ODI 11g Metadata Manager

Hi experts!
I'm trying install and test ODI 11g metadata manager.
I have installed it and deployed. At least status in weblogic console for ODI Metadata manager application is deployed.
But I cant find in doc what is the default link and port for this application.
Could you please explain how can I start MM to test it ?
Thanks in advance!

I have found url for ODI console it's http://10.51.0.13:7001/odiconsole/faces/shell/UIShell.jspx
But now can't log in.
I configured connections for work and master repositories but always get error:
Unable to connect to the specified repository. Please select a different alias and try again.
Any ideas?

Similar Messages

MSSQLServer jdbc connect problem on ODI 11G R2

I have a MS SQL Server jdbc connect problem on ODI 11G R2 / Windows server 2008 64 bits.
Tried, one by one, all versions of Microsoft drivers.
Sqljdbc4.jar copied to : %appdata%\odi\oracledi\userlib\
The Topology connect syntax is :
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL : jdbc:sqlserver://<host>:1433
=> All the topology tests end with time-outs.
Installed 10G ODI.
Works with 1.4 java and sqljdbc.jar version 2 jdbc driver.
Times out with version 3 and/or Sqljdbc4.jar + JAVA_HOME & ODI_JAVA_HOME set to 1.6 path.
also tried, with no success (time-outs) on either 10g or 11g :
com.inet.tds.TdsDriver
jdbc:inetdae7://<host>:1433?database=<DB>
same results for :
net.sourceforge.jtds.jdbc.Driver
jdbc:jtds:sqlserver://<host>:1433
Any suggestions for a fix?
Many thanks in advance.

Hello,
ODI (11g) Studio is certified on Windows 32 bit only, not on 64bit.
However you may still install it and configure ODI Studio to run with a 32 bit java.
Details pls see Master Note For ODI 11g Install Issues And Questions (Doc ID 1214428.1).
To connect to SQL Server:
# Check and make sure the authentication mode of your Microsoft SQL Server Server is set to "SQL Server and Windows" or "Mixed", otherwise Oracle Data Integrator (ODI) is unable to connect to the database.
# Before you create the Oracle Data Integrator (ODI) Dataserver in Topology Manager > Physical Architecture, stop all ODI processes, and place the JDBC Driver file in the ODI's userlib and "/drivers" folder.
For ODI Studio (Local No Agent)
%APPDATA%\odi\oracledi\userlib
%APPDATA% is the Windows Application Data directory for the user (usually C:\Documents and Settings\<user>\Application Data).
Standalone Agent
ODI_HOME\oracledi\agent\drivers
Note: If you decide to use the DataDirect driver that comes with ODI 11g install/ embedded in ODI 11g
weblogic.jdbc.sqlserver.SQLServerDriver
Then you don't need to worry about this step.
# Make sure that the database is the default database of the user account employed by ODI for connection, and that the password is correct.
# Verify (in your Microsoft SQL Server Server network configuration) that TCP/IP has been enabled on port 1433.
For more details see How To Set Up JDBC Driver Connections For The Microsoft SQL Server For ODI (Doc ID 423914.1)
If you try sqljdbc.jar, you need to configure ODI_JAVA_HOME to jdk1.5
sqljdbc4.jar, jdk1.6 (since ODI 11g requires jdk1.6, I'd suggest sqljdbc4.jar)
More see Compatibility Matrix For Java Machines And JDBC Drivers Used With ODI (Doc ID 807235.1)
Hope that helps other people who run into this,
Edited by: user742480 on Apr 4, 2011 12:06 PM

Odi 11g functions and sequence

hello
what is the use of fucntions and sequence.
How do i create them in odi11g .
where in odi 11g is expression editor window available??

User Function Editor
Use to define your customized functions.
User functions enable to define customized functions that can be used in interfaces or procedures. These functions are implemented in one or more technologies. They are usable in the interfaces and procedures.
A function can be created as a global function or in a project. In the first case, it is common to all projects, and in the second, it is attached to the project in which it is defined.
goto
Home > Designer Navigator Editors > Package Editor > User Function Editor
Sequence Editor
Use to define sequences.
A sequence is a variable that increments itself each time it is used. Between two uses, the value can be stored in the repository or managed within an external RDBMS table.
Oracle Data Integrator supports three types of sequences:
Standard sequences: the last value is stored in the repository.
Specific sequences: the last value is stored in an RDBMS table cell. Oracle Data Integrator undertakes to read the value, to lock the row (for concurrent updates) and to update the row after the last increment.
Native sequences: this type of sequence to a sequence defined in and managed by a database engine.
goto
Home > Designer Navigator Editors > Package Editor > Sequence Editor
There is no expression editor component directly in any tree of the odi components.
You can find expression editor where you can write expressions.
For example writing filter expressions in a mapping, writing procedure commands etc
for more details please visit www.odiguru.com
Thanks Guru
Ram Kumar Lanke
www.odiguru.com

Endeca ODI IKM metadata-import error

Hi
I am trying to use the metadata import tool using the tool specified here:
http://docs.oracle.com/cd/E40518_01/ikm.310/ikm_install_usage/toc.htm#Adding%20flexfield%20definitions
I have done all the settings as specified in the page in properties file and bat file but I get this error and upload does not happen.
tadata-import.bat OdiRepository.properties
Loading properties from:
c:\...\IKMSQLtoEndecaServer\3.1.0\tools\Od
iRepository.properties
ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
ODI_MASTER_URL=jdbc:oracle:thin:@<server>:1521:orcl
ODI_WORK_REP=WORKREP
ODI_MASTER_USER=DEV_ODI_REPO
ODI_SUPERVISOR=SUPERVISOR
Please specify the database user password for the ODI repository database:
Please specify the Work repository login password:
Loading ODI repository configuration complete.
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/security/jps/J
psException
        at com.endeca.eidi.odi.tools.OdiDataImporter.createOdiInstance(OdiDataIm
porter.java:98)
        at com.endeca.eidi.odi.tools.OdiDataImporter.connect(OdiDataImporter.jav
a:46)
        at com.endeca.eidi.odi.tools.OdiDataImporter.main(OdiDataImporter.java:1
81)
Caused by: java.lang.ClassNotFoundException: oracle.security.jps.JpsException
        at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
        ... 3 more
Please help.
Thanks

Hi
Thanks for your reply. Please find my answers below:
1. Have your config your ODI_SDK, ODI_JDBC_DRIVER_JAR. Whether or not the path is correct.
Yes, my paths are correct. I verified it by running it with incorrect paths and it would error out specifying that say "ODI_SDK" not found etc. Only if all my paths are correct it would error out at this level. Also if you see it clearly mentions "Loading ODI repository configuration complete." above.
2. Have you fully install ODI ,because some of jars didn't in the path you config in the metadata-import.bat.
Yes, I have installed ODI and I did a few sample regular DB to DB loads to validate that. Only after this I tried installing the KM.
3. Have you installed some software change the ODI SDK or odi jdbc driver jar.
No
4. This version metadata import tools only use for ODI 11g, because new version ODI has change its sdk, it didn't support ODI 12c right now.
I used ODI 11.1.1.1.7 which is certified for this KM downloaded from edelivery. I am aware 12C is not certified.
5. Did your use RCU to create the ODI master and supervisor.
yes, I used RCU 11.1.1.1.7 to create repositories.
Also, I tried doing this in two isolated environments - one on linux and one on windows. Both gave exactly the same error.
Please help. And let me know if you need any further information.
Thanks in advance.

Can we preview data after RKM in SAP in ODI 11g

can we able to right click and view data in models after reverse engineering in SAP in ODI 11g ??
Edited by: Drona on Mar 16, 2012 1:06 PM

No we cannot preview the data as SAP connection is made using Jco adapter.
We can only preview the data for data servers which are connected using jdbc.

Query Regarding Updation/Migration of ODI 10g To ODI 11g.

Hi All,
Currently I am using ODI 10g Version & Repositories ( Work & Master) have been installed on Oracle database version "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi"
We are thinking to migrate from ODI 10g to ODI 11g Version 11.1.1.5 & i have some queries which are metioned below.
1. Can we install ODI 11g Version 11.1.1.5 version with Repositories ( Work & Master) on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi" or do i need to upgrade my database version to 11G?.
2. If yes then, Can i upgrade or use exting Repositoires ( 10g one) for ODI 11g OR i have to create new Repositoires & move/migrate the objects of 10G repositories as mentioned in the Oracle installation doc.
3. Currently I am using OBIEE 10g for reposrting purpose & if i switch to ODI 11g , Do i need to use OBIEE 11g?
ODI gurus, I need your reponse ASAP & i have to share it on urgent basis.
Thanks
Edited by: neeraj_singh on May 15, 2013 9:58 PM

neeraj_singh wrote:
Hi All,
Currently I am using ODI 10g Version & Repositories ( Work & Master) have been installed on Oracle database version "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi"
We are thinking to migrate from ODI 10g to ODI 11g Version 11.1.1.5 & i have some queries which are metioned below.
1. Can we install ODI 11g Version 11.1.1.5 version with Repositories ( Work & Master) on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi" or do i need to upgrade my database version to 11G?.You can install ODI 11.1.1.5 but you have to upgrade your repositories using upgrade assistant
refer http://docs.oracle.com/cd/E23943_01/upgrade.1111/e12642/tasklist.htm#CIHGIDFG
2. If yes then, Can i upgrade or use exting Repositoires ( 10g one) for ODI 11g OR i have to create new Repositoires & move/migrate the objects of 10G repositories as mentioned in the Oracle installation doc.No need to create new repositories. You just upgrade them. But you need to takecare of certain things as you are a 10g user. Refer below link for the prerequisite
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e12642/prevusers.htm
3. Currently I am using OBIEE 10g for reposrting purpose & if i switch to ODI 11g , Do i need to use OBIEE 11g?Not clear about the question ?
>
ODI gurus, I need your reponse ASAP & i have to share it on urgent basis.
Thanks
Edited by: neeraj_singh on May 15, 2013 9:58 PM

How to search the indexes in 11g Enterprise Manager Console

Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.

Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M

Error when exporting to flat file in ODI 11g

This works ok in ODI 10g. I'm using IKM SQL to File Append on Windows Server 2008 R2
Getting the following error when exporting to a flat file in ODI 11g: ODI-40406: Bytes are too big for array
I've seen a couple of threads like this on the forum, but I've never seen an answer to the problem.

Problem is with the difference in behaviour for the IKM SQL to File Append KM between 10g and 11g.
Our 10g target file datastore had a mixture of fixed string and numeric columns. Mapping from the source to target was simple one to one column mapping. It generated the desired fixed format flat file; numerics were right adjusted with embedded decimal point and leading spaces. Each numeric column in the generated flat file occupied the exact space allocated to it in the layout. This gave the desired results, even though documentation for the 10g IKM states that all columns in the target must be string.
When we converted to 11g and tried to run this interface, it generated an error on the "numeric" columns because it was wrapping them in quotation marks. The result column was being treated as string, and it was larger than the defined target once it acquired those quotation marks.
In order to get 11g to work, I had to change all the numeric columns in the target data store to fixedstring 30. I then had to change the mapping for these numeric columns to convert them to right adjusted character strings (i.e. RIGHT(SPACE(30) + RTRIM(MyNumericColumn),30).
Now it works.

DATE Format Error in ODI-11g(11.1.1.3)

I am using ETL transformations in ODI-11g. There's a dominant issue regarding date formattings when I map an ODI variable (storing date) with a TGT column(datatype=date) mappings.
In all the src-tgt mappings I am formatting the date by using TO_DATE() functions. But still getting the error:
"ORA-01830: date format picture ends before converting entire input string".
A point to Note: The same ETL in other env are ruuning fine but in my new dev env it's giving this date error.
I had checked with the DBA folks and they confirmed they set equal DATE settings in all the env.
The ODI Variable is defined as an "Alphanumeric".
Tx Used: #BUSINESS_CURRENT_DT=TO_DATE('Date','YYYY-MM-DD')
Require some urgent advice...Please let me know

Hi,
W store name-value pair in the Control table from where we exctract our data. Both (param name and param value) are varchars.
Well this looks pretty strange in 11g! Here's what we found out...
If you are trying to retrieve a date variable by using TO_DATE() in the refresh query the ODI Java driver (JDK 1.6) would call java.sql.timestamp and gracefully attach HH:MI:SS.NS along with the date (YYYY-MM-DD HH:MI:SS.NS). My target ia a date always..!
So, when I do: TO_DATE('20101010','YYYY-MM-DD) in the refresh query ODI stores it as '2010-10-10 00:00:00.0'
For this the Load always fails as Oracle would not be able to interpret a timestamp by suing TO_DATE()
The Java driver does this damage. However, it may be wise to store as a timestamp rather as a date if in case u do a Data capture and want the exact time credentials.
Unfortunately not a req, as of now for us so I had to chop-off the timestamp..!
Let me know if you find any other details...
Thanks.!

Issue in creating Master repository from ODI 11g

Hi,
I am unable to create a Master repository connection using ODI 11g from local machine. I am using Oracle server of 11g version and have Master and a Work repositories in it. When I was trying to create a connection using ODI 11g it is throwing me the following error message,
Could not connect to repository
java.lang.IllegalStateException: Local Repository table is empty
     at oracle.odi.core.repository.support.RepositoryUtils$RepositoryInfoSource.loadRepositoryInfo(RepositoryUtils.java:182)
     at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo(RepositoryUtils.java:373)
     at oracle.odi.core.repository.Repository.getMasterRepository(Repository.java:72)
     at oracle.odi.core.OdiInstance.createMasterRepository(OdiInstance.java:501)
     at oracle.odi.core.OdiInstance.<init>(OdiInstance.java:553)
     at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:529)
     at oracle.odi.ui.docking.panes.OdiCnxFactory$1.run(OdiCnxFactory.java:205)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:619)
Suggest me to resolve this issue.
Regards, Sujeev

Try following links.
They are nice and Explanatory.
http://www.odigurus.com/2011/10/creating-master-repository-using-odi.html
http://odinetwork.blogspot.in/2011/03/creating-and-connecting-to-odi-master.html
http://odiexperts.com/creating-master-and-work-repository/
Thanks,
Mahesh

ODI 11g : JMS Queue XML Data Server creation

Hi Everybody,
I am facing a problem while i am trying to create a JMS Queue XML data server in ODI 11g. I have
the following details of the queue.
QueueManager=xxx;
TransportType=1;
HostName=ab.cde.fe.com;Port=77777;
Channel=CLIENT.TO.xxx1
destination name : SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01
user : xyz
password : 123
I have sussefully created an jms datasouce in weblogic name 'eis/jms/abc' and also I have successfully
retrived the xml message from queue in BPEL
(using a jms adapter where
JMS Provider : Third Party,
Jms Provider Jndi Name -eis/jms/abc,
Operation name : consume_message,
destinamtion name is queue:///SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01?targetClient=1).
But the new reqirement is to retive the xml data in ODI using "JMS Queue XML data server".I have tried
several ways(reading from internet) but failed to configure physical dataserver and reverse the xml message.
Also failed to understand properly the oracle post (http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/jms_xml.htm#CHDFCFBI).
Speically this portion "JNDI URL: <JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=<JMS_DESTINATION_NAME>.".
What will be the "JMS_RESOURCE" in my case.
How can I configure JMS Queue XML?
Please help!
Note : I don't have the XML message structure of the Queue(also DTD file). So , I have to reverse it.
Thanks & Regards,
Subhra
Message was edited by: SubhrajyotiKundu

Hi Everybody,
I am facing a problem while i am trying to create a JMS Queue XML data server in ODI 11g. I have
the following details of the queue.
QueueManager=xxx;
TransportType=1;
HostName=ab.cde.fe.com;Port=77777;
Channel=CLIENT.TO.xxx1
destination name : SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01
user : xyz
password : 123
I have sussefully created an jms datasouce in weblogic name 'eis/jms/abc' and also I have successfully
retrived the xml message from queue in BPEL
(using a jms adapter where
JMS Provider : Third Party,
Jms Provider Jndi Name -eis/jms/abc,
Operation name : consume_message,
destinamtion name is queue:///SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01?targetClient=1).
But the new reqirement is to retive the xml data in ODI using "JMS Queue XML data server".I have tried
several ways(reading from internet) but failed to configure physical dataserver and reverse the xml message.
Also failed to understand properly the oracle post (http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/jms_xml.htm#CHDFCFBI).
Speically this portion "JNDI URL: <JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=<JMS_DESTINATION_NAME>.".
What will be the "JMS_RESOURCE" in my case.
How can I configure JMS Queue XML?
Please help!
Note : I don't have the XML message structure of the Queue(also DTD file). So , I have to reverse it.
Thanks & Regards,
Subhra
Message was edited by: SubhrajyotiKundu

Odi 11g - IKM SQL to Hyperion Essbase (DATA) log file always empty

In odi 11g when using *"IKM SQL to Hyperion Essbase (DATA)"* setting the the "LOG_ENABLED" = true,
only an empty file are generated.
Just "LOG_ERRORS" file (if errors occurs) are created.
Is this just an my issue?
Can someone help me?
p.s.: the same issue, I got even with the *"IKM SQL to Hyperion Planning"*
Thx in advance, Paolo

Thanks John for your suggestion.
here the patch *"Patch 10302682: IKM SQL TO PLANNING: LOG FILE IS CREATED BUT NOTHING INSIDE."*
I didn't see any other about Essbase...
I try to check all day on support site.
Paolo
Edited by: Paolo on 19-apr-2011 8.44

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

Default Data Server for Hypersonic SQL in ODI 11g

Hi All,
I installed ODI 11g 11.1.1.6.0 for Win 7 with 10g DB R2 and WLS 10.3.5 successfully without any issues.
Created DEV_ODI_REPO Repository also without any issues.
Created Master Repository snpm1 and Work Repository as snpw1.
Created the Agents (Physical and Logical) and tested successfully.
Created the data servers for respective technologies
1) Technology Oracle -
    Data Server - ORACLE_ORCL_LOCAL
    Physical Schemas - SALES_DEV & SALES_PROD and
    Logical Schema as ORACLE_ORCL_LOCAL_SALES
2) Technology FILE -
    Data Server - FILE_GENERIC
    Physical Schema - FILE_GENERIC.E:/oracle/Middleware/Oracle_ODI1/oracledi/demo/file
    Logical Schema - FILE_DEMO_SRC
3) Technology - XML
     Data Server - XML FILE
     Physical Schema - GEO_D
    Logical Schema - GEO_DIM
4) Technology - Hypersonic SQL
     Data Server - HSQL   (Is this the correct name or some other name is recommended ? )
     Physical Schema - HSQL_LOCALHOST_20001_Default and HSQL_LOCALHOST_20001_Default
    Logical Schema - HSQL_DEMO_SRC and HSQL_DEMO_TARG
All the Mappings are done properly using Development & Production context for Physical and Logical Schemas.
I am able to create the Models for Oracle, FIle and XML with successful Reverse Engineering (standard with development context )
with all the data displayed correctly.
The issue starts here
The Main issue is for Hypersonic SQL where I am not able to get the Reverse Engineering.
Technology - Hypersonic SQL I have defined the data server as HSQL
Is this correct data server or some other name for data server is suggested ?
I am able to start the startdemo.bat file successfully opening the 3 dos prompt windows as
a) Oracle DI Demo - Repository Server
b) Oracle DI Demo - Source Server
c) Oracle DI Demo - Target Server
Later I make entries on the JDBC tab od HSQL - Data Server as
JDBC Driver : org.hsqldb.jdbc.JDBCDriver
JDBC Url : jdbc:hsqldb:hsql://localhost
Test Connection - ok with successful connection.
Prior to this I already run the script created schemas and inserted data to the SRC_ tables in my 10g Database as
ORDERS - containing the Tables as SRC_CITY, SRC_CUSTOMER, SRC_PRODUCT, SRC_REGION.....
In the Designer I create a new Model as HSQL_SRC
Technology - Hypersonic SQL
Logical Schema - HSQL_DEMO_SRC as defined earlier in logical schema.
Reverse Engineer Tab - Selected as Standard   Context selected as Development from drop down list.
When I right click on HSQL_SRC model for reverse engineer, it executes, however it does not display any tables inserted
as shown for ORDERS Schema.
Please correct me where I am wrong in giving the name for data server ? or some other place.
Thanks
Ajaz

Hi,
according to docs
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12644/hypersonic_sql.htm#ODIKM590
i see
JDBC Driver: org.hsqldb.jdbcDriver
JDBC URL: jdbc:hsqldb:hsql://<host>:<port>
could you modify
JDBC Driver : org.hsqldb.jdbc.JDBCDriver
JDBC Url : jdbc:hsqldb:hsql://localhost
according to docs?
Thanks

Do I need to install odi-public-ws.aar for ODI 11g?

Hello -
Prior to ODI 11g - used to upload odi-public-ws.aar to Axis2 on Application server. Starting in 11g do we still need to do that? I was told JAX-WS takes care of that. If that's the case - what URL is used to call the ODIInvoke from SOA? Is it still that same in ODI 11g as well? http://localhost:8888/axis2/services/OdiInvoke?wsdl ???????????
What I'm trying to do is integrate ODI 11g & SOA 11g(BPEL). I want to call a ODI Interface IN BPEL. Unsure how it works in ODI 11g?
Any pointers would be helpful
Thanks

the metalink note : How To Execute An ODI Scenario Using A Web Service [ID 795503.1]
provides answer how to deal with ODI 11g
tx

ODI 11g Metadata Manager

Similar Messages

Maybe you are looking for