ODI Beep throws error - is this normal?

Hello,
Sometimes ODIBeep throws this error:
ODI-1226: Step zakoncz dzialanie fails after 1 attempt(s).
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: java.lang.InternalError: Can't connect to X11 window server using 'eB-ETL1.puw:10.0' as the value of the DISPLAY variable.
My server don't have X installed and this step is executed by agent. Why OdiBeep wants to use X server? Is this normal? Also, sometimes this error is thrown, sometimes does not. Can I prevent this error or I should rather to avoid using OdiBeep?

yasar11732 wrote:
Ohh, I just realized something. My slim.log file keeps spamming:
Failed to open VDPAU backend libvdpau_nvidia.so: paylaşımlı nesne dosyası açılamıyor: Böyle bir dosya ya da dizin yok
"paylaşımlı nesne dosyası açılamıyor: Böyle bir dosya ya da dizin yok" ==> "Shared object cannot be opened. No such file or directory"
This might have happened after power shortage. My computer started acting weird since. What might be causing this?
Flashplayer.

Similar Messages

Why Webdynpro framework is throwing error in this testcase

Hi All,
In my requirement i'm using the WTGXXX(for Discount field) in Webdynpro ABAP.
If I validate the entries there is a standard check performed by the webdynpro framework when entries other than the numercie fields are given.
This is a webdypro ALV.
For Ex:
when the discount is given as (9-33) it is throwing the error that "The entered value can only contain numerical characters" but it is not throwing any error for (9-(9/22)) or (9-(42)) instead it is calculating the values which is a good feature. But why, (9-33) this case is not handled.
I tried to keep the value in duegging it is working fine.
Before any event gets trigerred for the above cases the value is calculated by the framweork by defalut.
Some times some cases are handled sometimes not.
I'm unable to get this behavior of the framework.
For the first time (9-3*3) calcuation is throwing error from the 2nd time onwards this is giving the correct output. When I load the view for the first time and do this check then error is thrown, second time when the other calcuations are done and again do this calcaulation then this error is not shown instaead it is giving me 0 which is the result.
This case applies to the cases where the expressions result in 0 (defalut values)
One mroe test case for this is - (9-9).
Eventhough the user knows the result of these expresions, these are throwing errors.
How to handle this.
I tired handling this with own DE/Domanin CURR 15 but for the 1st time this error is theon 2nd time on wards the reuslt is shown correct.
Isn't a special case.
When I bound the table again with INITIAL data then again the erorr is thrown for that case.
ie I have one RESET button where i will bind the table again with the INITIAL table entries then agian the error is thrown for (9-3*3).
Is there any SAPNOTE applied or Exceptions to this. Please let me know.
Please replicate the same in Webdynpro Java also and share the reasons.
Currently I'm doing this by taking the string only to avoid these erorrs in case of Zero.
Regards,
Lekha.

Hi
Use another forum for Webdynpro questions: Web Dynpro ABAP
BR, Sergei

Wow, what a pain install is, still have errors, is this normal?

I am new to the Adobe community, I tried a trial of cs4, then purshased it, design premium. That was a few months ago, all is well until I tried to install my upgrade to web premium cs5. The PC has crashed twice, and it has more than enough memory and speed. It is only a few months old, about 15 days older than the cs4, nothing on it but Adobe and micorsoft office.
I am up and running, but have these install errors
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s), 7 warning(s)
WARNING: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.FEA745P-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091 e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Web Premium CS5\Adobe Pixel Bender Toolkit 2.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\Pixel Bender Toolkit.exe
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-FFPlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-IEPlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-OfficePlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-mul\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeFireworks11All\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeFireworks11en_USLanguagePack\OEM
ERROR: 146 Unable to delete backup file at "C:\adobeTemp\backup\adobetmp367566130" Error 5 Access is denied.
ERROR: 146 Error committing command ARKDeleteFileCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 8 warning(s)
WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
WARNING: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.3E634FP-1020rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091 e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Web Premium CS5\Adobe Pixel Bender Toolkit 2.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\Pixel Bender Toolkit.exe
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-FFPlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-IEPlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-OfficePlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-mul\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeFireworks11All\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeFireworks11en_USLanguagePack\OEM
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s), 7 warning(s)
WARNING: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.8E89C6P-1020rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091 e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Web Premium CS5\Adobe Pixel Bender Toolkit 2.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\Pixel Bender Toolkit.exe
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-FFPlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-IEPlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-OfficePlugin\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeContribute6-mul\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeFireworks11All\OEM
WARNING: File/Folder does not exist at E:\Adobe CS5\payloads\AdobeFireworks11en_USLanguagePack\OEM
ERROR: 146 Unable to delete backup file at "C:\adobeTemp\backup\adobetmp3675630966" Error 5 Access is denied.
ERROR: 146 Error committing command ARKDeleteFileCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
I do appreciate all of the loyalty to adobe products, but as being new to pourchasing an upgrade, this seems a lot of money to have all of these issues
is this normal for adobe and should I get used to substandard performance in the beginning of a product launch. I am pretty sure the first crash had to do with being pestered by windows asking for feedback and these windows were fighting with the antivirus program and firewall. I had to turn off the firewall and antivirus to install. seems that smart software designers would anticipate people having firewalls on pc designed to be hooked up to the net
Chuck

Any CPU temperature below the ambient/room temperature can not be real. If you care about the real temperature of the CPU although your system is stable the monitoring software and/or sensor need calibration. I did the following way if you are interested.
https://forum-en.msi.com/index.php?PHPSESSID=490a9bbb54d469c0656f7c7a8618e17a&topic=76096.0
Cheers

Dialog box throws error "This content cannot be displayed in a frame"

I have disconnected a SP2010 db and re-connected to a new SP2013 farm. The visual upgrade is not yet done and decided to continue with sp2010 UI for now. In SP2013, I get the following error when I click "Add new item" in a list and "New
user" in a SP Group. Any dialog simply throws error.
This content cannot be displayed in a frame.
To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame.
I have also added "<WebPartPages:AllowFraming runat="server" />" and <meta http-equiv="X-Frame-Options" content="allow">
to the master page but no luck.
Your assistance wil be appreciated.
Thanks

Hi,
This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Deployejb and ejbdescriptor throws error

I tried to deploy the ejb application to database using oracle
tool deployejb at DOS prompt,, like this
deployejb -republish -temp H:/myprojects/temp -user system -
password aabbcc -service %ORACLE_SERVICE% -verbose -descriptor
My8iEJB.ejb -generated My8iEJBClient.jar My8iEJB.jar
where ORACLE_SERVICE = sess_iiop://ventas.ideas:1521:vtas
this throws error like this
Unable to initialize threads : cannot find class java/lang/Thread
And tried ejbdescriptor like this
ejbdescriptor -parse My8iEJB.txt My8iEJB.ejb
this throws error like this
Class not found : de

I tried to deploy the ejb application to database using oracle
tool deployejb at DOS prompt,, like this
deployejb -republish -temp H:/myprojects/temp -user system -
password aabbcc -service %ORACLE_SERVICE% -verbose -descriptor
My8iEJB.ejb -generated My8iEJBClient.jar My8iEJB.jar
where ORACLE_SERVICE = sess_iiop://ventas.ideas:1521:vtas
this throws error like this
Unable to initialize threads : cannot find class java/lang/Thread
And tried ejbdescriptor like this
ejbdescriptor -parse My8iEJB.txt My8iEJB.ejb
this throws error like this
Class not found : de

SharePoint Designer: throwing error while open my sharepoint web applicaiton

When i try to open web application in sharepoint designer. I can't able to open it throw error like this
An Error occured accessing your Microsoft sharepoint foundation site files. Authors - if authoring against a web server, please contact the webmaster for this server's web site. WebMaster - please see the server's application event log for more details

This error occurs if you try to use a reverse proxy to rewrite the response body contents for a SharePoint site as well. We were attempting to inject a Google analytics tracking javascript in the body of all responses. The code never did show up
successfully and this error message resulted as well. We eventually discovered a web solution out on Codeplex that allows you to add the Google analytics tracking script. This article hinted at the root cause:
http://support.microsoft.com/kb/329362/en-us

Tring to update the software on a 4th gen touch and I get an error and then stops downloading. It is very slow to download, says 9 hours for 847MB, is this normal?

I have a 4th gen ipod that a friend gave me and he forgot the passcode. So I am in recovery mode and trying to update the software. It is a 847MB file and it says its going to take 9 hours, but then I get an error and stops downloading. When you restart, it goes from zero. Is any of this normal. Is there a faster way to update the software?

The Apple server a likely overloaded with the IOS 8.3 update.
You can try using these instructions but select iOS 6.1.6 for the 4G iPod. If yo select any other file you will get errors:
How to Install iOS 8.1.3 Update on your iPhone, iPad and iPod touch
Use the Step 5 update using iTunes instructions but download the iOS 6.1.6 firmware for the 4G iPod. Note that if you try to restore to earlier than 6.1.6 you will only get errors

HT5022 10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

You are trying to install a version of Airport Utility earlier than 6.0, correct? If so see the following: Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.

IF i'm on a call and try to use the internet function, I get an error message. Is this normal?

IF i'm on a call and try to use the internet function, I get an error message. Is this normal?

Depending on your carrier, with AT&T there shouldn't be a problem.
If you with Verizon, you will need to be on Wifi, to do that.

Xorg Error. Is this normal?

Hi,
I'm using intel drivers but X tries to load vesa module. Is this normal?
[yasar@yasar_laptop ~]$ grep EE /var/log/Xorg.0.log
[ 20.753] Current Operating System: Linux yasar_laptop 2.6.38-ARCH #1 SMP PREEMPT Sun Apr 17 14:51:34 UTC 2011 i686
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.036] (II) Loading extension MIT-SCREEN-SAVER
[b][ 21.213] (EE) Failed to load module "vesa" (module does not exist, 0)[/b]
[b][ 21.215] (EE) Failed to load module "fbdev" (module does not exist, 0)[/b]
[yasar@yasar_laptop ~]$ lspci | grep -i display
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
[yasar@yasar_laptop ~]$ pacman -Q xf86-video-intel
xf86-video-intel 2.15.0-1

yasar11732 wrote:
Ohh, I just realized something. My slim.log file keeps spamming:
Failed to open VDPAU backend libvdpau_nvidia.so: paylaşımlı nesne dosyası açılamıyor: Böyle bir dosya ya da dizin yok
"paylaşımlı nesne dosyası açılamıyor: Böyle bir dosya ya da dizin yok" ==> "Shared object cannot be opened. No such file or directory"
This might have happened after power shortage. My computer started acting weird since. What might be causing this?
Flashplayer.

Validation not working on Qualified Field!!!! is this Normal!!!

Hi All,
I have an Integer field in the Qualified table.
Name-> Non Qualifier -> Type Text
Code -> Qualifier -> type Integer
Now, i need to write a validation which throws error If user enters a number whose length is less than 4 or greater than 4.
The business requirement is User should enter Exactly 4 Numeric values. Not less and not more.
As integer type field done not control Field length i have written a validation.
I have written a validation..
IF(IS_NULL(MAINLOOKUP.Code),1,IF(LEN(MAINLOOKUP.Code)<4 , 0 ))
But this is not working.
this works for a Normal Integer field which is in Main table, But this is not working when Code field is in Qualified table!!!
Is this the normal Behaviour of MDM??
Or am i missing something!!!
Experts please provide your suggestions.
Note: i changed the Code field to Text and made length as 4 in field property, But this is not controlling if user keys in only 2 values.
So written the above validation on text field as well, But it does not work.
Kind Regards
Eva

Hello Eva
Ok
Just imagine
you have some record in your main table with some QLUT
Qlut contain next fields
item_name - type text
item_value - type integer qualified = yes
and list of values
q1
q2
q3
q4
your main table contain next fields
name-text
Qlut->your Qlut
qlut_code->text
qlut_value_>text
For qlut_code create assignment like Qlut.code
For qlut_value create assignment like Qlut.value
add some records to main table like this:
name=test1
in qlut select next:
item name =Q1
item value=1
item name =Q2
item value=2
item name =Q3
item value=3
and another one record in main like this:
name=test2
in qlut select next:
item name =Q1
item value=1
item name =Q3
item value=3
item name =Q4
item value=4
item name =Q3
item value=33
select both records and run both assignments
If your assignments is correct
In first main record you have got
qlut_code=3:Q1;Q2;Q3
qlut_value_>3:1;2;3
for second main record you have got
qlut_code=4:Q1;Q3;Q4;Q3
qlut_value_>4:1;3;4;33
Then you can use records values from qlut_code and qlut_value for validation
This is work fine.
I hope, you have got my point
Regards
Kanstantsin Chernichenka
Edited by: kanstantsin_ch on Oct 6, 2011 1:35 PM

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

SL500 throws error 1804 (unauth. WAN card), impossible to boot

Just as a note upfront: I'm aware of similar threads like for example SL300 throws error 1804 (unauth. WAN card), impossible to boot. So here is my posting:
I get the 1804 error during boot. I can not enter BIOS any longer. Yesterday I could boot one time despite the fatal error message that says it halts the system (and it does normally), I somehow managed to get into the BIOS anyway, changed some settings and the could boot into the OS. Unfortunately today this does not seem possible any longer.
I tried to remove the WAN card to boot again but one of the two screws is wasted and I can not remove it. The other went out with no problems. So right now, the card is stuck inside and I can not remove it.
I also tried to disconnect the CMOS backup battery, but this did not help.
So I need help from someone with actual technical expertise to circumvent that fatal error on boot time. I know that normal IBM/Lenovo support personal can reset the bios, change the serial number etc. So I assume some tools and key-kombinations exist so that I can still boot this laptop.
As written, yesterday already I could boot that laptop even that error comes all the time. But I don't know how I managed that.
The only way I can imagine right now is to physically break up the WAN card so that it can removed in parts and the edge with the screw in can stay in while the card is destructed and therefore could be disconnected from the slot. However doing that, there is high risk to destroy more of that computer which I would like to prevent.
Any help is greatly appreceated. The WAN card was not in use. I have no clue why that problem pops up after years of use of that devide without any changes.

If you can enter BIOS again, go to Security > I/O Port Access > WWAN and set it to Disabled.
As for the screw/card, I had the exact same experience with an X61's WLAN card. It's far harder to rip apart the card than it is to drill through the screw head. (I ended up trying to snap the card before drilling, so...)
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

There was an error opening this document. Access denied.

Greetings,
When I did my taxes last year (March 2012), I downloaded some pdf files from the IRS. Form 1040 was a writable file and I filled it out as needed. This file was saved on a Vista machine running XP. A few months ago, I upgraded that pc to be Windows 7 SP1.
Today I'm getting ready to do my taxes for this year. When I double click on last year's Form1040.pdf, I get the following error message:
There was an error opening this document. Access denied.
Interestingly, I can open other pdf files, like the Form 1040 Instructions. I do not think that I password protected my Form1040.pdf. The reason that I think it isn't password protected is because I'm not being prompted to enter a password.
I copied the file to an old spare XP machine (XP Home, version 2002, SP3) that I have and it opened fine. It did not prompt for a password. I printed copies of last year's forms from that XP machine, so this isn't an emergency for me, but it is mildly annoying that I can't figure out what's wrong.
I have Adobe Reader XI version 11.0.2 installed on both machines (the Windows 7 machine and the old XP machine).
To summarize, it was created on Vista, I can't open it with Windows 7, but I can open it with XP.
Normally I would consider uploading the file in question, but in this case, I hope you'll agree that might be a bad idea!
Advice on how to get this to work on Windows 7 would be appreciated.

Pat Willener: Thanks! That solved the problem.
For anyone else having this problem, here's a detailed list of how I used Pat's advice to solve my problem:
1. Right click on the problematic file
2. Select Properties
3. Select the Security tab
4. Press continue
5. In the "Permissions for MyFile.pdf" dialog, press "Add".
6. In the "Select Users or Groups" dialog, press "Advanced".
7. The next dialog that pops up is also named "Select Users or Groups". Press "Find Now".
8. Scroll down the list of search results until you find your username.
9. Double click on your username.
10. Press ok in the "Select Users or Groups" dialog.
11. Press ok in the "Permissions for MyFile.pdf" dialog
12. Press ok in the Properties dialog.
done.

ODI Beep throws error - is this normal?

Similar Messages

Maybe you are looking for