Odd symbol appeared on phone 3110c yesterday
I have an odd symbol that appeared on my phone yesterday that I think a few other people on these boards have experienced but no-one knows what it is. I took my phone into the Orange shop and they didn't know what it was either! It's not in the instruction manual.
It looks a bit like a printer or a fax machine, a grey square on top of a grey rectangle and sits in the indicators area of the screen next to the battery charge indicator.
It disappears when I navigate away from the home screen. Its not something associated with my voicemail, or missed calls, or messages, or any of the settings I've changed. I've tried resetting the phone and it still refuses to budge. Any ideas anyone?
thanks, Sarah
Hey @woaksie
Actually you need to press the Left Soft Key while you're on call settings. This will then display the sub-items of Call Settings and the first option should be Call Divert.
So here it is in a correct manner: Use the up Up, Down, Left, Right directional keys to scroll around.
Open Menu by pressing the left soft key.
Scroll to the Settings menu item. Press the Left soft Key.
Scroll to the item called Call Settings. Press the Left Soft Key.
Locate Call Divert (Usually the first option). Press the Left Soft Key.
Check for a list item called Cancel All Diverts (usually the last in the list). Press the left soft key to cancel the active diverts in place.
BTW are you able to receive calls on your number? Diverts should forward calls to another number hence you being unable to receive them. However, sometimes the carriers also set-up the Automatic Diverts on all the numbers. Such as to forward the call to Voice Mailbox in case the number is not reachable or switched off. So if the Cancel all Diverts option fails to remove that icon, you will be needed to talk to Orange.
Similar Messages
-
Odd symbol appeared on 1208 next to signal strengt...
^
---- |
it looks like an bent arrow that starts on the left and then bends up. What does it mean and do I have to do anything about it?
Thanks.Hey @woaksie
Actually you need to press the Left Soft Key while you're on call settings. This will then display the sub-items of Call Settings and the first option should be Call Divert.
So here it is in a correct manner: Use the up Up, Down, Left, Right directional keys to scroll around.
Open Menu by pressing the left soft key.
Scroll to the Settings menu item. Press the Left soft Key.
Scroll to the item called Call Settings. Press the Left Soft Key.
Locate Call Divert (Usually the first option). Press the Left Soft Key.
Check for a list item called Cancel All Diverts (usually the last in the list). Press the left soft key to cancel the active diverts in place.
BTW are you able to receive calls on your number? Diverts should forward calls to another number hence you being unable to receive them. However, sometimes the carriers also set-up the Automatic Diverts on all the numbers. Such as to forward the call to Voice Mailbox in case the number is not reachable or switched off. So if the Cancel all Diverts option fails to remove that icon, you will be needed to talk to Orange. -
I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.
mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
Not sure where these hard disk folders are located that you are referring to? Finder, Finder tool bar, Finder side bar, Desktop, Dock?
More then likely they are an alias that not longer point to the orginals, thus the question mark.
I would reboot. Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove. -
My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.
Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
Good luck. -
How do I delete photos and photo albums from my iPhone 4? The instructions given do not work. No "delete" symbol appears next to the album name when I press "Edit," and no trash can icon for me to click appears below most of the individual photos in the albums the computer just loaded on my new iPhone 4. When I synced the new phone the computer added these photo albums without permission from me. They are now taking up about 3 GB of memory on my phone. I would like very much to get rid of these photos from the phone. How do I do this?
To delete photos from your device
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply. -
Strange "pie chart" symbol appearing - Mail must be force quitted
Just yesterday randomly half way through the day, a strange 'pie chart' symbol appeared next to my Inbox, and though I can receive mail and send mail, Mail.app (after 1 min of being open) makes my CPU skyrocket to 100%. I cannot quit Mail, and the only way I can force quit is via Activity Monitor. The usual altcommandesc combo is not bringing up Force Quit. So 2 issues:
1. What's up with Mail? I'm using POP via Gmail as my main server.
2. How do you get force quit to show up?/Ditto
Sometimes my mail will send, but the process will take anywhere between 5 and 15 minutes to do so. More often than not, though, it just disappears into a black hole. Plus, this just started happening two days ago. All was well before then. -
My ipod touch showing that it is. Charging the syncing symbol appears next to the device in itunes but i cant open or see the content of my device since it goes on sycing....btw i hav latest itunes
michaelfromstockton on tees wrote:
I've found an easier way, just go to settings>general>usage>music. Then swipe it and press delete, i think this deletes the database described above, then re-sync, this worked for me anyway. Good luck, you need it with Apple software.
I don't have a large library of music on my iPhone 4s since I've only had it since Oct 2012, but since the update to iTunes 11 in early December, my album artwork has been all messed up. Everytime I would try to add new music, it would assign the wrong album artwork to anything new coming in. And in addition to that, it would also mess up album artwork of music already on my phone. Everything looked correct in iTunes, but on my phone, not so much. After trying to unsynch, then synching again, my frustration level was at an all-time high. This problem seems to be everywhere online, but no concrete solution for everyone.
I finally came across your simple solution (at least for me because of my small inventory of music) of just deleting all the music through the settings, and then re-synching to add back my music. Now all of the album artwork is correct again. I'm almost afraid to add new music for fear the artwork will get mixed up all over again! I still think my issue is somehow connected to the iTunes 11 update because up until then I had no issues whatsoever. Anyway, thanks for an easy solution that worked for me. -
Bluetooth symbol appears every 20 sec
The day before yesterday I bought a new Lenovo IdeaPad U330p without operating system. I already installed Windows 7 Ultimate 64 bit, Microsoft Office 2013 and some drivers.
Yesterday everything worked properly, but since today there's always a bluetooth symbol appearing (approximately) every 20 sec) on the right side of the screen. It disappears immediately.
It is not possible to click on the symbol, it still disappears.
I consider this very annoying and would like to solve this problem. Does somebody have any tipps?
P.S. I already tried to uninstall the Bluetooth-driver, but it didn't work. After restart they are reinstalled automatically.
Solved!
Go to Solution.I already tried this before, but it didn't work.
But now I found out something new and have to update my problem.
After a little bit of trying and installing and uninstalling of some programs and drivers and rebooting all the time I found out, that the thing that causes BOTH of my problems (http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/No-level-shown-when-changing-brightness/m-p... is the Lenovo Energy Cut.
I have no idea how it came, and I can't remember that I installed this program, but i uninstalled it now and the problem with the bluetooth does now no longer exist.
After un- and reinstalling of all the other drivers, you told me, I have a new problem. I now have no change shown at all (I can change the volume and the brightness with the keyboard, but I have no level shown at all, neither at the volume change, nor at the brightness change)..
So I am not satisfied with the solution, not to use Energy Cut, because I want to see, on which level the brightness and volume is.
But I think the problem with the Bluetooth is solved, and I should just consider some solutions in the other thread, because it doesn't affect Bluetooth anymore. So this thread should be closed, shouldn't it? -
I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?
SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need." -
Odd Characters Appear in Published product - Captivate 4
We create PPTs then convert them to Captivate 4 projects, edit and enhance them, and publish. Most go somewhat well. Lately I've been getting odd symbols on SOME of the published slides"- lie the "A" above the word "Overview" in the image below (I circled it in red). The A is not in the image when previewed or I look at the slide's properties. On another presentation a small hockey stick like shape appears, and on another presentation there's like a swoosh.
Yvan, Is there a mail forum? I didn't see one. Not sure where to post this question.
I understand what you are saying. The emails have characters that the recipients can't read so they come up as boxes or ?. How do I fix the problem?
When you are saying that the recipient doesn't have the same encoding - does that mean the problem can't be fixed? I have emailed the same people from my kids PC and there are no problem. Same mail host, internet connection and stuff. The problem is with the mac. -
Sim card with x xmark symbol appear in xperia z1
Sim card with x xmark symbol appear in xperia z1
Hi Marieguia
Thanks for providing the information
last what can you do is, turn off your phone, press and hold the volume up button, you can feel few vibrations,later press the power button, untill you see sony on the scree, let go the buttons, you might find few options, which i guess you can go through, try clearing data with that mode..
try this link
http://hard-resets.com/sony-xperia-t-hard-reset/
let us know
Manjuboyz
NOTE:
Rate me(Kudos) If you are happy with my Resolution, Thanks -
i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?
luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status: -
How do you remove the iTunes symbol off u phone, I can't make any calls
How do I remove the iTunes symbol from my phone, I can't retrieve any apps
Connect in iTunes. iPhone will be detected in Recovery Mode. Restore.
-
Hi,
I had an update massage for a wile on my phone and yesterday I decided to do the update and so I downloaded the soft w. and started to install but in the middle of the process the phone got stocked and said to connect to iTunes and so i did it and again the process gets interrupted first saying "the software on Iphone needs to be restored to factory settings or update" and so i do it..then it comes the message the an error -39 and I can not do it and it says that I need to restore..and so I do it..but its a circle and it never ends..and I have no phone since yesterday.. all my contacts, my work..
Can any one help please?Hi
A little information will be of a great help, witch iPhone did you upgrade, memory , and version of software ( iOS 8.x.x )?
Try restarting you iPhone and make sure you have a god internet connection , get as close to your wifi router (1-3 meter / 2-9 feet ) as possible. Don't use restore to factory settings before you tried other options . And most imported du you have an iCloud backup.
//Sorenc -
I cant sync my iphone to my mac, the following message appears: this phone cannot be synced because this computer is not longer authorized for items bought in this phone! how can I solve this problem?
Mac iTunes menu > Store > Authorize This Computer....
Maybe you are looking for
-
How can I get just the text to resize, rather than the entire web page?
I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text r
-
I am about ready to throw this machine out the window!! I have installed Robohelp X5 and updated to 5.0.2. I also installed a VCS patch since RH doesn't like to play nice with PVCS. I can open projects from local drives just fine, but when I try to o
-
ExternalInterface is not working?
Hi all, I have an issue with ExternalInterface.call, it's working fine in IE but not in Chrome I don't know why? is there any solution? please let me know. Bellow you can find the code. Thanks in advance. AS Code: import flash.external.ExternalInterf
-
Unable to update nodes in JTree
Hi all, I have a JTree, which I have passed in a DefaultMutableTreeNode in the constructor. I have added 3 elements inside this "root". So the JTree looks like this : Root ->Element 1 ->Element 2 ->Element 3 However, when I want to actually delete th
-
Unwanted fills appearing on objects that have no fill
Hi, Something has changed from CS5 to CS6 and I can't figure out what is going on. This issue happens only when my co-worker and I share a file. We are both using the identical up to date macs with our own versions of CS6. If he sends me a file with