ODI and Loading to/Extracting from Hyperion Planning **?

All,
first--I am not a Hyperion expert.
Clients have 2 requirements:
#1. Loading data ( flat file format residing in Windows environment) ''to'' Hyperion Planning 9.3.1
#2. Extracting Data 'From' Hyperion Planning 9.3.1 to a flat file ( residing in Windows environment)
Questions:
#1 I have looked at materials at OBE > ( http://ias.us.oracle.com/portal/page?_pageid=33,1704614&_dad=portal&_schema=PORTAL)
I have been able to reverse engineer a Hyperion application in ODI. but apparently that's not all, and there is additional work to be done in Hyperion itself
namely---'preparing' dimensional members, before loading any data.
Let's say the input data is comprised of: Product_code, Account_num, Period, Amount
Can someone explain how the following recommended steps by Hyperion example can plays out to load this data?
1) Loading Metadata? ( what needs to be added/changed in Hyperion diemnsion)
2) Loading Data?
#2 do we have to use ODI to create interface and extract/write data from Hyperion to a flat file? isn't there any Hyperion 'Facility' which does that?
any pointers is appreciated.
Thanks
ali

Hello,
Unfortunately there is no SSO option from "Planning to FDM" via Tasks.
The URL you should tell Planning to launch in a new window is 'http://<ServerName>/HyperionFDM'
If Planning can not execute that in a fresh IE window; then there isn't much that can be done.
It might also be advantageous to post this to the Planning group as well; since this isn't necessarily an FDM discussion.
Thank you,

Similar Messages

Sql Query need to extract the Work Flow information from Hyperion Planning

Can Any one give me the sql query to extract the Work flow from Hyperion Planning in 11.1.2.1.
I can extract from the Hyperion Planning but it is not in required format again I need to do lot of formating. I need the information as per the flow structure is showing linke in one perticular planning unit in all coloumn format. Hence only sql query will help me to extract this kind of information. could any one provide the sql query to extract this kind of request.
Thanks in Advance.
Edited by: 987185 on Feb 9, 2013 10:57 PM

If you have a look at the data models in - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip
There is the structure of the planning application tables, have a look at the HSP_PM_* tables
Alternatively you can look at extracting the information using LCM.
Cheers
John
http://john-goodwin.blogspot.com/

How can I delete only shared instance of a member from Hyperion Planning

Hello,
Can anyone tell me how I can instruct the Hyperion Planning IKM to delete a only specific instance of a shared member from Hyperion Planning? I've tried specifying the shared member, the parent of the shared instance, 'Shared' as the data storage type, and 'Delete level 0' as the operation. Instead of deleting just the shared instance under the specified parent, however, the IKM deleted the base member, which in turn deleted all shared instances of the member and all the data for the member (lucky thing I'm working in a development environment!). At one point I thought I had things working as I wanted, but now I think I must have mistaken.
Does anyone know definitively whether only a specific instance of a shared member can be deleted from Planning and, if so, exactly how to do it?
Thanks very much.

Well, with a careful review of my ODI interfaces and some additional testing I found my problem. My interface for one dimension was defined exactly as it should be and it worked as expected, whereas I found I had failed to activate the mapping for the data storage property in my interface for another dimension (DOH!). Naturally, the latter interface deleted the base member because the default data storage property value is 'Store'.
Thanks for testing and confirming that deleting only a specific shared instance of a member from Hyperion Planning does work, John.
(P.S. to John: I can't see how to change my "Helpful" tag on your first reply to "Correct", so if you want to post another reply, I'll mark it "Correct" (for more points!). Or, if you can tell me how to modify the "Helpful" tag to "Correct" I'll do that instead.)
Edited by: Mark on May 25, 2012 3:33 PM

FDM Drill through capabilty from Hyperion Planning

Hi,
I have currently some questions regarding the Drill through capability from Hyperion planning.
I successfully loaded a multiperiod excel file into FDM with the interface with this property :
Account     Centre     Description     Legal Entity     BU Product     Currency     Version     Application     Customer     Supplier
A     C     D     UD1     UD2     UD3     UD4     UD5     UD6     Default Supplier     V     V
ROYALTIES          Default_Site     SOI - Prime - 4 - 3400/4000 Å -     COMPANY_INC     4.PRO.RD0003.PF     USD     Sales Initial     App_1     Customer1     Default Supplier     100     200
When i did the drill back I could see all the info except the description. It is true that description field is not present in Hyperion planning but I thougth I could see it in the drill back.
On top of that I have been to my FDMApplication directory to see the file that is used in the drill back (SAMPLE0748.dat) and open it with notepad. I can see all the information except the description column.
Does anyone know how I can keep in FDM all the informations I want from my first excel file ?
Thank you,
David

I understand what you explain to me and I agree.
Only one problem is that I don't think in my Hyperion Application I use the account description or Description 2 that would explain the fact I can not use it in the drill back.
So my next question on this topic is, how do I make sure that I can copy attributes values in FDM into Planning.
For your info I check on the workbench and "Account description" & "Description 2" are under my application "Attributes dimensions"
By the way I have an other question wich is not far from the last one.
Regarding the drill back if do an import like this :
CUST1     (Mapping)     GROUPCUST1      100
CUST2     (Mapping)     GROUPCUST1 200
Will I be able to see in the Drill back CUST1 & CUST2 ?
by the way do you agree with this discussion Dimensions/Fields Displayed on Drill through screen ? Because it is something I wanted to do in FDM...
Thanks again,

Pre-requisites for Drill-Down from Hyperion Planning to Oracle GL

I am using Hyperion Planning 11.1.2 for maintaining budgets. I do comparison of actual vs budget in Hyperion. I export actual results from Oracle General Ledger (11.5.10) in flat file and upload to Hyperion planning using FDM. I maintain mapping in FDM for flat file and the Hyperion members.
Q1) Is it possible to drill down actual numbers from Hyperion planning to Oracle General Ledger via FDM?
Q2) If yes, what are prerequisites for using drill-down functionality?
Can anyone please answer and refer some link/material that may help me in setting this up?
Thanks in advance.

Thanks
But when i try to log in i m getting error bellow"
Failure of server APACHE bridge: No backend server available for connection: timed out after 10 seconds or idempotent set to OFF."
So do u have any other reference plz
thanks

Use ODI to Extract Data from Hyperion Planning & Budgeting report to Excel

Hello
Can someone tell me please how to Extract Data from (Financial Reporting in) Hyperion Planning & Budgeting into Excel Using ODI?
Would the steps be the same as Creating an ODI Project and Interface: Exporting a Flat File to a Flat File? If not, why?
Best Regards.
Edited by: Saturday on May 26, 2012 9:55 PM

Where do you think the financial reports get their data from? Financial Reports pull data from data sources such as Essbase, HFM.
Cheers
John
http://john-goodwin.blogspot.com/

Drill back from hyperion planning

hi,
We are extracting data from ERP and using ODI and we are loading into EPMA planning application. In this scenario can we do a Drill back from Planning Webform/HFR/Analyzer/Smartview to Oracle ERP system using ERP integrator? We don't have FDQM. Is it possible to drill back in our scenario without using FDQM and just using ERPi?
Regards

I thought that if you are using the ERP integrator as the source and then drill-back it will take you to the ERP landing page
For example :- http://www.oracle.com/ocom/groups/public/@otn/documents/digitalasset/120599.gif
Cheers
John
http://john-goodwin.blogspot.com/

Outline Load Utility error using Hyperion Planning 11.1.2

I am using Outline Load Utility to extract outline from Hyperion Planningin .csv format.
We have three planning cubes and I am trying to extract a dimension that is only a standard dimension in the third cube. However, I get this error message:
Error: Unable to obtain dimension information and/or perform a data load: com.hyperion.planning.sql.HspMember cannot be cast to com.hyperion.planning.sql.HspTimePeriod
When I check Shared Services, the dimension is not part of standard dimensions in Global Artifacts for the app. I can see it under the specific Plan Type as a standard dimension.
When I try to extract any of the dimensions under the Global Artifacts, the command is successful. Here is the syntax I type for outline load command:
OutlineLoad /A:HFPlan2 /U:admin /-M /E:c:/position_export.csv /D:Position /L:c:/outlineLoad.log /X:c:/outlineLoad.exc
Please advise if I need to add something else to the command or totally use any other tool.
Thanks!

Log an SR with Oracle, because that is a varchar field with I think 2000 char limit.
Is that happening for just that application (do you have other apps, or can you create a sample application)
Regards
Celvin

Loading HFM data to Hyperion Planning using FDM

Hi All
Has anyone ever used HFM as a data source for FDM?
Someone has asked me for the best way to get data from HFM into Hyperion Planning and whether FDM can manage that. I know there is a generic Pull adapter and the ERPi but I'm not sure whether either of those will do the job.
At the moment I am assuming that they will need to extract data from HFM to flat file and then import to FDM as a 2 stage process?
Any thoughts?
Thanks
Stuart

Hi Tony
Apologies for the delay (my email spammed the notification that you had replied, helpful!!). When you say that you have done it but discourage accessing the tables directly how did you achieve this? Were you just careful which data intersections your selected from the tables (e.g. always base level data so it is stored not calculated)?
I have used the HFM relational tables a couple of times to make use of the metadata that they contain but not tried to get data before.
Regards
Stuart

Loading Smart List to Hyperion Planning 11.1.2.0

Hi !! I am new to Hyperion Planning. I need to upload the SmartList into Hyperion Planning using Outline load utility. Could you please show me the steps.
I just need some sample metadata may be two or three line of metadata that will give me idea to generate our metadata file..
I have created outline utility syntex .. .please guide me....
any help from you would really appreciated...

Dear John
Please help to load the smartlist, I am getting the following error.
Successfully located and opened input file "d:\smartlist_create1.csv".
Header record fields: SmartList Name, Operation, Label, Display Order, Missing Label, Data Form Setting, Entry ID, Entry Name, Entry Label
Located and using "HSP_SMARTLISTS" dimension for loading data in "acpt" application.
Parent-child ordering option (/H switch) will not be performed: this option is not available for the "HSP_SMARTLISTS" dimension.
Input file member load ordering option (/O switch) will not be performed: this option is not available for the "HSP_SMARTLISTS" dimension.
Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
Examine the Essbase log files for status if Essbase data was loaded.
Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
Unrecognized column header value "Data Form Setting".
Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
I have used the same structure as provided in your earlier thread.
OutlineLoad /A:acpt /U:admin /M /I:d:/smartlist_create1.csv /DS:HSP_SMARTLISTS /L:c:/OutlineLogs/outlineLoad.log /X:c:/OutlineLogs/outlineLoad.exc
SmartList Name, Operation, Label, Display Order, Missing Label, Data Form Setting, Entry ID, Entry Name, Entry Label
SL1,addsmartlist,SL1Label,,,,,,
SL1,addEntry,,,,,,entry1,entrylabel1
SL1,addEntry,,,,,,entry2,entrylabel2
PLEASE HELP.
Regards
Sim
Edited by: SimT on May 14, 2012 7:22 PM

Unable to drill back to the FDM from Hyperion Planning

Hello,
We are using FDM version 11.1.2.2.00 for integration with Oracle E-Business Suite. We have configured FDM to load the data in three cubes in Hyperion Planning i.e. Opex, Capex and Manpower. When we drill back to the source system after loading the data, The drill through to the source system sucessfully runs for opex and capex. But when we click on 'Drill to the Source' from web form in Hyperion planning, it gives below error.
Error: No Locations were found matching the passed intersection values. Please verify:
1) that the target system (originating the drillback) is properly configured;
2) that the FDM POVs have not been retroactively modified or compromised.
In FDM error log, the error is as below.
ERROR:
Code............................................. 7123
Description...................................... INSERSECTION SQL DEBUG
Procedure........................................ SELECT vDataFact.PartitionKey, PartName, CatName, CatTarget, PeriodKey, PeriodDesc, DataView, AccountX, EntityX, ICPX, UD1X, UD2X, UD3X, UD4X, UD5X, UD6X, UD7X, UD8X, UD9X, UD10X, UD11X, UD12X, UD13X, UD14X, UD15X, UD16X, UD17X, UD18X, UD19X, UD20X, SUM(DECODE(ChangeSign, 0, (Amount), 1, (Amount *-1), (Amount))) AS Amt From vDataFact Where (((CatTarget) = N'ACTUAL') And ((PeriodTargetM) = N'4/1/2013 12:00:00 AM') And ((YearTarget) = N'FY13') And ((CalcAcctType) > 0) And ((AccountX) = N'71104-011-AC') And ((EntityX) = N'00E') And ((ICPX IS NULL) or (ICPX = N'') or (upper(ICPX) = N'[ICP NONE]')) And ((upper(UD1X)) = N'APPROVAL-WIP') And ((UD2X IS NULL) or (UD2X = N'') or (upper(UD2X) = N'[NONE]')) And ((upper(UD3X)) = N'NO CUSTOM DIM1') And ((upper(UD4X)) = N'NO CUSTOM DIM2') And ((upper(UD5X)) = N'00-00000-CC') And ((UD6X IS NULL) or (UD6X = N'') or (upper(UD6X) = N'[NONE]')) And ((UD7X IS NULL) or (UD7X = N'') or (upper(UD7X) = N'[NONE]')) And ((UD8X IS NULL) or (UD8X = N'') or (upper(UD8X) = N'[NONE]')) And ((UD9X IS NULL) or (UD9X = N'') or (upper(UD9X) = N'[NONE]')) And ((upper(UD10X)) = N'REGULAR BUDGET') And ((UD11X IS NULL) or (UD11X = N'') or (upper(UD11X) = N'[NONE]')) And ((UD12X IS NULL) or (UD12X = N'') or (upper(UD12X) = N'[NONE]')) And ((UD13X IS NULL) or (UD13X = N'') or (upper(UD13X) = N'[NONE]')) And ((UD14X IS NULL) or (UD14X = N'') or (upper(UD14X) = N'[NONE]')) And ((UD15X IS NULL) or (UD15X = N'') or (upper(UD15X) = N'[NONE]')) And ((UD16X IS NULL) or (UD16X = N'') or (upper(UD16X) = N'[NONE]')) And ((UD17X IS NULL) or (UD17X = N'') or (upper(UD17X) = N'[NONE]')) And ((UD18X IS NULL) or (UD18X = N'') or (upper(UD18X) = N'[NONE]')) And ((UD19X IS NULL) or (UD19X = N'') or (upper(UD19X) = N'[NONE]')) And ((UD20X IS NULL) or (UD20X = N'') or (upper(UD20X) = N'[NONE]')) ) GROUP BY vDataFact.PartitionKey, PartName, CatName, CatTarget, PeriodKey, PeriodDesc, Dataview, AccountX, EntityX, ICPX, UD1X, UD2X, UD3X, UD4X, UD5X, UD6X, UD7X, UD8X, UD9X, UD10X, UD11X, UD12X, UD13X, UD14X, UD15X, UD16X, UD17X, UD18X, UD19X, UD20X ORDER BY PartName
Note: The above error is not able to capture the value for UD6 which is 'Employee' Dimension , UD7 which is 'Jobtitle' Dimension and UD9 which is 'Nationality' Dimension in ERPi.
Can you suggest how these values can be correctly captured while drill through to the source system?
Thanks in advance
Faizan Memon

Hi,
In that case can you pls confirm the location is correct or not. Try to check the location from where it is drilling back the data. Compare the location with Opex/Capex scenario. It is not an integration issue, something you are missing, otherwise you will face issues with Opex & Capex also.
Soumya

Migration From Hyperion Planning v3.3 to Hyperion Planning v11.1.1.3

Hi Friends,
Could you please list out steps to follow from migration Hyperion Planning v3.3 to Hyperion Planning v11.1.1.3.
Thanks in advance
Regards..
Sai.

You can use Oracle Lifecycle Management to help migrate to a newer version. Did you mean to say v9.3 to v11.1.1.3?
Manually you would first create a fresh HP 11.1.1.3 enviornment and application, then export from older version to newer version;
Outline, metadata, members, calc scripts, business rules, forms, reports, ect..... Then you get all of your data loaded, or as much of the data you want or need.
Consolidate and validate.
Mike

Error While Creating Essbase Database From Hyperion Planning

Hi,
While creating the Essbase Database From the 'Manage Database' in Hyperion Planning, I am getting the following error:
com.hyperion.planning.olap.EssbaseException: Account (1060000)
It gets stuck at Adding Dimensions.
I have tried reconfiguring Planning, but no luck.
My Relation Repository is MS SQL Server 2005 and the Essbase and Shared Services are on a Linux box.
I am getting the following error in the Planning log
[12-Nov-2009 10:50:41]: Propegating external event[ FROM_ID: 68b6dbf1 Class: class com.hyperion.planning.sql.HspLock Object Type: -1 Primary Key: 50001 ]
[12-Nov-2009 10:50:41]: Processing cube: Plan1
[12-Nov-2009 10:50:41]: Setting System CFG properties for Attribute Dimensions
[12-Nov-2009 10:50:41]: Adding dimension: Account
[12-Nov-2009 10:50:41]: Closing outlines
com.hyperion.planning.olap.EssbaseException: Account (1060000)
     at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
     at com.hyperion.planning.olap.HspCubeRefreshTask.addDimension(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
     at com.hyperion.planning.HspJSImpl.runCubeRefresh(Unknown Source)
     at com.hyperion.planning.HyperionPlanningBean.runCubeRefresh(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
     at sun.rmi.transport.Transport$1.run(Transport.java:153)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     at java.lang.Thread.run(Thread.java:595)
Thanks for your help.
Edited by: user524093 on Nov 12, 2009 4:38 PM

Have you tried restarting the services and giving it a try?
Which version of Essbase/Planning are you on?
If your Essbase server name has more than 30 characters, please use NODENAME with short server name.

Remove access for each member of a particular dimension from Hyperion Planning Applciation

We are trying to remove access for groups for each member of a particular dimension( which has more than 1000 members) of a Hyperion Planning application. We are going through Administration->Manage DImensions -> member , Under security click view and select the group and then remove access But the problem is there are more than 1000 members under this dimension , so it will be time consuming to go to each member and then remove access for the group. Is there any other way we can do this?
Also is there a way to bulk delete native directory groups from Hyperion Shared services, instead of deleting each native group manually one by one?

The reaso we want to go for Relational tables is that when we did Exportsecurity utility for that planning application and imported back the SecFile.txt without doing any changes ,still it errored out giving errors like :
"The following access not imported:-"PLN-ORG-0278-999 Bureau Strtgc & Oprtnl ""PLNning",0278-999,READWRITE,MEMBER due toInvalid user name found in the file."
It is erroing out even if we did not do any modifications to the secfile.txt.
Moreover there are more than 1000 members for which we have to remove access permissions manually one by one. It is a tedious process.
So we are looking at other options like , which relational tables have got Native directory groups information, and the sql queires we can execute to remove the unwanted Native directory groups from Shared Services?

How to Enable Plugin before File Opened And Load PDF File From memory?

hello everyone,
there have two problems,all i want to do is to show a pdf file encrypted by AES algorithm.
1.one is how to enable plugin before file opened?
i developed another two plugin,and each enabled after one pdf file was opened,and now i want to replace the file open command and can do some word by meself,such as decrypt the pdf ?
2.another is how to load pdf file from memory?
if i can enable plugin before file opened,and than i can read the file and decrypt it,and now i want to do is do load the decrypt file (in memory) into the adobe?
i tried many method,but all in vain.who can help me or give me some advice?
thanks.
merry chrismas to everyone.

The proper way to handle other file formats (even where it is really a PDF that has been "wrapped") is to create an AVConversionHandler.
To load a PDF from a source other than the file system, you need to create a custom AVFileSys.

ODI and Loading to/Extracting from Hyperion Planning **?

Similar Messages

Maybe you are looking for