ODD problem regarding certain clips at 0% speed.?

I have recently updated to Final Cut Pro 6 (and now 6.0.2) and I opened a project that I created with Final cut pro 5. I'm having a really wierd problem where only certain clips are changed to have a speed of 0% in the timeline. I think most of these are shorter clips that may have had their time adjusted before, but not to 0%!
Because they are at 0%, only one frame is showing up. If I downgrade to Final Cut Pro 5, it will open and play correctly, but I do not want to do that because I have new projects created with fcp6.
I have a power mac g5 dual 1.8 ghz running leopard 10.5.1
Any ideas or help would be appreciated! Thanks!

This is great, although my question is not at all about backwards compatibility, and more about "forwards" compatibility.
My project file that was created with fcp5 is not playing back correctly in fcp6. It is opening, but certain clips are being affected by having their speed changed to 0%, so I only am seeing one frame during playback...
Any ideas?

Similar Messages

Odd problem relating to processor speed

I'm hoping that there's some simple fix to this, because it's a simple problem in all honesty.
Usually, when using my iBook I often switch between the "Highest" and "Reduced" processor speed options, depending on what I'm doing, where I am, etc; however, recently a problem has popped up. The speed of the system seems to be "stuck" in Reduced mode, regardless of whether I put it into "Automatic" or "Highest" again. I've checked the temperature, and sure enough - it doesn't even go above 50-55 degrees Celsius, whereas on "Highest" it would happily go up to 70-73 degrees Celsius if I was needing the processing power.
I'm seeing formatting as an option, but would really rather not if I don't have to... Completely open to suggestions.

Try resetting the PMU. Do that by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Wait 5 seconds and start the iBook.

Why do certain clips (photos), viewed in preview, on Adobe Premiere 11 look different on YouTube?

Hi folks,
I've posted, via Adobe Premiere 11, two different music videos on YouTube and on my Facebook page. The first one, "Back In The Day", looks the same on YouTube (and Facebook) as it did when I viewed it (previewed it) on Premiere 11. But the second video, "Wicked World", that I posted on those internet sites, has certain clips (photos) that look different than what's seen on Premiere 11.
With "Wicked World", it almost looks like certain Panned & Zoomed photos are bigger in size than what the YouTube screen can show?
I used Pan & Zoom on some photos in both videos. But maybe with "Wicked World", I always set the "Hold" times to zero (0) when using Pan & Zoom on some photos. Or could it have something to do with the Track Size on the "Wicked World" Premiere 11 video? BTW, I see that by right clicking in an empty part of the track, the Track Size choices come up as small, medium or large.
Or is it something about upload choices on YouTube? Two different friends helped me with uploads to YouTube for each video, so maybe the first one, "Back In The Day", looks OK because that friend chose proper upload choices?
If you have time, or the inclination to see the difference for yourself, you can go on YouTube and type in on the search bar, "Wicked World Bob Fuchs". You'll see both a head shot of me playing harmonica for one YouTube choice, and a painting of Van Gogh as another way to get to the "Wicked World" problem video, and the "Back In The Day" good video.
Any help or suggestions would be much appreciated. Once I find out why "Wicked World" photos slide partly off the YouTube screen, I will delete it from YouTube and replace it with an issue free one.
I just want to learn what caused that, hopefully, so I can avoid that problem going forward.
Thanks!
Bob Fuchs
[email protected]

A.T.please note:
After sending you a previous email reply to your latest response, I am forwarding a new thought.
I just tried out something you had suggested. I think it may solve the issue I have with the panned & zoomed photos on my "Wicked World" video - the ones that look weird when I view the video on YouTube (and Facebook).
So, in case you also think the following may be the answer, I will now copy and paste relevant parts of my previous email, PLUS include my new thoughts - in order not to waste your valuable time looking into an answer I may already have.
Here goes:
The Premiere 11 Edit area monitor Magnification had already been set to "Fit".
In Edit Menu Preferences General, I already had a check mark on "Default Scale to Frame Size".
The properties of the first file (a Title screen) that I dragged into the Timeline are 1920 Horizontal, 1080 Vertical. But properties of subsequent photos, some of which I panned and zoomed, are mostly only around 648x599.
Upon viewing my "Wicked World" video carefully on YouTube, I see that what actually happens is that the box-like area where my video is shown (probably the same size of my Premiere 11 screen edit area?) is smaller than the YouTube's screen viewing area. That does not bother me. However, when the panned and zoomed photos occur, my smaller box area, within the YouTube screen, itself moves along with the panned & zoomed movement of the photos! That inner box moves slightly vertically, either up or down, and to lower right or left, depending on which direction the pan and zoom of each photo is going. And an empty border around the video area hangs there, within the YouTube viewing area.
So ... as you talked about, I tried something: I replaced an existing panned & zoomed photo (clip) in the Timeline with the same photo, and then I clicked on "Scale to Frame Size". The photo got bigger. I then did a new pan and zoom on it, and reduced the duration of how long that photo clip plays. Therefore, although the pan and zoom happens faster, it cues to the proper places in the music (audio) track. And I'm guessing that the larger "Scale to Frame Size" on that photo will now show properly in the YouTube viewing area, without the smaller inner box area moving too, along with the panned and zoomed photo?
I have only done this on one of my previously panned and zoomed photos in the video. But if you think this may solve the viewing issue on YouTube, that I described above, then I'll do the same with all the previously panned and zoomed photos in my video, and save it as a new version on Premiere 11.
I guess I'd then try and delete the existing "Wicked World" video from YouTube, and replace it with the new, hopefully issue-free version.
What do you think? Should I try this, and then replace the old one on YouTube?
Best Regards,Bob [email protected]

Odd problems with reading DVD media [concluded]

There is an odd problem I've encountered...(I'm not sure if its a bug with Arch Linux or Linux in general).
Firstly, the details:
* I've updated the systems (using "extra", "current", and "community" respositories). So its the current one (0.80 "Voodoo"). I'm NOT using "Unstable" respository.
* I've already added the user to the "optical" and "storage" groups. So there's no problems in relations to permissions.
* My fstab entries for the CD and DVD drives are default (I didn't touch them)...That is, "iso9660" and "udf" respectively.
* My desktop environment is KDE 3.5.5...And I have changed the behaviour of the desktop icons such that DVD media, CD media, and USB devices will have an icon pop-up as soon as you plug them in.
* I have "hal" loaded in the DAEMONS of /etc/rc.conf
* I'm using 4 different Linux systems with the following DVD burners.
=> Pioneer DVR-108
=> Sony DW-Q120A
=> Hitachi-LG GCC-4240N (DVD-ROM/CD-burner combo)
* There are three Sempron 2800+ (Socket 754, 1.6Ghz) boxes and the last one is on an IBM R40 ThinkPad, and I know you can't read DVD-R media on that. But it should be able to read DVD+R media without issue.
* Two of the Semprons are running Arch, as well as the ThinkPad. The final Sempron box is running Ubuntu 6.06.1
* When I installed K3b I did: pacman -S k3b dvd+rw-tools
* All the DVD media is Verbatim DataLifePlus ones.
Here's what I've done...
I've burnt two DVD media (they're just video files from last year's Blender 2006 conference thing, so its legal stuff).
One is a DVD+R and the other is DVD-R media. Both were done on a Windows 2000 Pro SP4 box using Nero 6.6.1.4
What's the problem?
Well, KDE in the Arch Linux boxes doesn't recognise the media!...There is no DVD icon that automatically pops up on any of the Arch Linux boxes!
When I run dmesg on the Arch boxes, the only relevant info I get is:
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
Now if I re-insert these DVD media onto an Ubuntu 6.06.1 LTS box...The DVD+R works perfectly! While the DVD-R does not.
When I run dmesg on this box, I get the following:
[17179654.808000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.808000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.808000] ide: failed opcode was: unknown
[17179654.808000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.808000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.808000] ide: failed opcode was: unknown
[17179654.808000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.808000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.808000] ide: failed opcode was: unknown
[17179654.812000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.812000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.812000] ide: failed opcode was: unknown
[17179654.812000] hdc: DMA disabled
[17179654.812000] hdc: ide_intr: huh? expected NULL handler on exit
[17179654.860000] hdc: ATAPI reset complete
[17179655.364000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179655.412000] ISOFS: changing to secondary root
[17179725.140000] Unable to identify CD-ROM format.
[17179729.348000] Unable to identify CD-ROM format.
[17181395.032000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17181395.032000] ISOFS: changing to secondary root
If I re-burn the data onto a DVD+RW, Arch and Ubuntu immediately sees it, and KDE (or Gnome in Ubuntu), will have a DVD icon popping up! I can view the video clips without issue!
Now here's the really odd part...
When I load up K3b on either Arch OR Ubuntu, they recognise all DVD media! (As in, they can read the media disc information!)...Tools => DiskInfo
If I click on the PIONEER - DVD-RW DVR-108 on the tree menu on the left side in K3b, (to view the contents of the DVD-R or DVD+R media), it can't read and pops up an error message informing about a read problem. It suggests I try dmesg|tail to see what's wrong.
When I do that, I get...
# dmesg|tail
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
I repeat the same procedure on DVD+RW, and it works perfectly!
Should I use another burning application instead of Nero on the Windows box?
Could it be the way I burn things?
(Some DVD+R and DVD-R are burnt with multisession while others aren't.)
Has anyone else experienced similar issues?
What are your "workarounds" or fixes?

It *should* work...But they don't.
I tried this...
mount -t auto /dev/dvd /mnt/dvd
I get this...
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I then do dmesg|tail
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
If I try this...
mount -t iso9660 /dev/dvd /mnt/dvd
I get this...
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I then do dmesg|tail
Unable to identify CD-ROM format.
If I stick in a DVD-R that is burnt in one go without multisession, I get this in the dmesg
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'SW', timestamp 2006/11/07 19:37 (1000)
It reads this disc perfectly and KDE pops up a DVD icon.
I'm scratching my head as I'm not sure what is the problem.
Could it be hal or the way the DVD media was formatted?

Multiclip angle goes black in viewer for certain clips

Hi all,
I have the strangest thing happening. I have two 45 min clips used in a multiclip. I edited the whole thing switching and cutting between the two and whatnot. So, now when I go back to it, on certain clips one camera angle will be blacked out in the viewer only (when multiple angles are showing in the viewer).
Also, under the playhead sync drop down menu in the top center of the viewer window, the 2nd camera angle isn't available as an option. It only see's the first one.
I wonder if this is a bug? It is extremely annoying because I can no longer switch camera angles for those clips.
Anyone else have this happen?

hey Pete
theres another thread I think you may already have spotted
http://discussions.apple.com/thread.jspa?threadID=213768&tstart=0
... anyway, in case not, the gist seems to be that rendering (manually or because of auto-render) whilst still building an active multiclip edit causes some problems with the playback.
try toggling off/on track visibility so as to lose any renders on the sequence (or copy and paste your cut into a new sequence, or using the Tools > Render Manager... to delete your renders for the sequence etc etc)
hope it helps
Andy

An odd problem when error handling

hi experts
I encountered a very odd problem when trying to show up an error message... and hope someone can help me out.
I defined a standard action in the view, and wrote some lines of code to check the input data in the predefined methodWDDOBEFOREACTIONwhich will call a method from component controller, and that method will call message_mananger->report_t100_message to show up an E type message if any error happened. But the problem is the program does not stop there but go into the action handler(ONACTIONACT_XXX).
I think it should actually stop and show up the message rather than get into the action handler because of the action is standar...
can anyone help?
many tkx

hi,
i went through your code.....the code is fine but as you told that it goes to the exception handler after coming to the message part ...this is because you are using
CALL METHOD LO_MESSAGE_MANAGER->REPORT_T100_MESSAGE
EXPORTING
    MSGID                     =
    MSGNO                     =
    MSGTY                     =
   P1                        =
   P2                        =
   P3                        =
   P4                        =
   MSG_USER_DATA             =
   IS_PERMANENT              = ABAP_FALSE
   SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
   VIEW                      =
   SHOW_AS_POPUP             =
   CONTROLLER_PERMANENT_MSG =
   MSG_INDEX                 =
   CANCEL_NAVIGATION         =
   ENABLE_MESSAGE_NAVIGATION =
RECEIVING
    MESSAGE_ID                =
this function will simply report that message but will not hold the control to the same screen..
so use
CALL METHOD LO_MESSAGE_MANAGER->REPORT_FATAL_ERROR_MESSAGE......
and tell me whether it solved the problem or not....
@ sarbjeet i think that Raise_T100_error is an obselete function...rite?
thanks and regards,
sahai.s

Problem deploying certain mappings using OMBPlus

We've got a problem deploying certain mapings using OMBPLus. This applies to all mappings that use a function to lookup the effective date of a SCD (type 2) from a lookup table. We use that function in the dimension operator properties as the "Default Effective Time of Open Record". Though the validation of those mappings fails they can nevertheless be deployed using the Control Center Manager. And, best of all, they work fine.
Now we have to deploy those mappings using OMBPlus because we're not allowed to work with tools on the preproduction and production systems. Deploying those mappings with OMBPlus doesn't seem to work. It works fine for all other mappings but not for those mentioned above. Has anybody a solution?
Regards,
Jörg

Hi Dave,
this is the error message I get whe I run my OMBPLus script:
OMB05602: An unknown Deployment error has occured for Object Type PUB03205 : Validation Error: MAP_DIM_FAHRZEUGKLASSE : VLD-5010: The Default Effective Date of open records for dimension DIM_FAHRZEUGKLASSE should be an expression of type DATE. Value "FCT_GET_AKT_LL_vmon()" is not a valid date: PLS-00201: identifier 'FCT_GET_AKT_LL_VMON' must be declared
I'm not quite sure about what you mean with creating a stub function. As you can see from the error message above I use a function called FCT_GET_AKT_LL_vmon that returns the actual date od the load from a lookup table. This function is of course present in the target schema.
Regards,
Jörg

Premier 7 Odd problem

This may be something someone out there can clue me in on !!! I am capturing from a non digital cam and using another program to capture and then getting the clips from that program into Premier , this part is no problem as long as I save to my PC as soon as I save to my external and try importing to premier , premier tells me it does not recognize the file why is that?? how can I change that?/

Good Day Hunt , happy thanksgiving to all!! I have tried the Gspot and the same codec comes up for both places of storage on my PC it comes as DIB(_RGB And On The Maxtor stirage device it is the same DIB(_RGB also states no codec needed Do Not know waht it all means but I go back to what You said earlier that the external HD is The problem , Is there an external that can handle this or all the same ?? John
From The Home Of JC & M
Date: Thu, 8 Oct 2009 18:50:15 -0600
From: [email protected]
To: [email protected]
Subject: Premier 7 Odd problem
OK, you have used the Corel program, so you have a file to test with. Get http://www.headbands.com/gspot and install it. When you open it, give it time to survey your system for properly installed CODEC's. Then, drag one of the Corel files to it, and read the details.
You might be able to get this info right from Corel, though probably not in great detail.
Here's a look at the G-Spot GUI.
http://forums.adobe.com/servlet/JiveServlet/showImage/12983/G-Spot_Screen_02.jpg
Good luck,
Hunt
>

Is It Possible To Delete Certain Clips From An Archive?

After successfully completing an Archive, I noticed there are certain clips that I will never use and would like to get rid of them. I realize that i don't have to import them into my Events but don't see a reason to have them taking up HD space. The Archive was built from a mini DV tape cassette which means they are already stored there. Is it possible to delete certain clips from an Archive? If so, can't figure out how to go about it. Any help would be greatly appreciated.

I would try this on a small archive first and on a duplicate, just to make sure you don't damage the entire archive by using this technique.
You can open an archive by right clicking on the archive icon and Show Package Contents. You should get a regular finder file structure. Find the files you want to discard, select them and Move to Trash. That should be all there is to it. I don't see where this should cause any problems, you should be able to import the files into FCPX without any problems (but** I have not tried this for myself — that's why I recommend trying this out on a duplicate archive first.)

An odd problem importing footage...ideas please!!

I'm having an odd problem with iMovie that has me stumped so far. I'm currently using a borrowed DVcamcorder to import my footage. So far I can only import footage that was taped using that exact camcorder. I have other footage, (also miniDV format) that was created on a different camera, and it won't import properly. It comes out very jumpy, almost as if the frame rate is off or it's not scanning the fields properly, playing only every other one. The camera also gives me a "clean heads" message that only appears when I try to use the "foreign" video. The heads don't need cleaning, and I've checked the frame rate. Does anyone have any ideas? I'm lost so far!!
I'm using an iMac G5, with iMovie HD.
Thank-you!

Welcome to iMovie Discussions!
It may be that the "foreign" tape (..i.e; not recorded in that camcorder you're using..) was recorded at LP (Long Play) - a slow tape speed - or even slower than LP.
This makes recordings on extremely narrow video tracks (..because the tape hardly moves forwards while the spinning recording head turns round..) which may not quite co-incide with the exact head position of another camcorder ..i.e; the tolerance is too fine to match properly.
Most manufacturers mention this ..in very obscure language.. in their camcorder manuals, saying that LP tapes from other camcorders might not play properly, or tapes recorded in LP mode might not play in other camcorders.
Most (all?) Sony DV camcorders will play back footage recorded faster than normal, on 'professional' 'DVCAM' recorders. These tapes move faster through the camera than ordinary DV, so they produce a wider track which is less likely to cause signal 'drop-out' failure. I don't know if other makes of camcorder can play back DVCAM material.
If the "foreign" tapes were shot at DVCAM speed (..e.g; on a Sony PDX10 camcorder, or similar), then although they should play back in other, normal 'domestic' Sony cams, they might not play back in another make of camcorder. Could these be DVCAM tapes?
Finally, it might also be that the "foreign" tape really is a Foreign tape: i.e; the recording was made to a different standard. So if it's an American-recorded (NTSC) tape and it's played in a UK (PAL TV system) camcorder, the frame-rate will be wrong, the number of scan-lines will be wrong, the colour info will be wrong, etc. [..But as you mention "fields", you probably know enough not to have made that mistake.]
NOTE: Ooops, sorry, Karl: we must have both been typing at the same time ..didn't mean to step on your toes.

Certain clips freeze in iMovie project

PLEASE PLEASE HELP
I am putting together a project in imovie and certain clips (the same ones each time) intermittently freeze when played back in the timeline but are fine if played back from within the event. The same clips also freeze if the project is uploaded to the Theatre.
The clips were filmed on a Flip mino HD and are .mp4 files. I have made projects before mixing both Flip and GoPro footage with no problems.
I have tried trashing the iMovie preference files but this has had no effect.
iMac (27-inch, Late 2012)
3.4 GHz Intel Core i7
32 GB 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048 MB
1.85TB Free Space on Hard Drive

OK
Part 1:
Then we know that the problem is in the video material You want to use.
- Note the name for each video clip You want too use
- Locate them
- Open one at a time in QuickTime-Player
- In QT-P press cmd+I (Command-key and I-key) / Open Inspector
Now read :
Movie formatted (CODEC) : nnnnnnnnnnnnnnnnnn
Frames per second : YY.yy per sec
Note this to each clip.
What does they read ?
So we find out howto convert them into a CODEC iMovie can use (YES QuickTime and VLC-player - can open many more CODECs than iMovie and iDVD can use.
Part 2:
Free Space on Start-up Hard Disk.
- When Your Mac starts-up it reads Mac OS from one hard disk (most often one has just one - Named Macintosh HD) and this You see as an icon up to the right hand corner of You screen (If not set to invisible) - open this by double clicking - or press cmd+F and a window oopens then in the frame of this most often bottom but can be top frame band - it reads - XX.xx Gb free space.
What does it say ?
Good Luck.
Yours Bengt W

Compressor crashes when it reaches certain clip

I'm having a confounding problem. I'm trying to do a 60min high quality M2v output of a 13 min short. I've never EVER had a problem doing this with the same piece. However for some reason when it gets to a certain clip Compressor crashes.
The clip has a Glint Effect (I think AE) that is completely rendered. I have dumped the effect and rebuilt it from scratch and rendered it again and again.
I'm not sure why this is happening all of the sudden.
Any ideas... anybody?
Thanks
Hugh

The only reason to suspect the OS is if moving windows in other applications causes the same crash.
Sorry not to be of more help, I've only seen crashes by touching windows in a few apps. ONe that bugs the crap out of me these days is Microsoft Entourage for the Mac, part of the Office 2008 suite. Not all the time, but sometimes, which makes debugging it impossible, touching the pullout device in the lower right of the app's main window will crash the application.
This is not related to anything except Microsoft's application, but that's just my isolated case; the same app on an identical Mac does not crash.
bogiesan

Wierd problem regarding JInternalFrames and OUTLINE_DRAG_MODE

Hi there,
I'm currently experiencing a strange problem regarding the use of a JDesktopPane and JInternalFrames.
Code may look as this, its a random Example as I encounter the same results no matter how I construct the Frame and so on:
public class Example extends JFrame{
    public Example() {
        this.setTitle("Example");
        this.setPreferredSize(new Dimension(800,800));
        this.setLocationRelativeTo(null);
        this.setDefaultCloseOperation(EXIT_ON_CLOSE);
        JPanel contentPane = (JPanel) this.getContentPane();
        contentPane.setLayout(new BorderLayout());
        JDesktopPane dp = new JDesktopPane();
        dp.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE);
        contentPane.add(dp, BorderLayout.CENTER);
        this.setVisible(true);
        JInternalFrame f = new JInternalFrame("not so cool", true);
        f.setPreferredSize(new Dimension(400,400));
        f.pack();
        dp.add(f);
        f.setVisible(true);
    public static void main(String args[]){
        Example ex = new Example();
}So, I'm currently using Netbeans and when I'm running any application/project with those settings from inside the IDE
theres absolutley no problem. As soon as I'm running the Jar file, the drawing of the "outlines" while resizing the InternalFrame
is kinda laggy and choppy as hell. I spent 2 hours of googling now and I still got no idea why thats the case, so I hope anyone
here can enlighten me.
The Java version installed is 1.6.0_10
regards, me

AndrewThompson64 wrote:
(shrugs) Maybe the IDE is using -Dsun.java2d.d3d=false? In any case, very few people around here provide support* for IDEs.
* Read that as 'speculate on why an IDE does it different - why it works in an IDE'Sir, seems like you got the point, I wasnt familiar with those command line options for the VM before, regarding Graphics options.
Working fine as soon as I disable D3D. Should've come to that myself but oh well -.-.
Thanks guys!

Problem regarding installation of drivers of hp m1005 mfp on windows 8.1(64 bit)

i am facing problem regarding the installation of the drivers on my new windows 8.1 pc.
i have already downloaded the full solution present on the website twice but found my efforts in vain.

Hello @naga_akkireddi , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

ODD problem regarding certain clips at 0% speed.?

Similar Messages

Maybe you are looking for