Oddities with configuration of VI server

Dear LV specialist,
my LV application is divided into a remote and a local part.
I now want to set values within a global VI (which is part of my local application) from my remote application and simultaneously do some event registration on this global VI from my local application.
Therefore I need to flexibly adjust the VI server's port address.
Within the attached zip-archive you'll find a small project that explains my problems.
I'd appreciate a quick and helpful response how to primarily adjust the VI server's port address.
Best regards,
Michael Theumert
Attachments:
TCP-Port-Dilemma_LV8-2-1.zip ‏41 KB

Cross posted on LAVA.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOA

Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
ipv6 dhcp database disk0://DHCPV6-DB
ipv6 dhcp pool VLAN206IPV6
prefix-delegation pool VLAN206IPV6-POOL
dns-server 2620:B700:0:1001::53
domain-name global.bio.com
ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
interface Vlan206
description *** IPv6 Subnet ***
ip address 10.2.104.2 255.255.255.0
ipv6 address 2620:B700:0:12C7::2/64
ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
ipv6 nd managed-config-flag
ipv6 dhcp server VLAN206IPV6
standby version 2
standby 0 ip 10.2.104.1
standby 0 preempt
standby 6 ipv6 2620:B700:0:12C7::1/64
standby 6 preempt
I'm getting a result from my debug as follows:
Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: dst FF02::1:2
Apr 10 16:28:03.861 PDT: type SOLICIT(1), xid 8277025
Apr 10 16:28:03.861 PDT: option ELAPSED-TIME(8), len 2
Apr 10 16:28:03.861 PDT: elapsed-time 101
Apr 10 16:28:03.861 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.861 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.861 PDT: option IA-NA(3), len 12
Apr 10 16:28:03.861 PDT: IAID 0x0FF01FAF, T1 0, T2 0
Apr 10 16:28:03.861 PDT: option UNKNOWN(39), len 32
Apr 10 16:28:03.861 PDT: option VENDOR-CLASS(16), len 14
Apr 10 16:28:03.861 PDT: option ORO(6), len 8
Apr 10 16:28:03.861 PDT: DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::21D:E6FF:FEE4:4400
Apr 10 16:28:03.861 PDT: dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: type ADVERTISE(2), xid 8277025
Apr 10 16:28:03.861 PDT: option SERVERID(2), len 10
Apr 10 16:28:03.865 PDT: 00030001001DE6E44400
Apr 10 16:28:03.865 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.865 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.865 PDT: option STATUS-CODE(13), len 15
Apr 10 16:28:03.865 PDT: status code NOADDRS-AVAIL(2)
Apr 10 16:28:03.865 PDT: status message: NOADDRS-AVAIL

Hello,
maybe hitting the following bug.
Pv6 Address Assignment Support for IPv6 DHCP Server
CSCse81385
Hope this helps

How to do configuration the Essbase server with shared services

We install Hyperion 11.1.2, we install Hyperion Essbase server and planning on UNIX box (64-bit) and FR Report, Essbase administration services and foundation services on windows 2008 (64-bit) server.
When I am doing the configuration on windows server it’s not asking anywhere Essbase server details.
How to do configuration with Essbase server and planning where these are on Unix box and foundation services are on windows server.
Help me !
Thanks
Dharm

I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
An error occured during the operation. Detailed Message is - reg.properties notconfigured.

Issue with osb + weblogic foreign server AQ configuration

Hi ,
I am trying out a scenario wherein, OSB publishes a message onto an Oracle AQ JMS Topic.
I have created the Foreign Server and have used the Local JNDIs of the connection factory and the destination within my OSB business service. But then, my business service fails to publish the message onto the AQ giving below exception in the server logs:
"<BEA-169807>There was an error while making the initial connection to the JMS resource named ALSB_JMS_SessionPool_-541341947 from within an EJB or a servlet. The server will attempt the connection again later. The error was oracle.jms.AQjmsException: Error creating the db_connection"
Below are the configurations that I have used for configuring the foreign server
Connection Factory - LocalCF | Local JNDI - LocalCF | Remote JNDI - XATopicConnectionFactory
Destination - ETASNIN | Local JNDI - ETASNIN | Remote JNDI - Topics/ETASNIN
The Business Service URL: jms://xxxxhost:7011/LocalCF/ETASNIN
**P.S:** I have tried out the same scenario of interfacing OSB with AQ JMS on a Windows box it works fine... But the above is the case on a UNIX box. Also, I am using PS3 of OSB with 10.3.4 of weblogic server.
Any Suggestions on this would really help and is much appreciated...
Thanks,
Manoj Nair

Hi Manoj,
how it was solved?

Ways to Configure Which UNIX Server a PC Client Application Communicates With

We have several different MS VC++ "fat client" applications that we want to run
on the same NT 4.0 PC.
Each application uses the Tuxedo 7.1 client to communicate with Tuxedo services
located on a UNIX server.
Each application needs to communicate with a different UNIX server (e.g., application
A1 needs Tuxedo
service T1 located on UNIX server S1, application A2 needs Tuxedo service T2 located
on UNIX server
S2). We'd like to load the Tuxedo 7.1 client software in such a way that each
individual application
controls which server it uses. One way to do that is through registry entries
specific to each application.
We are looking for some documentation or tips on other/better ways to configure
which server the PC
application communicates with. We are also looking for some documentation or
tips on how to best
configure an application that needs to subscribe to services from several different
servers (e.g.,
application A needs Tuxedo service T1 on server S1 and Tuxedo service T2 on server
S2). Thanks.

Matt,
This sounds quite unusual, and I am not sure why you want to do things this way.
Generally, I would expect that the services would be distributed on the server side over
different boxes as you describe, but the location would be transparent to a client app.
which would tpinit once, and Tuxedo would route the requests appropriately. Maybe that's
not how you want to do things because the apps are all logically independent? I'm not
sure about that though, since you describe needing services on different servers in
individual clients... Can you do the integration at the back end?
To do what you describe, however, you need to control the value of the WSNADDR
environment variable before you call tpinit() - it is the network address in this
variable that tells the client libraries which server to connect to. Simply set the
value (from a command line parameter, the registry, an ini file or wherever) with the
tuxputenv() API before you call tpinit()
In Tuxedo 7.1 and higher, it is also possible to connect to multiple different servers
simultaneousy by calling tpinit multiple times and having multiple contexts in the
client.
I hope that helps.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Matt wrote:
We have several different MS VC++ "fat client" applications that we want to run
on the same NT 4.0 PC.
Each application uses the Tuxedo 7.1 client to communicate with Tuxedo services
located on a UNIX server.
Each application needs to communicate with a different UNIX server (e.g., application
A1 needs Tuxedo
service T1 located on UNIX server S1, application A2 needs Tuxedo service T2 located
on UNIX server
S2). We'd like to load the Tuxedo 7.1 client software in such a way that each
individual application
controls which server it uses. One way to do that is through registry entries
specific to each application.
We are looking for some documentation or tips on other/better ways to configure
which server the PC
application communicates with. We are also looking for some documentation or
tips on how to best
configure an application that needs to subscribe to services from several different
servers (e.g.,
application A needs Tuxedo service T1 on server S1 and Tuxedo service T2 on server
S2). Thanks.

Issue with BAM Tools configuration in Biztalk server 2013

Hi all,
When I configure biztalk server 2013 I am facing the the below mentioned warning,
I have followed the below mentioned link but still problem continues
http://social.msdn.microsoft.com/Forums/en-US/8f4833e7-89b9-41bb-bd52-c58228491cbd/how-to-restart-biztalk-service?forum=biztalkgeneral

This is a known issue. You need to install CU1 before configuring BAM:
BizTalk Server 2013 CU1
Morten la Cour

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

Configuring the file server in KM and access,edit the documents from it

Hi friends,
My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
In KM what kind of file servers are there apart from the one it supports by default.
Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
To configure the file server is webDAV protocol required?
Points would be assigned for the helpful answer.
Thanks in advance.
Regards
Sireesha.

Dear Sireesha,
Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
Yes WebDAV protocol is required here.
You can create WebDav RM as well.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
The above links will help answer your queries.
Regards
Anjali

How to configure ODI for server and client correct?

Hi forum,
this is my first post and i hope you guys can help me out ...
i
am new to ODI and WLS and in my case ODI need to run on a server where a couple of clients can connect to, work on the same project with their own workspaces and accounts.
The database will be located on the same server.
As far as i understood, i need to install the the ODI Java EE type (not the standalone type) with a WLS ?!
iI already nstalled
JDK 6u41 (x64),
ODI 11g (11.1.1.6, generic),
Oracle DB 11g R2 enterprise and
WebLogic 11g (10.3.6, generic)
on the Server and now i am trying to connect to the ODI repositories from a client with an ODI standalone installation.
I am now trying to insert a Data Source into the physical agemt (not even sure if i need to do this in my case).
Following these instructions (http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/setup_topology.htm#CHDHJBAD) i get an ODI-26029 error.
Below are some configuration information of the software i installed.
h3. ODI
Installation:
Installationtype: full
Oracle home directory: Oracle_ODI1
Agent name: odi_agent
Agent port: 1987
Repositories/connection:
Master repository user = odim
Work repository user = odiw
Work repository name = WORKREP1
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
*odim and odiw have been created manually with grant options on connect and resource
Physical agent (with no datasource defined):
Name = OracleDIAgent
Host = localhost
Webapplicationcontext = oraclediagent
Port = 8001
Protocol = http
Physical data server:
Name = oracle_db_11gr2
User = odiw
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
Physical schema:
Schema (schema) = ODIW
Schema (work schema) = ODIW
Context = aMIS_dev
Logical schema = oracle_db_11gr2
Logiacal schema
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Context:
Name = aMIS_dev
Logical agent = OracleDIAgent
Physical agent = OracleDIAgent
Logical schema = oracle_db_11gr2
Physical schema = oracle_db_11gr2.ODIW
Logical schema:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Logical agent
Name = OracleDIAgent
Context = aMIS_dev
Physical Agent = OracleDIAgent
h3. Oracle DB 11g R2
Installation
Global database name = orcl.otera.local
SID = orcl
h3. WebLogic 11g:
+1. generate new basic WebLogic Server domain+
Domainname = ODI-DOMAIN
Admin name = weblogic
Admin server name = AdminServer
Listening port = 7001
Managed server name = odi_server1
Managed server port = 8001
+2. extend an existing WebLogic domain+
Choose extension source: ODI - Agent, ODI - Agent Libraries, Oracle JRF
Window: Configure JDBC compontent schema:
Driver = Oracle's Driver (Thin) for Instance connection; Versions: 9.0.1 and higher
Schema owner = odim
DBMS/Service = orcl
Hostname = localhost
Port = 1521
Client name = LocalODIMachine
Listening address of the accountmanager = localhost
Listening port of the accountmanager = 5556
Really hope you guys can help me quick.
Thanks in advance

Hi DecaXD,
thank you for quick response :)
on the client site i tried to establish the connection to the work repository with the following connection information:
Login information*:
Oracle Data Integrator Connection
Login name = odi_server
User = SUPERVISOR
Database connection (Master Repository):
User = odim
URL = jdbc:oracle:thin:@<server ip>:1521:orcl
A work repository could be found, but the connection failed! (?!)
" ODI-26130: Connection to the repository failed.
oracle.odi.core.config.NotWorkRepositorySchemaException: ODI-10147: Repository type mismatches.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Invalid SQL-Query for validating the connection (+translated from german into english+) "
my ODI configuration on the server site (loged in as: odiw):
topology tab*:
Physical architecture:
Technology:
Definition:
Dataserver name = oracle_db_11gr2
User = odiw
JDBC-URL = jdbc:oracle:thin:@10.168.178.131:1521:orcl
Datasource:
Agent = OracleDIAgent
JNDI-Name = [DataSourceName]
Agents:
Definition:
Name = OracleDIAgent
Host = <IP of the server>
Port = 8001
Webapplicationcontext = oraclediagent
Datasources:
Dataserver = oracle_db_11gr2
JNDI-Name = [DataSourceName]
Logical architecture:
Technology:
Defintion:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Agent:
Name = OracleDIAgent
Context = aMIS_dev
Physical agent = OracleDIAgent
when i test the connection of the data server (topology>physical architecture>technology>oracle>oracle_db_11gr2) with the OracleDIAgent i receive the
" ODI-26039: Connection failed.
oracle.odi.runtime.agent.invocation.InvocationException: javax.naming.NameNotFoundException: Unable to resolve '[DataSourceName]'. Resolved ''; remaining name '[DataSourceName]' "
since testing the connection on the server site failed in first place, i couldn't test the connection on the client site.

Error while configuring the application server for ESB on Jdeveloper

While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilay

i tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....

Oddities with configuration of VI server

Similar Messages

Maybe you are looking for