Odi 11.1.1 client on 11.1.5 repository

hii
I want to upgrade my repository to odi 11.1.5 from 11.1.1.
1)Can models/interfaces from 11.1.1 be exported to odi11.1.5.?
2)Will odi 11.1.1 client ge connected to odi 11.1.5 repository ?
3)Will odi 11.1.5 client be connected to odi 11.1.1 repository?
Please help with the solution.

Hi
1)Can models/interfaces from 11.1.1 be exported to odi11.1.5.?
Ans: Yes, you can move models/interfaces from 11.1.1 to odi 11.1.5 using ODI import/export option
2)Will odi 11.1.1 client ge connected to odi 11.1.5 repository ?
Ans: No, we are not able to connect from odi 11.1.1 client to ODI 11.1.5 because it will return error " *version conflict* " while connecting repository
3)Will odi 11.1.5 client be connected to odi 11.1.1 repository?
Ans: Same as #2 answer
Regards,
Phanikanth

Similar Messages

How to configure ODI for server and client correct?

Hi forum,
this is my first post and i hope you guys can help me out ...
i
am new to ODI and WLS and in my case ODI need to run on a server where a couple of clients can connect to, work on the same project with their own workspaces and accounts.
The database will be located on the same server.
As far as i understood, i need to install the the ODI Java EE type (not the standalone type) with a WLS ?!
iI already nstalled
JDK 6u41 (x64),
ODI 11g (11.1.1.6, generic),
Oracle DB 11g R2 enterprise and
WebLogic 11g (10.3.6, generic)
on the Server and now i am trying to connect to the ODI repositories from a client with an ODI standalone installation.
I am now trying to insert a Data Source into the physical agemt (not even sure if i need to do this in my case).
Following these instructions (http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/setup_topology.htm#CHDHJBAD) i get an ODI-26029 error.
Below are some configuration information of the software i installed.
h3. ODI
Installation:
Installationtype: full
Oracle home directory: Oracle_ODI1
Agent name: odi_agent
Agent port: 1987
Repositories/connection:
Master repository user = odim
Work repository user = odiw
Work repository name = WORKREP1
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
*odim and odiw have been created manually with grant options on connect and resource
Physical agent (with no datasource defined):
Name = OracleDIAgent
Host = localhost
Webapplicationcontext = oraclediagent
Port = 8001
Protocol = http
Physical data server:
Name = oracle_db_11gr2
User = odiw
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
Physical schema:
Schema (schema) = ODIW
Schema (work schema) = ODIW
Context = aMIS_dev
Logical schema = oracle_db_11gr2
Logiacal schema
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Context:
Name = aMIS_dev
Logical agent = OracleDIAgent
Physical agent = OracleDIAgent
Logical schema = oracle_db_11gr2
Physical schema = oracle_db_11gr2.ODIW
Logical schema:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Logical agent
Name = OracleDIAgent
Context = aMIS_dev
Physical Agent = OracleDIAgent
h3. Oracle DB 11g R2
Installation
Global database name = orcl.otera.local
SID = orcl
h3. WebLogic 11g:
+1. generate new basic WebLogic Server domain+
Domainname = ODI-DOMAIN
Admin name = weblogic
Admin server name = AdminServer
Listening port = 7001
Managed server name = odi_server1
Managed server port = 8001
+2. extend an existing WebLogic domain+
Choose extension source: ODI - Agent, ODI - Agent Libraries, Oracle JRF
Window: Configure JDBC compontent schema:
Driver = Oracle's Driver (Thin) for Instance connection; Versions: 9.0.1 and higher
Schema owner = odim
DBMS/Service = orcl
Hostname = localhost
Port = 1521
Client name = LocalODIMachine
Listening address of the accountmanager = localhost
Listening port of the accountmanager = 5556
Really hope you guys can help me quick.
Thanks in advance

Hi DecaXD,
thank you for quick response :)
on the client site i tried to establish the connection to the work repository with the following connection information:
Login information*:
Oracle Data Integrator Connection
Login name = odi_server
User = SUPERVISOR
Database connection (Master Repository):
User = odim
URL = jdbc:oracle:thin:@<server ip>:1521:orcl
A work repository could be found, but the connection failed! (?!)
" ODI-26130: Connection to the repository failed.
oracle.odi.core.config.NotWorkRepositorySchemaException: ODI-10147: Repository type mismatches.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Invalid SQL-Query for validating the connection (+translated from german into english+) "
my ODI configuration on the server site (loged in as: odiw):
topology tab*:
Physical architecture:
Technology:
Definition:
Dataserver name = oracle_db_11gr2
User = odiw
JDBC-URL = jdbc:oracle:thin:@10.168.178.131:1521:orcl
Datasource:
Agent = OracleDIAgent
JNDI-Name = [DataSourceName]
Agents:
Definition:
Name = OracleDIAgent
Host = <IP of the server>
Port = 8001
Webapplicationcontext = oraclediagent
Datasources:
Dataserver = oracle_db_11gr2
JNDI-Name = [DataSourceName]
Logical architecture:
Technology:
Defintion:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Agent:
Name = OracleDIAgent
Context = aMIS_dev
Physical agent = OracleDIAgent
when i test the connection of the data server (topology>physical architecture>technology>oracle>oracle_db_11gr2) with the OracleDIAgent i receive the
" ODI-26039: Connection failed.
oracle.odi.runtime.agent.invocation.InvocationException: javax.naming.NameNotFoundException: Unable to resolve '[DataSourceName]'. Resolved ''; remaining name '[DataSourceName]' "
since testing the connection on the server site failed in first place, i couldn't test the connection on the client site.

Client export for ABAP programs, repository objects cross client objects

Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank you

You can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael

Java Client Program to explore CVS Repository

Hi Friends :
My module, use CVS as repository to which bunch of XMLs files gets committed by a particular process. Later these XMLs are collected and send to another location by an EOD process.
I need to write a java client, to explore CVS file folder structure to see what is in the CVS before EOD process starts. I do got one reference from NetBeans Stack - org-netbeans-lib-cvsclient.jar - but faces limitations on them.
Has any one here, has got any suggestion / alternate approach to make.
Regards
Abhilash

Imagine some friend replied to me - "Oh yes - I have applied this - XYZ jar in my project for same ops.. ' - this would have been booster for any one experimenting with ...That is what expected rather than de-route to Google Path .. My point is, that a Google search will probably lead you to articles, blogs, and posts, on this forum or on others, from people that are applying succesfully XYZ.jar for a similar purpose. This forum, with all due respect to its venerable members, and despite my obvious bias and sympathy for some of them, are no more authoritative than a few other technical places on the Internet.
And if no such existing resource andwser your needs, you'll be more welcome if you state that "you have read XYZ's doc, read this post (link), and this one (other link), and evaluated this other lib, and none of them seems to fulfills my requirements X, Y, and Z"
I have noticed your similar reply for the same query in another postAh, you mean in this topic which you resurrected (wink to the moderators :o): {message:id=9817389}?
Well note that it was not me who pushed this other poor soul to a search engine, so this is not just me getting old, wrinkled and bitter, merely a general consensus here that questions such as "Looking for a way to..." should demonstrate some effort on the part of the questioner before asking others. In the case of such an request where obviously several APIs are easily found, you could read the introduction chapter of the respective docs, to get an idea of the strength and weaknesses, or do a few more searches to find posts related to these APIs on programming forums.
but I feel - any query can give different dimensions of issuesI don't understand :o(
Idea of using CVS in my java module for storing files for processing came to my attention (...) remotely related to my requirement (...) It triggered me using CVS (...) would give me added advantagesIn other words, using CVS is not a requirement, it's a technical decision, after analyzing the requirements and the other factors that can drive the choice (licence cost, knowledge within the team, maintenability,...)?
Unless history, branching, and diffing, are requirements of your application, I seriously question using CVS as only a shared repository of data, but let's assume you have done this analysis and indeed come to the right conclusion.
So am patient enough to get an valuable guidance / lead on same subject - else I will continue with POC !!
Good Luck Oh you mean, with my age, wrinkles, and bitterness? Thanks ;)
I didn't mean to offend you, and wish you good luck getting help, I just pointed out that you will have more chance of getting help if you:
1) give more details about which "limitations" are hampering your work:
2) demonstrate more effort of evaluating alternative solutions
For example it is not clear to me if you're looking for a workaround with your current library, or if you 're looking for alternative libraries.
J.
Edited by: jduprez on Aug 24, 2011 10:18 PM

Why the SCCM client always corrupts the WMI repository?

Hi All,
I have a Configuration Manager 2012 R2 CU2 installation with hundred of client/servers.
From the initial deploy of the SCCM client, we seen that many machines had a Windows slow logon process.
We searched online for a fix and many people had this problem, suggesting to enable a registry key called
HKLM\Software\Microsoft\CCM\Ccmeval\NotifyOnly.
From that date, we fixed the slow logon process problem, but still have problems with operating system's updates installed with SCCM.
In the most cases, when SCCM install updates, it corrupt the WMI database and at the OS reboot, the updates are rolled back.
On the same machines, if we install updates from Windows Updates, we have no problems.
Also, with SCCM installation, we see a lot of "DCOM" or "PerfLib" errors.
Usually, the remote management of a client with SCCM doesn't works because the WMI repository is corrupted, so each time we need to do uninstall the SCCM client and do this:
1. Disable and stop the WMI service.
     sc config winmgmt start= disabled
     net stop winmgmt
2. Run the following commands.
     Winmgmt /salvagerepository %windir%\System32\wbem      (I noticed that you have run this command, but I would suggest that you try it again)
     Winmgmt /resetrepository %windir%\System32\wbem
4. Re-enable the WMI service and then reboot the server to see how it goes.
     sc config winmgmt start= auto
This is very frustrating.
Why the SCCM client create all these problems and how to fix this?
Thanks for your support.

I think that my case is not isolate.
There are a lot of posts like this:
http://www.windows-noob.com/forums/index.php?/topic/8989-wmi-corruption-sccm-2012-win7-sp1/
http://trevorsullivan.net/2012/11/21/configmgr-2012-ccmeval-exe-causing-client-corruption/
The strange thing is that the WMI corruptions only happens on machine where the SCCM client is installed, even if the machines is without any additional software (fresh windows installation).
In the same time, I need to fix a ProfSvc bug (KB2617858) because the PC become unusable.
Also, why it starts a WMI rebuild if I deploy the client with the "NotifyOnly" option (the registry key is fine)?
So, basically, on a fresh windows machine, as it joins to the domain:
1) the SCCM client install itselfs
2) it starts to install several windows updates
3) at the first restart, it try to rebuild the WMI and the ProfSvc bug appears
May be that the problem is not the SCCM client itself, but a windows update deployed via SCCM client?

Help : Need to dowload ODI 10.1.3.4 Client which is not available anymore

Hello to everyone.
My Client has an obsolete ODI10G repository and they need to make new developments on that repository before upgrading to a newer release.
They have lost their CDs and I am looking for a client zip file to install on my windows PC.
Is there anyone who can ftp or send me an url an ODI 10G. I deseperately need a 10.1.3.4 release ?
Thanks very much for your answer.

Hi Meapri,
Are you allowed to share this url ?
I would be interested to get a copy before it's no longer available.
Regards,
Jerome

Is there any Reporting tool in ODI?

Hi
My Senario is like , am transforing data from one data base to another (some amount of data). i want detailed information about how much data shoud be transfered and how much pending .some period of time like weekly report or daily reoprt i need .So this type of senarios i get small information through opreater and i need a report of this .is there any way for that.some one is told like web client .
web client in the sence what? i installed any for that
can any help .
Regards
Raghav

Hi MA,
you said that ' you have a standard report in ODI operator or web client'.
web client means what how can reach my requirements. using with Oprater report genaration is possible ? or how ?
See using with 'sqlunload' also we can get some information like we can write select query and genarate some information also . but this is not sufficient i think also.
and u said u want personal reoprt don't forget DB Repository. whats that mean.
u didn't explained about specific report BO, Cognos or jasper report tools.
Finaly if am using Jasper Reports what is the procedure can uexpalin the steps.
waiting for ur Repaly
Raghav

ODI Agent

Hi,
We are doing a POC on ODI.
I have installed ODI on my system.created required master and work repository.since it is a POC we dont need a shared environment.i am the only one working on my system.
I have some questions regarding AGENT.
1) Can i use the LOCAL AGENT in my case (no shared environement)
2) I would like to develop some interfaces and schedule them.can i schedule using LOCAL AGENT.
3) if 1 and 2 can be done....how can i start AGENT ...( i have installed ODI on windows)
4) actually i have also installed ODI on the server where our target DB is residing. how can i configure agent on that server with my client machine
your help will be really apprciated.
Thanks

Hi Cezar,
Thanks for the quick reply.
when i run the OS command...i am getting following results....
D:\OraHome_1\oracledi\bin>agentscheduler.bat -PORT=20910 -NAME=Schedular_Agent
A JDK is required to execute Web Services with OracleDI. You are currently using
a JRE.
OracleDI: Starting Scheduler Agent ...
Starting Oracle Data Integrator Agent...
Version : 10.1.3.5 - 10/11/2008
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at com.sunopsis.dwg.DwgSrv.<init>(DwgSrv.java)
at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
i am not sure whether scheduar agent is started or not....
2) what do i have to ebit in aentschedular.bat file...
Thanks

Set teradata work repository in ODI

dear all,
how to set teradata work repository in ODI?
regards
Naseer

I am trying to connect ODI designer from a client machine to an AIX server. It gives me the error:-
All the details that I have entered are to point to the AIX server. When I click on Test, it tells me that the connection is successful.
'Your master repository is up to date. Please upgrade your Repository'
Can someone please advise the on how to resolve this issue

Urgent! Important Regarding Running ODI Interfaces in Different Contexts!!

Hi all,
I have three different instances in which i have to run an ODI interface i.e. Development,Testing and Production .
I have craeted interfaces in development context.
When i am trying to run it in testing context, some of the interfaces erred out saying table or view does not exists(For $ table).
Actually it by default picking up the Development context and creating those $ table in dev instance only.
But when i reimport the LKM file to sql and attach the New imported LKM ,its running fine.
IS this Problem anyway related to ODI cache.IF yes, Can anyone tell how we can delete the ODI cache before runing interfaces in different Context.
Anyhelp or pointer regarding this will be highly appreciated.
Thanks and Regards,
Priyanka

Hi Guys
I got two interfaces: 1.load_ initial_ps_data & 2.load_hourly_ps_data in one package called LOAD_PS_DATA and one odiFileCopy that copies files from the dev environment to the shared target drive. The ODI infrastructure is as follows 1. Two Work repository running on Linux 2. Master repository running on linux. Then, I schedule'from linux box' the agent to run the scenario LOAD_PS_DATA hourly.
My problems are as follows
1. If the schedule agent is started from the ODI server, during its hourly execution it places "/" and end of the physical file path i.e the physical file path defined from the topology is
//nimbari.up.ac.za/ODI_GR/guestrecord.txt so when the schedule kicks off from the linux box where ODI server is intalled it adds extra '/' as follows //nimbari.up.ac.za/ODI_GR//guestrecord.txt and when I check from the operator it say file not found. I tried to replace the '/' with '\' from the path but still not working. To my suprise, when I start the schedule agent from the ODI client installed on my windows machine every thing works fine
2. I would like to be able to determine the context in which the package was run, during the run time, and then store that context in a variable
Your help will be higly appreciated
Thanks

ODI studio

Hi
Can anyone tell me how to open ODI studio from command line.
Thanks

Simply switch to the client location and open the odi.exe file
\oracledi\client\odi.exe

ODI Installation Architecture

Hi,
I am installing ODI and new to this tool. I have the following concerns regarding installing it.
1) Can I install ODI on a windows server, and create master repository and work repository on some database server?
In other words, the system wherever ODI tool goes, does it need a RDBMS database installed to hold Master and work repositories?
2) Does it require to install ODI Agent on same machine as ODI tool? which is best way to install AGENT? whether on same machine as ODI or on source or on target?
3)If I install ODI tool on a central server for eg: on windows 2003 server, how can I make it to work with multiple users at same time?
Do I need to install ODI tool on all developers systems?
I really appreciate any suggestions you could provide.
thanks,
T

Hi T,
Can I complete some information from previous reply?
1) Yes, ODI works with Relational Repositories and will need RDBMS to work but it connects like any other software (but by JDBC), so, of course, you don't need it at same machine of database.
2) An agent is always necessary to execute scheduled process and the ideal environment should have an agent by RDBMS accessed. The agent architecture has few considerations and need to be reviewed very carefully. A bad agent architecture can slow down your process in a very significant way.
3) The ODI architecture still is "Client-Server" then you must have an installation by user. However I know that is possible use it with Central Server, Virtual Machine and Remote Desktop BUT is necessary take a look at licensing.
I hope to have helped.
Cezar

Different Client Versions in OWB 9i and 10g

Hi,
Our client is using 9i OWB Client Software, and we are planning to use OWB10g Client Software on Windows Platform.
Will there be any compatability issues while moving from 9i OWB Client Software to 10g Client software.
And what are other parameters we need to consider, if possible please mention any documents links available.
Kindly let me know the pros/cons in this model .
Here my main question is will there be backward compatibility, i.e repository in 9i database need to connect by using the OWB 10g client?
With Regards,
Kranth...
Edited by: user8536050 on Jan 18, 2010 1:44 AM

Hi,
you cannot use different client versions on the same repository. If you want to use owb 10g, then you have to upgrade the repository to 10g. Then you can only use 10g clients, owb 9i clients cannot connect to that repository.
Regards,
Carsten.

Client Change options in SCC4 (SAP ECC 6.0)

Hi,
Our SAP Development system SCC4 settings are as mentioned below:
1.Changes and transports for client-specific objects : Automatic recording of changes
2.Cross-client object changes : Changes to repository and cross-client customizing allowed
3.Protection regarding client copy/comparison,: Protection level 1: No overwriting
Please suggest me , above mentioned settings are correct?
Development users are complainting that they are getting error "SAP System has status 'not modifiable'", Can anyone please help me how to solve this problem?
Thanks in advance!!!!
Regards
Veera

SE06
@ clieck on
system change option
@ go to EDIT
software Comonents Modifiable
Name sapces Modifiable
own name space Modifiable
but if it is PRD system then i will Not suggest for client Modifiable..
Best of Luck
Thanks
Mithun Das

Changing the report in one client , it is getting reflected in other client

Hello experts,
We are having one development system(EID) in which we are having two clients.One is development client(100) and one is sandbox client(710).We are having repository object like report.We are changing this report in EID 710 and it is getting reflected in EID 100.Now we want that once we changed this report in EID 710 it shld not get reflected in EID 100.We want to parallely work on this report.We tried with client change option "no changes to cross client customizing object" but it is not working.Can you plz suggest something.

Hi,
you can not do like this...
if you want to work parallely copy the same report to $temp program. then you can work parallery on both.
Regards,
Satya.

Odi 11.1.1 client on 11.1.5 repository

Similar Messages

Maybe you are looking for