ODS activation failures after new hardware installation..urgent

Hi All,
I am working in PRD.There are 10 process chains which i need to monitor daily.Daily ODS activation fails in 4 of the 10 chains.The error message for two of the failures are,
Task 0040 during SID specification without confirmation     
and for another process it is showing "DBIF_RSQL_SQL_ERROR" error.
manually I am doing steps and the activation is successful.These type of errors we are getting after the new hardware installation.
Could anyone let me know are there any patches to be applied inorder to avoid such type of errors.
Please advice me what to do.
Thanks,
Manjula

What is the patch your currently on at the moment.
It could also be some of the settings in RZ11 have been changed. You need to work with your basis people to resolve this.
DBIF_RSQL_SQL_ERROR is a common problem and usually due to not enough processor's available and the database gettings into a knot.
Check SM21 and ST22 for the more information on the issue.

Similar Messages

  • No msg from process chain on ODS activ failure

    All,
    We are loading and activating a CRM ODS (0CRM_PROH) in a process chain.  The process chain is set up to deliver a message if the ODS activation fails, but this is not happening reliably.
    For instance, yesterday a hex character came over from the source system causing ODS activation failure.  Strangely enough, the overall status of the request in the monitor was green.  Also, the activation step in the RSPC planning view was blue, not red as I would expect.  You could really only see the failure by switching to log view in RSPC, where it was clear the ODS activation had failed.
    Any thoughts on why the overall status of the request is green instead of red or yellow when the ODS activation fails?  Or, any thoughts on why no message is going out?  It's probably obvious that I'm new at interpreting the RSPC screens, so any general references on this topic would be helpful.
    Thanks,
    Bob
    P.S.  The ODS in question is set for automatic activation and automatic updating of data targets.  We are running BW 3.10.21, BI_CONT 3.30.16.

    Hello Diane
    We also had this issue, but with an older version (30B patch 7, works OK w/ patch 14).
    Anyway, to fix it:
    - create a new variant (let's call it V1 as an example) for the SAP program RSODSACT1
    - in your process chain, insert an ABAP call after the ODS load. Punch it RSODSACT1 as program and V1 for the variant
    It worked for us
    Good luck
    Ioan

  • Data Plan Activation Failure after I updating to 8.0.2

    After I updated my Ipad2 to 8.0.2, I have not been able to use my cellular date. It keeps "searching" for connection and then pops up "Data Plan Activation Failure". What do I do?

    I turned gmail off and turned on iCloud email.  It won't load either. 

  • ODS Activation failures

    Generally it is obesreved that the ODS activation failes with error something like 'SID cannot be determined'. Also many times we see that ODS activation goes on for 2-3 hours. In this case when we manuall activate the ods it gets completed successfully. However, can anyone tell me the reason for long activation time and the error mentioned above. It would further be helpful if you could tell me the possible preventive measures to avoid manual interventions...Thanks for help in advance

    Hi Lye
    First i will explain the reasons for long running ODS.
    1.This is probably because of too many parallel ODS activations running at the same time.
    2.some times some particular jobs running may lock your ODS activation which you can monitor in SM37 which results lock waits and dead locks.
    If you see the PID no for the job which is involved in lock waits,if you feel that particular job is not important at that point of time you can terminate the job(not ODS activation job) and repeat the job after the succesful completion of the ODS activation.
    If the ODS activation fails with SID error as you mentioned,i hope this solution may help you.
    1.Check the request for the infopackage which is loading the ODS in RSRQ
    2.give the request of the bearing infopackage or request ID and execute in RSRQ
    3.it shows whether that reqest is updated in to your target correctly or not.If its not loaded check the IP processing setting whether the reuested data is reaching in to targets are not.some times data load happens till PSA then push the data by doing process manually step.
    4.Now reapeat the ODS activation step.
    but if it is SID issue, then load the master data for that particular characteristic and repeat the ODS activation step.
    Hope may help you
    Regards,
    Venkata Lakshmikanth

  • ODS ACTIVATION Failure frequently......

    Hi,
    We r loading data from ods to cube , but ODS activation process for 3 ods is happening parallely.
    This ods activation failed sequence two times , but in logs error mesgs
    are "Activation of data records from ods object terminated,Qm status is in not green before ODS activation"…
    we are loading approx 10,000 records
    The chain is like this…
              START
    ODS1          ODS2          ODS3   à these 3 ODS are Parallel
    |          |          |     
    CUBE1     CUBE2     CUBE3
    Can anyone tell me what might be the reason…for failuring frequently.. this is a monthly chain
    -Shah

    Shah,
    1) I said "conflicting" because I thought you were loading all data to ONE ODS.. so I thought they might have some "locking" problem..But since u had confirmed me that 3 different ODSs.. this is out of scope for us..I am taking back my words..
    I do not see "technically" issue with Process chain design as all are 3 different tables now..
    It has a techincal issue, if you are loading 3 ODS parallely and Activating all 3 ODSs at a time..
    in the above scenario.. say ODS1 completed 1st and it tries to start the Activation node..( which tries to activate ODS2 and 3 also..) but still 2 and 3 are loading.. can lead to the mentioned error..
    generally.. if u schedule too many parallel jobs at a time it will occupy all available system resources and can lead to some ewrrors..
    regards,
    hari
    Message was edited by: Hari Kiran Y

  • ODS Activation failure

    Hi All,
    I am getting the below error in ODS activation step of a Process Chain. Repeat of the step goes to success.
    Process <DP> did not confirm within the permitted time period
    Message no. RSODSO_TOOLS025
    Diagnosis
    The timeout occurred after  600 seconds. This is a configurable parameter. Details for change options and their effects can be found in the appropriate part of the documentation.
    We are on BI7 level 13.
    Please share the thoughts if you have seen this error.
    Thanks!

    Hi,
    Improving ODS Activation
    By making some adjustments to the Data Store object parameters, you should be able to activate the request. Please note and make the following adjustments in transaction RSODSO_SETTINGS (you can adjust this for each Data Store object):
    1) Maximum package size (for activation).
       This you should reduce to 10000. Then the package   
        processing would be less time consuming.
    2) Maximum wait time for process (for activation)
       This could be increased to e.g. 600
    3) Button "change process parameters"
       here the activation is set to be run in backround (which is also adviced by SAP).
    If you want the processes to run in background, you may have to increase the amount of batchjobs available in your system. Otherwise the activation can not run in parallel if there are no batchjobs available. This could also occur because there are other programs using batchjobs also.
    Also please check the server group used in RSODSO_SETTINGS You can make use of the RZ12 for the same. If you adjust these settings the activation should finish.
    https://forums.sdn.sap.com/click.jspa?searchID=8414593&messageID=2920621
    https://forums.sdn.sap.com/click.jspa?searchID=8414593&messageID=2935203
    /thread/346369 [original link is broken]
    ODS performance
    Thanks,
    JituK

  • ODS Activation Failure due to Number range object for characteristic ZTXLEV

    Hi
    I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
    can anyone help me
    thanks
    KINDLY SEND MAIL TO [email protected]
    srinivas

    HI,
    check this
    Error calling number range object 0MATERIAL for dimension D4 ( )

  • ODS activation failure due to Time characteristic

    Hello Gurus,
    One of my ODS activation job is failing because of the following error:
    Error when assigning SID: Action VAL_SID_CONVERT table YSDENTTIM
    Value '0545' of characteristic 0TIME is not a number with 000006 spaces
    The Infoobject YSDENTTIM is created using 0TIME as a reference with data type TIMS and it is mapped to the R/3 field ERZET (VBFA table). The data format for this field is hh:mm:ss and hence I dont understand this message.
    I cannot correct the data in PSA too because my load has around 7-8 million records and hence it is difficult to locate this record in the PSA.
    Has anyone faced this issue before?
    Thanks,
    Rishi

    Hi,
    The definition of PSA is itself it allows the correct data as well as RAW data...
    So the data which entered into PSA is not accepted at ODS level means there is wrong/error data from the source....
    Now to find the erroneous record u have to go to PSA maintainence and chk all the packets and select filter button below....it'll give u in which fields/columns u have to filter...
    Now select tht concrened filed/column(in ur case it was time i suppose) and continue...
    In the next screen u enter the data packets from 1 to all in ur PSA take it the MAX value....
    Now in the another column/field value u enter ur error value there as 0545 and execute...if all the settings are right it'll take u take the rows/records which is having the incorrect time u have selected/filtered...
    Now to edit the records u have to delete the request from ur target DSO/CUBE and edit with correct entrie and save...and reload/reconstruct into DSO and activate ur request
    Hope so it won't throw the eror now...
    Note: Here the main concern is how u can find the eror records...
    rgds,

  • ODS activation due to new field taking long time

    Hi,
    I have created transport request to transport
    DATA MART
    ODS (Because i have added two new fields to this ODS which i have to populate by data mart)
    Update rule for Data Mart and ODS
    Activate dependent object for this ODS
    From my Testing server to Production Server
    Now after transporting it to my Production server  it has some 8 million records on Production server and request is still activating ODS DATA (Readjusting table structure for this new fields and data records).I have down time scheduled in couple of hours
    Now my question is
    What happens if request is not activated in Production server before down time?
    Will i loose entire data on production server?
    if yes What can i do to prevent this?
    Please inform as it is urgent.
    Regards,
    Rahul.

    hi pabloj,
    Can you please inform me what can be solution in case it happens?
    Can reinit in that case solve the problem or do you have some other idea?
    Please inform
    Regards,
    Rahul.

  • ODS Activation failure due to inconsistancies

    Hi All,
    I am getting an  error "Inconsistancies found while checking the Data Store Object" while activating the ODS.
    Actually,I have added new feild to ODS(containing data) and activated it successfully.
    But while deleting the same feild and activating the ODS, I got this error,even though the data is deleted.
    Request you to please help me on this issue.
    Regards,
    Jyothsna

    Hi Jyothsna,
    Is the object you added to ODS is a Mater data IO??
    Also adding the object is not a problem. But when you delete, you might face this issue.
    You will have to delete entire ODS contents before deleting the IO from it.
    (Or)
    If it is a characteristics IO, you can leave that field wthout doing any mapping.
    Hope it helps!
    Regards,
    Pavan

  • Hard drive failures after 10.6 installation, 2 library folders appear.

    I have had to erase my intel imac hard drive 3 times and reinstall 10.6.
    Each time the computer slowed to a standstill after a day or so, while using safari or mail.
    It could not be repaired with disk utility.
    After reinstalling 10.6 I have then retrieved the data from time machine. In all cases I had to update to OS 10.6.1 in order get my printer going (with the updated driver).
    The odd thing is that when checking the hard drive trying to find out what is causing the problem
    I noticed that it had
    one library folder in the system folder
    and another library folder outside the system folder
    on the internal hard drive.
    Is this the reason for the hard drive failures?
    What should I do with this?? How could this have happened?
    Please help! I've been using only Mac since 1986 more or less without any trouble,
    but now I am having the kind of problems with SL that I thought only Windows users had!

    HI,
    "*It could not be repaired with disk utility.*"
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    *If DU reports errors Repair again and again until DU reports disk is repaired.*
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. *Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space.*
    There should be a Library folder in the System Folder.
    Carolyn

  • ODS activation error after system copy

    Hi all,
    we are getting error on activation of request in ODS. I ran RSRV tests on the ODS "Check How Up-To-Date the Generated Programs of an ODS Object Are "
    Result was :
    Activation program is not current
    Difference in line: 1469
    Lines in temporary program: i_logsys = 'BWS300'
    Lines in active program: i_logsys = 'BD2300'
    Activation program has to be generated again
    I had clicked Correct Error in RSRV and the problem was resolved.
    I have also done the following steps as  mentioned in sap note 518426, but did not solve my problem
    Execute transaction "RSSGPCLA".
    Set the status of the programs belonging to program classes
    "RSDRO_ACTIVATE", "RSDRO_UPDATE" and "RSDRO_EXTRACT" to "Generation required".
    To do this, select the program class and then activate the "Set
    statuses" button. Important: Reset the three named program classes
    only.
    I have this issue with all ODS objects. It is very time consuming to run the above RSRV task for all ODS objects.
    Is there any program that I can run to regenerate activation program for all ODS objects?
    Thanks,
    Naveen
    Edited by: Naveen Ketha on Mar 1, 2008 10:36 AM

    Hi Naveen,
    Not very sure it would resolved the issue ,but have a look at note# 886102.
    Summary
    Symptom
    The source system is hard-coded in the generated program for the
    DataSource. This leads to problems after the logical name of the source
    system (BDLS) is converted.
    More Terms
    Transaction BDLS
    Cause and Prerequisites
    This problem is caused by a program error.
    Regards
    Mr Kapadia
    Edited by: Mr Kapadia on Apr 4, 2008 3:07 PM

  • ODS activation error after the structure change

    Hi all,
          I am getting a short dump with " "DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC  "  error when I am trying to activate an ODS after changing its structure. Do I need to change any setting before loading the data in to the ODS after adding few more fields to it. Exact error says
    An exception occurred. This exception is dealt with in more detail below    
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was    
      neither                                                                    
    caught nor passed along using a RAISING clause, in the procedure            
      "ACTIVATE_SIDS" "(FORM)"                                                   
    Thanks

    The above-described symptom is due to a program error during the transfer of error messages. The problem can occur, for example, if a hierarchy is activated during the activation of an ODS object.
    If the indicator 'BEx Reporting' is set for the ODS object, entries are created in the SID tables of characteristics involved during the activation of requests for this ODS object. Newly-created SID values must then be inserted into hierarchy tables. This is not possible for reasons of consistency if a hierarchy is activated at this time. The RRHI_CHAVLS_REQUEST_TO_HIERA function module is used for inserting newly-created SID values in hierarchies.
    To simplify the search for the cause of the problem, additional error messages are now displayed in the monitor. If the problem is triggered, for example, by the simultaneous activation of a hierarchy, the error message RH 14 is issued. As described in note 717967, this error message contains the name of the affected hierarchy. If the activation of an ODS object is cancelled due to a serious error, this now also causes additional entries in the log of transaction SM21 (Syslog). These entries start with the character string '> RSDRO':.
    Solution
    BW 3.0B
               Import Support Package 21 for 3.0B (BW3.0B Patch21 or SAPKW30B21) into your BW system. The Support Package is available whennote 0679665 with the short text "SAPBWNews BW3.0B Support Package 21", which describes this Support Package in more detail, is released for customers.
    BW 3.10 Content
               Import Support Package 15 for 3.10 (BW3. 10 Patch15 or SAPKW31015) into your BW system. The Support Package is available when note 0601055  with the short text "SAPBWNews BW 3.1 Content Support Package 15" is released for customers.
    BW3.50
               Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available when note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, is released for customers.

  • Profile down after new modem installation

    Hi there, I had Business infinty installed recently and have had similar problems to a couple of other forumites: Had the same 2 week modem failure problem, the engineer came round yesterday and installed a new one and after a few shaky hours my connection has levelled of at 19mbs with a profile at 20mbs, upload speed dropped from 1.6mbs to .6 at the moment. A bit trying as previously my profile was set at 27mbs and had 1.6mbs upload speed.
    What can be done to raise my profile? is it a question of wait and see or should I call BT?

    Update for those with similar problems:
    it was another defective modem, third one now in place and everything is back as it should be. BT have got a major problem regarding these modems

  • ODS activation failure due to uncaught exception

    Hello BI experts,
                              I have a issue while activation the ODS. ODS is failing to activate with the foll msg "ABAP/4 processor: UNCAUGHT_EXCEPTION"
           An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_SDB_ORA_PROGRAM_ERROR', was
    caught and
    therefore caused a runtime error.
    The reason for the exception is:
    An error occurred in the program:
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_SQL_EXCEPTION", which was raised in the program
    "CL_SQL_STATEMENT==============CP",
    specifically in line 31 of the (include) program
    "CL_SQL_STATEMENT==============CM002".
    The cause of the exception was:
    ORA-20000: Insufficient privileges#ORA-06512: at "SYS.DBMS_STATS", line
    2150#ORA-06512: at "SYS.DBMS_STATS", line 14112#ORA-06512: at line 1
    Can somebody guide me in resolving this problem ?
    Regards,
    Pradeep

    Hi All,
               Thanks for ur reply, but i want to highlight on some points.
    -> I have SAP_ALL authorization, so as per the authorization point of view i dont  find any problem.
    ->  My system has be upgraded to Support package 18.
                  So i strongly  have a feeling that  this might be a  oracle database issue. Any inputs on this reg the same would be highly appreciable .
    Regards,
    Pradeep

Maybe you are looking for