ODS infoobject data not displaying exactly but zeroes

I have got one infoobject values displaying Zeroes in the ODS and its data is coming from the difference between the two dates using the update rule (ABAP Code) (i.e 19/09/06-09/09/06=9. 9 should be displayed in this object)but the data is displaying zeroes for some of the fields even if the dates are there in the production.
Trails I made: I loaded data again and I checked all the Update rules and transfer rules.All are perfect but no Solution.

Hi Suryam,
Just check in PSA whether the two date fields that are being used for your routine are being populated.Then try to debug once..its simple,give your user name as BREAK KRISH, if its my user name..and simulate from the Monitor, then you can find where it is really missing.
Thanks,
Krish

Similar Messages

Acrobat 9.5 - use Touchup text Tool to edit PDF. Updates do not display. But, if I "save as" Word doc, the edits appear in Word. This feature worked in earlier versions of 9.x patches.

Acrobat 9.5 - use Touchup text Tool to edit PDF. Updates do not display. But, if I "save as" Word doc, the edits appear in Word. This feature worked in earlier versions of 9.x patches.

I have a suspicion you're working with a scanned document that has had OCR run to recognize the text. The recognized text may be stored on an invisible layer above the image of the text, and that is what you're toucing up. It's invisible, so you don't see it, but retains the changes, so exporting produces the new edits.
When you run OCR to recognize scanned text,, try using the ClearScan option, instead of Searchable Text. See this help page on Acrobat (this is for version X, but still applies):
Adobe Acrobat X Pro * Recognize Text - General Settings dialog box
mh++

Data not displaying the report (Help me out Urgent)

Hi Folks,
When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
But i can see the data in the ODS for those dates.
Report is working fine till 26/11/2007.
But when the user is trying to check the reports for the above mentioned dates its not displaying.
Even in checked it the RSRT as well but the same case over there the data is not displaying.
Its bit urgent as its month end user wants to see the reports.
Any help or any clue will be great helpfull and appreciated.
Urs,
RK
*****Points Committed

HI Suchitra,
<i>First check out how many records are there in the ODS as on 27th and 28th</i>
There are totally 750 & 427 records on 27th and 28th.
<i>At the time of executing the query,are using giving any variable entries?</i>
Yes we are using variables entires like PO Date & PO number we usually check the reports giving the date in PO Date variable,
Any other clue please?
Urs,
RK.

How to add new field to table control data not displayed

hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishant

First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen.

Text File Data not Displaying completely

Hi All,
Have one issue. The program correctly extracts the data & export to Excel. All column /field data's are dispalying.However while saving this data in a text file in Aplications server file path, though all column/ field data are extracting bit it is not displaying complete column/field data's i.e last 3 or 4 column data's are not displaying after 257 character space (but actually it extracts data.It is just not dispalying while i am checking text file via AL11).
What could be the reason of not dipslaying the all column/filed values in text file wherea as while exporting to excel it is displaying? is there any character length constraint for text file?
Thanks

>
Debabrata wrote:
> What could be the reason of not dipslaying the all column/filed values in text file wherea as while exporting to excel it is displaying? is there any character length constraint for text file?
There is no restriction on the file size which you can upload on the app server. AL11 is nothing but a report program & there is a limitation on the max number of characters displayed on the page.
BR,
Suhas

Data not display in background layout

Hi Expert,
This is regarding screen layout.
FBL3N report.... I have create new layout for report FBL3N. when i run the report in foeground all data display in proper layout.
But when i run this report in Background two fields are not display in layout.
Please suggest me whern i do the changes....
Regards
PK.

I think you should change the forum if you are asking Finance module related qwuestions.

Data not displayed for Key Figure of MultiProvider

Hi Folks,
I have created a Query on MultiProvider which is actually copied from another Query(based on InfoCube) using RSZC. Now I have the problem with display of data for a KeyFigure in report. No data is displayed for the KeyFigure. The MultiProvider has Two InfoCubes where the KeyFigure is related to one of the two Cubes. The data is shown at the MultiProvider level. I have also checked for a new query on the same MultiProvider. Here too the data is shown in the report for the KeyFigure. But it's not showing in the Query which is copied from another.
Any assistance on the same is really appreciated.
Thanks,
Raju. Dupadally

Hi Diaz,
Thanks for your answer. Could you make it understandable. I haven't understood fully.
Thanks,
Raju. D

Data not display in BAM Dataobject through sensor in Bpel process.

Hi,
I am trying to integrate BAM with BPEL process in oracle 11g. I have created BAM Activity and variable sensor
in BPEL process but when i run my BPEL process then no data is display in BAM corrsponding to it. Error is coming at backend "not able to invoke writeToBAM operation in BAM Adapter".
Also this error is coming at SOA server console:
Exception: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'writetoBAM' failed due to: javax.security.auth.login.LoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution
Thanks in Advance

Hi,
I am trying to integrate BAM with BPEL process in oracle 11g. I have created BAM Activity and variable sensor
in BPEL process but when i run my BPEL process then no data is display in BAM corrsponding to it. Error is coming at backend "not able to invoke writeToBAM operation in BAM Adapter".
Also this error is coming at SOA server console:
Exception: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'writetoBAM' failed due to: javax.security.auth.login.LoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution
Thanks in Advance

Newly Created Infoobjects are not displaying in the RSA1

Dear Experts,
When ever i am trying to create a new Info Object Characterstic/Keyfigure, i am able to create and activate it sucess fully, but when i am trying to see the same in corresponding infoobjects catelog in RSA1 that object is not displaying there.
When i am trying to find the same using "FIND' Option it is returing 'No Entries' as result even though i am sure that obj is created.
Please help me in this context.
Regards,
Rajkandula

Have you created that Infoobjects under a specific Catalog.If it is true try to find that catalog and you can find the Infoobjects there. If it is not true they will be under Unassigned nodes. Otherwise refresh your transaction once and try to find the Infoobject with find option.
I hope it will help you.
JM Krishna

Date not displaying correctly

Hi,
we have an issue where date is not displaying correctly in report. it shows 1/1/1990. even in universe it shows the same value 1/1/1990. but if i run query at DB level it shows the correct date. Reporting Database is Sybase.
we are on Bi 4.0 SP 6.
Any Ideas.
Thanks,
Yogesh.

HI Farzana,
Finally,i have narrowed down the issue. So here it is,Initially we were seeing date as 1/1/1900 in webi rich, IDT and BI LaunchPad. so than we have made changes to sybase. prm file in following location
........\dataAccess\connectionServer\sybase\extensions\legacy
in prm file the input date parameter is as below
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:m:s am/pm'</Parameter>
we changed it to
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:mm:ss A'</Parameter>
and than we see correct date in IDT and Webi rich but not in BI LaunchPad. the connection we were using in universe is ODBC. so i have created a new connection using sybase CTL client and now i see correct dates in BI LaunchPad also. So i am not sure if i need to make changes to prm file in /dataAccess\connectionServer\odbc\extensions location for the report to show correct values using ODBC.
Any Idea.
Thanks,
Kumar.

Hierarchy node variable - successor node data not displayed

Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
Frank

Hi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank

Expiration date not displaying after upgrade from 2007 to 2013

I recently upgraded from MOSS 2007 to 2013. I have information management set up on a library of InfoPath forms. For the forms that were created prior to the upgrade, the expiration date is displaying and actually get updated if I modify them.
But none of my forms that have been created after the upgrade, are displaying when the expiration date is, which should be one year from modify date. If I modify the forms created prior to the upgrade, they reflect the new, update date.
Are these new forms not getting the policy applied to them, and why not? I am not sure why the older forms are getting updated, but not my new ones.
Denise E.

Hi Denise,
According to your description, my understanding is that the Expiration date column was not displaying values after upgrading from SharePoint 2007 to SharePoint 2013.
Per my knowledge, we can only use the date column which is added to the library or list or the Declared Recorded date to set the retention policy, so if the Expiration date is used in the retention policy then the Expiration date should be a column in the
library or list.
I recommend to check the retention policy in the library and see which column is used in the retention policy as the image below shows:
After that, go to the Library settings to find this column.
Could you please provide screenshots of the retention policy and the columns in the Library settings page?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Mod date not displaying in Files panel Dreamweaver CC

After upgrading to Dreamweaver CC, on OS X Mtn Lion, my Files pane will not display the Modification Date for both local and remote files. The column is there, but it's blank. I have tried hiding and showing that column in the Sites setup, but that did not work. Any ideas?

I can confirm that the solution posted by crockej does indeed work, I am not by any means saying that it is a perfect solution, and am sure that it is not the actual fix, but it does work, I landed up having to add JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI all to fy file list and although this was 90% of the missing icons fixed, it still requires more like m4v etc.
Think of this as more of a temporary solution to the problem, but it does work.
This is what my /Users/XXXXX/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt file looks like now.
HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEM E,CONFIG,MODULE,PROFILE,ENGINE,SVG,JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI:Al l Documents
HTM,HTML,HTA,HTC,XHTML:HTML Documents
SHTM,SHTML,STM,SSI,INC:Server-Side Includes
JS,JSON:JavaScript Documents
XML,DTD,XSD,XSL,XSLT,RSS,RDF:XML Files
LBI:Library Files
DWT:Template Files
CSS:Style Sheets
ASP,ASA:Active Server Pages
ASPX,ASCX,ASMX,CS,VB,CONFIG,MASTER:Active Server Plus Pages
CFM,CFML,CFC:ColdFusion Templates
AS:ActionScript Files
ASC:ActionScript Communication Files
ASR:ActionScript Remote Files
TXT:Text Files
PHP,PHP3,PHP4,PHP5,TPL,PHP-DIST,PHTML:PHP Files
LASSO:Lasso Files
JSP,JST:Java Server Pages
JSF:Fireworks Script
TLD:Tag Library Descriptor Files
JAVA:Java Files
SQL:SQL Files
ASX:Windows Media Advanced Stream Redirector
WML:WML Files
EDML:EDML Files
VBS:VBScript Files
VTM,VTML:VTML Files
SVG:Scalable Vector Graphics Files
Thanks to crockej for finding this semi solution for now.
Looking for Knysna Accommodation?

Notes displays title but not the content

Was a Yosemite beta user. Since updating to the shipping version of Yosemite, Apple's Notes app will display the title/date of each note, but when I select a title, the content of the note does not display. These notes, synced through iCloud, display as usual on my iOS devices. Ideas?

How many Notes are affected?
If you do not have a great many of them, use this workaround:
Quit Notes on your MacBook Pro.
De-select Notes in iCloud.
On your iOS device, edit one of the missing Notes. Make any arbitrary change; it does not matter.
Repeat for each of the missing Notes.
On your Mac, select Notes in iCloud again, then launch the Notes app. The missing Notes will reappear as they are downloaded from iCloud.
If you have a great many Notes: do you have a Time Machine backup?

Data not displaying on MI client

hii all,
i have created a mi application in which i m fetching data from oracle database, first i have written a code in function module to fetch the data from oracle database in to an internal table and also i checked in ABAP debugging mode.Data is coming in internal table but i have to keep on pressing f6 untill whole data comes.Is there is any problem in using internal table since in other normal case(i.e fetching data from r/3 bcakend) in debugging mode all data is displayed by pressing f6 once only.MI application is running but only structure is coming ,data is not displaying.
Also how can i fetch the oracle table data in to to abap dictionary table(i have already establised the connection with oracle database ).
Can anyone can suggest what can be the problem.
Thanks in advance.
Devendra Phate

Hi geetha,
Declare one variable at top level and assign by ORG_ID.
Print this variable where you wanto show value of ORG ID.
Thanks
Ravi
[email protected]

ODS infoobject data not displaying exactly but zeroes

Similar Messages

Maybe you are looking for