Odd storage space behavior for flash drive in USB port of E4200

Using Mac OS 10.6.8 on a MacPro 2x2.8 ghz quad core intel xeon with 20GB ram
I have a Linksys E4200 with Linksys Smart WiFi
I have an unknown brand USB Flash drive in the E4200 router. The USB Storage status tab reads I have used 68MB of 1.87GB of storage space. The Mac Finder window reads the drive as having 2.8MB available. I have refreshed, disconnected and reconnected many times.
I tried to copy a 49.5GB TIF file into the drive through the Finder and I get this error:
Then I tried to copy a 2.8MB PDF file and got the same error.
Keep in mind I was just able to copy this over yesterday--and delete it. Now I cannot copy it over. This same incident of the router changing it's mind happened with multiple folders and various files. First it doesn't take it. Then it takes it. Then it doesn't take it.
Here's a weird error I got when trying to copy a game emulator:
When I refresh in Linksys Smart Wifi, I am still told there is plenty of space.
Now I deleted everything in the drive and successfully copied over a bunch of tiny 233KB files. Smart Wifi shows over 1GB of space remaining.
Then I tried to copy a 160MB folder of small data files. Got the same not enough space error. So I tried a 7.5MB file. Same space error.
Does anyone have any clue why this is happening? I tried to searach the forum and did not find anything similar.

If that's the storage device then that's ok. From what you have posted this is just a 2GB usb flash stick. So if you cannot copy more files to it, it could either be the file format  you are transferring is not supported or the disc space is not enough. Connect the flash drive directly to your computer and test it that way. If you still cannot copy any files then I suggest that you reformat the usb flash stick.

Similar Messages

  • Recovery media program not recognizing flash drive in USB port

    I have a new NB505-N500BL netbook. I am trying to create a backup using the Toshiba Recovery Media Center.
    However, it doesn't seem to recognize that I have an 8GB flash drive installed.
    Everytime I hit "create," I get the message to insert a 7.7GB flash drive. When I hit "OK" I get a msg to insert a flash drive greater than 7.7GB.
    The 8GB flash drive is installed. I've tried it in all 3 USB ports. I've tried inserting it before turning ont the computer and afterwards.
    I bought the flash drive directly from Toshiba so it should be good. I also assume a new 8GB flash drive meets the requirements of 7.7GB.
    Any suggestions?
    Thanks!
    Emma

    Hi Emma,
    Contrary to what the size it's asking for, it's possible that the drive is just slightly too small. Even though the data may fit on the drive you have, the way TRMC calculates its free space may be slightly off. If you wish, you can try building this by hand and see if it fits. As follows:
    1. First format the USB drive and make it active.
    2. Now reboot the machine hitting the <F8> key until you are presented with a menu.
    3. The first option should be "Repair...", then hit <ENTER>
    4. You will be present with two login screens and eventually arrive at a repair menu.
    5. First open up a command box and leave it open.
    6. Now go back to the menu and launch the "TOSHIBA Recovery Wizard".
    7. It will eventually get to a warning screen. Don't go pass this warning screen.
    8. Once it gets to the warning screen, toggle back to the command box.
    9. All you need to do is copy the contents from (I believe it's drive Q:\" to you root of your USB drive.
    "robocopy Q: (USB Drive letter) /E /R:1 /W:2
    10. Once everythings copied (assuming it fits), <Cancel> and the warning screen and then try rebooting from your USB drive.
    Rick...

  • How to download data to flash drive in USB port

    this seems like it would be a simple basic thing to do....

    How is the flash drive formatted? What disk format is required by your synthesizer? I'm thinking you probably need to use a PC format - NTFS or FAT. OS X cannot write to an NTFS formatted drive, but it can write to one formatted FAT (MSDOS.) If you can use the latter, then you need to format the flash drive. This is not straight-forward on the Mac as it would be on a PC.
    Put the flash drive in a USB port on your Mac and open Disk Utility in your Utilities folder.
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list.Click on the Partition tab in the Disk Utility main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS. Click on the Apply button and wait until the process has completed.
    4. Check the status and be sure it shows Format type: as MSDOS. If not, then repeat Steps 2 and 3.
    Try the flash drive now.

  • Using a flash drive stick USB with parallel on imac OS 10.4.10

    When I plug in a scandisk flash drive stick - usb port (cruzer micro) 4gig. OSX recognizes it, windows XP on parallel 3 does too, but when you click on do you want to bring it in - nothing happens. How do I get windows to accept the flash drive (stick) so I can see and use it?

    Since Parallels is not an Apple product, you're more likely to receive an accurate response by posting your question on the Parallels forums:
    http://forums.parallels.com

  • HT201250 Since time machine backed up my computer does that mean I can delete files so I can increase storage space on my hard drive?

    Since time machine backed up my computer does that mean I can delete files so I can increase storage space on my hard drive?

    NO!
    Time Machine is not an Archival Backup. It will keep files for a while, but if it needs the space, it will delete files that no longer exist on the hard drive.
    Get a couple external drives and move the files to both of them.

  • Short dump - No more storage space available for extending an internal tabl

    Hi All,
    I have requirement in which my program generates a text file on my presentation server. Here my problem is, this requirement can not be executed in back ground, it should be done in foreground only. When I execute in foreground, if the data records comes to some 38 lacks then I am getting a short dump saying 'No more storage space available for extending an internal table'.
    And in dump analysis under WHAT HAPPENED section it is giving as
    ' What happened?                                                                                |
    |    You attempted to extend an internal table, but the required space was                         |
    |    not available.
    Please suggest me, what I have to do in this case?
    Thanks in advance.
    Thanks,
    Sudha Mettu

    Hi SuDash,
    Allocation of the memory spaces will be done by BASIS people.
    you can contact them..
    Regards!

  • Short dump -No more storage space available for extending an internal table

    Hi All,
    While running one program I get the short dump saying
    "No more storage space available for extending an internal table "IT_862".
    Error Analysis given in the dump log :
    The internal table "IT_862" could not be enlarged further.
    To extend the internal table, 14656 bytes of storage space was
    needed, but none was available. At this point, the table "IT_862" has
    8528862 entries.
    Source Code Extract :
    003360     loop at t_line.
    003370       clear t_output.
    003380
    003390   *   Increment Line counter
    003400       add 1 to l_line_cnt.
    003410
    003420       t_output-object = t_stxh-tdobject.
    003430       t_output-id     = t_stxh-tdid.
    003440       t_output-spras  = t_stxh-tdspras.
    003450       t_output-name   = t_stxh-tdname.
    003460       t_output-line   = l_line_cnt.
    003470       t_output-format = t_line-tdformat.
    003480       t_output-text   = t_line-tdline.
         *>       append toutput.   " ERROR POINT*
    Can you please suggest what can be the possible solution for the above error.
    Thanks in advance.
    Sanjeet

    Hi
    Check out this thread:
    Re: No storage space available for extending the internal table
    Make sure you are not having an infinite loop.
    Hope this helps
    Regards,
    Jayanthi.K

  • No storage space available for extending an internal table.

    Hi All,
    I am using Function Module :  VC_I_GET_CONFIGURATION in FI related Sales Order Report to get
    configuration data for fields Model/Engine and Line no.
    when the program executed in Production environment, It is giving Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED.
    ShrtText : No storage space available for extending an internal table.  
    The termination occurred in the ABAP program "SAPLIBINF" in "SELECT_INSTANCES_01" . its all happening
    in the above FM.
    Is there any possibility to get configuration data (Model/Engine and Line no)  with out using FM.
    please advise me on how you would like to proceed related to this issue.
    Thanks & Regards
    Satish Reddy

    Hi Satish,
    Please go through the below links and see if you can use this to address your issue,
    http://wiki.sdn.sap.com/wiki/display/ABAP/ReplacementofVC_I_GET_CONFIGURATIONforperfomance+tunning
    VC_I_GET_CONFIGURATION and paging memory
    Regards,
    Chen
    Edited by: Chen K V on May 26, 2011 2:34 PM

  • Error-No more storage space available for extending an internal table.

    Hi Experts,
                    i am facing problem in a program . its showing runtime error.
    Short text
        No more storage space available for extending an internal table.
    its showing error at   
    IF sy-subrc NE 0.
            REFRESH p_wip_tab.
          ELSE.
            i_wip_tab-pspnr = i_internal_and_external-pspnr_prps.
            LOOP AT p_wip_tab.
              MOVE-CORRESPONDING p_wip_tab TO i_wip_tab.
    ==> APPEND i_wip_tab.
            ENDLOOP.
          ENDIF.
    DATA: l_billable_tab LIKE p_billable_tab OCCURS 0 WITH HEADER LINE,
          p_wip_tab      LIKE zpswip OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF i_wip_tab OCCURS 0,
            pspnr              LIKE prps-pspnr.
            INCLUDE STRUCTURE zpswip.
    DATA:   pernr_name         LIKE pa0002-vorna,
          END OF i_wip_tab.
    How i can resolve this problem if anybody knows it then please reply me as soon as possible.
    Thanks

    Hello.
    Probably you fill the internal table with too much data and it cannot hold that much.
    You can either redesign the program so that it processes the data in batches of, say 100000 records, or contact your BASIS team and ask for their help. They could possible assign more memory to the running applications.
    Reward if helpful.
    Regards,
    George

  • TSV_TNEW_PAGE_ALLOC_FAILED -  No more storage space available for extending

    Hi
    Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
    Pls check my code and modify it so that i can load the data of 5,000,00 records
    TYPES: BEGIN OF tys_TG_1,
                         /BIC/ZIUTILICH           TYPE /BIC/OIZIUTILICH,
                       /BIC/ZIRGRCH           TYPE  /BIC/OIZIRGRCH,
                       /BIC/ZPRODUCT           TYPE /BIC/OIZPRODUCT,
    END   OF tys_TG_1.
    TYPES:  tyt_TG_1        TYPE STANDARD TABLE OF tys_TG_1
                                                     WITH NON-UNIQUE DEFAULT KEY.
    data: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
    DATA : ITAB1 TYPE STANDARD TABLE OF  /BIC/AZDSO_HYD00.
    DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
    loop at RESULT_PACKAGE into e_s_result.
         Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT                                               FROM       /BIC/AZDSO_HYD00 INTO
                                    (e_s_result-/BIC/ZIUTILICH,
                                    e_s_result-/BIC/ZIRGRCH,
                                     e_s_result-/BIC/ZPRODUCT)
                                 WHERE
                                 COMP_CODE = e_s_result-COMP_CODE AND
                                 PROFIT_CTR = e_s_result-PROFIT_CTR .
              append e_s_result to e_t_result.
         endselect.
             clear e_s_result.
    ENDLOOP.
    refresh RESULT_PACKAGE.
    move e_t_result[] to RESULT_PACKAGE[].
    So im getting TSV_TNEW_PAGE_ALLOC_FAILED -  No more storage space available for extending an internal table..
    I think there is a problem in the code. pls look it and modify it.
    Regards
    kumar

    Hello Kumar,
    The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
    As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
    You can easily use
    Select
    /BIC/ZIUTILICH /BIC/ZIRGRCH
    /BIC/ZPRODUCT FROM
    /BIC/AZDSO_HYD00
    INTO TABLE e_t_result
    FOR ALL ENTRIES in RESULT_PACKAGE
    COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
    PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
    That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
    You can add the following:
    Select
    /BIC/ZIUTILICH /BIC/ZIRGRCH
    /BIC/ZPRODUCT FROM
    /BIC/AZDSO_HYD00
    INTO TABLE e_t_result
    PACKAGE SIZE xxxx
    FOR ALL ENTRIES in RESULT_PACKAGE
    COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
    PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
    PROCESS your data here
    ENDSELECT.
    You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
    Hope that helps,
    Michael

  • I have been tying to buy more storage space and for no reason I can't get it

    I have been tying to buy more storage space and for no reason I can't get it

    I hae been trying going through all the steps to do so, but at the end, I can't get the purchase.

  • Getting Dump "No more storage space available for extending an internal table" ??

    Hi All,
    In Web Ui while i was click save, it taking too much of time for saving at all lost it throwing dump such as "No more storage space available for extending an internal table". Recently Basis side did some activities for storing day to day transaction in back up server, after this activities i am getting this problem. i opening that Bsp component it throwing some information message such as component not integrated, i didn't see that message properly but i clicked continue button. After that basis activity only i got that information message once.
    i dont know what is the issue. Can anyone give solution for this issue
    Thanks,
    Anbu

    Ask your basis guys to clean up the system memory. This is happening because no memory is left.
    ~Kavindra

  • Dump --  No more storage space available for extending an internal table

    In Our system we are getting this dump
    No more storage space available for extending an internal table
    and because of it no user is able to login into the system.
    We have Some classes in the system and we have defined shared memories to all classes according to regions.
    So for a particular class means users of a region are not able to logon to systems and we are getting these dumps in the system.
    So please suggest first how to clear the shared memory & how to conclude what activity in system made the shared memory full.
    Regards,
    Shivam Mittal

    My OS is HP-UNIX..
    And we do not access on OS level,So please suggest the way to clear it from SAP level.
    In dump it is also mentioned:
    The internal table "\AREA=<Name>\INSTANCE=$DEFAULT_INSTANCE$\VER
    SID=2\OBJ={O:1.2*\CLASS=<CLASS>\DATA=GT_BUFFER[1]-DATA" could
      not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "\AREA=<Name>\INST=$DEFAULT_INSTANCE$\CLNT=100"
    Row width: 156
    Number of rows: 0
    Allocated rows: 63
    Newly requested rows: 1216 (in 19 blocks)
    Please also suggest what is the internel table name that is causing the issue.
    Regards,
    Shivam Mittal

  • BW..No more storage space available for extending an internal Table

    Hi;
    In function module - RSAR_TRFC_DATA_RECEIVED
    During Data loading from ERP to BW client am getting an error  in SM58 in ERP as ""No more storage space available for extending an internal Table "".
    There is a dump in BW system   TSV_TNEW_PAGE_ALLOC_FAILED
    "".I checked all the parameters for roll area,paging , etc..everything is fine. Also tried with  packet size smaller ..still i am getting this error ..
    Thanks & regards
    seethy

    hi thanks for the response....
    Memory parameters are fine
         em/initial_size_MB               2048     EM/TOTAL_SIZE_MB               21679     em/global_area_MB               256     Ztta/roll_area                       6500000     
         ztta/roll_first               1     
         ztta/roll_extension                  2000000000          
         rdisp/ROLL_MAXFS               32768     
         rdisp/PG_MAXFS               32768     
         rdisp/ROLL_SHM               16384     
         rdisp/PG_SHM               16384
         abap/heap_area_dia          2000000000     
         abap/heap_area_nondia      2000000000     
         abap/heap_area_total          4000000000
    i have checked with Less data selection. still error occurs     
    regards
    seethy

  • HT204053 I just purchased more storage space(10gb) for   iPAD, but when I attempted to download an app An error message appeared prompting me to buy more storage. according to my ICloud  I have 15gb available. Does anyone have any suggestions

    I purchased more storage space(10gb)for my IPAD,but when I attempted to download an app an error message prompted me to purchase more storage.According to my ICloud I have 15gbavailable Any suggestions Help!!!

    If you are trying to download an app and get an error about not enough memory, it's talking about memory on your iPad, not in iCloud.  I don't know what you mean by purchasing more storage space for your iPad, you can't add more memory to a device.  You may have bought more memory in iCloud, but that's not going to fix your current problem.  You need to delete songs or video, or some other large files from your iPad to make room for a new download.

Maybe you are looking for