ODS Activation queue not getting cleared after activation
Dear Experts,
I have a strange situation in my BI 7.0 system. Within one ODS I have an activation queue (new data table) of around 34Gb in size. As far as I know, this table should be empty, because all requests are activated correctly.
Every night a delta is loaded into the ODS and there are no errors. But still the data remains also in the activation queue.
In fact: All requests since the initialization still reside in the activation queue.
My question is: Can I savely delete all data from the activation queue?
It is only occuring for one ODS, all other ODS'es do clear the activation queue succesfully.
Here is a part of the log for the last delta load, which might lead to the actual problem:
07.10.2008 00:07:39 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_D48V1ORBHRBOPNPN3S8I1RUEC with ID 00073900 RSM 703
07.10.2008 00:07:40 Parallel processes (for Activation); 000003 RSODSO_TOOLS 018
07.10.2008 00:07:40 Timeout for parallel process (for Activation): 000600 RSODSO_TOOLS 019
07.10.2008 00:07:40 Package size (for Activation): 020000 RSODSO_TOOLS 020
07.10.2008 00:07:40 Task handling (for Activation): Backgr Process RSODSO_TOOLS 021
07.10.2008 00:07:40 Server group (for Activation): No Server Group Configured RSODSO_TOOLS 022
07.10.2008 00:07:40 Parallel processes (for SID Gener.); 000003 RSODSO_TOOLS 018
07.10.2008 00:07:40 Timeout for parallel process (for SID Gener.): 000600 RSODSO_TOOLS 019
07.10.2008 00:07:40 Package size (for SID Gener.): 020000 RSODSO_TOOLS 020
07.10.2008 00:07:40 Task handling (for SID Gener.): Backgr Process RSODSO_TOOLS 021
07.10.2008 00:07:40 Server group (for SID Gener.): No Server Group Configured RSODSO_TOOLS 022
07.10.2008 00:07:40 Activation started (process is running under user OLTP_RFC) RSODSO_PROCESSING 029
07.10.2008 00:07:40 All data fields updated in mode "overwrite" RSODSO_TOOLS 023
07.10.2008 00:07:40 Process 000001 for determining SID for InfoObject 0STORNO started RSODSO_PROCESSING 045
Thanks,
Steven Groot
Dear Experts,
Finally I got some input from SAP about this issue, which resolved the error.
Within the table RSODSACTREQ, there was an entry with an errorstatus. This entry was the cause of the activation queuenot being deleted.
As quoted by SAP in response to my OSS Message:
The RSODSACTREQ table records requests which have been activated.
However, sometimes this table can contain requests which have actually
already been deleted.
The timestamp for this request (REQU_ELCCK3YPESODU19NXQH9BQZ70) is the
19th of Feb 07, yet there is no such request in the ODS (first request
is the 20.02.2007).
Such a request, which has an entry in RSODSACTREQ with status "2"
will prevent deletion of the new data table.
If the request does not exist anymore in the change log table and there
is no data for the request in the active table, then you can resolve
this inconsistency by deleting the entries for this request from table
RSODSACTREQ, and then the activation queue will be truncated with the
next successful activation.
Maybe you can use this information if it is applicable to your situation as well.
Regards,
Steven Groot
Similar Messages
-
DUMMY_BW (0FI_GL_04) delta queue not getting cleared
Hi,
We're using minute based extraction approach for 0FI_GL_04 and thereby have two delta queues for the 0FI_GL_4 extractor in the SAP ERP ECC system: One for the ‘DUMMY_BW’ and the other for the 'real' BI system. The delta queue for DUMMY_BW is not getting cleared automatically in production system and it keeps on adding more records in the queue which is in turn consuming memory in ARFCSDATA. Any thoughts on this would be really helpful.
Regards,
KarthikHi Gurus,
Please help me on how can I check that on what fields 0FI_GL_20 is pulling delta.
I tried to find the MSG Type to check in BD52 for relevant field list, in ROOSGEN table. the entry for MSG type is blank there.
Any help on this is appreciated.
Thanks,
Sourabh Deo -
UWL items not getting cleared after performing action
Hello
We are on EP 7.0.
We are experiencing a strange behaviorin UWL.
When end users receive workitems in their inbox and they take the appropriate actions, the workitems still stay in the inbox. Normally they should no longer appear.
I have tried the refresh in the UWL iview but no luck.
It seems to work in DEV and other landscape. It does no work in Production. The software installation of UWL are the same across all landscapes.
Is there any other setting that is required. In SAP GUI this is not an issue.
Any feedback or tips would be helpful. thanks.
Regards,
SunilHi,
As far as I can remember, this is a known limitation of UWL.
Please, check this thread : UWL work item not getting cleared
I am unsure whether you use the correct button the refresh the UWL (it is well hidden!), check the slide 6 in this document :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6&overridelayout=true
Best regards,
Guillaume -
I am not getting clear alert from OEM 11g Grid, even after the issue solved
I am not getting clear email alert from OEM 11g, even after the issue fixed.
For eg: I got critical alert when I have shutdown the DB.But I didn't get clear alert even I have started my DB and is up running.
I am getting only critical and warning alerts but not clear alerts from 11g Grid control.
Please help me in troubleshooting the issue....
Thanks in advance.............
vgcrlBullitt wrote:
there email address is [email protected]
Thank you... I will give that a go...
Martin -
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
Open Item not getting Cleared automatically
Dear Sir,
For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
Our business scenario is as below :
After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
Regards
B Mittal
RegarPO number cannot be taken as sort feild hence the value is in blank always.
You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
reward if useful
sarma -
GR/IR Clearing a/c not getting cleared..
Dear All,
My GR/IR clearing account is not getting cleared automatically after Invoice posting..is it the standard behavior or anything
missing?
For example- GR/IR Clearing a/c is 13110100,when GRN is done it is getting credited and once invoice is posted it gets
debited so it should show cleared when we run FS10N / FBL3N
please let me know whether it is needed to clear manually?
NarenHi
F.13 is for executing the setting configured under Financial Accounting -> General Ledger Account -> Business Transactions ->Open item clearing - > Prepare Automatic clearing. In this place, the GL account needs to be updated with the relevant criteria like, what are the fields to be matched for clearing like Reference field, assignment, etc.
After that, if F.13 is executed for this GL account then it will clear based on the criteria specified above.
Hope it clarifies
Regards
Lakshmanan Krishnan -
WCS:- WLC Alarm not getting cleared automatically on WCS
ALarm TAB:-
==========
Severity: Message:
Critical ------------------------------Port 2 is down on Controller.
This Alarm is not getting cleared automatically, Where as the alarms generated for AP's are getting cleared, I would like to know is this the default behaviour or we need to look into some thing here. To clear this i need to manually delete the alarm.
Any help would be greatly appriciated.Alarms are automatically cleared after 7 days. Clear the alarms manually if you want to clear the alarms before 7 days. For more information refer http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#qa11.
-
Screen fields not getting displayed after Line 16
Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode? -
Production Reporting out put not getting deleted after 30mins what we set.
Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
VenkatHi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek -
Vendor Account not getting Cleared.
Dear All,
First of all thanks everyone for your support till date.
I have an issue. When I am trying to clear a vendor account from F-44 its not getting cleared. Its showing a negative balance of Cash discount and is not getting adjusted with any account.
However when I am processing the open item for the same vendor in FBL1N. The total is 0.
Can any one suggest how to go ahead and clear this account.
Thanks & regards
Om Prakash guptaDear All,
Any updates on this issue as it has become a serious problem here. There ia an objection from Auditor.
Kindly Suggest.
Regards
OM -
SD Reversal not getting Cleared
Hi Experts,
When an invoice is getting posted in SD and subsequently when such invoice is cancelled, the line item is not getting cleared. In FBL5n it is showing both the line items as open for all these cases. Please advice
Thanks in AdvanceHi,
VF11 only cancell the invoice and post the reversal document in FI.
First you clear the original document and reversal document manually in FI
use T code F-32 or automatically in F.13
It is related to OB74 setting for this Cusotmer' Recon Acc
please Check the OSS notes 1259505 and Note 400000 -
SOCO requiremnts not getting cleared.
Hello Freinds,
I am working on SRM 5.0 classic scenario( with support pack 11). The requiremnts are not getting cleared although follow on docs are created for them ( PO). This is happening for only goods shopping carts and not for the limit.
Any inputs on this will be highly appriciated.
Regards
SRM USERHi Muthu ,
I have check the code , But i sisnt see any difference , Infact we didn done any change recently . It was working fine beofre support pack and still working fine in another system aftter support pack .this Badi code is same in the both systems .
you can also have look into this code.zsrm_sourcing is a custom table where we are maintaing document type and account assignment catogory for catalog items.
Thank you .
Get details of shopping cart.
CALL FUNCTION 'BBP_PD_SC_ITEM_GETDETAIL'
EXPORTING
i_guid = item_bbp_guid
IMPORTING
E_ITEM = ls_item
ET_ATTACH = lt_attach
TABLES
E_ACCOUNT = lt_account
E_PARTNER = lt_partner.
If lt_attach got any records sourcing needs to be done.
SET SOURCING parameter to 'X'.
IF lt_attach[] IS NOT INITIAL.
SOURCING = 'X'.
EXIT.
ENDIF.
If lt_partner doenst contain a fixed vendor, sourcing
needs to be carried out.
READ TABLE lt_partner TRANSPORTING NO FIELDS
WITH KEY partner_fct = c_vendor. " Fixed vendor
IF NOT sy-subrc IS INITIAL.
SOURCING = 'X'.
EXIT.
ELSE.
If there is a fixed vendor, but item is not assigned to
account assignment category, EXPENSE or INTERNAL ORDER .
Sourcing needs to be carried out for this case.
Load table with sourcing rules
SELECT * FROM zsrm_sourcing
INTO TABLE lt_sourcing.
CLEAR SOURCING.
LOOP AT lt_account ASSIGNING <fs_account>.
READ TABLE lt_sourcing TRANSPORTING NO FIELDS
WITH KEY acc_cat = <fs_account>-acc_cat
skip_sourcing = c_x.
IF sy-subrc IS NOT INITIAL.
SOURCING = 'X'.
EXIT.
ENDIF.
ENDLOOP.
ENDIF. -
Not getting cleared with internal working of JSF
Hi All,
I have started with basics of JSF and created some simple apps using netBeans.
However I am not getting cleared with the exact internal working of JSF i.e. how the things are implemented in JSF libraries: jsf-api and jsf-impl.
Please advice or share some links on this.
--SushantHi,
While creating JSP custom tags, we start from scratch by first creating tag handler class then .tld file for that and finally deploying both these files.
I am looking for a similar approach for making our own JSF component.
I don't want to put jsf-impl API into lib directory. Is it possible to make a simple component using jstl standard libraries ?
--Sushant -
JSF: Error Message are not getting cleared
Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
DownloadResponse.sendDownload( response, is, fileName );
faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.
Maybe you are looking for
-
Problem in F.05 in foreign currency valuation
Hi all we are facing some problem in the F.05..that is we are getting some amount difference in one company code 6000 but we do not have any issues with the forex revaluation. We are following the same process for both the company codes i. e 4000 an
-
Recently my iMessage has stopped working I don't know for what reason but when I'm connected to my home wifi I cannot sent messages as not delivered pops up in red with an exclamation mark. Other apps like Snapchat cannot be used however it does seem
-
NewSubprop​erty with named type in remote execution
Hello, I have a problem in TestSTand 4.1 with using the NewSubProperty API call on a remote system. I use it to create a StationGlobal on the fly having a named type. The TestStand configuration is identical on both machines and it includes the TypeP
-
Bug when trying to commit for the first time
I have a bug that I tried to solve but can't find any solution till now. I have a table that contains many rows and from this table I can press edit or add to open a new page that I can edit or add a new record for this view the page that contains th
-
K9N SLI Platinum MS7250 ver1.1 ... need help with Windows 7 install
Hello, Having an intermittant issue with Windows 7 32bit. During startup Windows 7 gets stuck at the logo screen. Not always though. Every 7-8th reboot it will make it past and go all the way into Windows 7. I've tried all sorts of combinations o