ODS data activation failure

Hi
My ODS data activation is failing the following is the dump message i got
Runtime Error DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
Regards,
Nikhil.

Could be a tablespace full.
Check in transaction DB02 the PSAPSEMODS
Or in alternative could be an error in the partition of the PSA related. Check in transaction RSRV the task
"Consistency Between PSA Partitions and SAP Administration Information"
You can adjust the table directly with the task in RSRV.
Regards,
Sergio

Similar Messages

ODS data activation error system SAP BI 7.0

Hi Gurus,
I am carrying out full load in a standard ODS.
When I try activating the request,system is giving me the error message as given below.
No SID found for value '%' of characteristic 0COND_CURR.
I have also tried the option of transfer global settings in RSA1->source systems.
Please help in this regard.

Hello Gurus,
Issue resolved
For my requirement i changed info object 0currency -> General Tab page -> Transfer routine -> Created and written a code as follows
If result = '%' .
result = 'USD'.
endif.
This resolved my ODS data activation issue.
Thanks a lot for all your help.

ODS data activation problem

Hi,
I have to load description from the flat file into the ODS since the ODS data needs to be a replica of the flat file.
As the description is greater than 60 CHAR, I have split the description into 3 infoobjects in the transfer rule, using the individual line routine.
After data is loaded into the ODS, the technical status as well as the total status is green, but when I activate the request for that corresponding load, the activation fails i.e. the data is present in the 'New Data' table, but it is not moving into the 'Active Data' table.
Then, I tried a different method.
I activated the setting in the ODS; 'Activate ODS object data automatically' and tried to load the same data with the same conditions to the ODS.
This time the loading failed, giving multiple errors like;
1) Value 'Absence Transactrion Dataload Failure ' (hex. '416273656E6365205472616E7361637472696F6E204461.
2) Value 'ifying days ' (hex. '696679696E672064617973 ') of characteristic Z_LDES2 contains invalid cha.
3) Activation of data records from ODS object DES3_ODS terminated.
4) System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE.
5) Error getting SID for ODS object DES3_ODS.
6) Error when assigning SID (details in long text).
7) Error when assigning SID (details in long text).
Please provide a solution for this.
*********Points will be rewarded*********

Hi Praveen,
Thanks for the soltion.
I checked in RSRV. There were no errors.
So, I tried loading the data again. This time, I got the same error.
But when I checked the contents of the Active table of ODS, the data was loaded, although in RSMO the status was RED.
The laoding was successfull as of now, but lets hope this problem doesnt occur again.
Please help, if you have any idea regarding this problem.

ODS data Activation with error BRAIN060

Hi guys,
I have the next situation with the data activation in a ODS. The ODS have the extraction completed, but when I try to do the manual activation a error BRAIN 060 is caused:
1st.:
Error getting SID for ODS object ZPUR_OP
Message no. RSM1187
2d:
Value 'AYD CALPDS' (hex. '415944A043414C504453') of characteristic 0COORDER contains invalid characters
Message no. BRAIN060
Diagnosis
The following standard characters are valid in characteristic values as default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 415944A043414C504453).
3st:
Error when assigning SID (details in long text)
Message no. RSDRO303
System response
Request: REQU_4C4G67RXIW7C3PV88B1BMB4ZX
Data package: 000795
Data record: 12.153
InfoObject: 0COORDER
The error is the master data and the assigment SID; but the extraction did without PSA; only datatarget. With this I can´t modify the data erroneus.
Is possible force the activation or I can apply other correction that not be repeat the extraction?
Please,I need your quick collaboration.
Regards,
Jeysi

Hi Jeysi,
You can make the changes in ODS. If this request is not activated yet, in this case this data is available in your New Table of the ODS. You can make the changes in this data directly in this new Table.
After doing this changes it will allow to activate this request. Also you can find this New Table in object configuration.
Or
Go to Manage of ODS -> Go to Contents TAb-> In this Button at bottom with New Data. Please go through this and make the changes in New Data.
But prior doing this changes please check / analyse the reason correctly as per business requirement. Suggest them to take care of this in future to end users.
This will deffinately helps you.
Regards,
Mahesh

Error in ODS data activation

Hi
I have a data source which is made from a excel file.
when i load the data from the datasource to the ODS the data is loaded is success full.
But when i try to activate the data it is showing error
the error is
There are more than 10 char. values that could NOT be assigned a SID
can any body help me
thanks in advance

Hello ,
Change your Characteristics length size in your Info Object Char catalog.
I think Length mis-match between your Data Source and Characteristics.
Regards,
MaNo

No msg from process chain on ODS activ failure

All,
We are loading and activating a CRM ODS (0CRM_PROH) in a process chain. The process chain is set up to deliver a message if the ODS activation fails, but this is not happening reliably.
For instance, yesterday a hex character came over from the source system causing ODS activation failure. Strangely enough, the overall status of the request in the monitor was green. Also, the activation step in the RSPC planning view was blue, not red as I would expect. You could really only see the failure by switching to log view in RSPC, where it was clear the ODS activation had failed.
Any thoughts on why the overall status of the request is green instead of red or yellow when the ODS activation fails? Or, any thoughts on why no message is going out? It's probably obvious that I'm new at interpreting the RSPC screens, so any general references on this topic would be helpful.
Thanks,
Bob
P.S. The ODS in question is set for automatic activation and automatic updating of data targets. We are running BW 3.10.21, BI_CONT 3.30.16.

Hello Diane
We also had this issue, but with an older version (30B patch 7, works OK w/ patch 14).
Anyway, to fix it:
- create a new variant (let's call it V1 as an example) for the SAP program RSODSACT1
- in your process chain, insert an ABAP call after the ODS load. Punch it RSODSACT1 as program and V1 for the variant
It worked for us
Good luck
Ioan

Error in Activation of ODS Data

Dear All,
I am getting this error msg while activating ODS Data, It says its not able to execute one of this statements while activation
Program Name: GPBUJ6PU7X5TA8TLJSDOPVSU2Z7
The program terminates at this line
Types corresponding to Change-Log-structure
l_s_chgdata TYPE /BIC/B0000103000,
The DDIC does not have an table name by /BIC/B0000103000 which the program is trying to refer, Kindly do provide me your help and input on this.
Thanks.
Fayak.

Hi Siggi,
Thnx for your reply, I did as suggested by you, activated the ODS and update rules again but it was not able to activate the data again I ran the RSRV as suggested by you i got an list of errors
Test for Activation Program
Active generated load program not available
Activation Program is not Current
Lines in temporary program: l_s_chgdata TYPE /BIC/B0000103000
Activation program has to be generated again
I ran the correct error but not to any avail, could you kindly guide me on this, I was previously loading data to this ODS successfully from a 300 client now I am trying to do this from an 400 client and I am facing this error.
Thanks,
Fayak.

Error during activation of ODS data

Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.

Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful

Error Activating the ODS data

Hi Guys,
I am facing an error while activating the data in the ODS.
The data is loading perfectly fine but when activating the ODS data the following error is coming
Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
System error occurred (RFC call)
No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )
This is happening after we had a BWQ refresh .
I thought this has something to do with the BASIS guys but they say they checked everything.
Need Help

Hi Sidhu,
There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
I checked the RESREQDONE table but I dont see these requests in there.
I checked the SM58 there I saw a lot of errors
ALEREMOTE RSAR_TRFC_DATA_RECEIVED BWQCLNT641 10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW
one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
Regards
Majeed

Data activation in ODS taking too long

Hi gurus,
I have loaded data into PSA. From there I have loaded this data into ODS. However, the data is not being activated. So, I have to do manual activation on it.
The problem is, I have to wait for a very long time. I started the data activation about 1 hour ago. My data records have 1.5 million lines.
In SM37 the log shows the following messages:
05.02.2007 12:13:37 Job started                                                                       00           516          S
05.02.2007 12:13:37 Step 001 started (program RSODSACT1, variant &0000000000061, user ID XXXXX)      00           550          S
05.02.2007 12:13:49 Activation is running: Data target ZFIGL_O2, from 1,553 to 1,553                  RSM          744          S
05.02.2007 12:13:49 Data to be activated successfully checked against archiving objects              RSMPC         153          S
05.02.2007 12:13:49 SQL: 05.02.2007 12:13:49 S12940                                                  DBMAN         099          I
05.02.2007 12:13:49 ANALYZE TABLE "/BIC/AZFIGL_O240" DELETE                                          DBMAN         099          I
05.02.2007 12:13:49 STATISTICS                                                                       DBMAN         099          I
05.02.2007 12:13:49 SQL-END: 05.02.2007 12:13:49 00:00:00                                            DBMAN         099          I
05.02.2007 12:13:49 SQL: 05.02.2007 12:13:49 S12940                                                  DBMAN         099          I
05.02.2007 12:13:49 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>                                 DBMAN         099          I
05.02.2007 12:13:49 'SAPBWP', TABNAME => '"/BIC/AZFIGL_O240"',                                       DBMAN         099          I
05.02.2007 12:13:49 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL                                   DBMAN         099          I
05.02.2007 12:13:49 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,                                          DBMAN         099          I
05.02.2007 12:13:49 GRANULARITY => 'ALL', CASCADE => TRUE ); END;                                    DBMAN         099          I
05.02.2007 12:13:56 SQL-END: 05.02.2007 12:13:56 00:00:07                                            DBMAN         099          I
It stuck there at SQL-END for some time...
Is this normal? How can I improve the performance for my data loading & activation?
Thank you very much.

Hi Ken.
Many thanks for your input. I think I will follow what have been suggested in the note as follow.
+     4.      Activation of data in an ODS object
To improve system performance when activating data in the ODS object, you can make the following entries in Customizing under Business Information Warehouse ® General BW Settings ® ODS Object Settings:
the maximum number of parallel processes when activating data in the ODS object as when moving SIDs
the minimum number of data records for each data package when activating data in the ODS object, meaning you define the size of the data packages that are activated
the maximum wait time in seconds when activating data in the ODS object. This is the time when the main process (batch process) waits for the dialog process that is split before it classifies it as having failed.+
However, can someone advises me what would be an optimum / normal value for
1. the maximum number of parallel processes
2. the minimum number of data records for each data package
3.the maximum wait time in seconds?
Many thanks.

Data activation problem at ODS

Hi All,
     I am not able to load the purchasing data 2lis_02_scl (init load) in to ODS, Actually I am getting error message at data activation in ODS level.
The error messages are
1. Activation of M records from DataStore object ZP2_PSCL terminated
2. Error during confirmation of process 000001
3. Caller 09 contains an error message.
4. A caller 01, 02 or equal to or greater than 20 contains an error meesage.
5. The material PBG600 does not exist or is not activated
There is no material with that name in BW as well as R/3. And below I am giving the job log details of ODS activation.
Job started
Step 001 started (program RSODSACT1, variant &0000000060772, user ID U6X9539)
Activation is running: Data target ZP2_PSCL, from 1,572,117 to 1,572,117
Overlapping check with archived data areas for InfoProvider ZP2_PSCL
Check not necessary, as no data has been archived for ZP2_PSCL
Data to be activated successfully checked against archiving objects
SQL: 06.06.2007 09:09:48 U6X9539
BEGIN DBMS_STATS.FLUSH_DATABASE_MONITORING_INFO;
END;
SQL-END: 06.06.2007 09:09:49 00:00:01
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_461J7HV0XMIXCCH1SE9VX63A6 with ID
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_461J7HV0XMIXCCH1SE9VX63A6 with ID
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
Activation started (process is running under user U6X9539)
All data fields updated in mode "overwrite"
Process started
Error during confirmation of process 000001
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_461J7HNCENX7TPXLMK7JN44KE data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object ZP2_PSCL terminated
Activation is running: Data target ZP2_PSCL, from 1,572,117 to 1,572,117
Overlapping check with archived data areas for InfoProvider ZP2_PSCL
Check not necessary, as no data has been archived for ZP2_PSCL
Data to be activated successfully checked against archiving objects
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
Activation started (process is running under user U6X9539)
All data fields updated in mode "overwrite"
Process started
Error during confirmation of process 000001
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_461J7HNCENX7TPXLMK7JN44KE data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object ZP2_PSCL terminated
Activation of M records from DataStore object ZP2_PSCL terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Please help me on this issue.
Regards,
PRK

Hi,
   Thanks to all, After loading the master day I am trying to load the transaction data for purchasing information.
   Right now the data at ODS is not activating and is showing the two below error message.
Error Message
1. Activation of M records from DataStore object ZP2_PSCL terminated
2. Error during confirmation of process 000001
   Please help me on this issue.
Regards,
PRK

Data Plan Activation Failure after I updating to 8.0.2

After I updated my Ipad2 to 8.0.2, I have not been able to use my cellular date. It keeps "searching" for connection and then pops up "Data Plan Activation Failure". What do I do?

I turned gmail off and turned on iCloud email. It won't load either.

Data load - Failure Scenarios

Can anyone please explain in detail on how to handle this DATALOAD issues. I would like to understand for following scenario in BI 7.0 and R/3 4.6c
1) R/3 --> PSA --> DSO --> CUBE
So, there are one infoPackage and 2 DTP's are involved.
Let us take take a scenario, Please explain me in detail (Steps), on how to fix the LOAD, if the LOAD failed in R/3 --> PSA or PSA --> DSO or DSO --> CUBE.
I would appreciate your help in advance and points will rewards, of course.
BI Developer

Hi.......
1) Generally load fails in R/3 --> PSA due to RFC connection issue......You can check the RFC connection SM59.....
If it fails........you can make the status red.....and delete the failed request from PSA........again load it........
2) Load from PSA to DSO may fail due to many reasons....
a) Lock issue...>> in this case you can check the lock in SM12........wait for the lock get released...........then make the QM status red......delete the request from the target..again repeat the load............
Or may be due to locked by change run........in this case also after the completion of ACR....you have to repeat the load..
b) load failed because last delta failed.........In this case first you have to rectify the last delta.........then repeat this load....
3) DSO --> CUBE.........a)here also the load may fail due to lock issue...in this case also you have to delete the request from the target.after making the QM status red........then lock get released you have to repeat the load.......
b)while loading data from DSO to infocube , the dtp run failed due to short dump.The error anlysis gives description as DBIF_RSQL_SQL_ERROR,
This error is usually seen when the table behind ODS is getting updated from more than one source system simultaneously. Here the data packets from more than one request contain one or more common records. This gives rise to deadlock while updating inserting records into the ODS table and subsequently a short dump is encountered leading to the failure of one request. The solution is to cancel the loads and run them serially. A possible long term solution is to load the data up to the PSA in parallel and then load the ODS table from the PSA in serial. (Here change the InfoPackage to option PSA only and tick Update subsequent data targets).
Solution
It may be possible that the job is set up in such a way that the activation of data in the ODS takes place only after data is received from all four regions. Thus, if the failing request is deleted the correct requests will also be deleted. Hence it is required to change the status of the failed job from red/yellow to green, activate the ODS data and then re-start the load from the (failing) source after correction of any possible errors.
c) while loading the active data that is in the first ODS into a cube - it fails with the following error.
err #1 )Data Package 1 : arrived in BW ; Processing : Error records written to application log
err #2 ) Fiscal year variant C1 not expected
Sol : 'GO to SPRO, SAP Customizing guide
Open the tree:
SAP Netweaver
SAP Business Information Warehouse
Maintain FIscal Year Variant
Hope this helps you.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Sep 24, 2008 8:47 PM
Edited by: Debjani Mukherjee on Sep 24, 2008 8:53 PM
Edited by: Debjani Mukherjee on Sep 24, 2008 8:54 PM

Special character '#' ODS data upload

Hi experts!!
I have to load R/3 data from PSA to ODS. I have found problems during data load with 0postxt field (description field) because in several FI documents there is '#' inside the text field, for example: "COMPANY X FOR # SALES".
The PSA is upload fine but when the system tries to activate ODS data, it gives me an error in this register.
I have checked RSKC transaction and it is defined '#' character as a permited character:
ÇÉÀÇÊÈÏÌÅÉÒÙÁÍÓÚÑÑÈÍÌÓÒÚÙÉÈÍÌÓÒÚÙ·.'#
What else can I check?
Thanks a lot for your help.
Kind regards,
GP

Hi,
It may not be because of that.
SID error comes during activation of ODS because the related MD is not available for assigning SIDs.
Whenever Master Data is loaded SID's are generated for those Master Data records.
Now when you load Transaction Data these SID's will be used (for the records which use above master data values). This results in performance gain.
If Transaction Data is loaded first than the system checks for SID's. If they are not available system generate SID's. This results in a loss of performance.
Now in the case if you don't have the setting selected (Further Processing Without Master Data/Always update data, even if no master data exists for the data) system will throw error No Sids found and load will terminate.
So as a first step ensure that the related master data is loaded and Attribute change run has been triggered.
OR
Load the MD and Activate the MD (Modeling > InfoObject > Search the Infoobject > Right click > Activate Master Data)
Once you perform this you can retrigger the activation. It should work fine.
Else as a workaround you can blank out these particular values and activate.
There is also one more workaround wherein you can create the Master data entries directly in BW itself. But both the above step should be done after consulting Business and considering data volume that needs to be edited/created.
In most case once you perform the loading and activation of MD your activation should work fine when repeated.
OR
In the infopackage goto Update Tab and make the setting Update the records even if no master data exist and reload
This may work.
Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
Thanks,
JituK

Error in deletion of ODS data

Hello Gurus,
We have three ODS's in our project to which we will do daily loads.
Before full upload we will delete all the present from the ODS's. The deletion process we will do automatically using process chains.
It was working fine. but from the past week we are getting an error while deleting ODS data. ITAB_DUPLICATE_KEY - Error, Please explain me why we are getting such error and how to rectify it.
We tried to delete the requests manually one by one from ODS.
The data is deleting from the Active table but still it is showing that request in the Manage screen of ODS.
How to rectify this error. kindly give me some inputs.
Regards,
Ala.

Hi,
In the BW server you can try one of the report program to delete the entire requests in infocube or ods.
Report program is RSDELPART1
Just run this report program in se38.
In the selection screen of the program,give the name of the data target from where you need to delete all the existing requests.
This technique was once used.
Please let me know whether it works.

ODS data activation failure

Similar Messages

Maybe you are looking for