ODI 11.1.1.5 on different server from OBI 11.1.1.5

I am basically facing a problem with installing ODI 11.1.1.5 (Developer, Standalone and Java EE installations) on a different server from OBI 11.1.1.5. Basically, the thing that did cause this type of installation is that I cannot find a version of ODI to run a 64-bit machine like OBI 11.1.1.5. Hence, I installed the OBI on the 64 bit machine and shared the entire drive on which the home of the BI exist. The share process referenced all the folders contained inside the home with full permission given for read and change. This was being done to provide the bea home for the ODI Java EE installation which is required as a part of the installation process.
The problem is when I specify the middleware home location in the ODI installation with the given shared bea location an error appears saying: INST-07058: unexpected error occurred while validating Oracle home location.
I would be grateful to receive some advice on how to overcome this obstacle with regards to installting ODI on a 32-bit server where the weblogic AS is resided on a different machine running in 64-bit.
Help is very much appreciated...

EPM 11.1.2.1 is certified with 10.3.5.6+
To be honest if you are using 10.3.5.x then it worth patching the latest patch releases as many bugs have been addressed.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Problem with ODI 11.1.1.5 on different server from Web-logic

Basically a problem is being faced with installing ODI 11.1.1.5 (Developer, Standalone and Java EE installations) on a different server from OBI 11.1.1.5. Basically, the thing that did cause this type of installation is that I cannot find a version of ODI to run a 64-bit machine like OBI 11.1.1.5. Hence, I installed the OBI on the 64 bit machine and shared the entire drive on which the home of the BI exist. The share process referenced all the folders contained inside the home with full permission given for read and change. This was being done to provide the bea home for the ODI Java EE installation which is required as a part of the installation process.
The problem is when I specify the middleware home location in the ODI installation with the given shared bea location an error appears saying: INST-07058: unexpected error occurred while validating Oracle home location.
I would be grateful to receive some advice on how to overcome this obstacle with regards to installting ODI on a 32-bit server where the weblogic AS is resided on a different machine running in 64-bit.
Help is very much appreciated...

Thank you for answer, well in the Logueo.jspx i have this code
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" binding="#{backingBeanScope.backing_Logueo.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_Logueo.f1}">
<af:outputLabel value="outputLabel1"
binding="#{backingBeanScope.backing_Logueo.ol1}"
id="ol1"/>
</af:form>
</af:document>
</f:view>

</jsp:root>
this not is the problem, because is the project number 3 made on fedora and this don't function fine...... thank you for answer...!!!

Cloning DB on a different server from RMAN Tape backup

RDBMS version           : 11.2.0.2 on Solaris 10
Media Management Layer : Netbackup v7
I have done only backups to Tape. I have never done restore,recovery from Tape.
We have a production DB named NEHPROD running on server qualmh214. Every Monday morning an RMAN Full backup for NEHPROD is taken to Tape.
Production server : qualmh214        DB Name:NEHPROD
run
ALLOCATE CHANNEL c1 TYPE 'SBT_TAPE';
SEND 'NB_ORA_CLIENT=qualmh214,NB_ORA_POLICY=qualmh214_rman,NB_ORA_SERV=qualmh238,NB_ORA_SCHED=Daily';
backup database   FORMAT 'NEHPROD_%d_%U_%t.rbk' tag='NEHPROD_full';
}I need to create a Test DB in a different server (qualmh199) by restoring directly from NEHPROD's Full backup in tape .
From qualmh199, how can I connect to the Tape Media server ?
Even If I do connect to the Tape media server, how can i get access to tape backups of another DB? In the RMAN run block you can't specify a DB name. Right?
Even if I get access to another DB's backup , How can i specify which Date's Full backup I need to use to restore ?

From qualmh199, how can I connect to the Tape Media server ?You have to allocate channels to tape & need to mention NB parameters as example below.
in RMAN script
ALLOCATE CHANNEL CH1 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so64';
SEND 'NB_ORA_SERV=<server.com>, NB_ORA_CLIENT=<target.server>';
Even If I do connect to the Tape media server, how can i get access to tape backups of another DB? In the RMAN run block you can't specify a DB name. Right?If the libraries are installed and you able to perform, you can go for either duplicate database or simple RMAN restore. You can mention other DB names also
Ex: duplicate target database to 'test';
Even if I get access to another DB's backup , How can i specify which Date's Full backup I need to use to restore ?You can mention TAG's if you are using RMAN restore.

Run SSIS Package (SQL Database on Different Server) from Data Manager.

Hi- How to run a SSIS package from BPC Data Manager -This package connects to another SQL Server Database and creates a text file. This text file is the source to BPC custom tasks CONERTTASK and DUMPLOAD task to load to BPC.
Here is the flow of the complete package- Dataflow (Create the text file from a SQL Database)
CONVERT TASK (Convert the file to BPC Format)
DUMPLOAD TASK (Load the converted file to BPC)
Any pointer will be a great help.

Hello Pam,
When you run SSIS package with BPC DM it runs on the application server. You don't really have to run a package on a different server in order to get data from a remote database and dump it to a file. That task can be done in your SSIS package using various data sources/destinations. If that's what you are trying to do. The only thing is, your BPC admin user (the one you used to install BPC) has to have an appropriate privileges on a remote server.
Hope that helps.
Regards,
Akim

ODI and Essbase in different server to read the file error

Hi,
I have ODI and Essbase installed in different server.
I have created an interface to execute a calc script on top of an essbase cube. I kept the Caclscript.csc file in one folder in ODI server and provide the path
EXTRACTION_QUERY_FILE parameter is the path of the .csc file i placed in ODI server. it executed successfully to generate the extract file using the calc script in the specified path on Essbase server.
Now i want to read that file and load it to a relational table so map the network drive from ODI server to Essbase server where the file has been generated and provided the EXTRACT_DATA_FILE_IN_CALC_SCRIPT parameter as the Network drive path but ODI is unable to read the file.
any other option to read the file reside in essbase server and load it to relational table.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error occured while reading the data file produced by calculation script.
-KP

I would install an ODIAgent on the Essabse server and use this agent when running this particular operation

How to Upload Web App images to different server?

Hello,
is it possible to configure web app item submission so images are uploaded to a different server (not BC)?
Customers are uploading lots of images with their web app items and I'm really getting short on server storage. Buying extra space in BC servers is a bit expensive, especially when I need loads of it. Smart thing would be to AUTO resize images to take much less space in the server but this is not possible with BC as no back end is allowed (maybe this could good improvement in next releases? "Auto resizing images to the value indicated"). Some customers are uploading images of up to 9 MB size X 20. I could limit upload size (i guess), but thats a big hit to UX, they should then bother resizing their images on some software before uploading.
So far my solution is to simply download images from the server, resize them manually with PS and then upload them back again. Maybe someone knows better solution than photoshop to automate the resizing process? I actually can automate the process with PS but image names changes and this is another problem. So a program to auto resize loads of images and keep their original names?
Another solution could be manually storing images to another server and retyping the links in web app items, but its a bit too crazy
Thanks

Hi Ray,
Indeed, this is not possible as an 'out of the box' feature and looks like a long-shot if attempting to use a separate server for storage.

Migrating SSO to a different server

Hi,
We are using Oracle SSO on Oracle HTTP server.
AS requirement, we need to be moving to a different server with different IP, but out domain names will remain same.
Do we need to re-request the SSO credentials again? Or simply performing the steps (cleartext, and apobfuscate) again on the new server with the old details will get this going?
Please help.
Thanks in advance.

Yes, using dsmig is a supported method of migrating schema. However, dsmig requires local disk access to both the old instance and the new instace. Often times during migrations the new DS instance is on a new or different piece of hardware. In those cases to use dsmig you would have to either tar up the old instance, copy and un-tar it somewhere on the new system or, I suppose, you could set up a temporary NFS mount to the old system. I find either of these to be more work than is necessary. I almost always resort to a manual migration process as I know I am in control of everything being migrated. Sun does support the manual method as well and it is documented at:
http://docs.sun.com/app/docs/doc/820-2762/dsmanual?a=view
The section specifically on manually migrating schema is at:
http://docs.sun.com/app/docs/doc/820-2762/schemamanual?a=view

Is it possible to manually setup a Folder Redirection Policy on SBS 2008 for one user? Also are you able to set up folder redirection on a different server than you have SBS 2008 on?

I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server. I also would like to be able to test with one user. I read on the forums that it is best to use the wizards for SBS2008. The only problem
I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.

Hi,
I am sure you would get some help from :
http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
User setting can be found:
Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
Under User Accounts select accounts you want to have folders redirected.
Click OK
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Trigger Between two DB located on different Server

Hi Everyone,
According to my project requirement I need your help to create a trigger on one table employee of my 10g DB located on server 172.128.1.62, which will trigger for any Delete, Update and Insert and update the same on its duplicate table located on different server(172.128.1.201).
Eg:
Table EMPLOYEE (on 172.128.1.62) refer as A
SrNo        E_Name      Salary
1             Fizzz           5000
2             Albert        8000
3             John          6500
Table EMPLOYEE (on 172.128.1.201) refer as B
SrNo        E_Name      Salary
1             Fizzz           5000
2             Albert        8000
3             John          6500
Now If I update table A and change salary of John from 6500 to 7000 and delete Employee Fizzz from table A
Then I need a trigger to get fired and update the same in table B
After table A updated table B should look like:
Table EMPLOYEE (on 172.128.1.201) refer as B
SrNo        E_Name      Salary
1             Albert        8000
2             John          7000
I already scratch my head but did not find anything, Now this is became very critical requirement, Please somebody help me to achieve this task.
Thank you very much,
Fizzz. Edited by: Fizzz on Sep 22, 2011 4:36 PM

I would not consider doing it myself with triggers. It will practically be guaranteed that at some point in time your data in B will by out of sync with A.
There are several methods of doing replication. At least two technologies can be chosen from:
[url http://download.oracle.com/docs/cd/E11882_01/server.112/e10706/toc.htm]Advanced replication
[url http://download.oracle.com/docs/cd/E11882_01/server.112/e10705/toc.htm]Streams replication
Both can be setup in various ways ranging from simple two-database one-way replication that refreshes periodically (for example a fast refreshable materialized view) to multi-database multi-way replication of complete schemas.
We have had success with relatively simple materialized views for one-way replication of tables from one database to another. Read chapter 3 in the Advanced replication guide ;-)

How to pass database logon info to a Crystal Report in a subreport with different server name using VS C #

Post Author: fabu1971
CA Forum: .NET
I could pass the database logon in Reports with subreports but the reports with subreports with different server name I can not pass the logon information . Do you have any idea how I can do that to pass the database logon with different database or server name ?

Post Author: quafto
CA Forum: .NET
You can use the Subreports collection of the ReportDocument object to access all the subreports in your main report. These are returned as ReportDocument objects. Once you have your subreport as a ReportDocument you can loop through your Tables collection and set the ConnectionProperties to your appropriate Server/Database. For example here is some pseudo code: ConnectionInfo boConnectionInfo = new ConnectionInfo();boConnectionInfo.ServerName = "serverName";boConnectionInfo.DatabaseName = "databaseName";boConnectionInfo.UserID = "username";boConnectionInfo.Password = "yourpassword"; foreach(ReportDocument boSubreport in mainReport.Subreports){ foreach(Table boTable in boSubreport.Database.Tables) { TableLogOnInfo boTableLogOnInfo = boTable.LogOnInfo; boTableLogOnInfo.ConnectionInfo = boConnectionInfo; boTable.ApplyLogOnInfo(boTableLogOnInfo); boTable.Location = "newtablelocation"; }}

Error in report RSPOR_SETUP : "Different Server Times"

Hi,
I installed BI 7 and I have configured the communication between BI and EP.
When I execute report RSPOR_SETUP to verify the configuration, I am getting the following error message at step 12 (Maintain User Assignment in Portal):
2. Compare SAP BI and EP Server Time
Different Server Times could be a reason for retrieving always an invalid SAP Logon Ticket.
SAP BI Server Time: 09:08:16 2007/03/23
SAP EP Server Time: Fri Mar 23 09:08:16 EDT 2007
The time is identical, but it seems that the format I causing me problem.
How can I configure the date format in EP and BI ?
Best regards,

check the Note: 816761 and pasted it for you. May be this will help you.
There are new options to define how certain date formats (date, timestamp and time properties) will be formatted.
The following keys can be configured in:
EP6:
Configuration / Global Services / Property Metadata / Properties: Column "Additional Metadata"
NW04/NW04S:
Configuration / Global Services / Property Metadata / Properties: Select "Mode: Advanced". See column "Additional Metadata".
-Format
Use DateFormat defined patterns, DateFormat.SHORT, DateFormat.MEDIUM, DateFormat.LONG.
Documentation: http://java.sun.com/j2se/1.4.2/docs/api/java/text/DateFormat.html
as values: long/medium/short.
Example: format=long results in
Date type -> 17 January 2005
Timestamp -> 17 January 2005 16:09:23
Time -> 16:09:23
-customFormat
To set a customer pattern according to documentation: http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
If the pattern is not correct, the default date format will be used.
Example: customFormat=dd.MM.yyyy hh:mm:ss -> 17.01.2005 04:09:23
Regards.
PS: assign points is the way to say thanks

Xml file not loading from different server

Hi,
I have a simple flash banner that is pulling a number from an xml file on a different server. When it gets to the frame where the number should be it just says "transferring data from eckul.com" and will not actually pull in the number. Unfortunately I can't put the files on the same servers. Any help would be much appreciated, below are the links and the xml code I'm using followed by the action script. Cheers
http://www.sainters.net/newsletters/2010/flash_test_membership2.html
http://www.eckul.com/number.xml
<?xml version="1.0"?>
<inventors>
    <person>
        <name>892</name>
        </inventors>
function loadXML(loaded) {
if (loaded) {
_root.inventor = this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
_root.comments = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
name_txt.text = _root.inventor;
comment_txt.text = _root.comments;
} else {
trace("file not loaded!");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("http://www.eckul.com/number.xml");

so, in frame 1 of your fla before you execute that cross-domain load method, use:
System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
<!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
</cross-domain-policy>
and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
</cross-domain-policy>

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
    RFC_DESTINATION            =
*   FILE_MASK                  = ' '
*   LOCAL_DIRECTORY            = ' '
*   REMOTE_DIRECTORY           = ' '
*   OVERWRITE_MODE             = ' '
*   TEXT_MODE                  = ' '
*   TRANSMISSION_MONITOR       = 'X'
*   RECORDS_PER_TRANSFER       = 10
*   MONITOR_TITLE              =
*   MONITOR_TEXT1              =
*   MONITOR_TEXT2              =
*   PROGRESS_TEXT              =
* IMPORTING
*   LOCAL_DIRECTORY            =
*   REMOTE_DIRECTORY           =
*   LOCAL_SYSTEM_INFO          =
*   REMOTE_SYSTEM_INFO         =
* TABLES
*   FILE_LIST                  =
* EXCEPTIONS
*   CONNECTION_FAILED          = 1
*   INVALID_VERSION            = 2
*   INVALID_ARGUMENTS          = 3
*   GET_DIR_LIST_FAILED        = 4
*   FILE_TRANSFER_FAILED       = 5
*   STOPPED_BY_USER            = 6
*   OTHERS                     = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

Read Images from a different server

I need to read an image which is on a different server and place on my form. Can any one help me how this can be acomplished.
I have the url where all the images are residing. Though I hard code it in my form it gives me error that it cannot find the image.
Any ideas?

What is the code you are trying to use. If you tried READ_IMAGE_FILE then this doesn't work because it looks on the file system for images (see online help)
Frank

ODI 11.1.1.5 on different server from OBI 11.1.1.5

Similar Messages

Maybe you are looking for