ODS activation error"Activation of data records from ODS object terminated"
Hi All,
While activating ODS request I am getting following error
"Activation of data records from ODS object KFI02O50 terminated ".
data load is suceesful for ODS but during activation of the request it is giving error.
I tried to change the status to green manually & then activated the request but still same problem.
Also I tried to delete request & loaded again from PSA & then activated the request but still same problem
If anybody has some solution please let me know.
Thanks in advance
Regards
Sonal
Hi Sonal,
Sometimes when there is erroeneous records that time while activating the Request request get fails.To check this go to manage tab of the ODS there under log u can see the log icon click on that and check y activation got failed..
Assign points if its helpful
Regards,
vid.
Similar Messages
-
Error on activation of data records from ODS object
hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "<i>Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated</i>" and "<i>Activation of data
records from ODS object ZPUR_O01 terminated</i>"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "<i>ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated</i>"
Please help me with this problem.Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull -
Error:Activation of data records from ODS object terminated
Hi All
i got error while loading the data "Activation of data records from ODS object terminated '
could you please tell me procedure how can i solve this issue?
regards
vasu.- First check the Error Messages from the context menu of the activation step. Also check ST22 & SM21. This will tell you where the error is. Sometimes you might get duplicate records.
- Next use the "Manage" context menu for the ODS in RSA1. Check if any of the previous records are red. If its red, it would mean that either load/activation has failed for previous request which needs to be corrected first b4 you correct the current one.
- If al the above are OK, simply repeat the Activation step.
Hope this helps.
Regards
Anujit Ghosh -
Error: IDoc XML data record
Hi all,
We have file->XI->idoc scenario and the problem we are facing is like, when the idoc structure is prepared using XSLT mapping, when the idoc is ready to get in thru the idoc adapter we are getting the following error.
<i><b>Error: IDoc XML data record: In segment
Z1UKGAS_HEADR attribute occurred instead of SEGMENT </b></i>
Anyone faced the same issue....if so pls do throw some light into this issue....
We r in XI 3.0 SP13...
Thanks & regards,
JayakrishnanHi,
In an IDOC structure segment attribute is requried. From the error you posted, it looks like seqment attribute is missing.
<Z>
<IDOC BEGIN="">
<ED SEGMENT="">
</ED>
</IDOC>
</Z>
Naveen -
Update data targets from ODS object automatically
Hello experts,
I have an ods (that has two delta loading every night) with the setting: "Update data targets from ODS object automatically". This ODS is source of only one other ODS.
But we have a chain when there are the seguent steps: delta 1 --> ODS1,
delta 2 --> ODS1; Activate ODS1; delta --> ODS2; Activate ODS2.
The setting "Update data targets...automatically" could create some problems?
I think this because it is happened that in delta loading of ODS2, some records have only the key filled, and all the data fields blank; then, if I make a full repair of these records, all data are correctly filled.
Could be this the cause?
Help me..it is urgent..
Thanks,
VitoHi Vito,
To have better control of processes when ods gets data from multiple sources and supply it forward to ODS and cube ...we generally deactivate the flag "update data automatically".
And Process chains looks like ..
From source 1,2,3 update data into ODS 1.
Activate Data ODS1
Initiate delta from ODS1 to ODS2.
Activate data ODS2.
We did face some problem of blank records with only key filled and later deactivated the checbox "Update data into data targets automatically" and it resovled lots of issues.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN. -
Summing up key figure in Cube - data load from ODS
Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field quantity
123 301 10
123 302 20
123 303 30
Expected record in Cube
Header-field Quantity
123 60
====================
Regards,
Pramod.Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod. -
How to restrict number of Data Records from Source system?
Hi,
How can I restrict the number of Data records from R3 source system that are being loaded into BI. For example I have 1000 source data records, but only wish to transfer the first 100. How can I achieve this? Is there some option in the DataSource definition or InfoPackage definition?
Pls help,
SDHi SD,
You can surely restrict the number of records, best and simplest way is, check which characteristics are present in selection screen of InfoPackage and check in R3, which characteristics if given a secection could fetch you the desired number of records. Use it as selection in InfoPackage.
Regards,
Pankaj -
Error in generating data source from planning area
Hi experts! I have an error while making data source from planning area:
after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
Syntax error in program /sapapo/cl_im_extract_ex======cp
the main reason: the type /BI0/9A0IVWKNDGD is unknown
what you can suggest to solve this problem?
Thanks.Dear Andrey Kudriavzev,
The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
Search for an OSS Note. Raise one if you cannot find the relevant notes.
Regards,
Naveen. -
Short dump error when extracting delta records from R/3
I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelledHi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings, -
Need to transfer data records from one version of sap to another version of
hello,
i have a requirement where i need to transfer the tables with the records in it from sap r/3 4.7 version to sap ecc 6.0 version,now the present issue is how to tranfer the data records from old version to new version......kindly help me in this requirementHi,
Write a program in SAP 4.7 to download all records to a flat file. Then write a program in ECC6 to upload all records from the flat file...........
Thanks,
Aditya. -
Error : IDoc XML data record: In segment attribute occurred instead of SEGM
hi friends
i am doing the file to idoc scenario. in message mapping i had done the static test. but what ever the fields i mapped in the idoc it was not populated in the idoc. and i am getting the error as
error :IDoc XML data record: In segment attribute occurred instead of SEGMENT
can any one solve the problem please
thanks in advance
VasuHi Vasudeva,
Pls do check the nodes which you have mapped to. Also make sure that your SEGMENT field in the target structure is mapped properly.
Cheers
JK -
Error : idoc xml data record : in segment attribute instead of SEGMENT
hi all
i am doing the file to idoc scenario. in that i am getting the error
error : IDOC XML Data record : In segment attribute instead of SEGMENT
i am doing this scenario since 4 days.
can anyone help me
thanks a lot
Vasuin ref. to my post in your earlier thread.
>>>>
in your mapping check, in your IDOC if Begin , segment etc are mapped to a constant say '1'.
Also ref: In segment IDOC attribute I occurred instead of SEGMENT -
How to select set of unique data records from internal table
Hi
I am looking for a command in order to select all unique data-records from an internal table without using a loop. Does anybody know a command that could do this?
<b><u>An illustrating example:</u></b>
<i>Example:
Table content
a 1
a 2
a 3
b 1
b 2
c 1
c 2
c 3
d 1</i>
So I am looking for a command that should provide a, b, c & d for the first column or 1, 2 & 3 for the second column<b></b>Hi,
SELECT DISTINCT MATNR
FROM MARA
into table i_mara.
Best regards,
Prashant -
Hi Friends,
I have question regarding how to update data further from ODS.
I have ODS1 and ODS2.
ODS1 is having deltas updated from ODSA.
ODS2 is a new ODS and now needs to be updated from ODSA.
I have reviewed the help already.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/749bbb595511d4b2bc0050da4c74dc/content.htm
I want to initially update the ODS2 with <u>selection conditions</u> from ODSA.
After that I want to load delta from ODSA to ODS2 by automating the process in process chain.
Please help me know, What is the optimum solution and what are the steps need to be executed.
Thanks,
John.Anil,
I am just repeating the procedure to cinfirm that I understand it properly.
1. Go to scheduler, Initialization option make the status of the overall request red.
2. when it asks for update the QM status to all data targets, select no.
3.and then delete the init. request from Scheduler.
By doing this we just deleting the initialization selection and the request in the subsequent data targets are still green and they contain data.
After that Init. without data transfer will do the work.
Please confirm,
I really appreciate your input on this.
Thanks. -
Direct vs Indirect data load from ODS - InfoCube
We know that there are two options to load data from ODS to InfoCube:
1. Direct load:
If the ODS setting is checked with the option of "Update data targets from ODS object automatically", then when loading data to ODS, then the data also can be loaded to the InfoCube, in this way, only one InfoPackage is needed to load data to the ODS, then the InfoCube can be filled with data automatically.
2. Indirect load:
If the ODS setting is NOT checked with the option of "Update data targets from ODS object automatically", then not only the InfoPackage to load the data to the ODS is needed, but also the InfoPackage to load data from the exported datasource of the ODS to the InfoCube is needed to be created in order to load the data from ODS to the InfoCube.
I wonder what are the pro and con between the above two loading methods from ODS to InfoCube.
Welcome to every BW expert inputs!HI Kevin,
Direct Loads or rather Automated Loads are usually used where u need to load data automatically into the final data target. And it has no dependencies.This process has less of maintenance involved and u need to execute a single infopackage to send data to the final data target.
But Indirect Loads are usually used when u have a number of dependencies and this ODs object is one of the object in a process chain. So if u require the this ODS data load wait till some other event has been executed , then indirect loads are used through process chains.
Regards,
JAsprit
Maybe you are looking for
-
Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page.
-
Problem getting jsp component from jspdynpage
Hi, I am making a call in my java class in method doProcessBeforeOuput with the following call table = (TableView) this.getComponentByName("tableview_AddMaterial"); Object[] objs = this.getComponents(); Both return nulls for the object, how does so
-
How do I move photos from iPhoto to Pinterest?
I have just downloaded the latest iPhoto. I work a lot with Pinterest, and it would be helpful to be able to move (pin) photos from iPhoto to Pinterest. Since I'm a green horn at this, I'd appreciate a simplistic answer. I thank you!
-
Splitting Purchase Order Idoc based on qty
Hi All, I am having a requirement wherein i have to insert multiple line items in purchase order idoc based on quatity .Eg if the line item qty is 3 then the same line item has to be repated for 3 times and purchase order idoc has to created with 3
-
Documentum and weblogic Portal 9.2 issue...
Hi, Is anybody face this problem while configuring VCR with Data source. Folder structure are created properly in VCR but when I am clicking any content node then I am getting below exception. Any help is strongly appreciate. java.lang.NullPointerExc