ODI Scheduling Not Running

Hi,
We recently updated to ODI 10.1.3.6.0. The Scenarios are not running at their scheduled times. They only run when manually executed. Old schedules work fine, but all new changes aren't taking effect. We are not receiving any error message, we check the session and it isn't running.
Thanks for your help.

hi,
when you execute the interface manually, current time is written on operator tab and related line.
is that time is true?
Ugur

Similar Messages

OSCommand ODI Command not running on Agent

Hello,
I have a simple .bat file I need to kick off in ODI. When I run it with local service(no agent) it runs fine but when I try to run it under my (installed as a service )agent it fails with the generic error "wrong process return code"
I have changed the properties of the service and specified to log on as administrator but it still fails.
any ideas?
Thanks
Kind regards,
Caoimhe
Edited by: user9213000 on Dec 15, 2010 8:26 AM

user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ QtADB
bash: QtADB: command not found
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ ./QtADBbash: ./QtADB: No such file or directory
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh ./QtADB
./QtADB: ./QtADB: cannot execute binary file
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh QtADB
QtADB: QtADB: cannot execute binary file
user-arch@archusrxpc /home/@solushome/user-solus/QtADB-cwm_edition $ ls -l
σύνολο 2940
-rw-rw-r-- 1 user-arch 1000 5259 Απρ 13 2012 Changes.txt
-rw-rw-r-- 1 user-arch 1000 25330 Ιούν 26 2012 debug.log
-rwxrwxr-x 1 user-arch 1000 2970612 Απρ 13 2012 QtADB
drwxr-xr-x 1 user-arch 1000 0 Ιούν 26 2012 tmp
drwxrwxr-x 1 user-arch 1000 366 Μάρ 13 2012 tools
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $
Last edited by dancer69 (2013-01-17 18:30:23)

Windows task scheduler not running

Hi All!
(First of all, sorry for my poor english!)
I have a couple of windows servers 2008 R2 Enterprise SP1 on my company and one of them doesnt work like it should and was instaled from zero last week.
I create a bat file to do some stuff and because it dosnt work, for test porpouses i made a bat file realy simple, that wirtes file
Here is the bat file code:
echo "text_example" > C:\scripts\works.txt
my user has write permisions and the task is configured to run with my user.
If i run my bat manualy works fine.
If this job is set to the task scheduler "run only if user is loged" also works fine
BUT when i set the task to run wheter "the user is logued or not" and I log off and return after the job was triggered, i found that the last run date is the one i set but the last run result is (0xc000142) and the task ovbiusly didnt work.
Im figthing with this problem las 4 days and i cant find why is this appening (its trange that in the other servers in the same group works fine)
Here is the task code:
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2014-11-17T14:07:58.9325949</Date>
<Author>GROUP\rrepetto</Author>
</RegistrationInfo>
<Triggers>
<CalendarTrigger>
<StartBoundary>2014-11-17T17:46:00</StartBoundary>
<Enabled>true</Enabled>
<ScheduleByDay>
<DaysInterval>1</DaysInterval>
</ScheduleByDay>
</CalendarTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>GROUP\rrepetto</UserId>
<LogonType>Password</LogonType>
<RunLevel>LeastPrivilege</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<Exec>
<Command>C:\scripts\test.bat</Command>
</Exec>
</Actions>
</Task>
Any help will be greatly appreciated !
Thanks In advance!
Ramiro

Since batch job can be run manually without error, cmd.exe is not the problem.
I researched and found that the problem may be due to exhausted desktop heap and the solution is to increase the value.
Please try this step:
1. restart the server first and test again (a simple solution that may work)
2. if the first attempt fail, take a full backup first and attempt to increase desktop heap
http://www.symantec.com/business/support/index?page=content&id=TECH48099
Yes THAT WAS THE SOLUTION FOR THE ISSUE. !!
Now its working perfect!!
Why now its working and not before? Because after made the changes to the registry,
RESTART IS NECESSARY to apply the changes and I have done it yesterday night (this server is working 24x7, so its hard to find a moment to restart it).
Thanks for all to help me with this issue!!! I really,really ,really ,really apreciate !!!
THANKS !!!!!

ODI agent may not running

dear all,
odi agent test successfully, update the scheduling successfully but when pressing the scheduling information it give error
"ODI agent may not running"
kindly solve the issue
regards
Naseer

Hi Ratish,
Following are the things i did and things which are happening .. :)
created a scenario and scheduled it.
And from Topology Man.. Agent Window... clicked on "Update Scheduling"... Output is "Planning Update is Completed" and when i click on Schedule Information" it is throwing warning saying... "Unable to retrieve Agents Schedule"... and my scheduled job is also not executed at scheduled time.
Any idea what could be the problem?
Thanks in advance.
Regards,
Amar

When KM Scheduler is stopped or not running

Hi Experts,
I have created KM Scheduler using the blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515.Scheduled for every 30 mins.
In Systemadmin>Monitor> KM-->i can see whether Scheduler is running or not.
Now the requirement is to send a mail to the portal support team when Scheduler is stopped or not running. Is it possible?and how we can proceed?
Please guide me.
Sony.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

KM Scheduler Task is not running...

Dear All,
I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks. but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
Do i need to configure anything to run KM scheduler Task?
Thanks and Regards,
JAGAN.
Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

Hi Jagan,
The status "0" for your task in "Component Monitor" is fine.
Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
In you task folder, you will see "Service Folder" under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
Name : http://sapportals.com/xmlns/cm/sch
Value: Value1
Also make sure in your portalapp.xml, the values are same:
RFServiceWrapper
service-config
className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
startup= true
service-profile
Name= = http://sapportals.com/xmlns/sch
Prof= Value1
You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
You can use any other name but the it should be same in both the places.
Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
Kind Regards,
Poornima

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Scenario is not running in ODI Standalone agent from OPMN

when i am trying to run my scenario using ODI standalone agent it is not running and it is giving below error in opmn log file.
VARNING: Error retrieving ID statistics for repository WORKREP1.
ODI-1406: Agent Agent_ODI started with warning: JDBC connection error occurs while connecting to the work repository WORKREP1.
Caused By: oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception during repository access.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)
     at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
     at oracle.odi.runtime.agent.utils.AgentOdiInstance.createWorkRepository(AgentOdiInstance.java:60)
     at oracle.odi.core.OdiInstance.<init>(OdiInstance.java:581)
     at oracle.odi.runtime.agent.utils.AgentOdiInstance.<init>(AgentOdiInstance.java:28)
     at oracle.odi.runtime.agent.utils.AgentOdiInstance.createInstance(AgentOdiInstance.java:32)
     at oracle.odi.runtime.agent.utils.OdiInstanceCache.getWorkInstance(OdiInstanceCache.java:181)
     at oracle.odi.runtime.agent.support.InternalAgentUtils.getAuthenticatedTargetOdiInstance(InternalAgentUtils.java:336)
     at oracle.odi.runtime.agent.servlet.AgentServlet.verifyAllIdStatistics(AgentServlet.java:988)
     at oracle.odi.runtime.agent.servlet.AgentServlet.startup(AgentServlet.java:361)
     at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:239)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at org.mortbay.jetty.servlet.ServletHolder.initServlet(ServletHolder.java:431)
     at org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:263)
     at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
     at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:676)
     at org.mortbay.jetty.servlet.Context.startContext(Context.java:140)
     at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1239)
     at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517)
     at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:466)
     at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
     at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
     at org.mortbay.jetty.Server.doStart(Server.java:224)
     at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
     at oracle.odi.Agent.startAgent(Agent.java:204)
     at oracle.odi.Agent.main(Agent.java:538)
Caused by: org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:82)
     at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:524)
     at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:588)
     at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:613)
     at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:645)
     at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:111)
     at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:121)
     at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:136)
     at oracle.odi.core.repository.support.RepositoryUtils$RepositoryInfoSource.loadRepositoryInfo(RepositoryUtils.java:182)
     at oracle.odi.core.repository.support.RepositoryUtils.loadWorkRepositoryInfo(RepositoryUtils.java:382)
     at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:174)
     ... 25 more
Caused by: java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
     at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
     ... 35 more
Caused by: java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:488)
     at oracle.ucp.util.UCPErrorHandler.throwSQLException(UCPErrorHandler.java:163)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:943)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:873)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:863)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:368)
     at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolException(UCPErrorHandler.java:49)
     at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolException(UCPErrorHandler.java:80)
     at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection(DriverConnectionFactoryAdapter.java:122)
     at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.createOnePooledConnectionInternal(UniversalConnectionPoolImpl.java:1610)
     at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.access$600(UniversalConnectionPoolImpl.java:1446)
     at oracle.ucp.common.UniversalConnectionPoolImpl.createOnePooledConnection(UniversalConnectionPoolImpl.java:514)
     at oracle.ucp.jdbc.oracle.OracleJDBCConnectionPool.createOnePooledConnection(OracleJDBCConnectionPool.java:129)
     at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnectionWithoutCountingRequests(UniversalConnectionPoolImpl.java:297)
     at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnection(UniversalConnectionPoolImpl.java:142)
     at oracle.ucp.jdbc.JDBCConnectionPool.borrowConnection(JDBCConnectionPool.java:157)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:931)
     ... 9 more

i have tried to change the all the ways in odiparms file but i am getting the same error message....

Help: I want to auto schedule a load using file watcher but it runs only once for the first time and after that it is not running at all

Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
     credential_name => 'cred',
     username        => 'XXXX',
     password        => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
   file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
     (payload.file_timestamp,
      payload.directory_path || '/' || payload.actual_file_name,
      payload.file_size,
      'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
    program_name        => 'prog1',
    program_type        => 'stored_procedure',
    program_action      => 'YYYY',
    number_of_arguments => 1,
    enabled             => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
    program_name        => 'prog1',
    metadata_attribute => 'event_message',
    argument_position   => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
    file_watcher_name => 'file_watcher1',
    directory_path    => 'D:\AAAA',
    file_name         => '*.txt',
    credential_name   => 'cred',
    destination       => NULL,
    enabled           => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
    job_name        => 'job1',
    program_name    => 'prog1',
    queue_spec      => 'file_watcher1',
    auto_drop       => FALSE,
    enabled         => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.

Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE    12.1.0.1.0    Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2    DBMS_SCHEDULER.SET_ATTRIBUTE
3       ('file_watcher_schedule',
4        'repeat_interval',
5        'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2    -- create credential using operating system user and password (fill in your own):
3    DBMS_SCHEDULER.CREATE_CREDENTIAL
4       (credential_name     => 'cred',
5        username          => '...',
6        password          => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2    (WHEN      timestamp,
3      file_name varchar2(100),
4      file_size number,
5      processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2    (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5    INSERT INTO ZZZZ VALUES
6        (payload.file_timestamp,
7         payload.directory_path || '/' || payload.actual_file_name,
8         payload.file_size,
9         'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2    DBMS_SCHEDULER.CREATE_PROGRAM
3       (program_name          => 'prog1',
4        program_type          => 'stored_procedure',
5        program_action      => 'YYYY',
6        number_of_arguments => 1,
7        enabled          => FALSE);
8    DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9       program_name         => 'prog1',
10       metadata_attribute => 'event_message',
11       argument_position   => 1);
12    DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create file watcher:
3    DBMS_SCHEDULER.CREATE_FILE_WATCHER
4       (file_watcher_name   => 'file_watcher1',
5        directory_path      => 'c:\my_oracle_files',
6        file_name          => 'f*.txt',
7        credential_name     => 'cred',
8        destination          => NULL,
9        enabled          => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create job:
3    DBMS_SCHEDULER.CREATE_JOB
4       (job_name          => 'job1',
5        program_name          => 'prog1',
6        queue_spec          => 'file_watcher1',
7        auto_drop          => FALSE,
8        enabled          => FALSE);
9    -- set attributes:
10    DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
1 row selected.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
        57 N
2 rows selected.

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4

FYI, we've had a ticket open for several days because our scheduled jobs (dbms_scheduler) would no longer run as scheduled after an upgrade to 10.2.0.4 on HPUX, couldn't find the solution by searching in metalink, nor did I find it here or using Google - obviously I wasn't searching correctly. There is a note id that references a set of steps that appears to have resolved our problem. I am putting this note out here so that if you encountered the same difficulty you may come across this note earlier in your troubleshooting efforts rather than later. The full title of the note is: 'Scheduled jobs do not run as expected after upgrading to either 10.2.0.3 or 10.2.0.4'. The Doc ID is: 731678.1.

Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.

Landed Cost manager Program is scheduled to run everyday but it did not run

Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
Thanks
De

1006390 wrote:
Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.What if you submit the request manually, does it work?
Assuming no error can be found in the DB/CM log files, have you verified the scheduled settings for this program? Try to schedule it again and see if this helps.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
https://forums.oracle.com/forums/search.jspa?threadID=&q=Notify+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

Endpoint Protection Client not running run scheduled scan

Hi,
We are running SCCM 2012 R2 CU1 on our site system and clients, having upgraded from SCCM 2012 sp1 12 months ago.
A few of our clients will not run a scheduled scan, even though it displays the Scan date and time in the client properties.
Someome did create a new EP policy and pointed the clients at it, but that didn't fix this problem.
The AV engine and AV definitions are upto date and the real time monitor is running.
In the SCCM console, Active Clients at Risk, the client has Endpoint Protection Enabled showing as Disabled, nothing in the Endpoint Protection Engine Version, nothing for Last Full Scan Start Time, Endpoint Protection Pending Full Scan - No.
The MPLog-xxxx-xxx.log shows:
Signature updated on 02-11-2015 05:57:13
Product Version: 4.7.205.0
Service Version: 4.7.205.0
Engine Version: 1.1.11302.0
AS Signature Version: 1.191.4588.0
AV Signature Version: 1.191.4588.0
2015-02-11T05:57:15.492Z IWscAVStatus::UpdateStatus() succceeded writing instance with state (1) and up-to-date state(1)
2015-02-11T05:57:15.492Z IWscASStatus::UpdateStatus() succceeded writing instance with state (1) and up-to-date state(1)
2015-02-11T05:57:40.982Z Process scan (postsignatureupdatescan) started.
2015-02-11T05:57:50.420Z Process scan (postsignatureupdatescan) completed.
2015-02-11T06:06:47.173Z AutoPurgeWorker triggered with dwWork=0x3
2015-02-11T06:06:47.173Z Product supports installmode: 0
2015-02-11T06:06:47.173Z Task(Scan -ScheduleJob -RestrictPrivileges) is scheduled to run in 604800000(ms) from now with period 21957080(ms)
2015-02-11T06:06:47.173Z Task(SignatureUpdate -ScheduleJob -RestrictPrivileges) is scheduled to run in 28800000(ms) from now with period 28800000(ms)
2015-02-11T06:06:47.173Z Task(Scan -ScheduleJob -RestrictPrivileges -ScanType 2) is scheduled to run in 86400000(ms) from now with period 70114864(ms)
2015-02-11T06:06:47.844Z Detection State: Finished(0) Failed(0) CriticalFailed(0) Additional Actions(0)
The EndpointProtectionAgent.log shows:
Endpoint is triggered by message. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
File C:\WINDOWS\ccmsetup\SCEPInstall.exe version is 4.5.216.0. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
EP version 4.7.205.0 is already installed. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
EP 4.7.205.0 is installed, version is higher than expected installer version 4.5.216.0. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Re-apply EP AM policy. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Apply AM Policy. EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Create Process Command line: "c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe" "C:\WINDOWS\CCM\EPAMPolicy.xml". EndpointProtectionAgent 11/02/2015 12:12:00 2692 (0x0A84)
Applied the C:\WINDOWS\CCM\EPAMPolicy.xml with ConfigSecurityPolicy.exe successfully. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Save new policy state 1 to registry SOFTWARE\Microsoft\CCM\EPAgent\PolicyApplicationState EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
State 1 and ErrorCode 0 and ErrorMsg and PolicyName Default Client Antimalware Policy
SCEP Standard Desktop EP Policy and GroupResolveResultHash 5E75089B490B85DD66BBA85BC91E15A5EA853B9C is NOT changed. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Skip sending state message due to same state message already exists. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Firewall provider is installed. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Installed firewall provider meet the requirements. EndpointProtectionAgent 11/02/2015 12:12:01 2692 (0x0A84)
Could anyone provide any pointers on why the scheduled scan wont work?
Jaz

Hi,
Please verify if any GPO applied and overwrite the setting, you can check registry key:
http://blogs.technet.com/b/mspfe/archive/2013/11/13/system-center-configuration-manager-2012-scep-policy-behavior.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

DB13 - Scheduled Update Statistics not run - Error

Hello gurus,
I´m faccing with an error in DB13, I scheduled Update statistics every day but it did not run due an error.
I think this may resulted because an authorization problem.
In /usr/sap is with this permissions:
drwxr-xr-x 15 orad01 dba   4096 Oct 18 16:34 sap
The /oracle/D01/sapcheck is with the following permissions:
drwxr-xr-x 2 orad01 dba     4096 Nov 14 20:28 sapcheck
Inside of sapcheck directory I can see the following files with permissions:
-rw-r--r-- 1 orad01 dba       32262 Oct 14 13:16 ceeimamu.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:42 ceeisafo.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:50 ceeisazq.sta
-rw-r--r-- 1 orad01 dba        1932 Oct 15 17:58 ceeisbie.sta
-rw-r--r-- 1 orad01 dba        1791 Oct 15 22:16 ceeisyhm.sta
-rw-r--r-- 1 orad01 dba        1931 Oct 15 22:24 ceeisyta.sta
-rw-r--r-- 1 orad01 dba    19394261 Oct 15 23:45 ceeiszph.sta
-rw-r--r-- 1 orad01 dba        1930 Nov 9 11:27 ceenjunx.sta
-rw-r--r-- 1 orad01 dba        1790 Nov 9 11:38 ceenjvuv.sta
-rw-r--r-- 1 orad01 dba      143103 Nov 9 11:40 ceenjwnr.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:46 ceeosxxw.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:49 ceeosydo.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:54 ceeosyqi.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 15:57 ceeotefd.sta
-rw-r--r-- 1 orad01 dba       18530 Nov 16 16:27 ceeotgun.sta
-rw-r--r-- 1 orad01 dba         996 Nov 16 16:27 connD01.log
In DB13 at details error, it show the following statements:
Job executado
Etapa 001 executada (program.RSDBAJOB, variante &0000000000016, nome usuário XNSJAD)
Execução do comando lógico BRCONNECT No host segoviad04
Parâmetros: -u / -jid STATS20101123153214 -c -f stats -t ALL
BR0801I BRCONNECT 7.20 (7)
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:
'ENABLE THREADS'
BR0806I End of BRCONNECT processing: ceeqbmqh.sta2010-11-23 15.32.15
BR0280I BRCONNECT time stamp: 2010-11-23 15.32.15
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job encerrado
Can you help me please!? I do not know how to solve this situation...
Best regards,
João Dimas - Portugal

This wasn´t a new installation... this was a migration from windows/sql server to linux/oracle... and after that migration process I made an oracle upgrade to 11.2g and during this oracle upgrade we upgrade the BRtools to 7.20 version.
I set up other job from DB13 (Verify database) and also it not ran well, it show an error too, but a diferent one:
Parameters:-u / -jid VERIF20101110030000 -c force -w only_dbv -p initD01.sap -m ALL
BR0051I BRBACKUP 7.20 (7)
BR0055I Start of database backup: beeqitms.dbv 2010-11-25 03.00.06
BR0484I BRBACKUP log file: /oracle/D01/sapbackup/beeqitms.dbv
BR0477I Oracle pfile /oracle/D01/112_64/dbs/initD01.ora created from spfile /oracle/D01/112_64/dbs/spfileD01.ora
BR0068E SAP system is running or SAP user is connected to database D01 - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: beeqitms.dbv 2010-11-25 03.00.09
BR0280I BRBACKUP time stamp: 2010-11-25 03.00.09
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
I also checked the permissions in /usr/sap folder and sub folders as per the link you put here... and everything is well... but tell me one thing which owner/group must have set in /usr/sap/ directory? In that help sap link it doesn´t show any suggestion in this column, so I don´t know in this case which owner and group must have set... In my case the /usr/sap/ and dba as group:
drwxr-xr-x 28 orad01 dba      4096 Nov 23 15:20 D01
Kind regards,
João Dimas - Portugal

Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2

Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

ODI Scheduling Not Running

Similar Messages

Maybe you are looking for