ODS Activation Failure due to Number range object for characteristic ZTXLEV

Hi
I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
can anyone help me
thanks
KINDLY SEND MAIL TO [email protected]
srinivas

HI,
check this
Error calling number range object 0MATERIAL for dimension D4 ( )

Similar Messages

  • ODS Activation Failure due to Number range object for char doesn't exist

    Hi
    I am having problem regarding ODS actvatn, My oDS is gttng fail due to number range for char object doesn't exist.
    error when checking sid for ODS.
    I have made all tests in RSRV for dat Infoobject
    can any one suggest me ...........
    points will be assigned
    kindly mail me 2      [email protected]

    Hi,
    chk tis blog.. hope it clears wat buffering is
    /people/vikash.agrawal/blog/2006/04/05/load-lots-of-data-147faster148-with-buffering-number-range
    What is buffering number range:
    “Buffer the Numbers ( which system picks up from database -in case of Master Data – SIDs & in case of Transaction Data Dimension Ids) and use these buffered numbers rather than hitting the database (for each new master data records or for each new combination of SIDs to create a new Dimension Ids). So the concept is –
    “SID Number Range can be Buffered Instead of Accessing the Database for Each SID”
    Hope its clear!

  • Number range object for characterstic DATE does not exist

    When I am trying to load data from ODS to cube getting below error message.
    "Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
    In update rules we are trying to convert this date Infoobject(Char) into Key figure.
    If anyone had exp with similar issue please reply.
    Thanks in advance
    Vani

    Hi Vani,
    Is ZEXTDATE Characteristic have any data in it? Can you check once.
    Veerendra.

  • How to find out the Number range object for Incident number

    How to find out the Number range object for Incident number ?
    CCIHT_IAL-IALID
    regards,
    lavanya

    HI, an example.
    data: vl_num type i,
          vl_char(6) type c,
          vl_qty type INRI-QUANTITY,
          vl_rc type INRI-RETURNCODE.
    CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        NR_RANGE_NR                   = '01'
        OBJECT                        = 'ZRG0000001'
       QUANTITY                       = '1'
      SUBOBJECT                     = ' '
      TOYEAR                        = '0000'
      IGNORE_BUFFER                 = ' '
    IMPORTING
       NUMBER                        = vl_num
       QUANTITY                      = vl_qty
       RETURNCODE                    = vl_rc
    EXCEPTIONS
       INTERVAL_NOT_FOUND            = 1
       NUMBER_RANGE_NOT_INTERN       = 2
       OBJECT_NOT_FOUND              = 3
       QUANTITY_IS_0                 = 4
       QUANTITY_IS_NOT_1             = 5
       INTERVAL_OVERFLOW             = 6
       BUFFER_OVERFLOW               = 7
       OTHERS                        = 8
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    vl_char = vl_num.
    write vl_char.
    Regard

  • Maintain number range object for excise grp

    Hi Gurus,
    During stock transfer, while doing Goods receipt I am getting the below error
    "Maintain number range object for object J_1IRG23D, year 2010, excise group"
    Could anyone please tell me the trans code for maintaining no range for excise group...
    Thanks,
    Raja

    Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
    Regards,
    Nagesh
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

  • Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise

    Dear Experts,
                              While  posting  MIGO, System throws below error : 
    Mainintain number range object for object J_1IINTNUM, year 2010, excise
    Maiintain number range object for object J_1IRG23A1, year 2010, excise
    Maintain number range object for object J_1IRG23A2, year 2010, excise
    Actually we are posting the MIGO for the  fiscal year 2009, still i am getting error  why ?
    regards
    rajakarthik.

    check the posting date what u r puting , it should be on or  before 31/03/2010
    i think this is only the issue dont looks like any other issue
    or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
    and try to post your transaction in 2009
    hope this helps
    Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM

  • Maintain number range object for object J_1IRG23C1, year 2008, excise

    Dear All,
    I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
    Maintain number range object for object J_1IRG23C1, year 2008, excise
    Maintain number range object for object J_1IRG23C2, year 2008, excise
    B/regds,
    CB

    Dear CB,
    Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
    Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
    Hope this helps.
    Njoy SAP
    -Saravanaganesh

  • Maintain number range object for object J_1IINTNUM

    Dear,
    While doing GRN i am getting this error:
    Maintain number range object for object J_1IINTNUM, year 2009, excise group
    Maintain number range object for object J_1IRG23A1, year 2009, excise  group E1
    Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
    What i did is:
    1) I maintained NR for Objects J_1IINTNUM,  J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
    Still i am getting the same error in MIGO.
    Regards
    Utsav
    Edited by: Utsav.agra on Nov 18, 2009 12:24 PM

    Dear Pankaj,
    thanks actually i wans maintaining number as 1 instead of 01.
    Thanks
    Utsav

  • Maintain number range object for object J_1IINTNUM, year 2009, excise group

    Hi SAP Guru !
    Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
    1 - >   Maintain number range object for object J_1IINTNUM, year 2009, excise group
           Message no. "4F159" .
    2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
           Message no. 4F159
    3 - >  Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
            Message no. 4F159
    Regards,
    San

    dear sir
    while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
    so please check it should be 01 in the number column and year and number range interval .
    regards
    jrp

  • Maintain number range object for object J_1IRG23A1, year 2007, excise

    Hi All,
    I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
    Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
    but i have already maintained number range for  such object.
    please guide me.
    Regards,
    Ravindra

    Hi,
    Which Number u given,
    No    year       From number       to number
    01     2007      1                          10000
    I think u allready given,this is for checking.
    Raghu

  • Number range Object for Production order Number range profile.

    Hi ffriends,
       Can anybody tell me how to maintain the <b>Serial Number Range</b> for production order serial no.
       I working on automatic serail no generation for production order.I have one serial no range profile which I am assigning to material in material master  but I don't know the number range object for that profile.
       Or can anybody tell me how we attach serail no profile to a serial no range object.?
           Please it is urgently required..........
    Regards,
    Rajesh Akarte

    hi rajesh
    in the serial number profile there are certain business procedures which will create the serial no ,kindly check whether for your procedure you have assinged whether serial number to be arranged or not
    slecect the serial number profile in sutomization field( which you have specified in Material master) and select the serialization procedure and check whether the <b>PPRL</b> procedure is assinged,also check the serial no usage assigned
    for detailed process have a look here
    <b>http://help.sap.com/saphelp_47x200/helpdata/en/3c/abc38a413911d1893d0000e8323c4f/frameset.htm</b>
    regards
    thyagarajan

  • Number Range Object for a Infoobject

    Hi Gurus,
    Can anyone explain me what is the significance of Number Range Object for a perticular infoobject and what do you mean by Buffering of those Number Range Object...
    Your help will be appreciated..
    Thanks a lot in advance..
    Thanks,
    Shalaka.

    Hai Shalaka,
    The number range buffer is used to increase performance when assigning
    numbers. Instead of fetching the numbers each time from the database,
    a single access to the buffer suffices. Only when the buffer is empty,
    is it refilled from the database (table NRIV).
    Use of the buffer has the following benefits:
    · Accessing the main memory is a thousand times quicker than accessing
    the database. Speed is particularly important for applications that
    assign numbers frequently.
    · Database accesses are always subject to the database transaction
    mechanism. Once an application has assigned a number for one user, a
    second user cannot assign a number until the first user has executed a
    commit operation on the database. The application blocks further
    assignment, and the second user has to wait, until the commit has been
    executed.
    · The number range buffer can also prevent deadlock situations, which
    may arise from assigning different numbers in a different order.
    Since the SAP kernel accesses table NRIV directly for the number range
    buffer, the structure of the table must never be changed. This also
    applies when adding new fields.
    We can set number range buffering inSNRO t code.
    Loading Master data - The number ranges buffer for the SID's resides
    on the application server and reduces DB server accesses. If you set
    e.g. the number range buffer for one InfoObject to 500, the system
    will keep 500 sequential numbers in the memory and need not access the
    database.
    #####>>> whenever master data loading is done system creates SIDs, &
    to create SIDs system look into a specific table, check the latest
    number & generate the next no in the series, so to check this latest
    no for every time ( every record) system needs to go back to database
    table & generate the next no in series. when I do the buffering I
    provide the whole series to system at application level so it need not
    to go back to table to check the latest no & generate the next one. It
    just picks up the next in available on application server.
    >>>####
    Please refer - SAPnote 130253
    Loading Transcation data - The number range buffer for the dimension
    ID's resides on the application server and reduces DB server accesses.
    For example, if you set the number range buffer for one dimension to
    500, the system will keep 500 sequential numbers in memory and need
    not access the database
    If you load a significant volume of transaction data (e.g., initial
    load), increase the number range buffer. If possible, reset it to its
    original state after the load in order to minimize unnecessary memory
    allocation
    Hope this information helps u....
    Asign points if helpfull
    regards
    KP

  • Number range interval for characteristic 0CSTELMNTYP is missing

    All,
       I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP.  The transport moved fine to my Q environment, but not to prod,  The error was as above and
    Number range interval for characteristic 0CSTELMNTYP is missing
    Message no. BRAIN049
    Diagnosis
    The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
    Procedure
    Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
    I don't understand this - what do I need to do?
    Thanks.
    Dave

    Hi Kedar,
    I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
    For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
    When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
    Thanks for you help in Advance.
    Sudhakar

  • Number range missing for characteristic 0AF_SEAN after importing request

    Hii friends,
    I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
    Then error which i m getting is ,
    Number range interval for characteristic 0AF_SEAN is missing
    Error when activating InfoObject 0MATERIAL
    Characteristic 0MATERIAL: Error when generating master data routines
    Error when resetting InfoObject 0MATERIAL to the active version
    I am waiting for ur positive reply.
    Thanks & Regds,
    Kavan Shah

    hi Kavan,
    try
    transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
    Error calling number range object 0MATERIAL for dimension D4 ( )
    or check oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07
    Transporting DataSources
    hope this helps.

  • Maintain number range object for object J_1IRG23A1, year 2011

    hi
    when i try to maintain no range for object J_1IRG23A1 with t code SNRO i get following error
    please specify an existing number range object how to rectify
    Thnx

    Hi
    Please use the following document to configure the CIN specific number ranges. Hope steps mentioned here help you.
    http://help.sap.com/bestpractices/BBLibrary/html/J81_ProcStockMaterial_EN_IN.htm
    Nishant

Maybe you are looking for