ODS activation error( The creation of the export DataSource failed

Hi Friends,
i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
1.The creation of the export DataSource failed
2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
3.Error when creating the export DataSource and dependent Objects
Any help would be appreciated
Thanks

Seems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
cheers,
Vishvesh

Similar Messages

DSO activation failed due to creation of the export datasource failed

hi experts,
i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
please advise, thanks!
attach error info:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
The delta process ODS does not exist
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZFIM_D09

Hi,
As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
Regards,
Durgesh.

Transport Error-The creation of the export DataSource failed

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.

No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_BID
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_QUO
/     The creation of the export DataSource failed
      User not authorized. Session terminated
      User not authorized. Session terminated
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0PUR_DS03
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)

The creation of the export DataSource failed

Dear All,
Can u give me the some information to fix the following error which i got while moving Multicube from Dev sys to Prod. sys. multi cube consits of lot of ODS object as dependent objects.
Error FYI.
The creation of the export DataSource failed
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object 0CRM_CN2P
Regards,
Veeru.

Hi Srinivas,
If itz SS problem i can able to transport the other objects like cubes, Info Obj.. etc. only while transporting the ODS obj it is showing
can u help me on this.
any way i wil chk with basis team and ask to reset PWD.
Regards,
Veeru.

The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02

Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).

Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

Creation of export datasource failed

Hi All.
i copied a bussiness content data source object (DSO) and tried to activate it. it is giving error that
"The creation of the export DataSource failed"
Why ??? where m i going wrong.
Thanks & Regards,
Mo

Hello,
This is the problem becos the system is unable to create DATAMART for DSO object. The following reasons might be hindering the creation of DSO. Please check whether
1) You have proper authorization to create Datasource/Datamarts.
2) If so then, check whether DATAMART for the BW Self Source System is properly Installed from Business Content. (I hope you are working on the version 3.5 or later.. here we need to manually install Aplication Component related to Datamart from Business Content so that Datamart creation never fails after that)
3) Also check BW Self Source System is properly functioning.
Thanks
Kishore Kusupati
Edited by: Kishore Kumar K on Jul 28, 2008 5:35 AM

Error in transporting ODS(Error when creating the export DataSource.......)

Hi All,
 When I try to transport ODS from dev to quality i m getting the following error.
DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object XADDR1

 XADDR1 is my ODS. BQ1CLNT355 is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
Please Suggest solution,if any body encountered same problem. It is very urgent for me.
Regards,
Ramana.

Hi
You generate export datasource once again
Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
Hope this helps
Reg
N Ganesh
assign points if useful***

The creation of export datasource failed.

Hi everyone! This is Chong Tao from Central Michigan University and I got one problem recently when I was doing my set-up of the BW course. I actually wanna copy the infocube but when I click the "Generate export datasource", it automatically comes up one error message "The creation of export Datasource failed". What should I do to overcome this problem? Thanks for paying attention to this problem and I need your valuable advice as soon as possible since it is for the student in this SAP BW course.

Hi,
I guess your objective is to copy an existing infocube. Right ?
In that case, Right Click Infocube and use 'copy'. This will create another Infocube with the same structure, but with no data. You can then fill this copy Infocube by cerating transformation between the two infocubes and scheduling through DTP.
'Generate export datasource' can normally be done when there are two separate BW systems and you want an Infocube to be a source of data to another Infocube in a different BW system( though it can be used in the same BW system as well).
Best Regards

Flash CS6, QuickTime: The export operation failed because it ran out of memory.

Exporting a QuickTime movie file seems to be an old issue with previous versions too. In CS6 I always get the error message: "The export operation failed because it ran out of memory." I've got tons of memory and have allocated increasing amounts to the cache with no success.
My small and fairly simple file was created with Flash CS5 which seemed to work fine at the time of creation. I've tried everything recommended online but with no luck so far. BTW, I reinstalled CS5 and tried that too but it just hangs now, and there's no error message.
Does anyone have a solution?
(OS X 10.7.4)

If I may join this discussion... I loaded up CS6 two days ago and have just completed my first 60 second animation using it. Like everybody else here, it all went fine until I tried to export it to QuickTime – something that has never been problematic before.
I ended up exporting it as a swf and opening that in CS4. Then I could export it, but the resulting QuickTime movie was over 500 MB in size! Okay, so then I opened it in QuickTime Pro and exported it from there. This brought the file size down to a far more reasonable 35 MB, but now the soundtrack has gone! So now I am having to replace the sound in Final Cut Pro.
This is a real palaver – and not conducive to heaping praise on CS6 when questioned. I note that there is talk of Adobe rectifying this "bug", but it would be really good to hear from somebody at Adobe with:
a) An apology
b) An estimated time of delivery
c) A best practice work round
But I'm guessing that anybody that works at Adobe will be the last person to read this...

ODS Activation Error:characteristic 0CALMONTH is not plausible

HI,All:
i have upload data from flat file to ODS successfully,but i am get following error when i try to activation data in this ODS.
- Error getting SID for ODS object ODS_DX01
- Value '000120' of characteristic 0CALMONTH is not plausible
- Error when assigning SID (details in long text)
- Activation of data records from ODS object ODS_DX01 terminated
How should i get rid of this error. Any idea would be appreciated.
Regards
Jerry

Hi Sandeep,
Appreciate if u dont copy other posts..and use it as ur own..!
ODS Activation Error
(u can freely post a link to other's posts..with due credit to the author)
Vishvesh
Message was edited by:
Vishvesh Bahirat

ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B

Hello
I am using the EnableBitlocker.vbs script to automatically assign the TPM and start the encryption. I am running it from an elevated command prompt. Here is are the arguments I am running with
cscript EnableBitLocker.vbs /on:tp
/l:c:\bitlockerlog.log /promptuser /ro:"MBAM" on
All is well and it prompts the user for a PIN but then it fails.
Here is the full log file. I haven't been able to find any info on the error code in the subject.
Script processing started 02/07/2014 14:43:27
Proper number of command line arguments passed to the script
---------------Executing with the following arguments------------------
Enable parameters: tp
Logging location: c:\bitlockerlog.log
Create recovery key: No recovery key use specified
Encryption method: 3
Create SMS status MIF's: No SMS status MIF's will be created
Reset TPM ownership: 1
User prompting: 1
Connection succeeded to MicrosoftTPM
Successfully retrieved a TPM instance from the Win32_TPM provider class
TPM found in the following state:
Enabled - True
Activated - True
Owned - True
Connection succeeded to MicrosoftVolumeEncryption
TPM is in a ready state to enable BitLocker.
Change TPM owner password specified on the command line.
Random TPM owner password is: ;&K:)BU65|c7_v2n
Completed converting old owner password to owner authorization: 0
Completed converting owner password to owner authorization: 0
Starting to change owner authorization process on the TPM
ERROR - Failed to change owner authorization on the TPM with the following exit code: 80280001
Successfully connected to WMI StdRegProv
Checking if Group Policy encryption method is set...
Found EncryptionMethod with value: 4
Found EncryptionMethod policy registry key ignoring any /em options on command line
Found ActiveDirectoryBackup with value: 1
Found RequireActiveDirectoryBackup with value: 1
Determined client Group Policy configured to require AD escrow of recovery password
EncryptableVolumes count is: 1
The EncryptableVolume(s) found: \\?\Volume{ad6db324-01dd-11e4-8272-806e6f6e6963}\
EncryptableVolume used for encryption is: C:
The volume has a protection status of: 0
BitLocker Protection is Off
Get conversion status is: 0
The volume has a status of fully decrypted
The following user is logged on: MGMT\80151318-sys
Attempting to enable BitLocker TPM + Pin
ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B
Script ended 02/07/2014 14:43:51
Any and all help would be appreciated. This has worked before on a different laptop.
Thanks

Hi,
This error indicates that the group policy isn't set correctly, when configure the group policy at teh server side, you should notice that only one of the additional authentication can be required at start up , otherwise a policy occurs, the notice can be
found just like below:
and after test, the error indeed occurs, just like the screen below:
So, I suggest to check the group policy for bitlocker settings, you can only choose one start up authentication method.
Regards
Wade Liu
TechNet Community Support

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

The export operation failed to create an image file

I've been experiencing bizarre behavior when attempting to export images to my Usb-connected card reader. After reading some threads on this form, I was convinced that my reader was defective. Same problem on a brand-new reader.
The specific behavior was as follows: I attempted to export roughly 150 custom-named 500 KB image files to the memory card. The last 15 or so failed to transfer and I got the message, "the export operation failed to create an image file for the versions identified below."
Trashing VP list didn't help. What did was changing the custom name. There was nothing particularly unusual about the original custom name and the new one was virtually identical. After changing the name, the export worked without a hitch.
Has anyone experienced similar behavior? Any ideas what's going on?

problem was that the NEW card reader was faulty as well. My luck!

AIP-13978: Error - the input xsd fails validation

Hi,
For an ebXML setup over Generic exchange. I have to perform validation against XSDs which are nested in structure.
So while setting up the Document definition in the Business action, I uploaded the files as zip files and provided the name of the root XSD file.
However on clicking finish the for business action I am getting the IP-13978: Error - the input xsd fails validation: java.lang.NullPointerException
In the log file error message is as given:
2007.03.12 at 14:40:16:093: AJPRequestHandler-ApplicationServerThread-5: BusinessLogicLayer - (ERROR) java.lang.NullPointerException
     at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.getXSDElement(XMLSchemaImport.java:259)
     at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.importXSD(XMLSchemaImport.java:609)
     at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.importZipFile(XMLSchemaImport.java:426)
     at oracle.tip.buslogic.bll.b2b.GenericWizard.createNativeDatatype(GenericWizard.java:452)
     at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.createDocumentDefinition(DocumentProtocolWizard.java:1228)
     at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.createDocumentDefinition(DocumentProtocolWizard.java:1061)
     at oracle.tip.tools.integration.buslogic.b2b.collaboration.CreateBusinessActionFinishEventHandler.performExtendedActions(CreateBusinessActionFinishEventHandler.java:245)
     at oracle.tip.tools.integration.event.IPBaseUnboundEventHandler.performActions(IPBaseUnboundEventHandler.java:88)
     at oracle.tip.tools.integration.event.IPEventHandler.handleEventIP(IPEventHandler.java:138)
     at oracle.tip.tools.integration.event.IPEventHandler.handleEvent(IPEventHandler.java:104)
     at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
     at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
     at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
     at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
2007.03.12 at 14:40:16:093: AJPRequestHandler-ApplicationServerThread-5: UI - (ERROR) oracle.tip.tools.integration.buslogic.b2b.collaboration.CreateBusinessActionFinishEventHandler.handleEvent(): Error -: AIP-13978: Error - the input xsd fails validation: java.lang.NullPointerException
Please let me know to resolve this issue.
Thanks,
Gautham

Please check the root xsd and it its dependent XSD are present

ODS activation error( The creation of the export DataSource failed

Similar Messages

Maybe you are looking for