Odd 'shadow' type artefact on the screen. ONly in the 'black' or 'key'

I notice a ribbon shaped artefact roughly in the middle of my screen. It was only visible ata first agaisnt the grey background in iphoto.
So, I did a screen test- which turns to screen pixels to 100% red or blue or green etc.
The arefact was not visible at all on any of those test.
Only when the 'black' is tested, ie all pixels set to RGB (0,0,0) was it clearly visible.
Any idea what it might be? It is the only fault I can pick with the machine.

I remember way back when I got my first Mac I was using with a desk lamp on and I looked at the screen and thought there was a weird shadow in the middle. It turned out to be light shining through the Apple logo. Try covering the Apple logo with a folder or something and see if it goes away.

Similar Messages

IPhone 5c was powered off; when turned back on screen only shows in black and white. Have tried several times with no success. Any suggestions?

I purchased the iPhone 5c about 4 months ago. I turned it off briefly last night and when I turned it back on, the screen wallpaper and app icons are now in black and white. I have tried turning it off and on again several times with no success; screen still shows only black and white. All other functions of phone/text work correctly. Any suggestions on what to try?

Hello Teri,
You may have greyscale turned on. Try going to Settings > General > Accessibility and toggle that off and it should go back to color. Check out the page below for more information.
Invert Colors and Grayscale
http://help.apple.com/iphone/8/#/iph3e2e1fb0
Regards,
-Norm G.

IPhone 4S only displays in Black and White. How do you restore color?

I have an iPhone 4S. The screen only displays in black and white. How can I restore the color to the display screen?

Triple click the home button to switch of the greyscale feature.
Turn Greyscale on or off. Go to Settings > General > Accessibility > Gtreyscale. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 139.
Accessibility Shortcut
Use the Accessibility Shortcut. Press the Home button quickly three times to turn any of these features on or off:
VoiceOver
Invert Colors
Grayscale
Zoom
Switch Control
copied from page 150 of the user guide iOS8

Transaction type to dispose the asset only for the depn areas 01 and 02

One of the Company codes XXXX plant XXXX has an isuue for asset # XXXXXXXXXX-0 this asset was partially retired in Nov.2008 and now its acquisition value is JPY312,428
which should not be an asset under US GAAP but qualify for asset under Tax book . So it needs be removed from US and JCC book(01 and 02 area) but keep the record on the Tax book(area 15).
Is there any transaction type to dispose this asset only for the 01 and 02 area but keep the historical data for 15 area?
Thanks for helping in advance

Can I suggest you a way to handle this? Just give a try and see whether it works for you or not.
Post a Credit entry to the Asset only to the area 01 and 02. Please follow the below steps before you do this.
1. Go to main SAP screen => System => User profile => Own data => Parameters
Add parameter ID FAA_FB01_AREA_SWITCH (Turn On Value Entry at Area Level for FB01) and mark "x" against it in Parameter value. Save this changes.
2. Go to F-02, Enter the Asset number (posting key 75 and transaction type 105, which ever you feel like) and then in the next screen, enter the amount. Here in this screen, you will find a tab named area values. Click that tab and change the values Area 01 & 02 to $0.01 and leave the Area 15 as it is. Enter the appropriate dr line item and save the document.
3.Go to AW01N and see tha values against each of the areas.
please revert in case you have any questions.

How to hide the Condition types in item condition screen in Sales Order ?

Hi Experts,
We got new requirement from the Client. Pricing Condition types are ZZBG, ZPBG, ZPBA, ZFSG, ZBDG and ZBHG part in Pricing Procedure. These condition types have Condition records. These need to be hidden in Item conditions screen in Sales Order but other status of the conditions remain unchanged. Pleas provide me the solution earliest How this we can achieve in a best way.
Best Regards,
Srikith

Hi Srikanth,
You can achieve this using CONDITION EXCLUSION.
Maintain Condition exclusion for first condition type its Exclude the condition types which are below to that.
You must set a condition exclusion indicator for the price. You can do this in two ways:
If you want to set the condition exclusion indicator a follows then you specify it:
1..for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
2.for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
Hope this will helps you
Dasaradha

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video. When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I loaded windows 7 and now when i try to type my password to log on to windows, the only button that does anything is the caps lock key, nothing else is inputting

i loaded windows 7 and now when i try to type my password to log on to windows, the only button that does anything is the caps lock key, nothing else is inputting

Lower left of Login screen is icon for ease of access where On-Screen Keyboard can be selected. Use the mouse.

When I power up my ipad air the apple logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough.

When I power up my iPad Air the Apple Logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough to get to the home page. The lock screen just disappears. I have to hit the sleep/wake or home button to bring the lock screen back up so I can swipe it. Have others found this situation with the iPad Air. I have an iPad 2 and it does not happen at all. The Apple store checked it out. One rep said to me this is unusual and had a tech check it out and they said this is normal. If the iPad is suppose to be user friendly, why this extra step to get to the lock screen? Are other owners of the iPad Air having the same problem? If so, what have you done to correct it?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Since my printer only prints in black, how do I get all the print on the screen to change to black?

My color printer prints ONLY in BLACK. The screen I want to print is printed on the monitor in blue and red. How can I make all the print black on the monitor so it will print black on my printer?

Explore the settings for you printer to see if there is a setting for "gray-scale" to un-check so that you do not get the gray when printing the blue or red text that shows on your monitor. You can click Print, then click Properties on the Print screen to see if you can change it; while there, look to see if there is an option to use the black cartridge only if that is what you want to do. On my printer, making the change there was only temporary and I had to do it through the software that came with my HP printer to make it permanent. Your printer manual would be a place to look also.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

Thanks Lucas,
I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info. My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone. Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple. I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

Hi,
First plaese unplug any external device (except the mouse and keyboard), then hold on the power button, perform a cold reboot, what is the result?
If doesn't work, please press F8 (or other button, depend on your PC model) boot your compute into recovery console.
You can restore your system to a previous point or perform a startup repair, please refer to the following link:
What to do if Windows won't start correctly
http://windows.microsoft.com/en-in/windows-vista/what-to-do-if-windows-wont-start-correctly
Yolanda Zhu
TechNet Community Support

My 5 month old iphone 5s just shut itself off 45 minutes ago, and I have tried charging it and the only thing that appears on the screen is a white screen with the black apple. How is this repaired?

About 45 minutes ago my iphone 5S just shut off on its own. I have tried charging it only to have the white screen with the black apple showing. How can this be repaired?

Keep it plugged in and do a reboot by holding both the power and home buttons until the apple logo appears, ignoring he red slider if that appears.

I have set the presence to screen only but the checkbox still prints adobe livecycle

I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

Odd 'shadow' type artefact on the screen. ONly in the 'black' or 'key'

Similar Messages

Maybe you are looking for