ODS data activation error system SAP BI 7.0

Hi Gurus,
I am carrying out full load in a standard ODS.
When I try activating the request,system is giving me the error message as given below.
No SID found for value '%' of characteristic 0COND_CURR.
I have also tried the option of transfer global settings in RSA1->source systems.
Please help in this regard.

Hello Gurus,
Issue resolved
For my requirement i changed info object 0currency -> General Tab page -> Transfer routine -> Created and written a code as follows
If result = '%' .
result = 'USD'.
endif.
This resolved my ODS data activation issue.
Thanks a lot for all your help.

Similar Messages

ODS data activation failure

Hi
My ODS data activation is failing the following is the dump message i got
Runtime Error DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
Regards,
Nikhil.

Could be a tablespace full.
Check in transaction DB02 the PSAPSEMODS
Or in alternative could be an error in the partition of the PSA related. Check in transaction RSRV the task
"Consistency Between PSA Partitions and SAP Administration Information"
You can adjust the table directly with the task in RSRV.
Regards,
Sergio

ODS data Activation with error BRAIN060

Hi guys,
I have the next situation with the data activation in a ODS. The ODS have the extraction completed, but when I try to do the manual activation a error BRAIN 060 is caused:
1st.:
Error getting SID for ODS object ZPUR_OP
Message no. RSM1187
2d:
Value 'AYD CALPDS' (hex. '415944A043414C504453') of characteristic 0COORDER contains invalid characters
Message no. BRAIN060
Diagnosis
The following standard characters are valid in characteristic values as default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 415944A043414C504453).
3st:
Error when assigning SID (details in long text)
Message no. RSDRO303
System response
Request: REQU_4C4G67RXIW7C3PV88B1BMB4ZX
Data package: 000795
Data record: 12.153
InfoObject: 0COORDER
The error is the master data and the assigment SID; but the extraction did without PSA; only datatarget. With this I can´t modify the data erroneus.
Is possible force the activation or I can apply other correction that not be repeat the extraction?
Please,I need your quick collaboration.
Regards,
Jeysi

Hi Jeysi,
You can make the changes in ODS. If this request is not activated yet, in this case this data is available in your New Table of the ODS. You can make the changes in this data directly in this new Table.
After doing this changes it will allow to activate this request. Also you can find this New Table in object configuration.
Or
Go to Manage of ODS -> Go to Contents TAb-> In this Button at bottom with New Data. Please go through this and make the changes in New Data.
But prior doing this changes please check / analyse the reason correctly as per business requirement. Suggest them to take care of this in future to end users.
This will deffinately helps you.
Regards,
Mahesh

ODS data activation problem

Hi,
I have to load description from the flat file into the ODS since the ODS data needs to be a replica of the flat file.
As the description is greater than 60 CHAR, I have split the description into 3 infoobjects in the transfer rule, using the individual line routine.
After data is loaded into the ODS, the technical status as well as the total status is green, but when I activate the request for that corresponding load, the activation fails i.e. the data is present in the 'New Data' table, but it is not moving into the 'Active Data' table.
Then, I tried a different method.
I activated the setting in the ODS; 'Activate ODS object data automatically' and tried to load the same data with the same conditions to the ODS.
This time the loading failed, giving multiple errors like;
1) Value 'Absence Transactrion Dataload Failure ' (hex. '416273656E6365205472616E7361637472696F6E204461.
2) Value 'ifying days ' (hex. '696679696E672064617973 ') of characteristic Z_LDES2 contains invalid cha.
3) Activation of data records from ODS object DES3_ODS terminated.
4) System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE.
5) Error getting SID for ODS object DES3_ODS.
6) Error when assigning SID (details in long text).
7) Error when assigning SID (details in long text).
Please provide a solution for this.
<b>*********Points will be rewarded*********</b>

Hi Praveen,
Thanks for the soltion.
I checked in RSRV. There were no errors.
So, I tried loading the data again. This time, I got the same error.
But when I checked the contents of the Active table of ODS, the data was loaded, although in RSMO the status was RED.
The laoding was successfull as of now, but lets hope this problem doesnt occur again.
Please help, if you have any idea regarding this problem.

DDIC Activation error for SAP HR SP 23

Hello,
We have installed ECC 6.0 SR3 with DB2 as database and HP UX OS.
When I am updating HR Software component to SP23, it gives an DDIC Activation error. After checking the logs, "Table Type HRPP_T_PPDIT_HASH could not be activated" was displayed.
Did a consistency check on table PPDIT, which said it was consistent.
Kernel level is latest 185. R3 trans and Tp is also latest.
Kindly help.
Regards,
Sagar

Hi
Please check the following SAP Notes
Note 672651 - OCS: Known problems with Support Packages in Basis Rel.6.40
Note 573044 - Unicode conversion for HR application
Regards
Chen

Error in ODS data activation

Hi
I have a data source which is made from a excel file.
when i load the data from the datasource to the ODS the data is loaded is success full.
But when i try to activate the data it is showing error
the error is
There are more than 10 char. values that could NOT be assigned a SID
can any body help me
thanks in advance

Hello ,
Change your Characteristics length size in your Info Object Char catalog.
I think Length mis-match between your Data Source and Characteristics.
Regards,
MaNo

SAP BW - Data activation error

Hi,
I have loaded arround 3 million records into 0FI_GL_4 datasource and everything is ok in PSA but when I am activating the loaded data into DSO I am getting an strange error on some characters in a Text field . Unfortunately I can't realize in which packet(s) in PSA error is and it's not in the packet I see in the error log.
I am not sure if it's a good idea to extend the valid characters list or not and how can I do this. By the way, loading this size of data and activating it taks me 1.5 hourse. Is there any way to load just a part of data to check which part of data cause the error?
<<Text removed by moderator>>

Hi,
Please check why you are getting this error.
There can be number of possibility.
1.Special character are coming
Please in RSKC put Capital_all.
2.If small letter are coming then either allow the small
character or write a routine to convert it into upper case.
Otherwise delete the request from data target and correct it in psa and laod it.
If you want to break the load in seperate part then please Run the DTP with filter and
Give different condition ie some date ranges.
Thanks,
saveen kumar
Edited by: saveen kumar on Nov 11, 2010 10:34 AM

Mass Activity - Error in SAP CPS

Hi guys,
I am trying to run a mass activity from SAP CPS in the ISU system. I imported the mass activity - 0004, the posting and the document date had to be changed dynamically, so I created a parameter set as shown here.
Created a job to copy parameters(these two parameters only). Ran the job, the parameters are created and copied to target id FPMA5
Created a copy of the job SAP_MassActivityTemplateRun -> Used the Target ID as shown and date as today.
So, I am consuming the Identification FPMA5 from the previous job run here. Tried to run it, getting the below error in the SAP CPS system.
com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5]
BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5] [RAISE_EXCEPTION, {00,341}, Runtime error & has occurred, [0004,K2,26.05.2014,FPMA5]]
Parameters:
0004
2014-05-26
FPMA5
X
        at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:727)
        at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:533)
        at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:310)
        at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:147)
        at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:481)
        at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:303)
        at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
        at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
        at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityRunCommand.startMassActivity(AbstractMassActivityRunCommand.java:264)
        at com.redwood.scheduler.connector.sap.rfc.command.impl.MassActivityTemplateRunCommand.doExecute(MassActivityTemplateRunCommand.java:50)
        at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityCommand.execute(AbstractMassActivityCommand.java:67)
        at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:84)
        at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:57)
        at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:136)
        at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
        at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:76)
        at java.lang.Thread.run(Thread.java:722)
I now added other parameters into the parameter set, maintained them in the COPY_Parameter job. Even then I get the same error!
I believe my problem is this - I am able to copy the parameters, but passing them to the Mass activity is somehow failing(I am using the MASS_ACTIVITY_TARGET_ID field output from Copy parameters to MASS_ACTIVITY_ID, which I believe is wrong. But I want to use the copy parameter job's output in the mass activity template run). Please let me know.
I followed this guide: Importing and Running Mass Activities - SAP Central Process Scheduling by Redwood - SAP Library
Thanks and regards,
Pavan

Hi Pavan,
To create a job chain-level parameter, proceed as follows:
Go to Definitions > Job Chains and choose Edit on your job chain
In the job chain editor, click on the Parameters tab
Click Add, fill in Name, for example MASS_ACTIVITY_DATE, fill 0 into Display Order.
In default expression field, fill =Time.expressionNow('truncate day add 3 days')
Make sure Display is checked, click Save
Submit the job chain, you will notice that the date is as expected, cancel the submit.
In the job chain, go to the job for which you want to set the parameter and choose Reference, select the job chain parameter.
The above will use the date at submit time + 3 days, if you want to use the runtime date, when the job chain starts, you disable Display and enable Runtime, remove 'add 3 days'.
Hope that helps.
Regards,
HP

DSO Activation error in SAP BI 7.0

Hi all,
I am trying to activate a DSO which is created by me in SAP BI7.0.When I save the DSO it didn't placed any error even when I clicked Check it dispalyed as consistent.But When I clicked activate it placed an error saying the DSO cannot be actvated.
1.The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
2. Error when opening an RFC connection
Message no. RSAR051
3.Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
4. Error when activating DataStore Object
Message no. RSO404
I have tried to check the RFC connection in SM59 but I didn't find anything.If we need to create an RFC connection then please let me know the steps.This activation of DSO is very important as it is stopping all the work.Please suggest me what Steps need to be taken now as this is very important.
Regards
D

in SM59 double click your XYZ destination,might have to correct the IP address in SM59
perform a "test connection"
if not fine then check the target host, system number and name/ip and modify them accordingly; don't forget that this is MyBW system you have to maintain actually your XYZ host details.
if the test went through, the next is to test authorizations: menu test, authorizations. Check tab logon/security settings; you should use ALE as user... you need to know this pwd if you change it!. Check if this user is not locked.
Hope it Helps
Chetan
@CP..

Error in SQL Statement (ODS data loading Error)

Hello Gurus...
I am trying to loading the data Info Source To ODS in my ODS Key Figure Z_IVQUA (Invoice Quantity)
is getting the Error Message Data shows 0 from 0 Records.
I was Remove the Key Field from ODS Then try to load the data but i am getting same Error..
Error in SQL Statement: SAPSQL_INVALID_FIELDNAME F~/BIC/Z_INVQUA
Errors in source system
Please Suggest....
Thanks
Prakash

Hello All...
Really appreciate if you can give me some advise. Thanks.
Prakash
Edited by: Prakash M on Jan 14, 2009 2:14 PM

Master Data activation error after transport

Hi,
we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Any suggestion?
Thanks
Alberto

we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
I tryed to re-transport but i have always the same error.
I already gave you option-1 above. Here is my thinking.
Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
ext, run the RSRV test on the InfoObject in DEV.
After you do this, collect this InfoObject in a new transport and move it to Test.
I am not sure it wil solve the problem, but its worth a try.
But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
Uday-Ram Chamarthy

Dso data activation error

Hi experts,
During the activation of data in DSO I got an error, there is an invalid entry. There are almost 15 million records in this DSO I dont want to reload and activate them again because I am on quality server. I just want to keep these records as much as are active and want to report on them. I cannot change the request status to green as we do it in Cube. How can it be done.
regards,
ray

Check the quality status of the request. and also verify the number of records added to Active table as this for UAT or testing purpose.
Other wise just delete the data from DSO and filter out the invalid entries and then reload the data. or Load a selected data for one or two years for the testing purpose.
Hope this helps.
Regards,
Reddy

Urgent| Master data activation error

Hi All,
I am getting error in activating the master data. The error is in filling the SID tables.
Actually I have added a new attribute in Master Data, now i want to make it as navigational attribute. But when i try to activate my master data it gives an error.
But if we try to activate master data without making it was navigational (i.e. keeping as only display) the master data gets activated.
Please help me in this as it is very urgent.
Regards,
Kshitij

Hi,
If your attribute characteristic you want to make NAV is brand new, first try to maintain its master manually with a value; activate the master data.
then try to reactivate your NAV in the other characteristic.
If this still doesn't work try the following
1. keep the attr as display for the moment
2. via menu Extra / DB Tables in RSD1, Fill attr SID table
3. reactivate the IOBj
hope this helps...
let us know...
Olivier.

ODS NOT ACTIVATED ERROR MESG

The creation of the export DataSource failed
Message no. RSBM035
HI,
PL HELP,
Diagnosis
The creation of the OLTP source &v1& was unsuccessful.
System response
Whilst generating the Export InfoSource, the Metadata for an R/3 OLTP source must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
@5C@ RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
@5C@ Error when creating the export DataSource and dependent Objects

Hi!
At least we have now the source of your problem. If you have a basis guy (or team), ask him to look after this.
There can be a lot of simple reasons for this problem: system is done (e.g. for offline back-up), system is overloaded (e.g. because of performance test), router dumped...
If you know this system and can logon yourself, you could check for some problems - but best would be to ask your local system administration.
Regards,
Christian

Data activation error in LO

Hello
after i have gone thru t-code LBWE.. i clicked on maintaince tab.. then update overview is done.. after that i clicked on bw delta maintance queue.. there i didnt find any data sources over there..

hi,
it's likely that there aren't any entries there yet because you haven't initialized extraction of any deltas from BW. you must first extract a datasource in BW with the option 'Initialize Delta' in the infopackage.
ryan.

ODS data activation error system SAP BI 7.0

Similar Messages

Maybe you are looking for