Odd Screen Brightness behavior

When I toggle the screen brightness keys, the status bar stops to notches short of all the way bright. When I open system prefs and slide the status knob all the way to the right, it stays at about 80%?
Weird?

Hi rahzel,
Welcome to the Lenovo Community Forums.
Regarding the Screen Brightness sliders, its not that they are not synching its just that they are not scaled right. As you have explained the PP (power plan) screen brightness slider when set at half, the corresponding PM (power management) slider is 3/4 full. I tried this with a different lenovo unit (B570) running Windows 7 and its the same thing. We have no option to change this since this is scaled by Windows 7.
The Lenovo Energy management It just gives you the option to toggle from the 3 power plans listed. Regarding the On screen indicator, I may suggest that you try to uninstall and reinstall the Lenovo Energy Management program. Check to see if this addresses the Onscreen indicator problem.
Let me know if this helps.
Don

Similar Messages

Odd Screen Saver Behavior

Usually, my iMac goes to sleep without a problem. Recently, I've noticed that my screen saver kicks in randomly from time-to-time. Having never even realized it had a screen saver, I was more than a bit surprised. I've now looked at its settings in System Prefs, which indicates that the screen saver should not kick in because the computer will go to sleep more quickly than the screen saver will start up. So now I'm totally confused -- that being the case, why does the screen saver ever kick in? Any and all thoughts appreciated.
Thanks!

It might be that you have an active corner enabled. Look in your System Preferences > Exposé & Spaces > Exposé Tab

'09 MBP with some odd screen anomalies

My MBP has some odd screen anomalies. They appear as small blotches of greyness and can only be seen clearly on a white background and when the backlight is bright. When viewed from a viewing angle almost parallel with the screen, one can clearly see the overall shape. They exist in an almost perfectly round ring around the center of the display with an average diameter of about 2.5 inches. The greyness is thickest on the top half of the ring. There is a distinct spot about half an inch above center and the lower semicircle is filled with random grey dots. It looks like, of all things, the Death Star if looked at straight on, or as if someone used the screen as a cupholder.
It doesn't look like image persistence or dead pixles. The anomaly does not move around or change colors, nor does it appear to get any better or worse with time.
I have no idea where it came from or why...
Anyone have any ideas?
Thanks!
/Tycho

do a pram reset http://support.apple.com/kb/ht1379 and then try verifying your icc color profiles with colorsync utility (verify and repair) found in your utlities folder in the applications folder.
This sounds hardware related though and you should take it in to an apple specialist. sounds like a ball hit it or someone punched it and the LCD is broken. can you still see it when you turn the screen/computer off?)

Reset SMC but Screen Brightness Keys still don't work

hi all.
i noticed after squinting at the screen all day yesterday that my screen brightness keys F1 and F2 on my mac pro keyboard are not working.
first thing i did was look in the UI for some kind of manual setting like for the Sound and i was not able to find one so the screen is still a bit dark for my needs.
then i /unchecked/ the "Use Function Keys as..." box in the Settings in case something was screwed up or changed there.
then i reset the SMC controller which i basically did by default (as i understand it) by shutting down the computer and unplugging it overnight during a thunderstorm.
now i am back at trying to solve this and i am wondering if i should reset the PRAM which i guess i will do but i don't want to have to bother with resetting all the settings on this if i don't have to.
any ideas on what may be going on? i have a 23" cinema display and a Mac Pro 1,1.
THANKS

Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
Resetting the System Management Controller (SMC)
Summary
In some situations, you may need to reset your computer's SMC. Learn how to identify these conditions and reset the SMC.
Products Affected
Desktop Computers, Portable Computers
Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
If your Mac appears to be running normally but isn't responding, force the computer to shut down by pressing and holding the power button for 10 seconds. Note: You will lose any unsaved work in any open applications. For Mac portables experiencing issues related to the MagSafe power adapter and/or battery, try:
Unplug the MagSafe power adapter from the Mac and the wall power socket for several seconds.
Shutdown the Mac. Physically remove and re-insert the battery (if it's removable) and startup the Mac.
If the issue is still not resolved after following the troubleshooting items above, an SMC reset may be necessary. After performing normal troubleshooting, these symptoms may indicate that an SMC reset may be necessary:
Fans
The computer's fans run at high speed although the computer is not experiencing heavy usage and is properly ventilated.
Lights
The keyboard backlight appears to behave incorrectly (on Mac computers that have this feature).
The Status Indicator Light (SIL) appears to behave incorrectly (on Mac computers that have an SIL).
Battery indicator lights, if present, appear to behave incorrectly (on portables that use non-removable batteries).
The display backlight doesn't respond correctly to ambient light changes on Mac computers that have this feature.
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
System Performance
The computer is running unusually slowly although it is not experiencing abnormally high CPU utilization.
Video
A computer that supports target display mode does not switch into or out of target display mode as expected.
A computer that supports target display mode switches into or out of target display mode at unexpected times.
Resetting the System Management Controller (SMC)
Resetting the SMC on Mac portables with a battery you can remove
Resetting the SMC on portables with a battery you should not remove on your own
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Additional Information
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs. These functions include:
Responding to presses of the power button
Responding to display lid opening and closing on portable Macs
Battery management
Thermal management
The SMS (Sudden Motion Sensor)
Ambient light sensing
Keyboard backlighting
Status Indicator Light (SIL) management
Battery status indicator lights
Selecting an external (instead of internal) video source for some iMac displays
https://support.apple.com/kb/HT3964

Restore imac screen brightness from Time Machine?

Hi
I am a professional photographer and I am constantly struggling with calibrating my image color and brightness. Just recently I got my proofs back from the printer and they were all too dark, no highlights and drab. This tells me that my screen is too bright and I am therefore adjusting my editing down too much which is resulting in darker/less bright photos...
Just for testing I went into a few photos and blindly edited up the brightness on them, even though they looked too bright on my screen. I got them back and they were much better. Problem is, dummy me, a day later tried to calibrate my monitor and moved the screen brightness. This makes the test prints I did not reliable now because the screen brightness is no longer constant.
Question- is there any way using time machine that I can go back to the day before I calibrated my screen to restore the original screen brightness? I don't want to change or restore anything else.
Thanks in advance,
Shannon

ParadoxInSoCal wrote:
My Mac lost power while I was in Mail. When I rebooted, my mail had lost all my Inboxes and accounts. I tried to restore from Time Machine, but I can't get all my accounts back. I have found all my stored emails in a Time Machine folder. Is there any way to go back to a previous version of Mail where it was all organized and intact? What I'm seeking specifically is for the numerous email accounts I had set up show up again under my Inbox.
Do the mailboxes appear in Mail, but are empty or incomplete? If so, I'd be inclined to start by selecting each mailbox in turn, then from the menubar, +Mailboxes > Rebuild.+ That may fix it without any further hassles.
If the mailboxes appear, but the rebuild doesn't recover all the messages, see #15 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
If the mailboxes don't appear at all, quit Mail and use Time Machine to restore the preferences file, then the messages, as in #15.
It's in <your home folder>/library/preferences/com.apple.mail.plist
If you were searching for it via a Finder search, you have to include +system files,+ as odd as that seems. But the easiest way to find it is to just navigate to it in your backups.

IPhone Screen Brightness

I don't know if anyone else has noticed it, but it seems like different iphones have different screen brightness. I compared my iphone with some iphones in the apple store and the screen was quite brigther at the max setting. Then I compared it with another person's iphone and my screen was slightly dimmer, or more "saturated" in color. Now, I have no problems with my screen. It is bright enough, but it just seems odd that the brightness of the screens is not the same throughout. Are my eyes are playing tricks on me or is this something that some of you have also observed?

Your absolutely right I have also notice several differences in some iPhones. For example, the two that I have purchased a month apart from each other are dramatically different. I don't know how it happened but the one I got at launch had a soft screen that left discoloration marks, similar to a standard LCD screen, when a little finger pressure was applied. The battery life indicator rarely reached full charge. Additionally, the multi-touch grid points can clearly be seen behind black backgrounds i.e. the home screen. I also experienced glitches with the unit from day one. Mainly application hang-ups which left me little choice but a hard reset. A total of 16 hard reset since June 29. After attempting the software update (which I thought would cure all ills) earlier this week, the unit hung up on the boot logo for good. So after 30-days with this unit I returned to the 5th Avenue and asked that the unit be exchanged. They said no, they could only send it out for repair. I simply reasoned that it was illogical to repair an already defective item. The manager agreed and kindly swapped the unit for me.
All I could say is...Wow! I didn't know what I was missing. This new unit has a hard screen with no grid points, battery OK, Apps seem to be more responsive, and no hang-ups so far. Good luck to all.

Default Screen Brightness

I installed a fresh copy of Leopard. I have changed screen brightness and want to restore it the way it was before I changed it. I tried looking in my Preference folder, but no avail. I know it may sound a bit odd but I just want it back. I know for my sound setting, it is 11 blocks from the left.

It is not a "trouble" really. I do not know if the brightness is too high when booting the computer. I will see to see how many "blocks" it occupied. No I have not checked in Snow Leopard forum, I thought my issue is realated to the MacBook than the software? Should I consider posting it there?

MacBook Pro 13" screen brightness

I just bought a 13" MacBook Pro and find the screen brightness and contrast is much less than expected. It basically has to be turned up full on AC to be acceptable, which is very unexpected, since I am typing on a 16 month old MacBook Air now that is about the same at 80% of screen brightness. The contrast is less pronounced on the new machine, too, and the notion of 60% more color saturation seems faulty. I am going to return it and see if the Apple Store thinks this is normal or a faulty screen. Am I being unreasonable to think the new MBP screen should be at least equivalent to the original Air screen?
Message was edited by: MacBook

Yes, I agree that there is something different about the two displays. I conducted my own side-by-side comparison -- in the same room lighting, and also switching the places of the two machines -- and found at any given setting, the 13" MacBook Pro was darker than the MacBook Air. Furthermore, when I first started the machine, the MBP's keyboard backlighting would not go off, no matter the lighting. Then, when I went to make these comparisons, the MBP's keyboard backlighting would not come on.
This linked picture is a composite from two pictures taken in succession in the same lighting and angles, just as they came out of the camera, showing the relative brightness of the two. http://farm3.static.flickr.com/2547/3844348963e76728bce2o.png
So, I packed up the machine for a trip to the Apple Store and either an exchange or a return.

Satellite A100 (PSAA9): Win7 + screen brightness adjustment issue

Hi
I have installed Windows 7 64-bit on my toshiba A100 (psaa9) machine, and i cannot modify screen brightness anymore.
It is maximum brightness always. Fn key does not work, and neigther i can modify the brightness manually through nvidia control panel. nvidia driver is 7.15.11.7967, installed automatically with windows.
In a similar thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=182780
i've read suggestions about Value Added Package to be installed, but there is no package like this for my model.
how can i fix my problem?
thanks

hi all,
thank you for reply!!!
ok, i tried to install VAP and Flash Card Utility for Satellite L500. first, installing Flash Card Utility i got invalid serial number error. i've read in forum that it might be due to inappropriate driver for my version on laptop or if i did not install VAP first. so, second, i tried to installed VAP, but i get value "Setup tvap error 0x8146045B" :(
according my display driver: it was nVidia driver automatically installed with win7. in fact there is no display driver for win7 64bit version on toshiba website... i guess i have more problems with display, as my secondary display blinks every time some system event like driver/program installation or usb device plugging-in or -out happens.

Windows 8 Pro Upgrade Problems (Switchable Graphics, Screen Brightness Adjustment, etc.)

Hi guys! I hope you can help me with this.
My laptop is a Lenovo U400 bought last April. I upgraded it yesterday to Windows 8 Pro.
The Upgrade Assistant detected incompatibilities on the following softwares (I'll be mentioning only those I had problems with after the update.)
-AMD Catalyst Install Manager
-Catalyst Control Center
-Lenovo Energy Management
-Cypress Trackpad
After the update, the following problems occurred
-Windows kept prompting me about the incompatibility of Catalyst Control Center and Lenovo Energy Management
-When I check the Device Manager -->Display Adapters, My AMD Radeon HD 6470M was changed to HD 7400M and has an exclamation point on it indicating a problem. When check Properties it says, "Windows has stopped this device because it has reported problems. (Code 43)"
-I can't manage switchable graphics because the AMD Radeon driver has been stopped by the OS and Catalyst Control Center doesn't work. It says, "Catalyst Control Center cannot be started. There are currently no settings that can be configured using Catalyst Control Center."
-My touchpad works but does not support multitouch functions.
-Screen brightness adjustment stopped working both on hotkeys and Power Options.
I tried the following actions to fix the problems:
-Downloaded the new softwares from Lenovo Support but the Catalyst Control Center and Cypress Trackpad still doesn't work. I also tried installing driver software from the AMD site but it still didn't work. [FAILED]
-I tried to use the Cypress Trackpad software for U300s/e and it fixed the problem with the touchpad [FIXED]
-Installed the Energy Management software for Windows 8 but when I click the 'Optimized Battery Health' button, it keeps reverting back to 'Maximum Battery Life'. [PARTIALLY FIXED]
-Resorted to 3rd party software to fix the Switchable Graphics (Catalyst 12.11 Beta from leshcatlabs.net) and it fixed the switchable graphics problem as well as the Catalyst Control Center problem. This is temporary until a working solution or update is available. [TEMPORARILY FIXED]
-All actions trying to fix the Screen brightness adjustment didn't work. [FAILED]
Please do help me on this. Thanks in advance!!!

Yes I own U400 too and I'm using it now. To many forums been read, can't remember which one. Basically, u have to clean AMD and Intel drivers that come along with Win 8. Why? Because the Win8 driver database will lead the device ID "DEV_6760" (if you looking at display adapter device properties) to HD 7400 series instead of HD 6470M, again why? At the bigining only the HD 7400 series already "certified" by Microsoft, while the 6470M out of somewhere. Current CCC (or else) + 6470 drivers, contain also driver for 7400 series in same packages (at least until now, hopefully near future they will release an update). So you can gues where the windows will lead to? Yes 7400 series (certified one). This will explain also why the Energy Management didn't work to= "missing identifier" or we can say "hardware not match".
You have to find a "fix" driver which contain only HD 6470M and install it manually trhu "Have Disk" option, after you claan all AMD and Intel driver. If you success, then install the CCC from Lenovo Support and from ATI ( I use 12.11 Beta8 Net4 CCC - this is a must), but remember to unchek the AMD Display driver when you install both CCC, and leave the rest checked including Intel Component. Then you can download install anything you want =).
Leschat's driver did't work on my and "harm" the system. Believe it or not, I found the AMD 6470M standalone driver on HP website. They call it "SoftPack", which actually contain CCC software.
It's quite tricky thing, that's why not everyone willing to try. But I think it's worth to try, as the risk is not too deep, just backup anything befor you do it. Cheer

[FIXED] after upgrade ACPI can no longer change my screen brightness

EDIT: never mind, it seems to of gone away now...i have no idea what happened, it stopped working randomly then started working just as randomly.....whatever...
Just yesterday i was using my laptop with arch linux with the brightness turned all the way down, as of course it saves battery
but now i turn it on today and the screen is at maximum brightness, and every time i try to change it it just says (in kernel.log) :
Sep 8 10:28:46 Polygon kernel: ACPI: Failed to switch the brightness
Sep 8 10:28:46 Polygon kernel: ACPI: Failed to switch the brightness
so...what got upgraded that broke this? does anyone else have this problem?
here is the past few days of my pacman.log: (it has some entries for kernel-my, a custom compiled kernel, but i get no screen brightness control on my custom compiled kernel, or the default arch one)
[2009-09-01 11:24] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:24] installed kernel26-my (2.6.28-1)
[2009-09-01 11:25] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:25] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:26] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:26] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:29] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:29] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:30] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:30] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:34] removed kernel26-my (2.6.28-1)
[2009-09-01 11:34] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:34] installed kernel26-my (2.6.28-1)
[2009-09-01 11:38] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:38] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:40] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:40] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:40] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:40] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:42] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:42] upgraded kernel26-my (2.6.28-1 -> 2.6.28-1)
[2009-09-01 11:46] removed kernel26-my (2.6.28-1)
[2009-09-01 11:47] >>> Updating module dependencies. Please wait ...
[2009-09-01 11:47] installed kernel26-my (2.6.28-1)
[2009-09-01 12:21] installed rsync (3.0.6-1)
[2009-09-01 12:21] installed abs (2.3.3-1)
[2009-09-01 12:32] installed nvidia_arch-mark-grandi (185.18.36-1)
[2009-09-01 13:01] synchronizing package lists
[2009-09-01 13:02] starting full system upgrade
[2009-09-01 13:03] upgraded python3 (3.1-2 -> 3.1.1-1)
[2009-09-02 09:22] synchronizing package lists
[2009-09-02 09:23] starting full system upgrade
[2009-09-02 09:23] upgraded coreutils (7.4-1 -> 7.5-1)
[2009-09-02 09:23] upgraded libarchive (2.7.0-2 -> 2.7.1-1)
[2009-09-02 09:23] upgraded module-init-tools (3.8-1 -> 3.10-1)
[2009-09-02 09:23] upgraded raptor (1.4.18-1 -> 1.4.19-1)
[2009-09-02 09:23] upgraded redland (1.0.8-3 -> 1.0.9-1)
[2009-09-02 09:23] upgraded syslog-ng (3.0.3-2 -> 3.0.4-1)
[2009-09-02 12:11] removed kernel26-my (2.6.28-1)
[2009-09-02 12:30] >>> Updating module dependencies. Please wait ...
[2009-09-02 12:30] installed kernel26-my (2.6.28-1)
[2009-09-02 12:52] removed nvidia_arch-mark-grandi (185.18.36-1)
[2009-09-02 12:53] installed nvidia_arch-mark-grandi_ver2 (185.18.36-1)
[2009-09-03 10:23] synchronizing package lists
[2009-09-03 10:24] starting full system upgrade
[2009-09-03 19:34] synchronizing package lists
[2009-09-03 19:35] starting full system upgrade
[2009-09-04 09:08] synchronizing package lists
[2009-09-04 09:09] starting full system upgrade
[2009-09-04 12:27] synchronizing package lists
[2009-09-04 12:27] starting full system upgrade
[2009-09-04 12:28] upgraded apr (1.3.8-1 -> 1.3.8-2)
[2009-09-04 12:28] upgraded damageproto (1.1.0-2 -> 1.2.0-1)
[2009-09-04 12:28] upgraded dmxproto (2.2.2-2 -> 2.2.99.1-1)
[2009-09-04 12:28] upgraded fontsproto (2.0.2-2 -> 2.1.0-1)
[2009-09-04 12:28] upgraded videoproto (2.2.2-2 -> 2.3.0-1)
[2009-09-04 12:28] upgraded xf86dgaproto (2.0.3-2 -> 2.0.99.1-1)
[2009-09-04 12:28] upgraded xf86vidmodeproto (2.2.2-2 -> 2.2.99.1-1)
[2009-09-04 12:28] upgraded xineramaproto (1.1.2-2 -> 1.1.99.1-1)
[2009-09-04 12:29] installed pyxdg (0.17-1)
[2009-09-04 12:29] installed setuptools (0.6c9-2)
[2009-09-04 12:29] installed libtorrent-rasterbar (0.14.4-2)
[2009-09-04 12:29]
[2009-09-04 12:29] >>> Deluge's daemon is running with the "deluge" user. The default download directory is /srv/deluge/
[2009-09-04 12:29]
[2009-09-04 12:29] installed deluge (1.1.9-2)
[2009-09-04 12:29] installed python-chardet (1.0.1-2)
[2009-09-04 19:58] synchronizing package lists
[2009-09-04 19:59] starting full system upgrade
[2009-09-06 12:47] synchronizing package lists
[2009-09-06 12:48] starting full system upgrade
[2009-09-06 12:48] upgraded cloog-ppl (0.15.3-1 -> 0.15.7-1)
[2009-09-06 12:48] upgraded gnupg (1.4.9-4 -> 1.4.10-1)
[2009-09-06 12:48] upgraded gstreamer0.10-bad (0.10.13-1 -> 0.10.14-1)
[2009-09-06 12:48] upgraded gstreamer0.10-bad-plugins (0.10.13-1 -> 0.10.14-1)
[2009-09-06 12:48] upgraded gstreamer0.10-good (0.10.15-3 -> 0.10.16-1)
[2009-09-06 12:48] upgraded gstreamer0.10-good-plugins (0.10.15-3 -> 0.10.16-1)
[2009-09-06 12:48] upgraded libdrm (2.4.12-1 -> 2.4.13-1)
[2009-09-06 12:48] upgraded libfontenc (1.0.4-2 -> 1.0.5-1)
[2009-09-06 12:48] upgraded libice (1.0.5-1 -> 1.0.6-1)
[2009-09-06 12:49] upgraded libpciaccess (0.10.6-1 -> 0.10.8-1)
[2009-09-06 12:49] upgraded libxau (1.0.4-1 -> 1.0.5-1)
[2009-09-06 12:49] upgraded libxcursor (1.1.9-2 -> 1.1.10-1)
[2009-09-06 12:49] upgraded libxinerama (1.0.3-2 -> 1.0.99.1-1)
[2009-09-06 12:49] upgraded libxxf86dga (1.0.2-2 -> 1.0.99.1-1)
[2009-09-06 12:49] upgraded libxxf86vm (1.0.2-1 -> 1.0.99.1-1)
[2009-09-06 12:49] upgraded man-db (2.5.5-2 -> 2.5.6-1)
[2009-09-06 12:49] upgraded mesa (7.5-2 -> 7.5.1-2)
[2009-09-06 12:49] upgraded nss (3.12.3.1-1 -> 3.12.4-1)
[2009-09-06 12:49] upgraded pixman (0.14.0-2 -> 0.16.0-1)
[2009-09-06 12:49] installed rasqal (0.9.16-1)
[2009-09-06 12:49] upgraded redland (1.0.9-1 -> 1.0.9-2)
[2009-09-06 12:49] upgraded xf86-input-synaptics (1.1.2-2 -> 1.1.3-1)
[2009-09-06 12:49] upgraded xorg-font-utils (7.4-2 -> 7.4-3)
[2009-09-06 12:49] upgraded xorg-server (1.6.3-4 -> 1.6.3.901-1)
[2009-09-06 17:54] synchronizing package lists
[2009-09-06 17:54] starting full system upgrade
[2009-09-07 12:06] synchronizing package lists
[2009-09-07 12:07] starting full system upgrade
[2009-09-07 12:07] synchronizing package lists
[2009-09-07 12:07] starting full system upgrade
[2009-09-07 12:07] upgraded alsa-lib (1.0.20-1 -> 1.0.21-1)
[2009-09-07 12:07] upgraded alsa-utils (1.0.20-2 -> 1.0.21-1)
[2009-09-07 12:07] upgraded hdparm (9.21-1 -> 9.26-1)
[2009-09-07 12:07] upgraded usbutils (0.84-1 -> 0.86-2)
[2009-09-07 13:15] installed gedit-plugins (2.26.2-1)
[2009-09-07 17:43] synchronizing package lists
[2009-09-07 17:44] starting full system upgrade
[2009-09-07 17:44] Install jack-audio-connection-kit, libsamplerate, ffmpeg
[2009-09-07 17:44] or pulseaudio to get their respective plugins working
[2009-09-07 17:44] upgraded alsa-plugins (1.0.20-1 -> 1.0.21-1)
[2009-09-07 17:44] upgraded gnupg2 (2.0.12-1 -> 2.0.13-1)
[2009-09-08 10:18] synchronizing package lists
[2009-09-08 10:19] starting full system upgrade
[2009-09-08 10:22] upgraded fftw (3.2.1-1 -> 3.2.2-1)
[2009-09-08 10:22] upgraded fuse (2.7.4-3 -> 2.8.0-1)
[2009-09-08 10:22] upgraded gparted (0.4.6-1 -> 0.4.6-2)
Last edited by Polygon (2009-09-10 01:51:39)

Do you happen to know what package broke this? I had this issue a couple weeks ago, and just recently it reappeared.

Flashcards for screen brightness no longer work after BIOS upgrade

I have a Toshiba Satellite T135D/1320S laptop, and last night I upgraded the BIOS to v1.90 under the recently released recall notice. AFter installing the BIOS, however, the Flashcard brightness controls no longer work. Whenever I press FN-6 or FN-7, the screen brightness Flashcard pops up and the toggle on the slider bar moves back and forth, but the brightness of the screen does not change.
I have disabled and re-enabled the Flashcards as suggested in a separate forum, and I've also downloaded the most recent display driver (AMD display driver v8.615). Neither effort corrected the problem.
Anyone have any other suggestions?

Satellite T135D-S1320
Sometimes it helps to reset the machine. With the battery and AC adapter removed, close the Power switch for half-a-minute. Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
Another things to try is reinstalling the TVAP.
Toshiba Value Added Package for Windows 7 (64)
-Jerry

Dell L501x Screen Brightness

I've gotten most things working on my new laptop but I can't seem to figure out how to adjust my screen brightness.
The first thing I noticed was that there was no /proc/acpi/video directory. So I searched for where it might be:
~ $ find / -iname *brightness* 2>/dev/null
/sys/devices/virtual/backlight/acpi_video0/brightness
/sys/devices/virtual/backlight/acpi_video0/actual_brightness
/sys/devices/virtual/backlight/acpi_video0/max_brightness
/sys/module/video/parameters/brightness_switch_enabled
/usr/lib/gegl-0.1/brightness-contrast.so
/usr/share/laptop-mode-tools/modules/lcd-brightness
/usr/share/gtk-doc/html/libgimpwidgets/stock-tool-brightness-contrast-16.png
/usr/share/gtk-doc/html/libgimpwidgets/stock-tool-brightness-contrast-22.png
/etc/laptop-mode/conf.d/lcd-brightness.conf
The first three seemed like they might be useful since they are similar to the ThinkPad brightness values here: https://wiki.archlinux.org/index.php/La … brightness. Each one has only the number 15 in it. When I try as root to do
echo -n X >/sys/devices/virtual/backlight/acpi_video0/brightness # X being replaced by any number from 0 to 15
I get:
bash: /sys/devices/virtual/backlight/acpi_video0/brightness: Permision denied
I have tried setting laptop-mode-tools to automatically echo different numbers when I unplug my laptop but they don't do anything. If you might be able to point me in the right direction, or know how to change the brightness on the Dell L501x, I'd greatly appreciate the help.

Lothium wrote:
Yes exactly... I have the i7 and no integrated intel graphics... Sorry that I can't help you with this.
Just another thing: Do you get the synaptics touchpad work well? For me it works, but when I try to use two finger scroll, I can't use it when I lay my two fingers at the same time on the touchpad. I have to lay them one after another on the touchpad to use two finger scroll. Do you have the same problem or found a solution for this?
Best regards!
I own a Dell L401X i7 with Nvidia GT 425m and my touchpad also has problem. I use gpointing-device-setting to enable two finger scrolling. Sometimes it worked pretty well, sometimes when I put two fingers on the touchpad, my mouse jumped all over the screen. I don't know why.
Another thing I notice with this laptop is that my touchpad lock key does not work anymore (it used to work with the fresh installation of Arch)
If you find the solution to these, please share!
PS: I don't why to hijack this thread of CanadaRox, I just want to share some problems some of you guys out there who is owning the same Dell laptop line.

Screen brightness OSD not working after 7 clean install

Hi all,
I just did a clean install of Windows 7 on my T400. Initially, none of the OSDs were working (volume, led light, screen brightness). But, I found this thread--http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/On-Screen-Display-feature-no-longer-works-i...--and downloaded the Hotkey drivers. This brought back the volume and led OSDs, but not brightness. Additionally, for some reason now the screen does not get nearly as dim as it used to.
Am I missing something obvious? Thanks!
Solved!
Go to Solution.

Fantastic. FIxed the problem. Thanks so much for your help!

[Solved] Screen brightness control issue

I just purchased a Lenovo T410s. I have set it up to only use Nvidia and only give visibility to the Nvidia GPU. The problem I have is once X starts I can no longer change the screen brightness with the function keys. I'm using KDE and it registers that I'm trying to change the brightness but the screen never changes. If switch to run level 3 I can use the function keys to change the brightness without an issue. I'm confused at what is causing the issue. I'm not sure what information you need to help me, but I will give you what you need if you tell me.
EDIT: I discovered on the Nvidia forums that the backlight function was disabled in the drivers for this model. Apparently when in use it causes squealing sounds.
Last edited by migizi (2010-12-09 13:15:40)

I did some more testing and here is what I found out. I switched my laptop to use integrated GPU only, so that means Arch sees my GPU as the Intel HD. Now I can boot X and control my brightness with the functions keys. Has anyone else run into the problem with Nvidia drivers and the Quatro NVS 3100m GPU?

Odd Screen Brightness behavior

Similar Messages

Maybe you are looking for