Odd number of pages

While creating a wire bound book, I've ended up with an odd number pages and no back cover (the last page is not labled back cover) nor is their a blank inside back cover. Have no idea how this happened. Changing themes or book styles doesn't change it. Do I need to recreate the book from scratch? Or is there some other way to repair this book?

That's the way it works with facing pages....

Similar Messages

  • How do you print two-sided in In Design when some sections have an odd number of pages?

    I'm new to In Design, and I'm trying to do something that seems pretty basic and having trouble figuring out how to do it, and I haven't found anything in the Adobe Forum or online that addresses this situation.
    I am working on a document that is broken into sections, with page numbering starting on Page 1 for each section.  I have mirror image layouts for the odd and even master pages - for example, the page number is on the left side on even pages and on the right side for odd pages, as you might generally expect to see on a two-sided printout, where in a book or a binder, the even pages are on the left and the odd pages are on the right.
    I'm printing the document from my computer onto a printer that supports two-sided printing.  I don't see any options in the File / Print window for two sided printing, so I set this option on the printer itself using the [Setup...] button at the bottom of the window.  This works - I am getting the printout on both sides of the sheets of paper.
    At the moment, the first section is 3 pages (two spreads, one with the first page, and one with the other two).  The next section starts with page number 1 on the third spread (one page) and then continues two pages per spread - all as expected.
    Here's the problem - the first page of the second section is printing on the back of the last sheet of first section, rather than starting on a new front-facing sheet - so when I put this in a binder, the odd pages are on the left and the even pages on the right.  Every time I hit the end of another section with an odd number of pages, it flips around again.
    There's a manual workaround I found - scan through the document and add a blank page to the end of every section that has an odd number of pages (and check "Print Blank Pages).  But I'd have to do this every time I print as I'm adding new pages, and add/delete blank pages as the number in each section changes.
    I can't believe that In Design doesn't provide a way to get this to work properly, as I'm sure many people have had this same situation, and I'm hoping that it's some simple thing that I just haven't been able to figure out...
    HELP!!! (thanks!  B^)

    Well, MS Word does something like this automatically - if you tell it to start a new section on an odd page, and if the section before it ends on an odd page, it will "skip" the even page number in between - and when it prints, it automatically spits out a blank page in between them, so that on a two-sided printer, the odd pages all print on the front of the paper (which is the right-facing sheet when they are put in a binder or book).
    InDesign shows the pages like this on the spreads (odd page numbers always on the right), so it is aware of the desired orientation, and I'd think it would provide a mechanism to ensure that they print out this way as well...

  • Printing double sided odd number of pages

    I have Adobe Reader 10.0.2 instalied on my iMac running Mac OS 10.6.7 with a Canon Pixma iP4200 printer. Since installing this version of Reader I have come across a curious problem with printing PDF files double sided with an odd number of pages.
    For example, a three page PDF file printed double sided. The first page prints first, then pages 2 and 3 print double sided. This leaves a blank page on the reverse side of page 1 which is INCORRECT and has me puzzled. Normal double sided printing should have pages 1 and 2 back to back and page 3 with a blank page on the reverse.
    All my other software on my iMac prints an odd numbered file double sided correctly. It is only Reader 10.0.2 that has this problem and would appreciate a solution.
    Have I found a bug in the Reader software?.
    Regards
    Peter AKA DaftBrush

    Hello
    I specially created a PDF of three pages with no page breaks or section breaks. The problem still persists no matter what way I set the printing order of the pages, that is automatic, normal or reverse when double sided printing. The same file in MS Word format prints perfectly.
    My only solution at the moment is to add a blank page at the end of a PDF document that has an odd number of pages.
    I would like to know if I have discovered a bug in Adobe Reader and is there a fix that I can download to solve the problem.
    Regards
    Peter

  • Double sided printing problem -odd number of pages only

    If I print something with 8 or 12 pages or whatever (even numbers) everything works great. For 9 or 15 or whatever odd numbers it becomes sort of like a random number generator. Page 1 is ok but the backside where 2 should go may be blank as could be page 4. The last page prints on the very last page that should be blank. If I have a 9 page document I can select pages 1-8 and then separately print just page 9 and it works good.

    Hey , I see that you are having some issues with printing from your Windows Vista PC to your Deskjet 1510. Now a printer only prints what the computer tells it to print, but I can help you find the issue on your PC.
     Here's what we'll do:Turn the printer offClose all programs on your PC.Open your Control Panel and then Printers and Faxes.Right click on the picture of the printer.Click on Remove Device.Repeat if you have any more copies of your Deskjet 1510 listed.Turn the printer on.If the printer did not appear in this window after turning on the printer and waiting a few minutes then click on Add Printer at the top.Follow the prompts to add the printer back.Try printing again.This should sort out your issue with printing pages in the wrong order. If it does not then try the following:Uninstall and reinstall the printer.Uninstall and reinstall the sotware you are printing from.Try a different program.If it does then please let other users know by clicking on Accept as Solution below my post. Likewise if you have any more questions please let me know.
    I hope this helps and I hope you have a great weekend!

  • How do you in an easy way number the pages in a book your´e doing in LR4?

    How do you in an easy way number the pages in a book your´e doing in LR4?
    In Blurb´s BookSmart it´s quite easy to do it autoamtically.

    You might like to add your vote to this request - http://feedback.photoshop.com/photoshop_family/topics/lightroom_book_module_and_page_numbe ring_building_indexes_and_table_of_contents - oddly that was the only request I could fine, apart from one with a whole lot of requests.

  • Getting Number of Pages

    Hi,
    Is there anyway I can get total number of pages using Javascript?  this.numPages is not working.
    I am developing dynamic form, where I need to print some pages only in odd page. Pageset properties are not working for dynamic form. So I thought of controlling the pages using Java script. Kindly throw some lights on it.
    Regards
    Selva

    Thanks, I got the answer. xfa.host.numPages provides me the n
    umber of pageas.

  • Problem printing odd or even pages

    When i print odd pages only, the last page will not be printed. If i print even pages, an extra blank page is printed.
    The print dialog preview shows the correct pages to be printed, but the actual prinout differs.
    This happens on documents with off number of pages.
    Because of this problem, manual duplex printing becomes very difficult. My printer does not have duplex printing option.
    I'm using AR v8.1.2

    I have a similar problem. With my HP-1200, I need to print even pages in reverse order first. I have a 13-page document. When I print "even-pages only," it prints the following pages in this order: 12, 10, 8, 6, 4, 2, 2. It prints page 2 twice! When I put the pages back into the printer and select "odd pages only" (not reversed), it prints pages 1, 3, 5, 7, 9 and 11, but it does not print page 13.
    I installed this Adobe Reader, version 8.1.2 a few days ago. I never had this problem with previous versions of Adobe Reader. I am running Vista Home Premium on my Dell Dimension E520.

  • Reviewing my bill i saw a LOT of text messages from a odd number sent to my number, BUT i never received them. Why would this be??

    Reviewing my bill i saw a LOT of text messages from a odd number sent to my number, BUT i never received them. Why would this be??

    Why did you give your granddaughter the password?
    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • Page numbers  and number of pages

    I am new to Indesign CS3. I have numerous articles to put on my web sites, using pdf. (I use Acrobat Professional 8). I am using ICS3 to layout each document, adding the text, then exporting to AP8 for 'tidying up'.
    As well as each page number, I want to put the total number of pages on a Master Page. I can do the page number itself but I also want ICS3 to enter the the total number of pages automatically. For example in a 6 page document:
    Page 1 of 6
    Page 2 of 6
    and so on
    How would I go about getting ICS3 to put the total number of pages, for example, 'of 6' on, please?
    Thank you

    I think the best thing for me to do is to first try the several presets that appear to be what I'm after and if so then not trouble you further. I shall do this week and let you know.
    Michael
    http://www.michaellever.co.uk/

  • Number of Page View is showing zero for Site web Analytics Reports

    Hi,
    We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
    count shows 0 for all the dates.
    There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
    Any help would be appreciated.
    Regards,
    Vijay

    hi
    1-first check "Usage and Health Data Collection Proxy" is started, if not started:
    find usage proxy id with following command:
    Get-SPServiceApplicationProxy
    then start service with following command:
    $UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
    $UsageApp.Provision()
    2-check following link:
    Popularity Trends populating 0 results
    yaşamak bir eylemdir

  • Page Number - Total Page number in Blocked ALV

    Hi Gurus,
      I need to print the page numbers like 1 of 5 in the ALV footer. Am able to print the current page number but am unable to print the total page number in the footer of the Blocked ALV. Can any one guide me how to display the total number of pages.
    Points will be awarded
    Thanks
    Ravi

    Hi,
    Please refer to the link below :
    http://www.sapdev.co.uk/reporting/alv/alvgrid_events.htm
    Thanks,
    Sri.

  • To find total number of pages in XML publisher

    1. Is there any method to find the total number of pages in BI or XML publisher.
    2. Is there any method to to repeat the column(Not rows) on every page.For eg you have table with two columns say "A" and "B" .I want to repeat this B in every page . And A should print only in first page.
    3. Is there any method to print a text say "ABC" only on first page footer based on condition.
    Thanks
    Wazid

    Exactly what my requirement is- In my template i have set header and footer page setup as "different first page'" and also printing the user text at the bottom of the last page using <?start@last-page-first:body?> <?end body?>.When i run the template, for multiple pages output user text is displaying at the bottom of the last page that is working fine but for single page output user text is not displaying at the bottom of the page because of the ""different first page'" header and footer.If you have any idea please suggest.

  • Why is my page count always 1 (regardless of number of pages)?

    I just created a new Numbers document. It has 3 pages.
    In the footer I display (page number) of (page count).
    I would expect to see "1 of 3", "2 of 3", "3 of 3".
    What I get is "1 of 1", "2 of 1", "3 of 1".
    What do I have to do to get the page count to count the number of pages?
    Thanks

    Hello. I was searching the boards today, because I was having this same issue.  I couldn't figure out why when I chose Insert, Page Count in the footer, it was always coming up "1" - Yet, Insert, Page Number would be correct.  This is what I would get in footer:
    Page 1 of 1, Page 2 of 1, Page 3 of 1, Page 4 of 1, etc.  Should have been: Page 1 of 5, etc.
    Not finding a "fix" here besides starting troubleshooting with creating a test User Account (which is okay), I decided to do some more troubleshooting first, and I discovered something.
    I found my fix.  I don't know if it's what was happening for you, but this fixed it for me.
    Insert the Page Count from the Menu in the footer.  Make sure the Inspector is open.  Go to the Sheet Section.  In the middle is a Page Options section.  For me, the "continue from previous sheet" was checked.  Instead, I checked the second option "Start at" and chose "1."  That worked for me.
    I started this spreadsheet from a csv document, but I tried starting one from a blank template and "continue..." was also selected.  Seems like it's the default?
    Hope this helps someone else who is having this issue.
    Have a great day!

  • Print number of pages with Report Generation toolkit

    I use the report generation toolkit and the Print Report.vi to print a table and some text extracted from a MS Access database. The result of this is a print out that takes up several pages.
    Now, on each page i want something like (Page x of y), and I do not want to buy more expensive NI packages for this simple thing. I know it should be possible since the Report Express vi can do it --- which for me is a useless vi.
    I do not consider it a nice solution to try and keep track of the number of pages myself by dividing the table into more tables and use the new page vi between each "page table". This I would not like to do since depending on paper size, font size, and length of text strings in each cell this will be virtually impossible.
    By moving into the Print Report.vi I've tried to see if I somehow can extract the info --- I've not found anything usefull but expect a workaround to possible.
    Any suggestions?
    Cheers,
    Martin

    Hi Skinny,
    There are some tokens you can use in the headers and footers of Standard Reports generated by the Report Generation VIs.  If you take a look at [LabVIEW]\examples\reports\TextReportExample.llb\Text Report Example.vi, you'll see that the right footer text of the report has the token <pagenofm>, which generates a footer of the form "1 of 10", to indicate page 1 out of 10 pages.  There's also another tag you can use, <page>, that just lists the page number itself without a total number of pages.  If you look at the help for the Set Report Header Text.vi or Set Report Footer Text.vi, you'll see a link in the help for all the different "tokens" you can use with the report header and footer.  Actually, now that I think about it, you can use these tokens anywhere in the report, including the body text.
    Good luck,
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • How can I change the number of pages in a spread?

    I imported a document that our PR department used to create in Quark into InDesign 5.5. They have it set up in four-page spreads. However, the document has always been printed with a coil binding with a large graphic on each left-hand page and text on the right page. I would like to convert to using two-page spreads. However, none of the places the InDesign help leads me give any indication of changing the number of pages per spread.
    My problem may be related to having imported from Quark, but if there's an easy way to change this, I'd appreciate hearing about it. Thanks!
    -Brian

    In the pages panel select the spreads then right-click and check Allow Selected Spreads to Shuffle and also Allow Documrnt pages to shuffle. If asked if you want to maintain the current page arrangement say no.

Maybe you are looking for