ODI - cannot be installed in Windows 2008 SP2

I downloaded the new hyperion 11.1.2 include the ODI, and then I extracted the ODI files and I run the setup, but nothing happen? should I extract the files in the same folder as the other hyperion extracted files?

This forum is for issues with the SQL Developer tool... do you have one?
Regards,
K.

Similar Messages

Install ODI 10g on 64 bit Windows 2008 server

Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
Edited by: user1137989 on Oct 27, 2010 10:51 PM

If you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
11g comes in 32 and 64 bit version .
32 bit version is
Oracle Data Integrator 11g (11.1.1.3.0)
for Microsoft Windows (x86)
64 bit version is .
Oracle Data Integrator Companion 11g (11.1.1.3.0)
for All Platforms
Hope this helps .

Add additional IP to Windows 2008 SP2 Cluster

Dears,
I have a 2 node SQL 2008 Cluster 64bit (non r2) on Windows 2008 SP2 64bit (non r2) Server.
I need to add additional IP (different subnet) to the Cluster Quorum Resource.
Kindly guide me the steps to add the IP ?
Thanks
Tariq

HI Tim,
Well we need more than one IP address on the Cluster (Quorum) for our replication to work as for some reason we cannot use the production IP which is currently configured for this Cluster.
Further if you are doing multi-site cluster with different subnet then you may need two IP with different subnet on the cluster (not for services or application)
I found this usefull command and it worked on the win 2008 sp2 (non r2) server:
C:\>cluster . res "FS IP Address" /create /group:"file server" /type:"IP Address" /priv address=192.168.1.106 subnetmask=255.255.255.0
For win 2008 r2 servers there is powershell command through which we can achieve the same.. :)
it took me hard time to figure out that "failoverclusters" module will not work for win2008 SP2 server.. !!
Thanks

Oracle 10205 on Windows 2008 SP2 certified?

I was able to install 10205 on Windows 2008 R2 using their special instructions, but can't seem to find Oracle statement that it can be installed on Windows 2008 SP1/SP2?

Hi,
Yes. The 10.2.0.5 patchset is not specific to a Windows version (it's a general rule for the patches/patchsets under Windows). The only distinction is 32 bits / 64 bits in this case.
There was a particularity for the base release to be used for Windows 2008 but you noticed it.
Best regards
Phil

Problems using SQL Server 2014 upgrade advisor on a windows 2008 sp2 server

I got sql server 2014 upgrade advisor up and running on a windows 2012 vm and every thing works fine, but I am having trouble installing it locally for a SSRS Box. The SSRS box is running windows 2008 sp2 enterprise edition, but when I try
and run the SQLUA.msi install nothing happens.
anyone else experience this issue?

Hi jesse,
Welcome to the forum :-)
Can you please clarify your issue in more details. I did not understand what you are doing. What do you mean by "installing it locally for a SSRS Box". Do you mean that you are trying a simple installation which do not work, and raise an error?
If so then (1) we dont need the extra information about "why you need the SQL Server" :-) we just need to help you install it regardless the SSRS. (2) We do need the full error log and the error message that you get.
By the way, The SQLUA.msi is just a small utilities named "Upgrade Advisor"
http://msdn.microsoft.com/en-us/library/ms144256.aspx
Do you want to install the SQL Server itself?
What is your current SQL Server on the local windows 2008 server?
[Personal Site] [Blog] [Facebook]

Upgrade ASM Oracle 10.2.0.4.0 to ASM Oracle 11G R2 on Windows 2008 SP2

Please advice on procedure or where I can find information on upgrading ASM from Oracle 10G to Oracle 11G R2 (Winwdows 2008 SP2 64bit environment) for mutiple Oracle instances (not a RAC environrment).
The current scenario is as follow:
- Two oracle homes; one for ASM instance and another for the Oracle Databases (in current case only two oracle instances possiblly more at a later time). Both (ASM and Oracle databases) have the same version of Oracle 10.2.4.0.
The Oracle database home can't be upgraded due to application restricition (Vendor Application not tested on Oracle 11G) but will like to upgrade the ASM instance to Oracle 11G (Oraclle 11G R2).
Questions:
- Is is a feasable solution? Can I upgrade ASM instance to Oracle 11G R2 to take advantage of new features? Will the ASM upgrade scenario is compatible with the Oracle Database Instance running Oracle 10G? Any possible issues that I should be aware or concerns?
Is it possible to have ASM running in Oracle 11G R2 and service the need of Oracle database instance running in 10G?
Please advice or where I can obtained information on the matter. Also possibly if someone has done it on Windows 2008 SP2 (not Windows 2008R2).
Thanks in advance

Thanks so I can upgrade the ASM Home instance and leave the Oracle Databases home on Oracle 10.2.0.4.
I agree with you not just 100%, actually 120%. Fortunately, the vendor is finally understanding by pressure provided by DBAs and Application Teams that they are very behind the curve. It is working and by summer we should have an oracle 11G compatible product.
The same thought went when I was told of their compatability database level.
Regards
Albert

Jdeveloper 11g cannot be installed on Windows with Thai regional settings

I have no idea where to properly submit this issue. Hope I do not abuse this forum for too much.
Jdeveloper 11g cannot be installed on Windows with Thai regional settings configuration.
I've got "A fatal error has occurred. This application will terminate" error dialog, while installing.
I have to change my regional settings to English then install it and change my setting back later.
Regards

Sigh... This forum software doesn't even support image posting.
The error is every easy to reproduce.
1. On Windows XP, goto "Control Panel" -> "Regional and Language Options" -> "Standards and format"; and change that to "Thai"
2. Invoke "jdevstudio11110install.exe"
3. Always click "Next" until the error dialog appear.
<pre>
. Exit [x] .
. [!] A fatal error has occurred. This application will .
. terminate. .
. [[ OK ]] .
</pre>
From my experience, this always have something to do with the Buddhist Era year system (AD + 543).
Regards.

Dism command in windows 2008 SP2

Ho do I run the command
dism /online /cleanup-image /spsuperseded to clean up winsxs folder in windows 2008 SP2.I got message /online command works only in windows 2008 r2,and in windows 2008 sp2 it needs to be run in offline,can any one give idea how i run this command
in windows 2008 sp2

Hello,
Firstly, please keep in mind that WinSXS folder is an important directory that keeps the shadow copy of the important system files, which gets changed during any installation of Patches or Updates or software. With the use of WinSXS Folder all system files
can be reverted back to the stage where it was before installation of Patch/Update. Hence, it’s not wise to wipe the WinSxS folder.
Secondly, just like the warning message suggested, DISM can only be used in Windows 7 and Windows Server 2008 R2 (Not in Windows Vista or in Windows Server 2008). For Windows Server 2008 SP2 or Windows Vista SP2, there is tool called Windows Component Clean
Tool (COMPCLN.EXE).
Refer to: Windows Component Clean Tool
http://technet.microsoft.com/en-us/library/dd351467(v=WS.10).aspx#BKMK_COMPCLN
•Windows Vista or Windows Server 2008 Service Pack 1: VSP1CLN.EXE
•Windows Vista or Windows Server 2008 Service Pack 2: Compcln.exe
•Windows 7 or Windows Server 2008 R2 Service Pack 1: DISM /online /Cleanup-Image /SpSuperseded or Disk Cleanup Wizard (cleanmgr.exe)
Thanks
Zhang

BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
Thanks

We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

VC Redist 2013 cannot be installed on Windows Server 2008 Core

Both vcredist_x86.exe and vcredist_x64.exe have this problem. And it can be reproduced 100%.
But all of them can be installed on Windows Server 2008 R2 Core, Windows Server 2012 Core, and Windows Server 2012 R2 Core.
From the log, it seems the installer depends some UI DLLs that are not included in this OS.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
Is it a bug or by design?
The following is the failed log:
[060C:0608][2015-04-15T02:18:41]i001: Burn v3.7.2829.0, Windows v6.0 (Build 6002: Service Pack 2), path: c:\vcredist_x86.exe, cmdline: '-burn.unelevated BurnPipe.{51C9AFD1-AA72-4BA2-8B12-E93691AFD7E3} {1B953492-AB47-43FA-A2BF-E1505C76194D} 3908'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleOriginalSource' to value 'c:\vcredist_x86.exe'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501'
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
[060C:0608][2015-04-15T02:18:41]i500: Shutting down, exit code: 0x4005
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleAction = 5
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleElevated = 1
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleInstalled = 0
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleLog = C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleManufacturer = Microsoft Corporation
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleName = Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleOriginalSource = c:\vcredist_x86.exe
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleProviderKey = {f65db027-aff3-4070-886a-0d87064aabb1}
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleTag =
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleVersion = 12.0.30501.0
[060C:0608][2015-04-15T02:18:41]i007: Exit code: 0x4005, restarting: No
Xiaojin

Hi Xiaojin,
Thanks for posting in MSDN.
I don't think this is a bug. From your description, you want to install VC redist on some servers core for Windows Server 2008, 2012. Based on my knowledge, server core has no graphical user interface (GUI), there is no desktop. Only code written using Windows
application programming interfaces (APIs) can run on Server Core.
More information about server core please refer to here:
What Is Server Core?
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Installer 4.5 Error while installing in windows 2008 32 bit

In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
message as " Not enough storage is available to process this commend".
If any one pls give some suggestions as soon as is appreciative.
[email protected]
thanks
Shahul Hameed

Hi,
The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
visit the following link for detailed information:
Misleading error message when you install an update package in Windows
Vista or in Windows Server 2008: "Not enough storage is available to process this command"
Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
Windows Installer 4.5
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

LMS 3.2 new install on Windows 2008

Hi,
I finished installing the eval version of LMS 3.2 on a new Windows 2008 server. I manually adjusted the Pagefile size and managed to get the services to start, as suggested elsewhere in this forum. I now manage to get the login screen, but once I enter the login credentials, IE responds with ' Internet Explorer cannot display the webpage '.
I get this from a client and from the server browser itself. Not sure where to go from here....
Thanks!

You may have been affected by: CSCtb17186 Redirection error thrown trying to login to LMS.
Try the following:
1. stop lms: net stop crmdmgtd
2.Run regedit.exe and add or modify the following registry key DWORDs:
HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Zones\0\1A10 : DWORD : 0
HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Zones\1\1A10 : DWORD : 0
HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Zones\2\1A10 : DWORD : 1
HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Zones\3\1A10 : DWORD : 1
HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Zones\4\1A10 : DWORD : 3
3. Restart LMS : net start crmdmgtd.
If those steps dont help here is how to regenerate the SSL certs and disable SSL if you like:
1. Stop services: net stop crmdmgtd
2. Go to the directory NMSROOT\MDC\Apache\conf\ssl and delete the four files that start with server.*
3. Now regenerate the certificate, first run the commands:
Go to NMSROOT\bin\:
perl.exe NMSROOT\MDC\Apache\ConfigSSL.pl -disable
perl.exe NMSROOT\MDC\Apache\ConfigSSL.pl -enable
(If you want to use https for login, then leave it at this. If you want to use http, then run the ConfigSSL.pl -disable command again)
4. Start services: net start crmdmgtd

"BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2

I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there is anything going on. There are no errors in the main logs, but after digging a little I did find these errors in the SAPSDIC.log file.
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_CHAR_COND~0'.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: BADI_FILTER created
(DB) INFO: BADI_FILTER~0 created
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_FILTER~0'. Ca>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: BADI_IMPL created
(DB) INFO: BADI_IMPL~0 created
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_IMPL~0'. Cann>
(IMP) ERROR: EndFastload: rc = 2
Anyone have any ideas as to what might be going on? I can't find anyone with this exact same error. And this is our first attempt at installing a system with Windows 2008 R2 and SQL Server 2008 R2. All of our other Windows SAP systems are on Windows 2003 and SQL Server 2005 and we're in the process of upgrading - this being the first system.
Thanks in advance,
Michael

Set BCP_LOB=1 in your system environment
Note 1156361 - R3load: Fastload doesn't support LOB-columns
Markus

11gR2 RAC install on Windows 2008 R2

I am installing three node rac on windows 2008 and I am successfully able to install Grid Infrastructure with ASM as soon I complete this install server1 disconnect me from remote console and I got blue screen error when I log in back and same error appears on server 3 after few minutes. I bounce all there machines and continue database creation part same problem appears again Need help to understand the problem.
Do we need to set some kind of registery settings, or any parameter etc.
Server Configurations.
All three servers have same configurations.
Server 1 ,2 ,3
OS : windows 2008 R2 64 bit
Processor: Intel(R) xeon(R) CPU E5540 @2.53GHZ (2 processors)
Memory: 32G
SAN storage :netapp san
Error Message:
Problem signature:
Problem Event Name:     BlueScreen
OS Version:     6.1.7600.2.0.0.274.10
Locale ID:     18441
Additional information about the problem:
BCCode:     fffe
BCP1:     0000000000000000
BCP2:     0000000000000000
BCP3:     0000000000000000
BCP4:     0000000000000000
OS Version:     6_1_7600
Service Pack:     0_0
Product:     274_3
Files that help describe the problem:
C:\Windows\Minidump\063010-13868-01.dmp
C:\Users\svc-btmoraadmin\AppData\Local\Temp\WER-773546-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

In the first place a 'blue screen' has to be analyzed on the OS side, Oracle COULD be the reason, but who knows? More likely a hardware problem (RAM,disk storage). So you have to ask your system administrator and/or call Microsoft support. Or you try to find an answer in one of the many articles in the web, for example this:
http://www.maximumpc.com/article/features/blue_screen_survival_guide
Werner

Smart View 11.1.1.3.500 Install on Windows 2008 R2 64 Bit SP1

Wanted to check if any one form user community was able to install Samrtview 11.1.1.3.5 on Windows 2008 R2 64 bit SP1
Think support matrix says its compatible with windows 2008 64 bit but not R2 - Any round about solutions to get his installed on R2 would help.

I have tried in Server 2008 R2, i did not face any issues, again i did not use that extensively

ODI - cannot be installed in Windows 2008 SP2

Similar Messages

Maybe you are looking for