ODI: remote monitoring and control of execution

Hi. I'm interested in is there any way to monitor execution of packages, interfaces with some web interface ot something else?
(maybe something like in OWB web interface)
Thanks in advance.

Hi Vovanenok,
Yes that is possible. You can use Metadata Navigator component of ODI to monitor your execution from remote.
Please check the ODI Setup document for deploying/installing MN.
Thanks,
G

Similar Messages

How to create remote monitor and control webpages using cFP2220

Hi all,
I'm fresh user using compact field point. I would like to make cfp2220 as a web server, so other PCs can using IE to monitor and control through web browser.
Moreover, does the webpages support security? and how to setup?
Thanks,
Regards,
Robert

Hi Robert,
You can use LabVIEW Web Services to set up a system like you describe, and there is also information available on how to secure your Web services.
I hope this is helpful.
Regards,
Stephen S.
National Instruments
Applications Engineering

Would like to monitor and control a labview application with a hand held device.

Would like to monitor and control a labview application with a hand held device.
Would like to use a palm or ipac on a local area network or communicate directly with the PC running windows.

LabVIEW doesn't run on a hand held device. But, check out these documents:
Is it Possible to Use Remote Front Panels to Control a LabVIEW VI Remotely Using my PDA?
"What OS is recommended for LabVIEW to run on a PDA?"

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.
We have 10 Client Nodes in the field and we need two "View Only" functionality in Client machines located on Supervisory Desks.

I have done this. There are many ways to approach this but I will offer what I think is the easiest. This will work ONLY if you have been assigning security levels to your objects (objects that actually control devices in the field) greater than zero AND allowing a security level of zero to view all panels. When I develop interfaces I do this just for creating a non control client.
Basically, you remove all users from the Lookout client in the user manager. You will not be able to remove the built-ins, "Guest" and "Administrator". Now when the end users tries to login using his normal login he will be denied. Consequently, he will not be able to control. But, he will still be able to view all the information since a no login can view a panel with a viewing se
curity level of zero. You must ensure any pushbuttons that are used to open panels have a security level of zero.
Now you can copy this security profile by finding the lookout.sec file and copying it to another non-control client computer. In Windows NT this file is located in the system32 directory.
There are many other ways but I find this the easiest.
Regards,
Tommy Scharmann

Home Monitoring and Control with a third party also monitoring and controlling?

I was wondering if anyone has tried to install Home Monitoring and Control with a third party monitoring, and or controlling the same devices. I know many systems offer multiple control points such as auxilary control touch screens. Has anyone made this work? I have Z wave devices on my home security system (lighting), and would also like to monitor them via Verizon. Possibly also adding some energy monitoring and control, that is not available via my security company. My security monitoring company provide support through Alarm.com, but has limited energy monitoring to thermostat control and such.
The only interactive control with my security company is for alarm monitoring and control, with limited lighting control. All of my devices are GE in the wall mounted lighting controls, and I would prefer to pay Verizon the few extra dollars for the additional features VIA the web, rather than pay Verizon. There used to be an energy package, that included the main power panel load and I thing Thermostat, but I believe some of the bundles have been split up.
There are other options out there now, but I have neen exploring. My GE Switches are from the Lowes Iris system. Much less expensive, and can replace existing wall switches, not like the power cord switches. Plus the store is four miles from my house.

I started with Verizon home monitoring, but if you read through the threads the service is extremely unreliable, still to this day. I am stillusing it, although I am waiting for a refund on the services that I have used since it is so bad but I bought a MiCasaVerde Vera3 system. You pay appoximately $300 for the unit and there is no monthly charge and you get all the features plus pretty much unlimited types of z wave devices to use on it. I would seriously consider using that before Verizon.

Database monitoring and control i

Hi all,
I am looking for various options to monitor and control the database.
Could you provide your thoughts on this.

You will get more, faster and better responses to your questions when you learn that your questions should contain as much information about your interests as you can provide.
What you asked about database monitoring is pretty close to posting only question mark in you post. Like this : *?*
When you are going to car mechanic to ask him for advice about your car, you will not just tell him : I am looking for thoughts on achiving higher HP for my car,tell me ,how to do that? .
You will obviusly tell him at least what car you have, what model, what year was made and so on. You can apply almost the same logic when asking oracle questions here.
For zilion reasons , providing at least information about database release you are using is a 'must do' when asking a question.
Also, your first stop when looking for info about something that is so general as your question here suggests, should be http://tahiti.oracle.com/ , where you could eventually, as in this case , after few more clicks lead yourself to this, and after that enable yourself to ask more specific and concrete question.
By the way, your forum activity statistics are saying that you are one of those posters which is appearing here with the moto 'ask question-respond never' , and this attitude can discourage many forum members to help you because they prefer two-way communication, which you obviusly don't.

Monitoring and controlling wifi activity by device.

Is there a relatively simple way to set up monitoring and controls per device on a Time Capsule-based wireless network? For example, I might want to limit wifi access late at night by my son's iPhone or my daughters e-reader. Or I might want to disallow internet access during certain periods for certain devices, while still allowing full access to the disk for backups via Time Machine. I would also like to see a how much and when individual devices are using the network. Is there an application out there for that sort of thing?

There are some access controls for the TC available.
Just open the airport utility, manual setup, airport, access control, and used timed access.
But that is all that is available.
To get download usage etc is well beyond what the TC can manage.. you will need a wireless router with 3rd party firmware, gargoyle. It will do exactly what you want. That is the only firmware or even software on the market that puts the control into a relatively cheap router.
http://www.gargoyle-router.com/download.php
You can get a TP-Link router for about $70 but the Netgear WNDR3700 at around $120 is a much better router for the job. This has far superior controls cf the apple routers.

Monitoring and controlling of Diesel Power Plant Using Labview

Respected Sir,
Our Project name is monitoring and controlling of Diesel Power Plant Using Labview7.1.Here we are monitoring and controlling important Diesel engine Parameters and elecrical parameters.Expecting more ideas andsupport from NI

it s very difficult to manage each and every generators manually in a diesel power plant.we have done an inplant training in a diesel power plant from where we got idea of automating the plant.in tat plant they are using SCADA software.To reduce the complicity of hardare an unnecessary comp languages v r planning to do the same purpose in LabVIEW software as our final year project.As this s our own idea v r not more familiar with the application areas of LabVIEW in a Diesel Power Plant.Plz suggest more advantages of LabView over SCADA in tis field and also welcome innovative ideas from NI to make project simple and more useful

Monitor and control CVI

Hi,
is it possible for labwindow 5.5 to create a panel or commandline that can monitor the login system of CVI when view it remotely?
for example, if i only allow the 1st person who login my page to control my front panel, for the 2nd person and others were only allowed to view the front panel without the permission to control the front panel.
so can labwindow create this kindof commandline?
thanks alot =)

Hello Kenshi,
Currently there is not way to prevent more than one user to have remote control over your application. LabVIEW allows one client to have control of the application, while other clients can view changes made by the client in control. On the other hand, remote front panel control was implemented in CVI to allow multiple clients to change front panel values at the same time.
Wendy L
LabWindows/CVI Developer Newsletter - ni.com/cvinews

Remote monitorng and control by using Labview 8.0

Hi,
I has tried to do the remote monitoring by using labview 8.0. Which I can monitor the VI's through the web browser via the internet. But my problem is when I type the URL link at the internet explorer the Vi's not appear. It just stated 0.00% downloding of 0 byte. I already wait for half an hour but nothing happen. Hope can get any feed back from you guys.
MF Hussin

Hi,
really it's just the visa resource name you're wanting to setup. Have a look at the following link :
http://digital.ni.com/public.nsf/allkb/80C28CC795611E4A86256AB100209521
other useful information can be found here :
http://digital.ni.com/public.nsf/allkb/0f90eca67a4eb1368625716c006b1f2e
and a bit more of a roadmap here :
http://digital.ni.com/public.nsf/allkb/92d475e7246846e786256ed700556d98
For more specific information, have a look at the results returned from ni.com searching for visa and tcp :
http://search.ni.com/nisearch/nisearchservlet?nistype=default&ddown=0&filter=%2Btaxonomy:top+%2B(met...
Hope that helps
Thanks
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer

MDT 2013 Remote Monitoring and LocationServer.xml

I recently set up MDT remote monitoring on our main deployment server and I've noticed some odd behavior. I have two shares on the server (one for deploying Server OSes and one
for deploying Client OSes). Oddly enough remote monitoring appears to pick up any server OS deployment just fine, but when I deploy a client OS it never picks it up. The only real difference between these two is the boot media. On the boot media for deploying
client OSes I'm using LocationServer.xml to allow my helpdesk team to select from a list of several deployment shames. Could this be the reason why it’s not working and (assuming it is) is there any way to fix it?

Check monitoring is enabled in the customsettings.ini of the client os share.

Apple Remote Desktop and controlling over VPN

Hi All,
I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
Thanks

Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

Remote Panel server monitoring and control by multiple users

Hi . . . ..
I just did what is in below attached image. . . . Now I have to control as well as monitor the VI file which is in server PC. But If I supposed to use below steps(please refer image), the clients can be control the VI seperately. But the status of each client cannot be monitored by server PC. I used another way that is "Non-reentrant" option... But its provide controlling by queue manner. . . . .
My question is, is there any possible to control the server VI at a time by all clients. . . .?
Please guide me for this... I am very much thankful about this. .. .. ..
Attachments:
image.png ‏23 KB

iPhoto has no Cross Platform ability whatever. It's designed with one user on one Mac in mind. It's not the app you want for your set up. Sorry but that's the way it is.

10g RAC remote monitoring and services question.

IF I plan to offer one of my clients remote Dba services for 10g RAC- Standard Edition....do you necessarily have to use ASM to do so or is that just the Oracle push and I can actually use other file systems like Linux ext3, etc?
And if I have to use ASM how hard should it be for my Dba's to train themselves on it?
any help is appreciated.

From metalink
Can I use OCFS with SE RAC?
It is not supported to use OCFS with Standard Edition RAC. All database files must use ASM (redo logs, recovery area, datafiles, control files etc). We recommend that the binaries and trace files (non-ASM supported files) to be replicated on all nodes. This is done automatically by install.
Modified: 01-SEP-04 Ref #: ID-5748
And it's easy to manage those files, I think your DBAs just reading the doc can do that.

Monitoring and controlling the Tag values of Logix 5000 using Labview while using RSLogix 5000 to program the PLC

Hi
I want to know how to change the input bits or tags of a PLC which is programmed using RSlogix 5000. But I need to use Labview to monitor the input bits ( like in Digitial Input bits) and then be able to change the BITS while the PLC runs and the PLC should be able to detect the change in input bits and act accordingly. The programming is done using ladder logic and its done in RSLogix 5000 and dumped into PLC using RSLogix.
Thanks in advance

msu,
Once you have the OPC server up and running the best way to communicate with is is through the Datalogging and Supervisory Control module for LabVIEW. The DSC module allows you to bind shared variables to items on your OPC server. Then you could just read from or write to these shared variables to access the data on this OPC server. If you don't want to get this module you could also just use datasocket to read/write from an OPC server. The URL you would use in data socket would look something like "opc://localhost/{your opc item's address}".
-Justin D

ODI: remote monitoring and control of execution

Similar Messages

Maybe you are looking for