ODS as data source for the next ODS - can't see the name in the DS list

Hello, experts!
Need your help.  I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS.   The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS  data source name either).  I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem. 
Any suggestions?
Thank you.
Alina.

OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
In my system the screen can show more than 900... must be one of your user settings in the gui...
just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

Similar Messages

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • Data source for the concurrent program 'Send Separate Remittance Advices'

    Hi All,
    We have requirement to develop a custom report to send the remittance to the vendors.
    But we are unable to figure out on how to get the data source for the standard program 'Send Separate Remittance Advices'.
    The program is of the type Java concurrent program. Is there any way to get the XML tags for this program.
    Thanks,
    Manoj

    hi,
    pls see:
    R12 Send Separate Remittance Advice - Data Source (srini)
    and also:
    http://apps2fusion.com/apps/14-fwk/69-java-concurrent-programs
    http://oracle.anilpassi.com/xml-publisher-concurrent-program-xmlp.html

  • Problem while adding a new data source for the demo for mapviewer...

    hello,
    i use oracle 10g enterprise edition. i imported the necessary dump files and get the necessary scripts worked. i want to see the demo results in mapviewer. for that, i have to add a datasource. the XML code in order to realize this purpose is:
    <?xml version="1.0" standalone="yes"?>
    <non_map_request>
    <add_data_source
    name="mvdemo"
    jdbc_host="c-0y5wp0jvd2bf8"
    jdbc_port="1521"
    jdbc_sid="mvdemo"
    jdbc_user="!mvdemo"
    jdbc_password="tiger"
    jdbc_mode="thin"
    number_of_mappers="3" />
    </non_map_request>
    i press the submit button. then it wants me to enter a username and password. the default is admin/welcome. then i see this result on the browser:
    This XML file does not appear to have any style information associated with it. The document tree is shown below.
         <oms_error>
    Message:[MapperConfig] eşleme verileri kaynağı eklenemiyor.
    Sat Feb 26 02:29:19 EET 2005
    Severity: 0
    Description:
         at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:583)
         at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:315)
         at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
         at oracle.lbs.mapserver.oms.doPost(oms.java:409)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    </oms_error>
    by the way, the error message on the application server screen:
    05/02/26 02:29:16 INFO [oracle.lbs.mapserver.MapServerImpl] adding a map data sr
    c [name=mvdemo]
    05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] java.sql.SQLException: G/╟ istisn
    as²: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    414)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:120)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] connecting to database using jdbc
    thin driver...
    05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/╟ istis
    nas²: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    414)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:136)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/╟ istis
    nas²: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    414)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:136)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    05/02/26 02:29:19 ERROR [oracle.lbs.mapserver.core.MapperConfig] java.lang.Illeg
    alArgumentException: Error creating NativeOracleDataSource.
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:196)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    if someone could help about what to do, i would be grateful..

    when defining a data source through the admin web page, don't add '!' in front of the password.
    ! is needed only when configuring a data source in the mapViewerConfig.xml file.

  • Data Sources for the Master data of FI-CO,MM and SD from R3

    Hi Gurus ,
    Could you please tell me what are the main datasources of FI-CO,MM and SD needed from R/3 for the master data to be loaded in new implementation of BI .
    Could you please guide me step by step .
    thanks in advance ,
    Pratham

    Hi
    It varies from Client and project. But the Most common SD & MM are from LO **** pit.
    help.sap.com is the best source for this
    Hope it helps

  • Text data source for the field Position(PLANS)

    Hi Experts,
    I have an infoobject ZPOSITION which i am using in a cube for this i can able to display key values but i want to display text for this ZPOSITION. The source for this field is Position(PLANS) which i have tacken from pa0001 table.
    I have an another infoobject 0HRPOSITION for this i have already loaded data using data source 0HRPOSITION_TEXT.
    Is there any other text datasources for this field Position(PLANS)?
    And
    Is it possible to load data from one info object to another info object?
    Regards,
    Sridhar.K

    Hi Sridhar,
    Check out in the infotype PA0001 for the check table for this field. In this table you will have the description for the field PLANS (Position).
    I request you to catch hold of functional HR team member to know where the text value for the Position (PLANS) is stored. You can get the info from them immeadiatly.
    After knowing the table where the text values for Position (PLANS) are stored, you have to create a text datasource using RSO2 transaction and replicate in BW and load data from the R/3 table.
    Hope this helps you.
    Regards,
    Saravanan.

  • Data source for the Partners in Opportunity

    Hi,
    What is the data source which will get the data for Opportunities with different partners and partner functions.  I want to pull the data to bw for the partners in Sales team and Partners tab of Opportunity.
    thanks
    naveen

    Resolved

  • How to birng the data in data sources for the first time

    Dear Gurus,
    For the Personnel Development (0PAPD) i installed the datasoures  0HR_PA_PD_1, 0HR_PA_PD_2 from ECC and  checked in RSA3 I found 0 records.
    My question is any configuration should be done to bring the data into datasources. But in ECC there module is implemented and gone live long back ago, they are telling data is there in tables also.
    Regards,
    Kiran

    Hi Kiran,
    Please check with your HR functional consultant, whether the HR records are created with BW relevant infotype selected. For records to available in BW they have to maintain some infotype.
    Regards,
    Kams

  • Is it possible to use same data source for two info cube

    Hi,
    My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
    Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
    Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
    "0IC_C03".
    Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
    and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
    Pls. help.
    Regards,
    viren.

    Hi,
    You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
    In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
    Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
    Cheers,
    Kedar

  • Standard BI Data Source for FMGLFLEXT

    Hello Friends,
    The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
    Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
    Appreciate help in this regard.
    VB

    Hello,
    The requirement is resolved by the following:
    If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
    http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
    Regards,
    VB

  • Standard Data Source for FMGLFLEXT Table

    Hello Friends,
    The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
    Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
    Appreciate help in this regard.
    VB

    Hello Sasi and Kirun,
    Thanks for your reply,
    The requirement is resolved by the following:
    If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
    http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
    Regards,
    VB

  • Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP

    Hi BW Guru's
    We have install the Standard Data Targets from Business Content.  Now i want to do the same for Master Data can any one help me in selecting the relevant master data data sources for the following Data Targets.
    Your help will be appreciated.
    FI-GL
    INFOCUBE    0FIGL_C01    General Ledger: Transaction Figures   
    INFOCUBE    0FIGL_C02    Cost of Sales Ledger: Transaction Figures   
    INFOCUBE    0FIGL_VC1    General Ledger: Financial Statements   
    INFOCUBE    0FIGL_VC2    Cost of Sales Ledger:Financial Statements   
    INFOCUBE    0FIGL_C10    General Ledger (New): Transaction Figures   
    INFOCUBE    0FIGL_R10    General Ledger (New): Transaction Figures Remote   
    INFOCUBE    0FIGL_V10    G/L (New): Balance Sheet and Profit and Loss   
    INFOCUBE    0FIGL_V11    G/L (New): Balance Sheet and Profit and Loss Remote   
    FI-AP
    INFOCUBE    0FIAP_C02    FIAP: Transaction Data   
    INFOCUBE    0FIAP_C03    FIAP: Line Item   
    Thanks in Advance,
    Ganni

    AC --> AC-IO -
                                        All DataSources
    FI -->  FI-IO -
                                        All DataSources
    FI -->  FI-AR --> FI-AR-I0 -
                        All DataSources
    FI --> FI-AR -
                                         0FI_AR_4, 0FI_AR_10,0FI_AR_6
    FI --> FI-AP --> FI-AP-I0 -
                         All DataSources
    FI --> FI-AP -
                                         0FI_AP_4, 0FI_AP_6
    FI --> FI-GL --> FI-GL-I0 -
                         All DataSources
    FI --> FI-GL -
                                         0FI_GL_10
    LO--> LO-IO -
                                   All DataSources
    SD--> SD-IO -
                                         All DataSources
    SAP-R/3-IO -
                                         All DataSources
    PI-BASIS--> 0CA_GD --> 0CA_GD-IO ---     All DataSources

  • Data Source for Table CRM_KNVH_TEMP

    Hello Experts,
    I have an issue related to the Hierarchy of Partner number. I have checked the data source like :-
    0CRM_BP_SALES_HIER
    0BPARTNER_HIER
    in the 0BPARTNER_HIER hierrachy, i didnt get the required data but in hierarchy 0CRM_BP_SALES_HIER there is the required data but when i executes the info package, it throws an error message of duplicate records. please tell me that how can i handle the duplicacy in the hierarchy. is there any data source for the table CRM_KNVH_TEMP so that i can directly use that Hierrachy DS for the info object
    also let me know whether it is possible if i can use the data souce 0CRM_BP_SALES_HIER in the info object 0BPARTNER.
    Thanks in advance
    neha

    Hi Pradeep,
    Please also check the following link,
    http://help.sap.com/saphelp_sm40/helpdata/EN/ab/bcc99b16db422e86af45b659712912/content.htm
    Regards,
    Amit

  • Data Source for reused bounded task flow

    Hi,
    I am using JDeveloper 11.1.2.4.0.
    I have a project from which I exported a bounded task flow to be used in other projects.
    When I include that bounded task flow in a separate project, its data source does not appear in the Databindings.cpx of the project in which it is reused.
    How will the data source for the reused task flow be set in the separate project?

    I have a project from which I exported a bounded task flow to be used in other projects
    By that you mean that you have crated a adfLibrary from the the task flow?
    When I include that bounded task flow in a separate project
    By that you mean you have added the adfLib created above to the other project from the resource palette, right click and 'add to project'?
    How will the data source for the reused task flow be set in the separate project?
    Once you have added the project you refresh the data control and the other task flow should show up.
    Timo

  • Data source for reports

    hi all,
    we r using 10g application server along with the reports service to deploy J2EE application
    The data source for the application is specified using the JNDI lookup
    Is it possible to use the same strategy for reports as well.
    i.e., we are using jdbcpds. so is it ok if i give the JNDI look up name as P_JDBCPDS
    If not is there any other way to make the P_JDBCPDS connection generic, so that i can change the username and database name without having to change the cgicmd.dat file
    Any help is greatly appreciated.
    Thanks & regards,
    Ramakrishna

    If it is intended to be accessible from Reports servlet then you can use "ssoconn" command line option where by the user name and password is stored in OID (Oracle Internet Directory)
    Pls see publishing reports to web document --> command line options -> rwservlet
    (link below)
    [    All Docs for all versions    ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    ---------------------------------------------------------------------------------

Maybe you are looking for