Odd RV042 behavior can someone help shed some light?

We have a group of 4 x RV042 routers linking the 3 branch offices back to the head office via VPN site to site tunnels. Also each of the sites has dual ISP connection, one from a cable provider and the other a DSL connection operating in smart link backup mode with tunnels configured for when each wan is active. In the past week one of the branch offices RV042 started failing over to the secondary DSL WAN link when the primary cable ISP WAN IP was expired and was being refreshed.
The odd behavior starts a few hours after the switch over, the system log reports that the router restarted but with no error reported and it shows the date being December 31 2002 beginning with a System Up message then the firmware message which is at 1.3.12.19 and establishes a connection with the primary WAN at this point I can ping the public IP but I cannot connect to the router nor can the users at the branch browse the web or establish VPN connectivity to the main office. This condition persists until the router is physically powered down and back on at which time it shows the correct date and time and all operations work well for the day. I must note the behavior seems to only occur between 5am - 7am so I want to believe that this behavior is tied to the ISP IP lease cycle, but it only affects one branch office with all offices using identical ISP's, setup and configuration.
Can someone help make sense of this situation as rebooting the router each day is becoming annoying?

Hi Garth,
Thank you for posting. I wish I had a brilliant explanation for you that would immediately solve the problem. Unfortunately I have not seen this before. There is a possibility that the configuration file is corrupt or has been changed inadvertently. I think I would set the router to factory defaults and manually reconfigure it. There is also the option of swapping the router for another. If the other router does the same thing it could point to an environmental issue. If this router does the same thing at the alternate location it could point to either a configuration or hardware issue.

Similar Messages

  • Can someone please shed some light on his log please?

    We are running Crystal and one of our customers can't launch the reportviewer java applet. This works for everyone else but them. I need to try and find out if this is a crystal problem or a java problem but don't know enough about the java log (from the client's machine) to make sense of it. We already have a call into crystal but it's starting to look like it either is a java error or a proxy/firewall error. Any help would be greatly appreciated.
    Thanks,
    Frank
    Java(TM) Plug-in: Version 1.4.2_06
    Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\xxxxx
    Proxy Configuration: Automatic Proxy Configuration
    load: class com.crystaldecisions.ReportViewer.ReportViewer not found.
    java.lang.ClassNotFoundException: com.crystaldecisions.ReportViewer.ReportViewer
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.UnknownHostException: reporting.xxx.com
    at java.net.PlainSocketImpl.connect(Unknown Source)
    at java.net.Socket.connect(Unknown Source)
    at sun.net.NetworkClient.doConnect(Unknown Source)
    at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
    at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    ... 10 more
    java.lang.ClassNotFoundException: com.crystaldecisions.ReportViewer.ReportViewer
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.UnknownHostException: reporting.xxx.com
    at java.net.PlainSocketImpl.connect(Unknown Source)
    at java.net.Socket.connect(Unknown Source)
    at sun.net.NetworkClient.doConnect(Unknown Source)
    at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
    at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)

    I whould focus on the line "Caused by: java.net.UnknownHostException: reporting.xxx.com"
    I would try using "nslookup" with this hostname on the problematic machine. You should get output something like:
    C:\>nslookup
    reporting.xxx.comNon-authoritative answer:
    Name: freexxxdotcomhosting.web1000.com
    Address: 66.28.153.26
    Aliases: reporting.xxx.com
    exitC:\>

  • Can someone please shed some light...

    I downloaded a few different apps onto my computer, i eventually managed to work out how to transfer them to my phone without too much trouble but when i press the icon to enter the app the screen goes blank for around 2 seconds as if its about to start but then returns to the homepage?
    Any help appreciated
    Mike

    I have the same issue, except that it's all the aps, not just one. Suggestions please?

  • Can anybody out there help shed some light on why no audio output using varispeed tempo only

    Can anybody out there help shed some light on why no audio output using varispeed tempo only?
    I am using Logic Pro 9 and finding no problems using the tempo and pitch option but when I just want to vari the tempo only I loose all output.
    This includes no audio meter activity on channells.

    Another worthwhile time/pitch related product is from Prosoniq. The version of Nuendo (not the latest) the University uses ships with the MPEX algorithm, which is related to to their flagship product.
    http://www.prosoniq.com/www/TimeFactory_II.html
    I've used it a bit to create the double-time/+1 octave  Les Paul & Mary Ford guitar sound for a class demo demo and thought it did a very good job.
    Yes, there is a Demo.

  • Can someone help with some coding on a muse HTML page that exported incorrectly?

    I run an NGO called warriors organization. It's an NGO trying to protect indigenous cultures in tanzania from loosing their cultures.. Our president is running a marathon In a week to raise money to build a school for maasai children.. and the marathon page got garbled on export from muse. Can someone help with recoding that page? I'm traveling and don't have the muse work file with me.. Any help is greatly appreciated.. Take a look at http://warriorsorganization.org/marathon.html. I have a screen shot of how the page should look. Contact me at [email protected]
    Thank you,
    Aric

    1. yes
    2. yes
    3. No. DVD players can't play BluRay discs -- even if they are burned to a DVD disc.
    4. 1080p50 is a perfectly legitimate mode for shooting, particularly if you're shooting video with a lot of action, since it has double the actual frames of 1080i50. However, your output video may or may not actually have 50p frames (or even be 1920x1080), depending on what form of media you're publishing as. The BluRay files that Premiere Elements outputs, for instance are 50i.

  • Can someone help with some quick questions?

    If someone has the time it would really help if I had the
    answers to the following questions. I appreciate they may be
    obvious or mundane to some but I am trying to set up a network at a
    primary school. I've searched the forum for answers with no luck.
    1. Where does Contribute save the settings of a provided key?
    2. Can the file(s) that contains those settings be copied
    over for other users to use?
    Thanks in anticipation

    Thanks for your reply. I'm actually using the software in a
    primary school and would like to use the stc key and thus the
    settings it creates and save them into a profile that each pupil
    user would then load up automatically. I would like to avoid them
    having to enter the details each time. It appears to work as the
    ntuser.dat file has been updated.

  • Can someone help with some basic answers on Premiere Elements 12

    I have used Premiere Elements in the past (up to Premiere Elements 9) but only once per annum to edit the past year's video of my Grandchildren. The change now is that I am using a Panasonic HC-V520 and have been shooting in 1080 50p. Premiere Elements 9 doesn't support this format I believe.
    My questions are:
    1     Can Premiere Elements 12 import and edit this format?
    2     If the answer is yes to question 1, can I mix older footage from my old Sony Camcorder with this newer footage for edit in Premiere Elements?
    3     Can I then output to either a Blu Ray disc to play on my DVD Player or an ordinary DVD disc to play on an older DVD Player which is not blu ray compatible?
    4     Am I wasting my time in recording in 1080 50p and should I instead be recording new footage in a different format?
    Thanks for any help you can give me.

    1. yes
    2. yes
    3. No. DVD players can't play BluRay discs -- even if they are burned to a DVD disc.
    4. 1080p50 is a perfectly legitimate mode for shooting, particularly if you're shooting video with a lot of action, since it has double the actual frames of 1080i50. However, your output video may or may not actually have 50p frames (or even be 1920x1080), depending on what form of media you're publishing as. The BluRay files that Premiere Elements outputs, for instance are 50i.

  • Can anyone shed some light on how to run window based application on mac air?  I must run Meta Trader 4 platform and MS Office.

    Hello,
    Can anyone please shed some light on how I can run MS Office and Meta Trader 4 platform on mac air.  I have been using Play on Mac and Wine for the past couple of weeks, but now suddenly it has stopped working, only crashing and giving me nightmares.  Is it juts best to install the latest Windows or Parallel?
    Regards Joe

    Meta Trader 4 is Windows only - Office is available for the Mac and Windows and are mostly compatible but given that you'll be doing online trading you may prefer the Windows version of Excel since there are financial spreadsheets with macros that only run on the Mac with some significant editing.
    You can install Windows 7 or 8 in BootCamp or any version of Windows usting virtualization. VMWare and Parallels are commercial programs and VirtualBox is open source. VB may be all you need. Whatever solution you choose, you'll need a commercial version of Windows (or get an OEM disc from NewEgg).

  • MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue)  I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

    Hello (hopefully someone can shed some light on my issue)
    I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
    a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
    I restarted the machine and this time a flashing question mark folder!
    could not do a thing.
    so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
    so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
    After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
    (interestingly since the RAID card had been removed the RAID UTILITY  from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
    O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
    but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
    thanks for your help in advanced.

    hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar  problem some one else had!
    working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
    and try to restart, hoping all was fine, this was not the case :-(
    I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
    so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
    ...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
    (nvidia geforce 8800gt 2x dvi).
    I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
    Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
    from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
    carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
    what was the cost to get this?  bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
    and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

  • I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files.  I have downloaded iMac library manager and can see them. can someone shed some light please ?

    i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
    and it's not reading the files.  I have downloaded iMac library manager and can see them.  when i go back into iphoto i'm getting the following message :
    Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
    I don't know what to do - please help !!!!
    can someone shed some light please ?

    So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

    when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

    Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
    Creative Cloud Help | Creative Cloud for desktop

  • Some of my photos in iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

    Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

    Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

    I'm assuming you have Photo Stream set up of both devices.  However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.

  • HT1657 I have rented some movies and have them in itunes. I want to move them to my iphone but don't know how can someone help?

    I have rented some movies and have them in itunes. I want to move them to my iphone but don't know how can someone help?

    http://support.apple.com/kb/HT1390
    Regards.

  • HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

    can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

    As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
    Try pairing the remote again:
    How to Pair your Remote to your Mac:
    http://support.apple.com/kb/HT1619?viewlocale=en_US

Maybe you are looking for