ODS - Activation Problem
Hi All,
There are two ODS in our scenario. One Standard and One Custom ODS.
For this standard ODS ( for Region - 1) we performed an Init long before for which the Deltas are running everyday smoothly.
Now we have built a custom ODS for Region - 2 which is extracting from the same datasource.
Before we could actually perform an Init to the custom ODS, the deltas of the Standard ODS have run and due to selection of Update all data targets" in Infopackage, a delta request has come into our custom ODS also.
Before performing an init we deleted all the delta request from the custom ODS
After performing init (Without data transfer) when we tried to activate our init request our custom ODS throws an error msg " ODS Object was built incorrectly." On further help window we found that it asks to upload the Init request of Standard ODS ( Region - 1 ).
Also we tried to delete our init request and create a new init but we are unable to delete the init selection which we created for the custom ODS. When we tried to delete the init request it prompts us to delete all the init request for that datasource.
Additional Information:
Version: BW 3.1C
Please help us out !!
Regards,
Buela.
Hi,
Yes, but some times when you delete a delta loads from the ODS and do some init or full loads it will show ODS was build incorrectly, you can try this option, there wont be any major problem by doing this.
Regards
Sankar
Similar Messages
-
ODS Activation Problem - Error getting SID
Hi All,
I am facing the problem while activating the request,
"Error getting SID for ODS object xxxx.i know lot of threads are there in forum but those all are taking about while loading the data to ODS,Here i loaded the data into my first ODS(here fine) and then transferring the data to another ODS while activation of Data in second ODS i am getting problem.the second ODS checked the Bex reporting.
If masterdata not existis then it can be a problme in my first ODS but i didn't face any problem in First ODS.First ODS loaded the data from R/3 and second ODS using the datamarts.
Any ideas how to solve this problem.
Thanks,Use Tcode RSRV Tests in Transaction RSRV All Elementary Tests ODS Objects Foreign Key relationship of reporting-relevant ODS object and SID table characteristics (Dbl Click)
From the right side window, expand u201CForeign Key relationship of reporting-relevant ODS object and SID table characteristics & Enter second ODS name, and click u201CTransferu201D
Now, click u201CExecuteu201D (Toolbar)u2026 and check whether the results displayed in green icon..
Otherwise, go back and click u201CCorrect erroru201D (Toolbar)...then try to activate second ODS -
ODS Activation Problem (with SIDS) BIG PROBLEM !!!
Hi
Ok we have a situation in our project but first a few facts: -
1: For ODS we do not use keys but have a infobject that creates a unique ID for each entry with a bit of ABAP in the update rule (yep not very good I know but too many to change now)
2: The SID table keeps growing so we have deleted it four or five times with SE14.
Now I am not sure if these are related to our problem as we have used SE14 before and it hasnt created prolems??
THE PROBLEM
Some of th ODS that use this unique Info Object (we will call this A1) that creates unique entries will not activate with SID creation. It doesn't give much information apart from whatever process A1 is it is returned with errors.
We get the following message
Process 000034 returned with errors (process 34 is the one that tries to get a SID for A1)
Message no. RSODSO_PROCESSING006
Activation of M records from DataStore object CA_TS1 terminated
We also geta short dump every time too and that is copied below the line where it fails
Does anyone know of how i can reset the SID gerenration or anythign that may help
52 ID 'KEY' FIELD 'BI0'
53 ID 'DATA' FIELD l_field.
54
55
56 IF i_abend EQ rs_c_false.
57 *... Nachricht an den Message-Handler schicken
58
59 DATA: l_type TYPE smesg-msgty.
60
61 *... S-Meldung wenn kein Handler initialisiert
62 IF g_active IS INITIAL.
63 l_type = 'S'.
64 ELSE.
65 l_type = 'W'.
66 ENDIF.
67
68 CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
69 EXPORTING
70 i_class = 'BRAIN'
71 i_type = l_type
72 i_number = '299'
73 i_msgv1 = i_program
74 i_msgv2 = i_text.
75 ELSE.
76 DATA: l_text TYPE string,
77 l_repid TYPE syrepid.
78
79 l_repid = i_program.
80 l_text = i_text.
81
>> RAISE EXCEPTION TYPE cx_rsr_x_message
83 EXPORTING text = l_text
84 program = l_repid.
85 ENDIF.
86
87 ENDFUNCTION.Yep right click and delete data then set up new initial etc with very small selection.
Reloaded and exact same error message.
when I check the /BI0/SBBP_OBGUID table it only has one entry whilst the other infoobjects are getting filled in their SID tables so is there any way to sort of kick this table up the butt and reset it or something??
Your right about the P table so we can cross that out of the picture )
I do think it is somethign to do with the fact that we have used SE14 too many times and it hascaused in consistencies but if you have any ideas how to resync it or somethign it would be great
thanks -
Hi guys,
I have one delta request in my ODS. That delta request contains 0 records. But this request is not getting activate and as well as not deleting from ODS.
Please provide quick solutions.
regards
rajaJob started
Step 001 started (program RSODSACT1, variant &0000000002248, user ID PADMAJA)
The last step of the activation still contains errors.
Activation of data records from ODS object CAMSTO02 terminated
The last step of the activation still contains errors.
Activation of data records from ODS object CAMSTO02 terminated
The last step of the activation still contains errors.
Activation of data records from ODS object CAMSTO02 terminated
The last step of the activation still contains errors.
Activation of data records from ODS object CAMSTO02 terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE -
Problem with ODS activation -- Urgent
Hi All,
I have a problem with ODS activations, when I trying to activate ODS data automatically/ Manually. It is going to short dump.
Could you anybody pls help me in this issue.
Thanks in Advance
NarendraSorry for delay,
I raised an OSS messsage and waiting from reply.
The ODS fetch the data from 6 sources. all the 5 sources data is correctly updating in the ODS. I have ODS activation problem with only one soure data.
The error is
RSMO
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
Activation of data records from ODS object ZPMPRCST terminated
SM37 Job log
Error Message from Job log (SM37) (Highlights of the Job log)
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
RSODSACTREQ Table Entries
Table: RSODSACTREQ
Displayed Fields: 10 of 10 Fixed Columns: 3 List Width 1000
InfoCube Request ID Data packet number Boolean Boolean Request ID ODS operation Activ. status
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000000 X X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 0
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000001 X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 4
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000002 X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 4
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000003 X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 4 -
Data activation problem at ODS
Hi All,
I am not able to load the purchasing data 2lis_02_scl (init load) in to ODS, Actually I am getting error message at data activation in ODS level.
The error messages are
1. Activation of M records from DataStore object ZP2_PSCL terminated
2. Error during confirmation of process 000001
3. Caller 09 contains an error message.
4. A caller 01, 02 or equal to or greater than 20 contains an error meesage.
5. The material PBG600 does not exist or is not activated
There is no material with that name in BW as well as R/3. And below I am giving the job log details of ODS activation.
Job started
Step 001 started (program RSODSACT1, variant &0000000060772, user ID U6X9539)
Activation is running: Data target ZP2_PSCL, from 1,572,117 to 1,572,117
Overlapping check with archived data areas for InfoProvider ZP2_PSCL
Check not necessary, as no data has been archived for ZP2_PSCL
Data to be activated successfully checked against archiving objects
SQL: 06.06.2007 09:09:48 U6X9539
BEGIN DBMS_STATS.FLUSH_DATABASE_MONITORING_INFO;
END;
SQL-END: 06.06.2007 09:09:49 00:00:01
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_461J7HV0XMIXCCH1SE9VX63A6 with ID
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_461J7HV0XMIXCCH1SE9VX63A6 with ID
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
Activation started (process is running under user U6X9539)
All data fields updated in mode "overwrite"
Process started
Error during confirmation of process 000001
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_461J7HNCENX7TPXLMK7JN44KE data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object ZP2_PSCL terminated
Activation is running: Data target ZP2_PSCL, from 1,572,117 to 1,572,117
Overlapping check with archived data areas for InfoProvider ZP2_PSCL
Check not necessary, as no data has been archived for ZP2_PSCL
Data to be activated successfully checked against archiving objects
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
Activation started (process is running under user U6X9539)
All data fields updated in mode "overwrite"
Process started
Error during confirmation of process 000001
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_461J7HNCENX7TPXLMK7JN44KE data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object ZP2_PSCL terminated
Activation of M records from DataStore object ZP2_PSCL terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Please help me on this issue.
Regards,
PRKHi,
Thanks to all, After loading the master day I am trying to load the transaction data for purchasing information.
Right now the data at ODS is not activating and is showing the two below error message.
Error Message
1. Activation of M records from DataStore object ZP2_PSCL terminated
2. Error during confirmation of process 000001
Please help me on this issue.
Regards,
PRK -
ODS Activation - Background Job in SM37 is still active
Hello Gurus,
When I try to activate an ODS Request, the START button is disabled. Then when I select JOBS button on the same screen, it shows the previous ODS activation job with ACTIVE status. But the previous job is already showing as ready for reporting with no problems. Is there any setting where the START button is enabled after the completion of the background job
Thanks in advanceHi,
There is no setting to enable to START button , it will be enabled automatically once the activation job is completed. Did you check if the activation job that was running was for the latest request? You can check this by looking into the job log where the request ID will be available. Sometimes even if the activation job is running in the background, the request in the ODS will still be in green status-not available for reporting and you tend to think that the activation has not started or the activation for the previous request is still running.
First check the request ID in the job log to ensure which request is being activated and if the activation is completed. After this you can either stop the job or let it run based on the situation.
Regards,
Shilpa -
ODS ACTIVATION ERROR IN BI 7.0
Hi,
Iam Facing the problem in activation of ODS....
When i loaded the data in ODS manually..The data was succesful and activation also ran well...
But when see the same in the processs chain ....Activation of ods is in red...
I repeated it...but still stays in the same red status...and gives the message
ODS ACTIVATION FOR 'ODS NEME' TERMINATE.
This is in BI 7.0...
Can anyone p[lease guide me what is the actual problem...
Thanks,
Shashikanth.Hi Shashi,
What's error mesg shows?
Probably, this is becos of RFC connection failed.
Regards
Sanjiv -
Error during ODS activation- request deletion
Hello Gurus,
We had a problem during ODS activation, could you please help?
We are on BW 3.1
Activation of an ODS failed with the message, "Fiscal year variant MC is not maintained for calendar year 2009u201D, u201CError getting SID for ODS object ZODS_O02u201D and u201CError when assigning SID: Action VAL_SID_CONVERT table 0FISCPER."
The expected data for 2009 didn't arrive, so the activation step in the proces chain has failed.
What I've done is, just deleted the request from the ODS.
But while this job was running, there was a short dump, and the same job was shown as cancalled under SM37. Though the request was successfully deleted from the ODS, it is showing as cancelled in SM37.
I've given below the log details of the job.
Job started
Step 001 started (program RSDELPART1, variant &0000000003334, user ID ABCD)
Delete running: ODS object ZODS_O02, from 310,818 to 310,818
Delete is scheduled; Selection conditions were substituted
Request REQU_4AZBURUGR09EXTAS8A9IRZUI4 successfully deleted from ODS object ZODS_O02
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled.
Could you please clarify the reason for the short dump and for the job getting cancelled?
thanks in advance,
RajHi,
As an help i suggest you can first check the corresponding message for the "Message type X" in transaction se91.
Follow the below procedure for the same :
1.Execute ST22 > Double click on any entries
2.Go to Source Code Extract
3.Locate u201C>>>>u201D and you will see Message
i.e Message X041 (XX) in this example.
- XX is the message class
- 041 is the message class no. in the example above.
4.Now open SE91.Enter the details we found from Source
Code extract in ST22.Click Display
5.Find the corresponding message.
May be the message could much more elaborate your problem so it could be handeled properly.
Thax & Regards
Vaibhave Sharma -
ODS Activation Issue in Prod - Critical
We are in BI 7. We have a huge ods ZXYZ in Prod. It has more than 400 million records. BEx reporting - off.
Over the last weekend some data was added the requests were being activated and there was master data activity in parallel. The ODS activation failed with SYSTEM_EXCEPTION. Unfortunately not investigating the root cause, the ODS activation was resumed and it returned SYSTEM_CANCELED again as there was master data activity going on.
The problem is that request is now partially activated and it became in faulty status. When trying to activate, we get the following error message.
<i>Activation of M records from DataStore object ZXYZ terminated
'A' and 'U' entries exist in RSODSACTREQ for request REQU_CTAKWUIM6ZAWBQC1K6Q5TVL8M - termination</i>
When trying to delete that request which was partially activated, it fails complaining about Faulty status of the ODS.
The problem is we are not moving forward as the request cannot be deleted/activated due to this.
RSODSACTREQ table has Activation status 2 - Activate failed for this request.
Can you experts please advice.Hi,
I see that your message was not answered and you may not have this issue any more. But for future reference you could refer to note 947481. You might be able to use step 1 from this note to clean the failed request and reload your data.
Hope it will help some day. It did work for us.
Sameer Gandhi -
Hi Friends,
I got error when the ODS activating in Process Chain.
The Error Messages are
1. Inconsistent aggregation behavior - activation will be terminated.
2 Activation of M records from DataStore object 0PUR_DS03 terminated
in the data target (ODS) the request are in Red but activated as it is showing Request For Reporting Available flag having Query symbol..means the requests are available for reporting.
What should be the possible reason
How should i rectify it.
Thanks&Regards
Anandhi,
I have activated ODS manually yesterday. the chain ran today.
But today i got the below error while data is loading into ODS.
Error Message Below.
Runtime Errors RAISE_EXCEPTION
Date and Time 07.04.2009 03:43:06
Short text
Exception condition "NOT_EXIST" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Please sugeest to resolve the problem
Regards
Anand -
ODS ACTIVATION Failure frequently......
Hi,
We r loading data from ods to cube , but ODS activation process for 3 ods is happening parallely.
This ods activation failed sequence two times , but in logs error mesgs
are "Activation of data records from ods object terminated,Qm status is in not green before ODS activation"
we are loading approx 10,000 records
The chain is like this
START
ODS1 ODS2 ODS3 à these 3 ODS are Parallel
| | |
CUBE1 CUBE2 CUBE3
Can anyone tell me what might be the reason for failuring frequently.. this is a monthly chain
-ShahShah,
1) I said "conflicting" because I thought you were loading all data to ONE ODS.. so I thought they might have some "locking" problem..But since u had confirmed me that 3 different ODSs.. this is out of scope for us..I am taking back my words..
I do not see "technically" issue with Process chain design as all are 3 different tables now..
It has a techincal issue, if you are loading 3 ODS parallely and Activating all 3 ODSs at a time..
in the above scenario.. say ODS1 completed 1st and it tries to start the Activation node..( which tries to activate ODS2 and 3 also..) but still 2 and 3 are loading.. can lead to the mentioned error..
generally.. if u schedule too many parallel jobs at a time it will occupy all available system resources and can lead to some ewrrors..
regards,
hari
Message was edited by: Hari Kiran Y -
ODS activation failures after new hardware installation..urgent
Hi All,
I am working in PRD.There are 10 process chains which i need to monitor daily.Daily ODS activation fails in 4 of the 10 chains.The error message for two of the failures are,
Task 0040 during SID specification without confirmation
and for another process it is showing "DBIF_RSQL_SQL_ERROR" error.
manually I am doing steps and the activation is successful.These type of errors we are getting after the new hardware installation.
Could anyone let me know are there any patches to be applied inorder to avoid such type of errors.
Please advice me what to do.
Thanks,
ManjulaWhat is the patch your currently on at the moment.
It could also be some of the settings in RZ11 have been changed. You need to work with your basis people to resolve this.
DBIF_RSQL_SQL_ERROR is a common problem and usually due to not enough processor's available and the database gettings into a knot.
Check SM21 and ST22 for the more information on the issue. -
ODS activation process random error in process chain
Dear All,
In my process chains, the process of ODS activation is sometimes in error. It is a random error, it is not always the same ODS and process chain.
The message error is DBIF_RSQL_SQL_ERROR.
I noticed that, on right-clic -> Change variant to the process of ODS activation, I have the following message:
"Not all infoobjects can be read".
For information, in the processes of activation of the ODS, the unique parameter is the name of the ODS to be activated.
Thank you very much for your help,
ArnaudHi......
Check SAP Note : 631668......
According to this note :
Symptom
This note applies only to BW systems under ORACLE.
Loading data into InfoCubes terminates with an error: ORA 60, "deadlock detected". The monitor log displays the entry "CALLER 70 missing" and the request is flagged as red.
Other terms
Caller 70, DEADLOCK, ora0060, bitmap, indexes, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
Reason and Prerequisites
In SAP BW, there are two fact tables for including transaction data for Basis InfoCubes: The F and the E fact table.
Unlike the E fact table, the F fact table contains the information about the request from where the transaction data originates.
Therefore, transaction data is always written to the F fact table and the package dimension contains the request to which the loaded data belongs.
Using 'Request compression', the system reads the data of a request from the F fact table and writes it to the E fact table without request ID and compresses.
For good reporting performance, you must keep only the data of a few requests in the F fact table since the F fact table is partitioned according to the key of the package dimension and the data of all requests is always read. Therefore, you should compress the request if you are sure that the loaded data is correct and that you no longer have to delete the request.
When you install BW on an ORACLE database, BITMAP indexes are created on the fact tables to improve the reporting performance of the system.
These have a negative effect on the performance when loading data and the deadlock mentioned above (ORA 60) may occur as a result. The DEADLOCKs occur during parallel insert operations because ORACLE does not support a blocking concept for BITMAP indexes at data record level.
Solution
Before loading movement data, delete secondary indexes from the F fact table and create them again after the loading process. If the F fact table is small, no performance problems occur.
Alternatively, you can also load requests serially into InfoCubes by first loading the data only into the Persistent Staging Area (PSA) and then serially into the InfoCube. If you use the data transfer process (DTP) for loading in BW 7.0, this option is no longer available.
NOTE
This avoids the deadlock problem. However, you should note that after some loading processes, it is necessary to reorganize the BITMAP indexes because they degenerate very heavily and, therefore, the read and writing performance deteriorates dramatically.
Hope this helps you.....
Thanks==Points as per SDN.........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 29, 2008 3:14 PM -
ABAP/4 processor: RAISE_EXCEPTION error while ODS Activation
Hi all,
We are facing the problem with ODS Activation.
While ODS activation, we are getting error - "ABAP/4 processor: RAISE_EXCEPTION" very frequently .
Could anybody please guide me why this error happened and how we can recover this error and is there any precautions to avoid this error.
Thanks & Regards,
SudharsanHi Sunil,
Thanks for your reply.
I dont have much knowledge on ABAP and how can you please let me know how this error resolved by your ADMIN team.
Since we are facing this problem frequently, anybody tell me atleast, why this error happened?
Regards & Thanks
Sudharsan
Maybe you are looking for
-
How do I send invite to same person on different mails
Hi, I need to send out invitations for an event. I add people in calendar through "Invitees". Problem is that I need to invite some people twice or three times using different addresses i.e. [email protected] + [email protected] + [email protected] A
-
How to replicate a customized condition table from ECC to CRM
Dear All, We have created a new condition table in ECC, using a new set of key fields to define sales district specific product price. This table is in ECC only and we would like to replicate it to CRM. Could you please let me know how we can do that
-
Bloard03 and cond_a01 relationship
Hi All , I have a scenerio where I need to create an inbound idoc for contarcts with refernce to Purchase requisition that has conditions at line item level . So I need to use bloard03 and cond_a01 in combination . please suggest how do we relate t
-
Best replacement for Adobe Forms Central survey functionality
I am disappointed that you are discontinuing Adobe Forms Central... Please advise of what other applications do you have that provide the abilitity to create quick surveys that I can email out and then view all of the feedback and create reports. Th
-
is there any problems in iphone 5 wifi? others connecting but mine is not.. sometimes depends on distance! help pls