Odd problem after Kernel update - Bluetooth keeps turning on

I recently upgraded from the 2.6.30 kernel to version 2.6.31. With this upgrade I have noticed something odd - there's a light indicating that the Bluetooth controller is on. This light now turns on when I boot Arch. I have never installed any Bluetooth drivers or software, and I'd prefer if bluetooth disabled as I do not use it with Arch. Does anyone have any ideas?
Btw, my machine is a Thinkpad T61 with a "Broadcom Corp. Bluetooth Controller", according to lsusb.
Last edited by ch_123 (2009-10-14 10:20:35)

I've a Thinkpad T60 with the same controller and problem. I've taken to working around this by disabling bluetooth in rc.local, though I'd be very grateful for a solution.

Similar Messages

Problem after kernel updation Sun OS 8 and SAP 4.7

Hi...
I have updated kernel from 620 to 640 (patch 223).
Now after upgrading i am getting error as below while starting SAP.
ld.so.1: R3trans: fatal: libCstd.so.1: open failed: No such file or directory
Killed
I found that libCstd.so.1 is missing as--
bash-2.03# ldd R3trans
     libdl.so.1 =>      /usr/lib/64/libdl.so.1
     libnsl.so.1 =>      /usr/lib/64/libnsl.so.1
     libsocket.so.1 =>      /usr/lib/64/libsocket.so.1
     libCstd.so.1 =>      (file not found)
     libCrun.so.1 =>      /usr/lib/64/libCrun.so.1
     libm.so.1 =>      /usr/lib/64/libm.so.1
     libthread.so.1 =>      /usr/lib/64/libthread.so.1
     libw.so.1 =>      /usr/lib/64/libw.so.1
     libc.so.1 =>      /usr/lib/64/libc.so.1
     libmp.so.2 =>      /usr/lib/64/libmp.so.2
     /usr/platform/SUNW,Sun-Fire-280R/lib/sparcv9/libc_psr.so.1
Now problem is that how to get this librery and in which package. OS is Sun OS5.8 and SAP 4.7.
Regards,
Abhimanyu

Update SUNWlibC patches & SUNWlibCx patches and get the desired librery.
Regards,
Abhimanyu

[SOLVED]iwlagn problem after kernel update

yesterday i updated kernel to 2.6.32.10. after reboot kernel.log started with messages like:
Mar 17 09:59:43 laptop kernel: iwlagn 0000:04:00.0: free more than tfds_in_queue (0:1)
log creates that message when i do something online. looks like every time i reload page/ping/do anything online that message goes to kernel.log.
the thing that
worries me is this:
% cat /var/log/kernel.log | grep tfds_in_que | wc -l
20106
my computer is up for less than an hour.
wlan card is intel 5100
does anyone have any suggestion? go back to kernel 2..6.32.9?
EDIT: everything else works fine. wlan is working without a problem.
Last edited by devil_kc (2010-04-10 17:37:20)

i confirm that have the same problem
Network controller: Intel Corporation Wireless WiFi Link 5100
[root@hermes ~]# cat /var/log/kernel.log|grep tfds_in_queue|wc -l
40871
[root@hermes ~]# uptime
20:52:08 up 1:18, 2 users, load average: 0.00, 0.02, 0.05
this is really nasty
from changelog on kernel.org i find this:
commit 44af042e42f2231579ea8ef7586d3789d198f609
Author: Stanislaw Gruszka <[email protected]>
Date: Fri Feb 19 15:47:33 2010 -0800
iwlwifi: sanity check before counting number of tfds can be free
commit a120e912eb51e347f36c71b60a1d13af74d30e83 upstream.
Check the frame control for ieee80211_is_data_qos() is true before
counting the number of tfds can be free, the tfds_in_queue only
increment when ieee80211_is_data_qos() is true before transmit; so it
should only decrement if the type match.
Remove ieee80211_is_data_qos check for frame_ctrl in tx_resp to avoid
invalid information pass from uCode.
Signed-off-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Last edited by icarus-c (2010-03-17 09:56:00)

Nvidia problem after kernel update

I moved from 2.6.15 to 2.6.16 with ABS and now my nvidia isn't working.
When I run pacman -S nvidia, I see:
INSTALLATION FAILED
=> You have to shutdown X-server to finish installation! You have to rerun pacman -s nvidia
And I am sure that I've shutdown my X, I even removed /tmp/.X0-lock
Can anyone help me

:? I don't understand, I have my kernel sources at /usr/src/linux-2.6.16-ARCH and I have /lib/modules/linux-2.6.16-ARCH but the ABS is /var/abs/testing/kernels/kernel26/pkg/lib/modules/2.6.16-ARCH
The logfile talks about /opt/nvidia but I dont have that
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Fri Mar 31 10:42:51 2006
option status:
license pre-accepted : true
update : false
force update : false
expert : false
uninstall : false
driver info : false
no precompiled interface: true
no ncurses color : false
query latest driver ver : false
OpenGL header files : false
no questions : true
silent : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : true
no network : true
no ABI note : false
no RPMs : false
force tls : (not specified)
force compat32 tls : (not specified)
X install prefix : /usr
OpenGL install prefix : /usr
compat32 install prefix : (not specified)
installer install prefix: /usr
utility install prefix : /usr
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : none
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)
Using built-in stream user interface
-> License accepted by command line option.
-> Not probing for precompiled kernel interfaces.
-> Performing CC test with CC="cc".
-> Kernel source path: '/lib/modules/2.6.16-ARCH/build'
-> Kernel output path: '/lib/modules/2.6.16-ARCH/build'
-> Performing rivafb check.
-> Performing nvidiafb check.
-> Cleaning kernel module build directory.
executing: 'cd ./usr/src/nv; make clean'...
rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv.o nv-vm.o os-
agp.o os-interface.o os-registry.o nvidia.mod.o
rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
rm -f -f stprof stprof.o symtab.h
rm -f -rf .tmp_versions
-> Building kernel module:
executing: 'cd ./usr/src/nv; make module SYSSRC=/lib/modules/2.6.16-ARCH/bui
ld SYSOUT=/lib/modules/2.6.16-ARCH/build'...
NVIDIA: calling KBUILD...
make CC=cc KBUILD_VERBOSE=1 -C /lib/modules/2.6.16-ARCH/build SUBDIRS=/opt/
nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv modules
mkdir -p /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/.tmp_versions
make -f scripts/Makefile.build obj=/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg
0/usr/src/nv
echo #define NV_COMPILER "`cc -v 2>&1 | tail -n 1`" > /opt/nvidia/NVIDIA-
Linux-x86-1.0-8178-pkg0/usr/src/nv/nv_compiler.h
cc -Wp,-MD,/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/.nv.o.d
-nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include -D__KERNEL__
-Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototyp
es -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -f
omit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -march=i
686 -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -Wno-point
er-sign -I/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv -Wall -Wimpl
icit -Wreturn-type -Wswitch -Wformat -W
char-subscripts -Wparentheses -Wpointer-arith -Wno-multichar -Werror -O -f
no-common -MD -Wsign-compare -Wno-cast-qual -Wno-error -D_LOOSE_KERNEL_NAM
ES -D__KERNEL__ -DMODULE -DNTRM -DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSION=1
-DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=8178 -UDEBUG -U_DEBUG -DNDEBUG -DNV_MU
LTIPLE_BRIDGE_AGPGART_PRESENT -DNV_PM_MESSAGE_T_PRESENT -DNV_CHANGE_PAGE_ATT
R_PRESENT -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)"
-D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /opt/nvidia/NVIDIA-Linux-x86-1.0
-8178-pkg0/usr/src/nv/nv.o /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/sr
c/nv/nv.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:47,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv.c:14:
include/linux/prefetch.h: In function 'prefetch_range':
include/linux/prefetch.h:62: warning: pointer of type 'void *' used in arith
metic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:522,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:71,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv.c:14:
include/asm/io.h: In function 'check_signature':
include/asm/io.h:258: warning: wrong type argument to increment
In file included from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv.c:14:
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv-linux.h:715:2: warn
ing: #warning "conftest.sh failed, assuming remap_page_range(4)!"
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c: In function 'nvo
s_get_agp_device_by_class':
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c:503: warning: imp
licit declaration of function 'pci_find_class'
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c:503: warning: ass
ignment makes pointer from integer without a cast
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c:517: warning: ass
ignment makes pointer from integer without a cast
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c: In function 'nv_
kern_mmap':
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c:1983: warning: im
plicit declaration of function 'remap_page_range'
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c: In function 'nvo
s_count_devices':
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c:3646: warning: as
signment makes pointer from integer without a cast
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv.c:3652: warning: as
signment makes pointer from integer without a cast
cc -Wp,-MD,/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/.nv-vm.o.
d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include -D__KERNE
L__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prot
otypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2
-fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -marc
h=i686 -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -Wno-po
inter-sign -I/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv -Wall -Wi
mplicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpo
inter-arith -Wno-multichar -Werror -O -fno-common -MD -Wsign-compare -Wn
o-cast-qual -Wno-error -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNTRM -
DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLEV
EL=8178 -UDEBUG -U_DEBUG -DNDEBUG -DNV_MULTIPLE_BRIDGE_AGPGART_PRESENT -DNV
_PM_MESSAGE_T_PRESENT -DNV_CHANGE_PAGE_ATTR_PRESENT -DMODULE -D"KBUILD_STR(
s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv_vm)" -D"KBUILD_MODNAME=KBUILD_STR(n
vidia)" -c -o /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv-vm.o
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv-vm.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:47,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-vm.c:14:
include/linux/prefetch.h: In function 'prefetch_range':
include/linux/prefetch.h:62: warning: pointer of type 'void *' used in arith
metic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:522,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:71,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-vm.c:14:
include/asm/io.h: In function 'check_signature':
include/asm/io.h:258: warning: wrong type argument to increment
In file included from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-vm.c:14:
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv-linux.h:715:2: warn
ing: #warning "conftest.sh failed, assuming remap_page_range(4)!"
cc -Wp,-MD,/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/.os-agp.o
.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include -D__KERN
EL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-pro
totypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2
-fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -mar
ch=i686 -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -Wno-p
ointer-sign -I/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv -Wall -W
implicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wp
ointer-arith -Wno-multichar -Werror -O -fno-common -MD -Wsign-compare -W
no-cast-qual -Wno-error -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNTRM
-DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLE
VEL=8178 -UDEBUG -U_DEBUG -DNDEBUG -DNV_MULTIPLE_BRIDGE_AGPGART_PRESENT -DN
V_PM_MESSAGE_T_PRESENT -D
NV_CHANGE_PAGE_ATTR_PRESENT -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAM
E=KBUILD_STR(os_agp)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /opt/nvid
ia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/os-agp.o /opt/nvidia/NVIDIA-Lin
ux-x86-1.0-8178-pkg0/usr/src/nv/os-agp.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:47,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
os-agp.c:24:
include/linux/prefetch.h: In function 'prefetch_range':
include/linux/prefetch.h:62: warning: pointer of type 'void *' used in arith
metic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:522,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:71,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
os-agp.c:24:
include/asm/io.h: In function 'check_signature':
include/asm/io.h:258: warning: wrong type argument to increment
In file included from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
os-agp.c:24:
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv-linux.h:715:2: warn
ing: #warning "conftest.sh failed, assuming remap_page_range(4)!"
cc -Wp,-MD,/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/.os-inter
face.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include -D
__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstri
ct-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding
-O2 -fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2
-march=i686 -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -
Wno-pointer-sign -I/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv -Wa
ll -Wimplicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -W
parentheses -Wpointer-arith -Wno-multichar -Werror -O -fno-common -MD -W
sign-compare -Wno-cast-qual -Wno-error -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -D
MODULE -DNTRM -DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION
=0 -DNV_PATCHLEVEL=8178 -UDEBUG -U_DEBUG -DNDEBUG -DNV_MULTIPLE_BRIDGE_AGPG
ART_PRESENT -DNV_PM_MESSAGE_T_PRESENT -DNV_CHANGE_PAGE_ATTR_PRESENT -DMODUL
E -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(os_interface)" -D"KBUI
LD_MODNAME=KBUILD_STR(nvidia)" -c -o /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-p
kg0/usr/src/nv/os-interface.o /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr
/src/nv/os-interface.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:47,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
os-interface.c:26:
include/linux/prefetch.h: In function 'prefetch_range':
include/linux/prefetch.h:62: warning: pointer of type 'void *' used in arith
metic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:522,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
nv-linux.h:71,
from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
os-interface.c:26:
include/asm/io.h: In function 'check_signature':
include/asm/io.h:258: warning: wrong type argument to increment
In file included from /opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/
os-interface.c:26:
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/nv-linux.h:715:2: warn
ing: #warning "conftest.sh failed, assuming remap_page_range(4)!"
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/os-interface.c: In fun
ction 'os_set_mlock_capability':
/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/os-interface.c:1375: e
rror: 'struct task_struct' has no member named 'rlim'
make[3]: *** [/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv/os-inter
face.o] Error 1
make[2]: *** [_module_/opt/nvidia/NVIDIA-Linux-x86-1.0-8178-pkg0/usr/src/nv]
Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [mdl] Error 1
make: *** [module] Error 2
-> Error.
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.

[SOLVED] module problems after kernel update

after update to linux-3.10.10-1 I cannot load some modules anymore:
modprobe: ERROR: could not insert 'tp_smapi': Exec format error
modprobe: ERROR: could not insert 'hdaps': Exec format error
modprobe: ERROR: could not insert 'vboxdrv': Exec format error
seems to be all thinkpad modules plus virtualbox. Probably these packages need an update to work with new kernel..?
Last edited by miro279 (2013-09-01 10:37:37)

Probably they do, yes. How exactly did you update? Did you do pacman -Su (or -Syu), or did you selectively update just some packages? You aren't supposed to update just parts of your system – if you do, weird things happen – such as your kernel suddenly not loading all your modules.
Last edited by Oxyd (2013-08-31 18:48:48)

Strange font problem after kernel update

Hi,
I recently did a pacman -Su system update which told me there was one new package available which was the kernel. I let it install and when i rebooted my fonts had kind of 'degraded' in kde. They're still usable but they now look like they haven't been rendered properly because of a dpi problem. However, xdpyinfo tells me my screen's at 92x96 dpi and i have all the 100 and 75 dpi fonts installed so i don't understand how this would happen. i even tried reinstalling the nvidia drivers in case it was the kernel module which needed rebuilding.
I never had this problem updating before although i have known pacman to remove things it shouldn't in the past so could it have deleted something??
Hope someone can shed some light on this for me
Dan

I solved that by resetting the parameter ram, as explained here: http://docs.info.apple.com/article.html?artnum=2238

Login problem after kernel update

I just finished updating all the support packs for an ecc 5.0 instance.
I restarted the system and everything seems to be working fine on the MMC but when I try to login through the SAP Gui I get the following error message: "internal tskh error"
Anyone know why this is happening or how I can fix it.
Thanks,

Hi Karim,
Can you post errors at dev_w0? That will help troubleshooting the problem.
Regards
Juan

After the new update, why does my Bluetooth keep turning itself on? I keep turning it off, but it still finds a way to turn itself back on

After the new update, why does my Bluetooth keep turning itself on? I keep turning it off, but it still finds a way to turn itself back on

hi Apfelwurm,
why do you say it's not normal.
it always switches itself on after i update. it just did again, this time for 7.1.2.. i t also will switch on after a restore.
i never use bluetooth and make sure it's not on for any other reason.
it's been noticed by others too.
http://www.forbes.com/sites/kashmirhill/2014/03/12/apple-keeps-turning-bluetooth -on-when-you-update-your-iphone/

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

After the update iTunes keeps crashing and won't play any of my music and keeps restarting my phone.

After the update iTunes keeps crashing and won't play any of my music and keeps restarting my phone.
Anyone else have this problem and resolved it?
Thank you!

Well, I hadn't rebooted after the 7.1.1 upgrade, but obviously I had to restart iTunes. After I rebooted my iBook iTunes worked... Maybe the 7.1.1 update should be marked with a must reboot?

Automatic recompiling of kernel module after kernel update.

Hello everyone,
i tried to search for it but without success...
my question is - is it possible to set it up somehow that aur package would recompile after kernel update?
The package I would like to rebuild is rt3090 which is module for my wifi card. It is very annoying to rebuild it manually. I know that my fglrx module does it automaticaly but how to set it?
Thank all of you for any advise.

Thank you :-) It looks ok, I will try DKMS as soon as I get some free time. If there was any problem, I would tell you.
BTW: I use catalyst mainly because of saving energy management, which is of course better for my netbook. My card is too new to be fully supported by the opensource driver.
EDIT:
I solved the situation by upgrading my system, I tried in-kernel module rt2800pci. In the previous kernels it didn't work well with my crappy ralink rt3090 wifi card, but that's been improved :-) so I do not need rebuild the package anymore even because this module isn't compatible with newest kernel.
I also learnt how to write my own hook from archwiki (https://wiki.archlinux.org/index.php/Mkinitcpio) so if the new module didn't work I would try it.
The final solution = replace module rt3090sta by rt2800pci.
Thanks! Arch has very powerful community :-)
Last edited by h@lf@rk (2012-06-02 18:34:17)

[Solved] Can not build modules for VMware Player after kernel updates

I have a problem generating the modules for VMware Player after kernel updates. I am using VMware Player version 5.02 (without patches) and the softlink according to the Wiki.
When I start the installation of the modules from the GUI, the program just closes. Running vmware-modconfig in the CLI generates the following log file:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Log for VMware Workstation pid=7478 version=9.0.2 build=build-1031769 option=Release
2013-04-29T09:49:27.891+01:00| vthread-3| I120: The process is 64-bit.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host is Linux 3.8.10-1-ARCH 2012.11.29
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-7478.log
2013-04-29T09:49:27.892+01:00| vthread-3| W110: Icon name must be set.
Interestingly, after deinstallation and reinstallation the VMWare Player works fine.
Any hint, what's going wrong?
Last edited by Thomas_Do (2013-08-07 07:25:51)

Today, (Kernel 3.10.5-1, VMware Player version 5.02 with kernel patches) the modules could successful be generated from the CLI:
vmware-modconfig --console --install-all
Solved (somehow).

Please Read This To Reduce or Eliminate Problems after Software Update

Hi all, I have been reading quite a handful of Mac users here reporting problems ranging from minor ones like slow downs to major ones like application crashes, and many of them blame the new OS and/or Security Updates.
Without learning more from the details of how did they perform their Software Updates and Install, I am making a huge assumption that it maybe something they did or didn't do, one of the key things they did not do is Repair Disk Permission
Below is what I called, the "ritual procedure" needed to perform before and after a Software Update, and also any other major software installation - to help reduce or eliminate "hiccups" afterwards, I cannot gaurantee that all macs all over the world will not suffer any problems after an update, but by doing so, you may help reduce it; I have 4 macs all together and so far I have not encounter any major problems after many versions updates.
Anyway, I didn't come out with this series of procedures, I read it off somewhere in this Discussion quite a while ago, and thought I share it again with all of you:
1.Before starting Software Update, unplug all external devices, FireWire, USB, hubs etc etc, not just turning them off but unplug the cables off your Mac, leave only your keyboard, mouse and internet connection on (unless you are using a wireless keyboard and/or mouse or on wireless internet)
2.Repair Disk Permission
3.Restart the Mac, then start your SU, do not run any other apps.
4.After finishing SU, restart your mac; If you are updating OS or Security Updates, Restart is required.
5.Repair Disk Permission again
6.Shutdown and re-plug in everything and start up your mac as normal.
I know the procedure is pretty long and "troublesome", especially the unplugging and restarting part, but so far it really has done my macs good, so I am going to "swear" by it... my FireWire, USB devices etc still work as normal.
This is really contrary to that "Macs are easy to use", yes, no doubt about it, but the software updates etc is just well, put it this way: The Mac OS when it comes to updates, is very very delicate... so handle with it great care, it will just turn out okay.
Cheers

Thank you for posting that. I posted a similar set of suggestions here:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

EFI Problems after last update anyway to downgrade ??

Hello
EFI Problems after last update anyway to downgrade ??
i have updated my MacBook 2010 EFI to MB71.0039.B0E which is 2.1 version
after updating to this version the Boot time become much slower when i want to change boot partition
and shutdown become very much slower and startup too
i tried to install Mac OS X Lion again but it doesnt help
can i downgrade to this version 2.0 ???
or when Apple will release the new version ?
or where can i send a feedback regarding this issues !!!!
Thanks

These are user to user forums. If anyone knows the answer, they will give it.
You can always call Apple support which may charge a fee or you can patiently wait for an answer here, which is free.

Share and save problem after latest update

hello,
i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app but problem is still and app doesn't work properly ) how can i downgrade to the old version ? Could you fix this problem quickly ?

i use app which called "aLogcat"
--------- beginning of /dev/log/main
I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
--------- beginning of /dev/log/system
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

Odd problem after Kernel update - Bluetooth keeps turning on

Similar Messages

Maybe you are looking for