ODI Requirement

Hi Guys and Gals
I have a UK based ODI role, 1-2 week start for initial 6 month contract – any takers?
Or if you know of someone who might be available.
You time is very much appreciated, as always.
Many thanks
Tark

Hi Tark,
can you send me an email about this?
My email is at my profile...
Thanks,
Cezar Santos
http://odiexperts.com

Similar Messages

  • Installing ODI 11 on a single server Hyperion 11.1.2.1 environment

    We have a single server Dev EPM (Hyp 11.1.2.1) environment (HP, HPCM, HFM, FDM), which is working over all fine. We now would like to use ODI for data and metadata loads. Our plan is to install ODI 11.1.1.6 on the same server where we have the above full EPM stack installed/Configured already. I did a quick study online before attempting ODI, below are the challenges I am facing.
    1. I believe ODI requires Weblogic, hence tried to extend or create a new weblogic domain with the already exsiting weblogic installation of EPM. However weblogic create/extend domain screen does not have ODI in the list of "supported products"?
    2. Do I need to install a fresh copy of weblogic to be able to install ODI or can I use the existing weblogic installation?
    Kindly share your thoughts and experiences in this regard.

    959658, Thanks for your comments.
    I tried it and it throws the below error/message
    INST-07247: Specified Middleware home location is either not valid or missing
      enter a valid Middleware home location
    I get this error only if I choose to install J2EE Components. I read some docs and understand that J2EE components are primarily used for HA and clustering, apart from this is there anything other major functionality that J2EE components provide? Just want to see what is it that we will miss if we choose to go without J2EE for now given it is a Dev environment.
    When you say you were able to proceed with existing installation of weblogic, did you extend or create a weblogic domain to support ODI? cause it looks like the existing EPM weblogic domain does not support ODI.
    Regards
    JamesO

  • Minimum requirement of ODI app deployment

    Hi,
    We have an ODI application in development environment with master repository, work repository, dataserver database source and target database, mapping and transformation rules and scenarios.It is working perfectly and we want to deploy it in production enivronment.We have following questions:
    1.What is the minimum requirement to deploy ODI application in production environment ?
    2.We need to install ODI in production environment as ODI whitepaper suggest.Do we need to import all repositories and scenarios from development environment respective export? Though scenarios are stored in the work repository.
    Thanks
    Brijendra

    Hi,
    Do you have more than one option:
    You can use production as context, it means, just create a production context (you can put a password on it) and then work at same repository that you are developing
    OR
    Create a new WORK repository (I recommend a execution one) where you will import the scenarios generated in the development and have the production totally separated from development.
    I believe that the necessary requirements are the same of development, take a look at the Installation Manual.
    Hope to have helped.

  • Seperate license required for ODI

    Hi,
    Whether seperate license is required to use ODI, if user is having a support contract with oracle for Hyperion Enterprise edition.....or can we use developer version of ODI 11g because only one Admin user is required.... I heard like 10.3 version of ODI is free for all the oracle partners.
    Thanks.....

    Hi,
    AFAIK, ODI is licensed to use with some Hyperion products such as Hyperion Planning. This means that the target must include Hyperion Planning. I think in your case, a separate license is required unless you're only doing development. However, you need to check with Oracle to be sure.
    Regards,
    Gerd

  • ODI installation guide and setup requirement for Linux 64 bit machine

    Hi,
    I need to install ODI on linux 64 bit machine.
    Kindly provide me the steps and the link to software that are required to be downloaded.
    Thanks.

    In OBIEE I have used weblogic server. localhost:7001/em is required to deploy repository.
    On my local machine I have installed ODI weblogic server. It is also taking localhost:7001/em to show the ODI-DOMAIN.
    If I install it for both ODI and OBIEE will I face any conflict issues.
    What should I do???
    Thanks.

  • Are there parts of ODI that require Oracle Enterprise Edition?

    We are looking to build a newer database server for our data warehouse, which we feed with Oracle Data Integrator  (EE 11.1.1.6), and are wondering if there is any reason not to look at Standard Edition Oracle?   But since we already have an ODI environment running against an EE Oracle (11.2.0.4), we'd like to avoid a circumstance where something in ODI wouldn't run anymore, after switching from an EE to an SE Oracle.

    Hi Mike ,
    Oracle EE is top end version compared to Oracle SE , there are some features/Options which are available with Oracle EE edition and not with SE edition.
    If ODI development makes use of Oracle EE features absent with Oracle SE , It may fail.
    Alternatively, you can identify them and tweak the code accordingly to ensure execution as required.
    Thanks
    Vinay

  • ODI suites to my requirement ??????

    Hi all,
    My requirement is i will have a root folder inside that root folder i will n number of sub folders.
    Client place different files inside each sub folder . The requirement is Can ODI pick up the files and based on the configuration from the DB will it route to distination
    folder dynamically.
    The detsination folder name should be read from config DB and it should route there.
    Thanks
    Phani

    This is possible. You need to create dynamic filename from the DB and pass that as a parameter to the Filename.
    http://blogs.oracle.com/dataintegration/2009/04/using_parameters_in_odi_the_dy_1.html

  • Parallel Processing in ODI with Unique Requirement

    Hi All,
    I have a unique requirement. I have a scenerio which i have to run multiple times in parallel with different user inputs.
    Eg Suppose user inputs A,B,C then i have to run the same scenerio 3 times with input filter as A B and C respectively in parallel.
    If user inputs A,B,C, and D then i have to run the same scenerio 4 times with inputs A B C and D in parallel.
    Does any one know a way to achieve this.
    Thanks in advance for your suggestions...
    Regards
    Edited by: 872116 on Jul 12, 2011 11:32 PM

    Hi,
    Take at look at the following 2 articles. Using the concepts outlined in them you should be able to achieve what you are trying to do.
    http://odiexperts.com/interface-parallel-execution-a-new-solution
    http://odiexperts.com/processing-multiple-interface-through-single-package

  • ODI - Confusion Continues.! Details About Connectivity Required

    Hi ,
    I clearly Explain my Queries in ODI ............( to be frank I got confused now ...... )
    1.I have my ODI installed.
    2. Source : Oracle ( different Server present in a diff Location).
    Target : Oracle which I have in my same server where ODI is installed.
    3. I have created 2 schemas for Master and Work Repository in my Target Oracle DB.
    4. Then I created an Master Repository.
    In this Step whether I need to give the Username and Password as
    My schema name and password which I have created for my Master Repository or Should I need to give User name and password of my Database.
    While creating the Work repository whether I need to give Schema user name and Password or Database User name and password......
    Because When I was trying it was showing successful connection for both.........KINDLY CLARIFY.
    5. Then In Topology after successful creation of master and work repo..........
    While defining.....
    While mentioning the Database connections (Master Repository)
    Which User name password I need to give...........
    Is it ....Schema User and Password of the Master Repository or Database(source) user and password......
    6. And For Designer when we r first creating ........
    Which User name password we need to give...........
    Is it ....Schema User and Password of the Master Repository......
    7.Regarding Dataserver Creations
    I tried creating a Dataserver in Oracle Technology .....In the Definition Tab it has username and Password....
    Which User and Password I shud give...?
    Whether I shud give Source schema user name and password......orelse just the source Database user and password....
    8. Physical Schema for the Dataserve..........
    In the Definition Tab it has...
    Schema(Schema) : In this whether I shud give Schema name of my Master Repository.
    Schema(work) : Whether I need to give Work repo schema Name.
    9. ODIPARAMS FILE CONFIGURATION:
    set ODI_SECU_DRIVER=? ( Driver Name of the Master Repository)
    set ODI_SECU_URL=? ( URL of the Master Repo)
    set ODI_SECU_USER=sa ( What shud I need to give )....Master Schema User Name:
    set ODI_SECU_ENCODED_PASS=
    set ODI_SECU_WORK_REP=? ( Is it work repo Name)
    set ODI_USER=SUPERVISOR
    set ODI_ENCODED_PASS=LELKIELGLJMDLKMGHEHJDBGBGFDGGH
    10. Can I use Local Agent to run all my interfaces........always ....during data migration is it rite ..........
    First Exp in installing and configuring ...............Thats why these many questions I got
    Kindly anyone clarify ............................
    Thanks
    AK

    Hi Cezar,
    Thanks Cezar....for ur comments
    I am jus Explaining:
    If run thru an Local agent ......it does not take any details from ODIPARAM file correct.......
    It jus runs like a DEMO......
    So whenever I want to run a Package or Interface........I shud Launch my agent then run thru that agent .........
    For this case ........I need to mention all the Parameter in ODI PARAMS file
    Am I correct ..............
    Thanks
    AK

  • Odi file jdbc driver for HDFS files required

    In ODI what is the driver to be used in the file technology for HDFS files. i have used the genereic file jdbc driver which is not accepted by ODI.
    thanks
    Pradeep

    Hi,
    This Forum is related to creator.Please post this on a appropriate forum
    Regards
    Ct

  • Explanation required for odi ref functions

    hi,
    i am not able to understand this below code:
    <%=odiRef.getTargetTable("SCHEMA")%>.AR_SEQ.NEXTVAL
    please give your valuable explanation

    Hi
    odiRef.getTargetTable("SCHEMA") going to give you target schema name
    then you will get SCHEMANAME.YOURSEQUNECE.NEXTVAL
    Thanks

  • Unable to install odi on windows 7 64 bit

    I am trying to install odi after installing the RCU on a compatible db.
    The odi i downloaded from is http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
    the setup starts in command line initially and passes monitor and min CPU requirements and then shows please wait for some time and then finally quits without showing any error etc,
    Please advise

    ok now while using it on launcihing the installer wizard if i use system as username and role as normal it let me go ahead but when i chose odi schema and do next it fails with following error:
    2013-01-16 15:11:36.610 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: Connecting to database: user:system, role:Normal, connectString:(description=(address=(host=slc03lod.us.oracle.com)(protocol=tcp)(port=1522))(connect_data=(service_name=SLC03LOD)(server=dedicated)))
    2013-01-16 15:11:48.233 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate to be visible
    2013-01-16 15:11:48.244 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate to be visible
    2013-01-16 15:11:48.266 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: Executing Task: Master and Work Repository
    2013-01-16 15:11:48.266 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = ODI
    2013-01-16 15:11:48.266 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Starting component prereq check
    2013-01-16 15:11:48.287 ERROR rcu: oracle.sysman.assistants.rcu.backend.task.PrereqTask::execute: Prereq Evaluation Failed
    oracle.sysman.assistants.rcu.backend.validation.PrereqException: RCU-6083:Failed - Check prerequisites requirement for selected component:ODI
    Please refer to RCU log at D:\softwares\office\rcuHome\rcu\log\logdir.2013-01-16_14-17\rcu.log for details.
         at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:658)
         at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)
         at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
         at java.lang.Thread.run(Thread.java:662)
    2013-01-16 15:11:48.288 ERROR rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: RCU Operation Failed
    oracle.sysman.assistants.common.task.TaskExecutionException: RCU-6083:Failed - Check prerequisites requirement for selected component:ODI
    Please refer to RCU log at D:\softwares\office\rcuHome\rcu\log\logdir.2013-01-16_14-17\rcu.log for details.
    User should have sysdba privileges
         at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
         at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
         at java.lang.Thread.run(Thread.java:662)
    If i try to connect system with role sysdba then it says invalid username/pwd however i am able to connect the system as sysdba from sqlplus

  • Unable to configure ODBC data source through odi

    Hi,
    Let me explain the architecture first.
    We have three machines
    1. OpenVMS machine on which connx server is running for RMS files, say SRC
    2. Windows machine on which ODI Data Studio 11.1.1, Say WRKSTN, This has connx client installed
    3. Target is HP-UX on which SYBASE is running, say TRGT. On target we have installed connx client and ODI Stand alone agent and agnt01 is the name of the agent that is running
    My Requirement is,
    I need to pull the data from SRC and load it into TRGT using the ODI  agent agnt01, through ODBC data connectivity.
    If i configure DSN on my WRKSTN they the agnt01 is unable to identify. If i configure a DSN on HP-UX machine then i am not able to specify that in ODI Sun odbc: Jdbc bridge driver.
    Kindly help me as to how i can resolve this
    Thanks,
    Rajesh H

    Configuring DSN on windows workstation would not help as the agent is not running on that machine. The DSN has to be configured on the machine where the agent is running on which you want to execute the flow. What error are you getting on trying to specify the DSN name on HPUX in the data server jdbc url?

  • How to do this in ODI

    HI Friends,
    I m installing ODI.I am using ODI 11 and Oracle 11g version.
    And we have One Master repository for Dev and UAT, mainly because we have one physical server for UAT connecting to UAT DB and Dev DB. And a separate Master repository for Production.
    So i have few inputs needed from your side:
    •Need to check Web agent and ODI Console configuration
    •Need to check Topology configuration, physical, logical and contexts.
    •Setting up projects
    •Security implementation
    •Versioning and Solution management
    For all these above point i need How to do this any step by step guide andd how much time it will take .
    Thanks,
    Lony

    lony wrote:
    HI Friends,
    I m installing ODI.I am using ODI 11 and Oracle 11g version.
    And we have One Master repository for Dev and UAT, mainly because we have one physical server for UAT connecting to UAT DB and Dev DB. And a separate Master repository for Production.
    So i have few inputs needed from your side:
    •Need to check Web agent and ODI Console configuration It will take maximum 3 hour if everything goes well.
    •Need to check Topology configuration, physical, logical and contexts. Depends on how projects you have and what are the connection details. Still it will take two hour for setup with analysis.
    •Setting up projects Depends on requirement.
    •Security implementationThis may take more than 4 hours to set the profile properly for each resource.
    •Versioning and Solution managementShould not be more than 2 hours for one project
    > For all these above point i need How to do this any step by step guide andd how much time it will take .
    I gave input for initial setup if everything is ready. But it depends on your architect as well.
    Thanks,
    Lony

  • ODI - SCD Type 2 - Insert new row error

    Hi All,
    For Dimension I have a surrogate key, a natural key, and a column with "overwrite on change", start_date, end_date, current_record_ind. When I run the interface with the default SCD Type 2 for SQl server, this runs fine. But when I change that one column from "overwrite on change" to "insert new row", it fails on the update step. What should I be looking for anf fixing.
    Thanks for your time and help.

    DB: SQL Server 2008.
    IKM = IKM MSSQL Slowly Changing Dimension
    Error Message: ODI-1228 - Incorrect syntax near the keyword from.
    Code: update T
    set
    from database.dbo.Dim_type as T,
    database.dbo.I$_Dim_type as S
    where T.Cd = S.Cd
    and T.Current_rec_ind = 1
    and IND_UPDATE = 'U'
    To overcome the issue, I have commented the update code in the Knowledge module and the insert works, but for this one it is ok, but I have requirements where one column needs to be overwritten and other column changes will require to add a new record. How to handle both?
    Thanks for your time.

Maybe you are looking for