ODI - Can it be installed on Linux 5?

Hi,
We have Red Hat Enterprise Linux 5 in our company. We need to know if ODI is supported on Linux 5 since we are getting error that the OS should be red hat release 3 or 4. Here is the log message we get when we try to run the installer.
@abc~/software/odi_101340/setup/Linux$ ./setup.sh
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3 or redhat-4Exiting Oracle Universal Installer, log for this session can be found
at
/tmp/OraInstall2008-06-01_06-24-46AM/installActions2008-06-01_06-24-46AM.log
xyz@abc:~/software/odi_101340/setup/Linux$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5
Can anyone who were able to make it work on Linux 5, help or confirm if this is possible?
Thanks,
Srini

I'm trying to install OpenSparc T1 Architecture and Performance Model. Does it need Solaris, or I can run it on linux as well. In the website it says it needs solaris.
When I try to follow the steps on the README file, it asks to download OpenSparcT1_SAM.tar.bz2, which does not exist anywhere. I thought this is just refering to the OpenSparcT1_Arch.1.5.tar.bz2 with different name. But no, it keeps refering to files that does not exists when I extracted the .tar file. Like OpenSPARCT1_SAM.cshrc
When I try to follow the steps on README.sam file, I cannot find the files refered to this document like setup_sam.sh

Similar Messages

Can OpenSPARCT1 be installed on Linux?

Can OpenSPARCT1 be installed on Linux, or it can only be installed on Solaris?
Thanks.

I'm trying to install OpenSparc T1 Architecture and Performance Model. Does it need Solaris, or I can run it on linux as well. In the website it says it needs solaris.
When I try to follow the steps on the README file, it asks to download OpenSparcT1_SAM.tar.bz2, which does not exist anywhere. I thought this is just refering to the OpenSparcT1_Arch.1.5.tar.bz2 with different name. But no, it keeps refering to files that does not exists when I extracted the .tar file. Like OpenSPARCT1_SAM.cshrc
When I try to follow the steps on README.sam file, I cannot find the files refered to this document like setup_sam.sh

Can HFM be installed on linux?

as install guidance, HFM 11.1.1 need IIS. does that means HFM only suport Windows?

yes, there is no part of HFM that can be installed on any variant of Unix, including Linux.
HFM is a Windows only technology. The application server is written in C++ for Windows only, and the web interface uses Microsoft ASP (and ASP.NET for the Smartview provider).

Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform?

Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank

9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM

Installing Light Weight Designer for ODI 10.1.3.4 on Linux

Experts
We have installed ODI 10.1.3.4 on Linux and we want the ODI Light Weight Designer setup part of it. We have deployed the application in a OC4J instance and updated the repository.xml , web.xml and snps_login_work.xml with the right JDBC datasource & work repostiroy details
On launching http://<hostname>:7777/oracledilwd and trying to login with SUPERVISOR/SUNOPSIS we see below warning and we are unable to login further
java:comp/env/jdbc/ORACLE_MASTER not found in Oracle Data Integrator LightWeight Designer
Further in the opmn logs below error is seen:
javax.naming.NameNotFoundException: java:comp/env/jdbc/ORACLE_MASTER not found in Oracle Data Integrator LightWeight Designer
Please let help us here !
Shankar

Try to modify the data source definitio to remove the leading java:comp/env - this may resolve the issue.
I kniow, that makes it non-standard JNDI, but sometimes, that's what has been implemented.

Can anyone tell me how to update my bios in my Acer aspire 5610Z laptop. I installed Ubuntu Linux

I installed Ubuntu Linux in my Acer Aspire 5610Z laptop and all was fine until the latest updates came in. I inquired about the problem and I was told that I needed the newer version of bios. My laptop uses Pheonix WinPhlash bios and I cannot make it work through Ubuntu. Iwould appreciate any help that anyone might be able to give me. The keyboard does not work correctly and the person at Ubuntu assured me that it was the bios causing the problem. My laptop originally came with a Windows Vista installation disk. Thanks in advance.Rich S.

I had no problems with Ubuntu version 13. I started having problems with my keyboard after it upgraded to 14.04. I filed a bug / problem report with Ubuntu and I was told it was my out dated bios version 3.50. I went through hell trying to update it to bios version 3.60 but after many frustrating hours I finally ended up puting in Windows 2000 and updating WinPhlash through it. I had wiped my hard drive, reformatted it and it would no longer install Windows Vista. I can't figure that one out at all? After going through about two weeks of failure I finally got bios 3.60 installed. It did not change anything. The keyboard of the laptop worked just fine with Windows. When I put Ubuntu back it I had the same old ball game. I have to use a USB keyboard. I installed Ubuntu 15.04 (advice from my learned son) that produce no change either. Now, I had been going on the asumption that the fellow from Ubuntu knew what he was talking about since he assured me that it was a "buggy bios" version 3.50 causing the keyboard problem. I did a Google search only to find out that laptop keyboard problems are a very common thing with almost all versions of Ubuntu, especially version 14.04. I was told there is a Kernel 4.1 that may solve the problem but I do not understand Kernels very well and I fear I may mess things up and will have to start all over a again. I shall find out.

Can I install Arch Linux without Internet connection ?

It sounds noobish but my friends like to know if they can install Arch Linux without Internet connection ?

mcmillan wrote:
The core iso should be all you need, just boot off that to start the installation. It's been a while since I did an install, but somewhere along the way it gives you an option to install off the cd or do a net install. You just need to choose the cd installation.
That being said, all you'll have without internet will be what's on the cd, so you'll be left with a pretty minimal install. If you want to update and install additional software then you'll either need to get the computer temporarily connected, or download the packages on a different computer and transfer them.
I am looking to do something similar. I have the core system installed on an older laptop, but I cannot get the wireless working (it has no ethernet). I've tried downloading the libgl packagesfrom a mirror to a thumbdrive, but it's a dependency nightmare. Is there a better way to do this?

Why can't re-install the Oracle 9i AS in the last intalled LINUX ??

In my host , it is redhat 8 OS . In the last time , it has be installed the oracle 9i AS in the /opt/oracle/product/9.0.2 and I use the oracle-installer program to un-install pre-installing AS. Now , I want to re-install the AS to other $ORACLE_HOME directory , but the process of installing put the error message of following and I can’t re-install the AS:Install has detected an invalid Active EMD Home. Configured as /opt/oracle/product/9.0.2Passsible cause for this error may be a previous installaiton of oracle9i AS that ……I has deleted the /opt/oracle/product/9.0.2/* and /etc/ora* file , why has prompt the error message?Plesase get me a help for re-install the Oracle 9i AS. Very thinks for answer my question !!

remove /etc/emtab

Can`t Reboot after Oracle Linux Rel.6 Installed

Previously the Desktop PC had WINDOWS 7 and Debian Linux installed with GRUB controlling the dual boot between Debian and Windows 7. It worked fine.. no problems. Decided to go with Oracle Linux as I will be installing some Oracle products on this PC.
Installed Oracle Linux over Debian. The Oracle Linux install completed successfully and requested a reboot. On reboot the process stops on the GRUB step showing...
GRUB Loading.
Welecome to GRUB!
error: file not found.
Entering rescue mode...
grub_rescue
Seems to be missing a file on the Linux side to initiate the dual boot sequence.
1. Does Oracle Linux have GRUB available for dual boots.
2. If not, then is there some tool available to control dual boots with Oracle Linux and Windows 7.

Reran the entire Oracle Linux install and ensured the boot loader was put in the Master Boot Record. I selected 'Change Device' to confirm the Master Boot Record option was highlighted.
Here are my partitions on disk 'sdb' :
Disk
Device Size (MB) Mount Point Type
sdb
sdb1 2000 / ext4
sdb2 8000 swap
sdb3 180780 ext3
Rebooted system when the Oracle Iinux install finished - successfully... but once again encountered the following:
GRUB Loading.
Welecome to GRUB!
error: no such device: 121d0490-81aa-4f10-a2fa-17ca257b27f4
Entering rescue mode...
grub_rescue
Followed your instructions to fix the problem, and at the shell prompt # entered these commands :
chroot /dev/sysimage
grup-install /dev/sdb
Message returned:
Installation finished. No errors encountered
This is the contents of the device map /boot/grub/device.map
# This device map was generated by anaconda
(hd0) /dev/sdb
Rebooted system... same GRUB error message was displayed.
What am I missing? Never had this problem with Debian !

How to install redhat linux on my macbook pro marvericks osx as a dual boot

how to install redhat linux on my mac as a dual boot

I can use disk0s4 to install linux. I have already partitioned it for the vmware.

OBIEE 11g installing in Linux. domain creation error

Hi,
OBIEE 11g installing in Linux server now. domain creation is in progress for about an hour and in log I can see below error.
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
domain creation is still running and looks like it is struck to start domain no idea how to solve the issue. waiting to see whether domain creation successful.
Please let me know how to fix this issue.
Thanks
Jay.

Hi,
Have you try to increase MaxPermSize, it may occure memory issue.
change the Middleware/ORACLE_BI1/oui/oraparam.ini and fine it like below
JRE_MEMORY_OPTIONS=" -mx512m -XX:MaxPermSize=512m" then try to change it
JRE_MEMORY_OPTIONS=" -mx2048m -XX:MaxPermSize=2048m"
(i.e:It will increase the numbers for allocating more memory) then save it and then try to run config.bat (software only/enterprise) method and configure it.
Thanks
Deva

Odbc driver error while OBIEE instal on LINUX tries to access Datawarehouse

Hi All,
I have installed OBI Apps on a LINUX machine.The ETL too ran successfully.As we can't install BI tool on LINUX I modified the OracleBIAnalyticsApps.rpd file on a Windows machine and copied it back to the LINUX machine.After modifying the NSQConfig.ini file I could see all the OBI Apps answers and Dashboards ie OBI Apps was installed on LINUX.But whwnever I try to access some data from OLAP i get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
SQL Issued: SELECT Time."Year" FROM "Human Resources - Workforce Profile" ORDER BY 1
Probably this is because all the DSN specified in the rpd file were present on the Windows machine.I don't know how to modify these values for LINUX.Please help.Nothing is mentioned in the install docc as far as LINUX installation is concerned.
regards,
Soumya.

I think when your BI Server is running on linux, you would use native drivers to connect to your data warehouse database and not ODBC. If your data warehouse is on a oracle db server, change the call interfact in the RPD connection pool to OCI and give the tnsname for the db server connection in the connection pool.

Can OSX be installed onto a PC?

Sorry, kind of long.... but expresses what I'm looking for, trying to do, and why.
I need a new computer. We used to have two, and then one caught fire (watercooled, developed leak, coolant dripped onto electronics...). Now we have one remaining computer to share. I have options: I can build one from scratch and select my OS of choice (Win8, Linux, Apple), or I can buy a computer from the store and go with either Win8 or Apple, or buy one from the store and wipe it's hard drive and install my OS of choice. Here's the problem.... Macs are insanely expensive and well out of my price range at $1,000+ (even the Mac Mini, with decent performance options plus the needed soft/hardware to get started), Linux requires a lot of user involvement to make it work with everything, and I absolutely despise Microsoft's new Windows 8 abortion.
So here's my main question: can I install OSX onto a PC? Regardless of whether I build it from scratch or buy a ready-made computer from the store and wipe it's hard drive free of Win8?
Secondary questions, assuming "yes" to my first: I looked up the OSX software here on Apple's website, and it's like $26 or something, far cheaper than any Windows offering (even at their upgrade price). Is this a full version of OSX, or an update that just tweaks your current version to bring it up to speed with new stuff? If it's an upgrade, can you buy a full version? Or if it is a full version, can it be installed by a common user onto a fresh hard drive without having to be an Apple employee with special passcodes, permissions, etc, or without having to send it off to Apple so they can install it for you? And will it work with PC components? I've read of people taking Macs, removing OSX, and installing Windows onto it, so theoretically the two OS's don't have problems recognizing and using each other's individual components which means nothing's proprietary....right?
Thanks for any help you guys can provide! I really don't want to be forced to use Windows 8, fuss with Linux, or take out a second mortgage on my house just to afford a Mac. I'm trying to find a compromise of affordability, internal hardware upgradability (which Apple doesn't let you do), and user friendliness (I can deal with Linux if needed, but would rather have something that just works).

Awww, ****. Oh well, it was worth a shot. Thanks for the quick replies guys. I guess I need to go back to looking into Linux..... Linux is a bit of a hassle (trade-off for being free?), but I refuse to have anything more to do with Microsoft now that they have ruined Windows to complete and utter uselessness. It's a kids toy now, not a useful work program for adults. Vista and Win7 were bad enough (although still usefull), but Win8 is a joke. *sigh*
Thank you all, you were very helpful. :-)

Installed Debian Linux over my entire hdd. how to reinstall os x?

I installed Debian linux for ppc over my entire system using a usb drive. OS x is gone. How do I get it back? My internal optical drive doesn't work. I put the Tiger install cd that came with the computer into my second computer macbook in target mode. The linux system could read the disc, but I can't figure out how to boot from it. Any ideas? This will likely take some Linux know-how. The linux guys at the forum weren't any help. I think they were a little bitter that I wanted to switch back.

Fixed it. I just removed the internal hard drive disk and restored my Superduper disk image back onto my drive.

How to install in linux Enterprise Edition 6.0

How to install in linux Enterprise Edition 6.0

Hi Dipendra,
For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT user id creation and roles assignment and RFC destination creation etc..
Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
You can start by read the note 736902 to get the credentials for the ADS.
Hope this answers your question.
Thanks,
Greetson

ODI - Can it be installed on Linux 5?

Similar Messages

Maybe you are looking for