • Problem with stylus rmx and LE

    hi folks!)
    have since short time following problem:
    when i take stylus rmx and collect a groove group, every thing is fine as long as i save in logic express, after saving rmx lost his connections to some grooves i have selected.
    could someone give me a hand?
    i also saved it as a new user "multi" in stylus, but also when i call this setting back i can't get the loops(sounds)
    konfig: powerbook g4 1,67mac - osX10.4.6 - logic express 7.2
    thxalot4yourhelp

    Hey,
    I believe there's an Universal update on that version you have, that can not be only for Intel, take a peak at Logic Pro Forum the guys have been posting on RMX yesterday.
    Cheers,
    Jorge

  • Macbook stuck on white screen with apple logo. help please

    I have a macbook (black model) and while I was surfing on internet it is frozen. so I shut it down and restarted. When I restarted, it stuck on white screen with gray apple logo and seems like booting but nothing happens.
    after that, I restarted again and put installation disc (leopard) without pressing any key and it opened normally. I backed up os with time machine but in one hour it is frozen again.
    restarted again but this time it did not boot normally. so i tried booting from cd with c key, it opened installation screen. I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported.
    After all, I tried to erase and install system several times, but after language section when I click agree to terms and conditions, mac freeze again.
    So, I do not know what to do. Any help please?
    Note: I already tried PRM and Safe Mode. (after safe mode it took me to installation screen again and nothing changed.)
    Any help would be much appreciated!
    Uptade: Also, opened system profiler and clicked on Serial-ATA, it seems loading but do not show any info. stucked again! help please
    Message was edited by: burakbey

    HI,
    *"I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported."*
    You need to select "MacintoshHD 10.5.8 not "disc image" in order to run Disk Utility and Verify and if necessary, Repair the disk.
    That's why you are seeing this dialog.
    *are unavailable to click and S.M.A.R.T status is not supported.*
    Also, run the Apple Hardware Test.
    http://abclocal.go.com/kgo/video?id=7011117
    Carolyn

  • My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

    My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

    Start here
    http://support.apple.com/kb/HT1430

  • After recent upgrades Firefox prevents links in several websites from working whilst there is no such problem with other browsers - help please.

    Since a recent upgrade of Firefox links in several websites no longer work. They used to be fine and I loved Firefox. The problems do not exist with other browsers e.g. Internet Explorer, Google Chrome. More specifically, on talktalk.co.uk the links to news items do not work, nor do those to "My Account." On Barclays.co.uk the link to print my statement doesn't work - similarly on MBNA.com
    There are several suggested solutions around the internet but all are complex, none so far have worked and I don't see why I should need to carry out the suggested tweaks. Firefox used to be great - now it isn't. The problem seems to be with the upgrade. Please help me to get my Firefox to where it should be.

    Thank you but please don't waste any more time on this. I have done as I said I would - removed and re- installed Firefox, cleared all cookies and caches (CCleaner) - still doesn't work. As I said at the start, the problem is not confined to Talktalk - it applies to several other sites and links. The problem does not occur with Internet Explorer nor with Google Chrome so I am now using those.

  • Problem with my Macbook - HELP PLEASE!!!!!!!!

    Hello, and please help!
    This is my second 1.83ghz 1 gb ram 80 gb hard drive Macbook. The first one mooed and had a buzzy display. This one has been perfect for three weeks. Have loved it. But today, my girlfriend shut it down, apparently properly, we took it out of it's case to use it and the fan was on FULL blast. Even though the computer was off! It then wouldn't turn on for ages. The macbook was very, very hot at this point.
    Eventually it restarted when the fan went off ten minutes later. The battery level had gone from 80% to 28%. And then it said 'Mac OS X unexpetedly quit' and carried on as normal.... for the moment.
    My girlfriend said 'it's done it once before' too.
    Any heads up on this? Many thanks in advance.
    Paddy

    It definitly sounds like she instructed the computer to shut down, but did not wait for the Mac OS to actually shut off the computer befre closing the lid. Doing so suspends activity and puts the computer into sleep mode where it still uses power. If you put the computer in a bag, the heat will build up, and I would expect it do do as you described.
    Ask your girlfriend if she waited for the screen to turn black or not. If she did wait for the screen to turn black, then you definitly have a problem that should be taken up with AppleCare, or Apple.
    If this post was helpful, please mark it as such.

  • I can't find most of my files for the songs in my iTunes library and so cannot Sync them with my iPhone, Help please

    Help please! When I try to sync my iPhone it tells me it can't find most of my files for the songs in my iTunes library, although the songs are there!!

    Can anyone help?

  • I am struggling to know how to download music on to mp3. am useless with computers. simple help please !

    am really struggling to transfer music to mp3. not a clue how its done. Help please!

    You do not download music from iTunes as an MP3, all music is downloaded as an AAC file.
    iTunes 11 for Windows: Save a copy of a song in a new format

  • My IPhone 4s is stuck in an update can't do anything with it. Help please.

    July 2, 2014 I started an update and now it's stuck trying to update. Any help please?

        Hi Russ1971 - I apologize for the delay as I understand how time sensitive this is when your phone is not working! Were you completing the update over the air or connected via iTunes? I am eager to get you up and running! May I have your mobile number and account verification (billing password  1-5 characters or if not applicable last 4 of SSN)?
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Can Someone Help With Stylus RMX???

    A hard drive died on me a few weeks back. I ordered replacement discs from Spectrasonics for RMX, as the sounds were on the external drive that died.
    I got the discs today and installed tonight. I also downloaded the latest versions of everything from Spectrasonics.
    Logic 9.1 sees the plug in fine, but ....the plug does not see any libraries. Nor does it ask me "Where is your SAGE folder?"
    I have installed the SAGE folder on a second internal drive. So the path is "Sampledrive/SAGE"
    On my internal drive is "Library/Application Support/Spectrasonics/SAGE (alias from the SampleDrive).
    Any ideas on what is up here? I am writing Spectrasonics as well but they are so backed up I might not here from them for days.
    Thanks
    Tom

    Do you have your data folder in the exact path it was before (ie, does the new drive have the same name as the old, and you are installing to the exact same path?)
    Have you done this:
    "On the Mac, move the SAGE folder from your Spectrasonics folder located at <user>/Library/Application Support/Spectrasonics to the desired location. Make an alias to the SAGE folder and put that alias in the Spectrasonics folder. Rename the alias to SAGE. "
    "MAC OSX - MOVING THE SAGE DIRECTORY AFTER INSTALLATION
    • Drag or copy the SAGE folder from your installation drive
    (For Example: Macintosh HD/Users/user name/Library/Application Support/Spectrasonics)
    to the hard drive location of your choice.
    This can be another drive partition, a secondary internal drive or an external hard drive such as a Firewire or USB2 hard drive, etc.
    • Next, hold (Apple key and Option key) on the keyboard, click and drag the SAGE folder to the desktop to create an alias of the folder named SAGE.
    • Next, move the SAGE alias from the desktop to Users/user name/Library/Application Support/Spectrasonics"

  • A templete for logic 9 with stylus rmx and omnisphere

    Hello, Is there anyone who can create a templete in logic 9 which would allow me to use stylue rmx and omnisphere in multi mode?
    I am having a bit of a problem...
    Thanks

    Yes there is a possibility that I am confused.. I did get omnisphere working fine...now I am trying to add rmx so I can create a templete to start my projects from.
    I watched the tutorial, I followed it step by step. maybe it is the layout of logic 9..let me ask you, im rmx, do i chose stereo or multi timbral? Also in the tutorial tells you to in the arrange page to click and hold instrument two after you create the 8 tracks, then chose audio>audio instrument>rmx unless i am missing something, you cannot click nad hold in logic 9? Any how, you can make a tutorial?
    for credibility check out my latest project.. www.viennaskye.com/2.mov

Maybe you are looking for