ODS & Datamart Problem(A.H.P/Roberto/Bhanu Gupta/Anyone)

Hi Experts,
We have an ODS for which we have data in Active Data but not able to see it in <b>Change log</b>. When we click on generate export data source, we get a short dump.
What might be the problem. Kindly suggest.
Appreciate immediate response.
Thanks & Regards
Sajeed

Hi Raj,
Thanks for early response.
We have activated it. Otherwise how is it available in Active Data.
Any other thoughts.
Regards
Sajeed

Similar Messages

  • Trying to down load but get error message.... "there is a problem with the Windows Installer Package" Does anyone know how I fix this??

    "there is a problem with the Windows Installer Package" Does anyone know how I fix this??
    My itunes ends up being so out of date becuase I can never upgrade it.
    I have a sports kit and want to make sure I am using the most uptodate version
    I managed to delete the old version, just in case it was the fact it was about 10 versions out of date that was the problem but now I can't reinstall it at all......
    Please help

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

  • Hello THIS IS RAZA I GOT A MACBOOK PRO I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks Screen Shot 2015-03-21 at 10.

    Hello
    THIS IS RAZA
    I GOT A MACBOOK PRO
    I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks

    This is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
    http://www.adwaremedic.com/index.php

  • Problem in tutorial and zip file. can anyone file it or correct it..

    hi jdev experts,
    am using jdev11.1.1.5.0.
    when am new to these webservice. i followed this tutorial
    http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html
    url wsdl link when use that wsdl.
    throws some error.
    what is the reason john says. ok at second post of the thread.
    Consuming a Web Service from a Web Page
    so if i change the wsdl means and somethings has to be changed in tutorial steps.
    if any newbie crossing this tutorials feels very difficult to work. so can change the wsdl url link and those steps.
    and another thing I installed 11.1.2.0 and download that zip file in that tutorial and i run throws the same error.
    so. problem in tutorial and zip file. can anyone file or correct..
    i think think this is the right place to tell this. or else re-direct me.

    this is to arun.
    As the exception stack clearly mentions that the endpoint is moved, it is up to the users to make use of any other webservice.trace says link is moved i know.
    thing am here is:
    please make note on that tutorials.
    * note :- just like this consume some other external webservices. dont use this webservice this webservices link is broken.
    this what saying.
    this to john.
    thanks. thanks again.

  • HT4623 I keep getting an error message "cannot connect to the internet."  Is this a problem with my internet provider, or has anyone else had this problem.

    I keep getting an error message "cannot connect to the internet."  Is this a problem with my internet provider, or has anyone else had this problem.

    I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
    If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
    Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

    Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

    Many thanks Deggie! I think my iPad has a big problem because is not possible to restore it....I downloaded the most upgraded version of iOS but  when I try to restore an error message occurs (4005)......

  • ODS Activation Problem - Error getting SID

    Hi All,
    I am facing the problem while activating the request,
    "Error getting SID for ODS object xxxx.i know lot of threads are there in forum but those all are taking about while loading the data to ODS,Here i loaded the data into my first ODS(here fine) and then transferring the data to another ODS while activation of Data in second ODS i am getting problem.the second ODS checked the Bex reporting.
    If masterdata not existis then it can be a problme in my first ODS but i didn't face any problem in First ODS.First ODS loaded the data from R/3 and second ODS using the datamarts.
    Any ideas how to solve this problem.
    Thanks,

    Use Tcode RSRV  Tests in Transaction RSRV  All Elementary Tests  ODS Objects  Foreign Key relationship of reporting-relevant ODS object and SID table characteristics (Dbl Click)
    From the right side window, expand u201CForeign Key relationship of reporting-relevant ODS object and SID table characteristics & Enter second ODS name, and click u201CTransferu201D
    Now, click u201CExecuteu201D (Toolbar)u2026 and check whether the results displayed in green icon..
    Otherwise, go back and click u201CCorrect erroru201D (Toolbar)...then try to activate second ODS

  • ODS Activation Problem (with SIDS) BIG PROBLEM !!!

    Hi
    Ok we have a situation in our project but first a few facts: -
    1: For ODS we do not use keys but have a infobject that creates a unique ID for each entry with a bit of ABAP in the update rule (yep not very good I know but too many to change now)
    2: The SID table keeps growing so we have deleted it four or five times with SE14.
    Now I am not sure if these are related to our problem as we have used SE14 before and it hasnt created prolems??
    THE PROBLEM
    Some of th ODS that use this unique Info Object (we will call this A1) that creates unique entries will not activate with SID creation. It doesn't give much information apart from whatever process A1 is it is returned with errors.
    We get the following message
    Process 000034 returned with errors (process 34 is the one that tries to get a SID for A1)
    Message no. RSODSO_PROCESSING006
    Activation of M records from DataStore object CA_TS1 terminated
    We also geta  short dump every time too and that is copied below the line where it fails
    Does anyone know of how i can reset the SID gerenration or anythign that may help
    52           ID 'KEY'  FIELD 'BI0'                 
    53           ID 'DATA' FIELD l_field.              
    54                                                 
    55                                                 
    56   IF i_abend EQ rs_c_false.                     
    57 *... Nachricht an den Message-Handler schicken  
    58                                                 
    59     DATA: l_type  TYPE smesg-msgty.             
    60                                                 
    61 *... S-Meldung wenn kein Handler initialisiert  
    62     IF g_active IS INITIAL.                     
    63       l_type = 'S'.                             
    64     ELSE.                                       
    65       l_type = 'W'.                             
    66     ENDIF.                                      
    67                                                 
    68     CALL FUNCTION 'RRMS_MESSAGE_HANDLING'       
    69       EXPORTING                                 
    70         i_class  = 'BRAIN'                      
    71         i_type   = l_type                       
    72         i_number = '299'                        
    73         i_msgv1  = i_program                    
    74         i_msgv2  = i_text.                      
    75   ELSE.                                         
    76     DATA: l_text  TYPE string,                  
    77           l_repid TYPE syrepid.                 
    78                                                 
    79     l_repid = i_program.                        
    80     l_text  = i_text.                           
    81                                                 
    >>     RAISE EXCEPTION TYPE cx_rsr_x_message       
    83           EXPORTING text = l_text               
    84                  program = l_repid.             
    85   ENDIF.                                        
    86                                                 
    87 ENDFUNCTION.

    Yep right click and delete data then set up new initial etc with very small selection.
    Reloaded and exact same error message.
    when I check the /BI0/SBBP_OBGUID  table it only has one entry whilst the other infoobjects are getting filled in their SID tables so is there any way to sort of kick this table up the butt and reset it or something??
    Your right about the P table so we can cross that out of the picture )
    I do think it is somethign to do with the fact that we have used SE14 too many times and it hascaused in consistencies but if you have any ideas how to resync it or somethign it would be great
    thanks

  • ODS - Activation Problem

    Hi All,
    There are two ODS in our scenario. One Standard and One Custom ODS.
    For this standard ODS ( for Region - 1) we performed an Init long before for which the Deltas are running everyday smoothly.
    Now we have built a custom ODS for Region - 2 which is extracting from the same datasource.
    Before we could actually perform an Init to the custom ODS, the deltas of the Standard ODS have run and due to selection of “Update all data targets" in Infopackage, a delta request has come into our custom ODS also.
    Before performing an init we deleted all the delta request from the custom ODS…
    After performing init (Without data transfer) when we tried to activate our init request our custom ODS throws an error msg " ODS Object was built incorrectly." On further help window we found that it asks to upload the Init request of Standard ODS ( Region - 1 ).
    Also we tried to delete our init request and create a new init but we are unable to delete the init selection which we created for the custom ODS. When we tried to delete the init request it prompts us to delete all the init request for that datasource.
    Additional Information:
    Version: BW 3.1C
    Please help us out !!
    Regards,
    Buela.

    Hi,
      Yes, but some times when you delete a delta loads from the ODS and do some init or full loads it will show ODS was build incorrectly, you can try this option, there wont be any major problem by doing this.
    Regards
    Sankar

  • ODS/PSA Problems after System Copy

    Hello All....i am a basis admin and am having problems with PSA after performing system copy. I have copied R/3 (source system) ans SCM (source system) and BW (3.5)systems from production into test environment in parrallel. I have performed all required BDLS steps on R/3, SCM, and BW as well as maintenance of RSLOGSYSDEST table. All profiles and ports (we20/we21) have been maintained as well. I have modified and tested all RFC connections and have used RSA1 to restore the source system connections and to activate and replicate. When activating ODS objects, the following error is generated...
    There is no PSA for InfoSource 8ZFAP_O01 and souce system PB1CLNT510.
    PB1CLNT510 references former production BW logical sys and correct logical sys should be QB1CLNT510. Apparently BDLS has missed a table or I have skipped a step in my post-clone process of BDLS and WE20/21. I am wondering if there is a re-initialization or logical system conversion step i have missed or is anything else i can do to resolve this issue.
    Maximum points awarded for quick resolution.
    Thanks in Advance
    Chris
    Basis

    Hello Chris,
    This InfoSource is related to a DataSource in which the source system is BW system itself (in your case: QB1CLNT510).
    Try to first activate the DataSource 8ZFAP_O01 using the standard program (SE38): RS_TRANSTRU_ACTIVATE_ALL in which you should input the source system (QB1CLNT510) and the InfoSource 8ZFAP_O01. If you get a green light in the log that appears after the activation completes in which it says that all the structures have been activated, then all you need is to locate the DataSource in RSA15 and right click -> replicate.
    If the log showed you that this DataSource doesn't exist, then you'll need to Activate the source system QB1CLNT510 again.
    I hope this helps. Cheerz,
    Ali

  • Datamart Problems

    Hi All,
                I am new to BI . I have some doubts .
               1.  If I am loading 5 cubes from an ODS and in 4 cubes data loaded correctly and in one cube  the delta has failed.So what should i do to correct the delta and reload to that single cube . And does the successful requests in the other cube will have any impact because of this failed delta.
               2 . In the second one my ODS data is corrupted and my present delta is fine . But my past 2 deltas data was wrongly loaded and how can i repair and reload my past 2 deltas correctly  ?
               3 . In other scenario , in a ODS some of keyfigures were getting overwritten in update rules  and now they were asking the update type as addition . Now if i change my update rules will i face any consequences?? . And can we maintain both the update types for keyfigrues if necessary ??
    Regards,
    Aditya.

    Hi Aditya,
    answers for 1: we need to reset the deltamart status have reload it.
    answer for 2: Repair full is the best option as on when we come across this type of problems.
    Answer for 3:
    We can maintain the update mode for keyfigure as either over write or addition functionality,
    suppose if you are using only for staging purpose you can use overwrite functionality so that we can update the unique records to the above level target, or if you want to use it for your reporting requirements we can set update mode as additive.
    once the update mode is set and loaded the dso afterwards it is not advisable to change the update mode further we will get some reconcilation issues. it purely depends on your business requirements.
    Thanks,
    Sathish.

  • ODS Acitvation  Problem..

    Hi Experts:
    Following is the ABAP dump, while ODS data activation error in BI 7.0...Please help.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Except.                   CX_SY_OPEN_SQL_DB
    Date and Time          04.12.2006 22:02:29
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "ORA-12801: error signaled in parallel query
          server P007#ORA-00018: maximum number of sessions exceeded"
         Internal call code.........: "[RSQL/FTCH//BIC/AZFIGLO1040 ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
         "CL_RSODSO_ACTIVATE_REQUESTS===CP" or "CL_RSODSO_ACTIVATE_REQUESTS===CM00D"
         "ACTIVATE_DATA_FROM_QUEUE"
         If you cannot solve the problem yourself and want to send an error
         notification to SAP, include the following information:
         1. The description of the current problem (short dump)
            To save the description, choose "System->List->Save->Local File
         (Unconverted)".
         2. Corresponding system log
            Display the system log by calling transaction SM21.
            Restrict the time interval to 10 minutes before and five minutes
         after the short dump. Then choose "System->List->Save->Local File
         (Unconverted)".
         3. If the problem occurs in a problem of your own or a modified SAP
         program: The source code of the program
          In the editor, choose "Utilities->More
       Utilities->Upload/Download->Download".
       4. Details about the conditions under which the error occurred or which
       actions and input led to the error.
       The exception must either be prevented, caught within proedure
       "ACTIVATE_DATA_FROM_QUEUE" "(METHOD)", or its possible occurrence must be
        declared in the
       RAISING clause of the procedure.
       To prevent the exception, note the following:
    Thanks,
    RR

    Hi Ray,
    I think the system is trying to parllelly activate the Data , Check for the resources aswell as the requests, Try to do it manually request wise. also there is space problem for the PSA ..Check in DB02 for the Space Statistics. Delete some PSA and try activating.
    Thanks,
    Krish

  • DataMart problem

    Hi Gurus,
    I click  "generate export datasource" but I don't see it in the datamart.
    Please advice what could be the reason.
    Thanks
    Liza

    Under infosources refresh and look in Data marts application component for the export datasource (8*). Also check if 'Show generated ODS objects' is selected under settings --> display generated objects.

  • ODS Reconstruction Problem

    I have an ODS, that had 5 requests in the "Requests" tab on the Manage Data Target Screen.   There are also these 5 requests on the "Reconstruction" tab and these requests are also in the PSA.  (Data is in the PSA and it only goes to this ODS).
    Also, in between the last request and the next to the last request, the Datasource was changed.  A new field was added.  The last request successfully processed.
    I deleted these 5 requests in the ODS and now want to repopulate them from the PSA, i.e. the Reconstruction tab. 
    However when I select the one of the requests on the reconstruction tab and press the Reconstruct/Insert button, a BI_BOOK* job is submitted as expected but it cancels.  It cancels because this statement in program SAPLRSSM, screen 0450, failed to return any rows:
    select * from rsreqicods into table l_t_rsrequidods where
    tabnem = i_dta_and
    typ = 'I' and
    odssid = i_odssid.
    My next step was to look at the PSA.  I still see the 5 requests there.  However the icon on the left most of each request has a little red triangle with a white ! (I wish I had a clue as to what all these icons mean)
    My next action was that I right clicked on the oldest request in the PSA and select "Start the Update immediately".  This too submits a BI_BOOK* job which terminates, again for the same reason as from the reconstruct tab on the ODS.
    Additional information...  I looked at the PSA for this Infosource.  It has the new field that was added.
    If anyone can offer suggestions on how to repopulate this ODS, it would be most appreciated.

    Kishore,
    Thanks for the info.  I checked the data in the PSA table.  The 5 requests are in there and the table definition has the new field that was added.  As such I still dont understand why the reconstruct/insert fails.
    Can you or anyone else offer any advice?
    Special Note: I searched OSS on the subject.  Apparently in pre 3.5 versions there were problems in the reconstruction/insert if the ODS was a source for an Open Hub destination, which this is.  However this note does not apply to our version of BW.  Nonetheless I reset the deltas in the open hub.  However the problem still exists.

  • Hi ODS Activation problem

    Hi guys,
    I have one delta request in my ODS. That delta request contains 0 records. But this request is not getting activate and as well as not deleting from ODS.
    Please provide quick solutions.
    regards
    raja

    Job started                                                                 
    Step 001 started (program RSODSACT1, variant &0000000002248, user ID PADMAJA)
    The last step of the activation still contains errors.                      
    Activation of data records from ODS object CAMSTO02 terminated              
    The last step of the activation still contains errors.                      
    Activation of data records from ODS object CAMSTO02 terminated              
    The last step of the activation still contains errors.                      
    Activation of data records from ODS object CAMSTO02 terminated              
    The last step of the activation still contains errors.                      
    Activation of data records from ODS object CAMSTO02 terminated              
    Report RSODSACT1 ended with errors                                          
    Job cancelled after system exception ERROR_MESSAGE

Maybe you are looking for