ODI 11g Client

Hi All,
How can i install Oracle Data Integrator 11g 32 bit client? Please can you refer me any links or PDF's?
Thanks,
Jun
Edited by: 925687 on Jun 19, 2012 11:54 PM
Edited by: 925687 on Jun 19, 2012 11:55 PM

Hi,
Even we are having the same issue. After the ODI upgrade we are not able to test the agent or run any interface/scenario using the agent and it is hanging the whole application. I tried to look at the SR # 3-3543895337 but I guess, I dont have access to the SR.
Can you provide the resolution steps, so that we can work on it.
Thanks in advance,
Mallesh

Similar Messages

Where can I find ODI 11g client installation files ?

Hello All,
I am new to ODI... I have recently installed ODI 11.1.1.6.0 in OEL5 and want to know where to find the client installation software?
I tried to search in google and in oracle downloads but i couldn't find client installation files at all?
Thanks
Kanna

In the selection step, choose to install only ODI Studio and the local agent. This is the client software.

ODI 11g : JMS Queue XML Data Server creation

Hi Everybody,
I am facing a problem while i am trying to create a JMS Queue XML data server in ODI 11g. I have
the following details of the queue.
QueueManager=xxx;
TransportType=1;
HostName=ab.cde.fe.com;Port=77777;
Channel=CLIENT.TO.xxx1
destination name : SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01
user : xyz
password : 123
I have sussefully created an jms datasouce in weblogic name 'eis/jms/abc' and also I have successfully
retrived the xml message from queue in BPEL
(using a jms adapter where
JMS Provider : Third Party,
Jms Provider Jndi Name -eis/jms/abc,
Operation name : consume_message,
destinamtion name is queue:///SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01?targetClient=1).
But the new reqirement is to retive the xml data in ODI using "JMS Queue XML data server".I have tried
several ways(reading from internet) but failed to configure physical dataserver and reverse the xml message.
Also failed to understand properly the oracle post (http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/jms_xml.htm#CHDFCFBI).
Speically this portion "JNDI URL: <JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=<JMS_DESTINATION_NAME>.".
What will be the "JMS_RESOURCE" in my case.
How can I configure JMS Queue XML?
Please help!
Note : I don't have the XML message structure of the Queue(also DTD file). So , I have to reverse it.
Thanks & Regards,
Subhra
Message was edited by: SubhrajyotiKundu

Hi Everybody,
I am facing a problem while i am trying to create a JMS Queue XML data server in ODI 11g. I have
the following details of the queue.
QueueManager=xxx;
TransportType=1;
HostName=ab.cde.fe.com;Port=77777;
Channel=CLIENT.TO.xxx1
destination name : SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01
user : xyz
password : 123
I have sussefully created an jms datasouce in weblogic name 'eis/jms/abc' and also I have successfully
retrived the xml message from queue in BPEL
(using a jms adapter where
JMS Provider : Third Party,
Jms Provider Jndi Name -eis/jms/abc,
Operation name : consume_message,
destinamtion name is queue:///SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01?targetClient=1).
But the new reqirement is to retive the xml data in ODI using "JMS Queue XML data server".I have tried
several ways(reading from internet) but failed to configure physical dataserver and reverse the xml message.
Also failed to understand properly the oracle post (http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/jms_xml.htm#CHDFCFBI).
Speically this portion "JNDI URL: <JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=<JMS_DESTINATION_NAME>.".
What will be the "JMS_RESOURCE" in my case.
How can I configure JMS Queue XML?
Please help!
Note : I don't have the XML message structure of the Queue(also DTD file). So , I have to reverse it.
Thanks & Regards,
Subhra
Message was edited by: SubhrajyotiKundu

Install ODI 11g on Mac OS

Hi Guys!
Has anyone been successful installing the ODI 11g Studio on a Mac OS X (1.5)?
Metalink Note 1214428.1 says it's certified on Mac OS, but I can't run it.
Thanks!

Hi, I'm running ODI 11g on OS X (v 10.7).
In a nutshell, I installed ODI on a Linux server, then copied the ODI dir to my Mac.
I had to make a few changes:
1. The odi shell script had to be altered for the correct shell (first line). This file is located at odi/oracledi/client/odi/bin/odi
2. When this script is first launched, the J2SE had to be defined - I set it to /Library/Java/Home
3. ODI complained the above Java was not valid - to get around this, I added the line "SetSkipJ2SDKCheck true" to the config file located here: odi/oracledi/client/odi/bin/odi.conf
Lastly, I created an AppleScript and saved it as an application to launch ODI: do shell script "/Applications/odi/oracledi/client/odi/bin/odi > /dev/null 2>&1 &"
I've just started using today, but it seems to work well.
Hope this helps.
-Jim

Can we preview data after RKM in SAP in ODI 11g

can we able to right click and view data in models after reverse engineering in SAP in ODI 11g ??
Edited by: Drona on Mar 16, 2012 1:06 PM

No we cannot preview the data as SAP connection is made using Jco adapter.
We can only preview the data for data servers which are connected using jdbc.

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

Query Regarding Updation/Migration of ODI 10g To ODI 11g.

Hi All,
Currently I am using ODI 10g Version & Repositories ( Work & Master) have been installed on Oracle database version "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi"
We are thinking to migrate from ODI 10g to ODI 11g Version 11.1.1.5 & i have some queries which are metioned below.
1. Can we install ODI 11g Version 11.1.1.5 version with Repositories ( Work & Master) on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi" or do i need to upgrade my database version to 11G?.
2. If yes then, Can i upgrade or use exting Repositoires ( 10g one) for ODI 11g OR i have to create new Repositoires & move/migrate the objects of 10G repositories as mentioned in the Oracle installation doc.
3. Currently I am using OBIEE 10g for reposrting purpose & if i switch to ODI 11g , Do i need to use OBIEE 11g?
ODI gurus, I need your reponse ASAP & i have to share it on urgent basis.
Thanks
Edited by: neeraj_singh on May 15, 2013 9:58 PM

neeraj_singh wrote:
Hi All,
Currently I am using ODI 10g Version & Repositories ( Work & Master) have been installed on Oracle database version "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi"
We are thinking to migrate from ODI 10g to ODI 11g Version 11.1.1.5 & i have some queries which are metioned below.
1. Can we install ODI 11g Version 11.1.1.5 version with Repositories ( Work & Master) on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi" or do i need to upgrade my database version to 11G?.You can install ODI 11.1.1.5 but you have to upgrade your repositories using upgrade assistant
refer http://docs.oracle.com/cd/E23943_01/upgrade.1111/e12642/tasklist.htm#CIHGIDFG
2. If yes then, Can i upgrade or use exting Repositoires ( 10g one) for ODI 11g OR i have to create new Repositoires & move/migrate the objects of 10G repositories as mentioned in the Oracle installation doc.No need to create new repositories. You just upgrade them. But you need to takecare of certain things as you are a 10g user. Refer below link for the prerequisite
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e12642/prevusers.htm
3. Currently I am using OBIEE 10g for reposrting purpose & if i switch to ODI 11g , Do i need to use OBIEE 11g?Not clear about the question ?
>
ODI gurus, I need your reponse ASAP & i have to share it on urgent basis.
Thanks
Edited by: neeraj_singh on May 15, 2013 9:58 PM

Error when exporting to flat file in ODI 11g

This works ok in ODI 10g. I'm using IKM SQL to File Append on Windows Server 2008 R2
Getting the following error when exporting to a flat file in ODI 11g: ODI-40406: Bytes are too big for array
I've seen a couple of threads like this on the forum, but I've never seen an answer to the problem.

Problem is with the difference in behaviour for the IKM SQL to File Append KM between 10g and 11g.
Our 10g target file datastore had a mixture of fixed string and numeric columns. Mapping from the source to target was simple one to one column mapping. It generated the desired fixed format flat file; numerics were right adjusted with embedded decimal point and leading spaces. Each numeric column in the generated flat file occupied the exact space allocated to it in the layout. This gave the desired results, even though documentation for the 10g IKM states that all columns in the target must be string.
When we converted to 11g and tried to run this interface, it generated an error on the "numeric" columns because it was wrapping them in quotation marks. The result column was being treated as string, and it was larger than the defined target once it acquired those quotation marks.
In order to get 11g to work, I had to change all the numeric columns in the target data store to fixedstring 30. I then had to change the mapping for these numeric columns to convert them to right adjusted character strings (i.e. RIGHT(SPACE(30) + RTRIM(MyNumericColumn),30).
Now it works.

DATE Format Error in ODI-11g(11.1.1.3)

I am using ETL transformations in ODI-11g. There's a dominant issue regarding date formattings when I map an ODI variable (storing date) with a TGT column(datatype=date) mappings.
In all the src-tgt mappings I am formatting the date by using TO_DATE() functions. But still getting the error:
"ORA-01830: date format picture ends before converting entire input string".
A point to Note: The same ETL in other env are ruuning fine but in my new dev env it's giving this date error.
I had checked with the DBA folks and they confirmed they set equal DATE settings in all the env.
The ODI Variable is defined as an "Alphanumeric".
Tx Used: #BUSINESS_CURRENT_DT=TO_DATE('Date','YYYY-MM-DD')
Require some urgent advice...Please let me know

Hi,
W store name-value pair in the Control table from where we exctract our data. Both (param name and param value) are varchars.
Well this looks pretty strange in 11g! Here's what we found out...
If you are trying to retrieve a date variable by using TO_DATE() in the refresh query the ODI Java driver (JDK 1.6) would call java.sql.timestamp and gracefully attach HH:MI:SS.NS along with the date (YYYY-MM-DD HH:MI:SS.NS). My target ia a date always..!
So, when I do: TO_DATE('20101010','YYYY-MM-DD) in the refresh query ODI stores it as '2010-10-10 00:00:00.0'
For this the Load always fails as Oracle would not be able to interpret a timestamp by suing TO_DATE()
The Java driver does this damage. However, it may be wise to store as a timestamp rather as a date if in case u do a Data capture and want the exact time credentials.
Unfortunately not a req, as of now for us so I had to chop-off the timestamp..!
Let me know if you find any other details...
Thanks.!

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Oracle 11g client - Enterprise Manager Console?

Hello, we use 10g Enterprise Manager Console on our windows desktops as a gui tool. We installed the administrator version of 11g client, but I cannot find the Enterprise Manager Console. Does anyone know where this is?
Thanks!

This is what I understand from doc:
OEM Grid Control does not require an additional license if the follow this rule (from
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ)
>
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
>
and if you don't use any management packs http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/options.htm#CIHGFIAF
If you really want to be sure you need to confirm this with your sales representative.
Edited by: P. Forstmann on 2 sept. 2010 17:58
Edited by: P. Forstmann on 2 sept. 2010 18:03

Issue in creating Master repository from ODI 11g

Hi,
I am unable to create a Master repository connection using ODI 11g from local machine. I am using Oracle server of 11g version and have Master and a Work repositories in it. When I was trying to create a connection using ODI 11g it is throwing me the following error message,
Could not connect to repository
java.lang.IllegalStateException: Local Repository table is empty
     at oracle.odi.core.repository.support.RepositoryUtils$RepositoryInfoSource.loadRepositoryInfo(RepositoryUtils.java:182)
     at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo(RepositoryUtils.java:373)
     at oracle.odi.core.repository.Repository.getMasterRepository(Repository.java:72)
     at oracle.odi.core.OdiInstance.createMasterRepository(OdiInstance.java:501)
     at oracle.odi.core.OdiInstance.<init>(OdiInstance.java:553)
     at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:529)
     at oracle.odi.ui.docking.panes.OdiCnxFactory$1.run(OdiCnxFactory.java:205)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:619)
Suggest me to resolve this issue.
Regards, Sujeev

Try following links.
They are nice and Explanatory.
http://www.odigurus.com/2011/10/creating-master-repository-using-odi.html
http://odinetwork.blogspot.in/2011/03/creating-and-connecting-to-odi-master.html
http://odiexperts.com/creating-master-and-work-repository/
Thanks,
Mahesh

Windows 7 64-bit and need to install both 32bit and 64bit Oracle 11g client

Hello
First I am sorry for asking what is probably a common knowledge answer from most in the forum. I just cannot find a straight forward answer searching these forums or via google.
We have Windows 7 64-bit planned as our next desktop upgrade. We have several Oracle databases, and all of the client software in our environment is 32 bit.
I want to try and be ahead of the curve so I want to deploy the latest 64-bit 11g client instead of our current client (10g 32bit).
The simple question is this: Can we actually do that with our 32bit application suite or do I need to install the 32bit client for 32bit applications side-by-side with the 64bit 11g Oracle client for future 64-bit clients?
For a follow up to that, if I do, then does anyone have good instructions on that? I found one article on this but it seemed custom and made use of the mklink command, so I have my doubts this is correct.
Thanks

Thanks for the tip. What I wonder though is should I do that or does the 64-bit client have a 32-bit layer that works with 32-bit applications or, am I forced to still deploy a 32-bit client because of my 32-bit software?
Thanks

Can not configure Oracle 10g form on oracle 11g client

Hi
I need to install oracle 10g form in my system .
Here is my system
1. OS --XP
2. 32 Bit
4. Already oracle 11g release client installed ( I think that create the problem )
I tried to install oracle 10g form , it installed but can cont configure net manager for it , Always it point to 11g client and hence I could not configure .
Also I tried install Oracle Forms first then 11g client , But I got same issue .
I think if I created multiplr home one for 11g client and other for forms , it may work out .
Please help me
Debashis

While deploying the example 'VacationRequest' in the oracle complete guide for 11g, i got an exception like this
"12:08:15 PM] Deploying Application...
[12:11:16 PM] [Deployer:149191]Operation 'deploy' on application 'VacationRequestTaskFlow' is initializing on 'soa_server1'
[12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[12:11:24 PM] [Deployer:149193]Operation 'deploy' on application 'VacationRequestTaskFlow' has failed on 'soa_server1'
[12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: Failed to load webapp: 'VacationRequestTaskFlow.war'.
[12:11:24 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
[12:11:24 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
[12:11:24 PM] See server logs or server console for more details.
[12:11:24 PM] weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
[12:11:24 PM] #### Deployment incomplete. ####
[12:11:24 PM] Deployment Failed"
Can anyone help in this.

Odi 11g - IKM SQL to Hyperion Essbase (DATA) log file always empty

In odi 11g when using *"IKM SQL to Hyperion Essbase (DATA)"* setting the the "LOG_ENABLED" = true,
only an empty file are generated.
Just "LOG_ERRORS" file (if errors occurs) are created.
Is this just an my issue?
Can someone help me?
p.s.: the same issue, I got even with the *"IKM SQL to Hyperion Planning"*
Thx in advance, Paolo

Thanks John for your suggestion.
here the patch *"Patch 10302682: IKM SQL TO PLANNING: LOG FILE IS CREATED BUT NOTHING INSIDE."*
I didn't see any other about Essbase...
I try to check all day on support site.
Paolo
Edited by: Paolo on 19-apr-2011 8.44

ODI 11g Client

Similar Messages

Maybe you are looking for