ODS, Inventory cube, and WM- Trying to run a report but not working! Help

Hi Gurus,
Hope somebody can help me here....
I have an Inventory Cube and an ODS on Material Plant and another on Warehouse Management. For my reports I need fields from three of them so I created a Multi Provider by using these. But I have only Material and Plant as common in three of them, which is used in defining the Multi Provider. Along with these I have used some more characteristics which are not common. So now when I run a query on this MP, I am getting a display wherein the common characteristics get the values that are correct but for uncommon chars the values for the kfs from other data targets become blank and an additional row comes too.
For example, I have kfs like Blocked stock in the cube and in one of the ODS I have kfs like standard price. So, in the query for the char material group which comes from the ODS there are no values for Blocked stock, I mean I can see a row wherein there is a value for Blocked stock and a blank for Standard Price, in the additional row there is a blank for Blocked stock and a value for Standard price. This is the case with all the other kfs of different info providers.
Is it because they are not common in all the info providers? Is there anyway to solve this? RRI will not work as I need the KFs from both the info providers.
I am stuck now with this problem, so any guidence would be a BIG help.
Thanks

Is it because they are not common in all the info providers?
-->Yes
Is there anyway to solve this?
--> Yes and no. If there is a join condition between the ODSs that you can use to get the fields on the same row, you can do an infoset.
--> To achieve something like an outer join, you can create RKF for your base KFs, and restrict them on uncommon chars with 'constant selection'. This may not work in all cases. Search for a blog by Prakash Darzi on 'Constant selection' to understand this.
If logically there doesn't exist a relation (try to visualise how you will derive your output row if you were given these two in a file or spreadsheet - is there a logical link to connect the two sets of data?) you cannot expect the results that you look for.

Similar Messages

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not enough space?

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?

Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion.

HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!

I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!

The latest iWork '09.2 requires 10.7 Lion. You can go onto eBay and get the '09.0 or the '08 version which will work with 10.4. http://en.wikipedia.org/wiki/IWork
iWork '09 http://www.ebay.com/sch/i.html?_sop=12&_ssov=1&_fln=1&_sacat=0&_sc=1&_nkw=iwork+ 09&rt=nc
iWork '08 http://www.ebay.com/sch/i.html?_nkw=iwork+08&_sacat=0&_odkw=iwork+09&_sop=12&_ss ov=1&_osacat=0&_fln=1&_sc=1

HT4061 My phone can't turned on. I tried to press the home button and main button at the same time, but not working. what should I do?

Iphone 4s can't turned on, goes total black. Tried to press button and main button at the same time, but not working. what should I do?

recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

Im tryting to install new itunes but says windows installer, you are tring to use is a network resource that is unavailable. find folder itunes.msi i dont have a folder like that and anything i use that is related does not work. help me?

"you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Iphone 4 shutdown and came up with connect to itunes, but wont work, help!

my iphone 4 shutdown on me, when it finally decided to turn back on it came up with "connect to itunes" when i did it woudlnt connect, ive had this come up before and i got of the "connect to itunes" but i forget how,im unable to use my phone and i need to im dieing without it, please help!

I have exactly the same with my iPad. All i have now is the connect to iTunes picture. I have run the diagnostics in itunes (under help menu) and it says that neither my phone or iPad are connectted yet they physically are. I have gone into device manager and it says there is a software connection problem. I am trying another pc to connect my pad. Update - connected ipad to my netbook with latest itunes version and it is carrying out the update. that means this laptop has a software comms problem with USB.

Help -- Trying to create JAR file but not working

Hi everyone
I have created a rather noddy Java program that consists of 4 JComboBox's and 1 JButton on a JFrame.
When the button is clicked a text file is generate with the options that have been selected.
There are severial files that the program uses for this:
gcc.java
OutToFile.java
gccConfirm.java
MyNewWindow.java
main.java
I am using Jcreator and so must use the command line to create the Jar file.
I have never done a jar file before so I did an example with a hello world program and got it working now problem. I did the same for this program and the JAR file is generated without error. I double click on the JAR file to run the application, but nothing happens. I can see the application running in memory but nothing loads on the screen. However if I run it from the command line using Java -jar gcc.jar then everything is ok.
can anyone help me here?
thanks in advance

If you run you .jar from the command line (a shell in unix speak) there
already is a console where your java program can send it's System.out
stuff. Right click on your .jar and select 'properties' (or similar). Note
that your .jar is run by 'javaw'. This executable is similar to the 'java'
executable except that it doesn't open a console for you. Change the
'javaw' command to 'java' and voila, there's your console again.
kind regards,
Jos

I am getting total lockups and i am unable to use the app, tried all the usual options but not working still.

All my attempts at getting FCPX 10.1.1 working are failing. I was in mid-edit on a relatively simple job. I am completely locked up with the waiting rotator on continuously. Has anyone had this problem or can offer any advice. I am on a fully spec'd iMac and use a Thunderbolt 8TB drive. My iMac is working correctly with every other app.

There are almost infinite permutations to the type of media and your use of the Mac and FCP X that it is impossible for anyone to guess what you are doing wrong.
Please give detailed info of the media, the project specs and your workflow.

My name is demah and i forgot my password and i tried to connect to itunes but it doesnt help ?

hey,
i'm 12 yrs old and i forgot my password and i connected to the itunes and didnt help.i went to youtube for tricks didnt work,
can u please reply i am really scared
have a good day...
demah fathi

Hi anudeep reddy,
Welcome to the Apple Support Communities!
I understand that your iPad is disabled due to the passcode. You can restore the iPad back to its original settings by placing it in recovery mode. Please use the following article as a reference and follow the steps within it to restore using recovery mode.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
5. Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
Have a great day,
-Joe

Display Driver for TPC-2006 trying as per web soultion but not working

Hi friendz
Hope u all doing great. Actually we working on project for waste water treatment plant. Here its supplied with NI PAC and Touch panel 2006. Now the issue is in touch panel 2006 the displays are not clear and my client not happy with it.When i try yur web solution for Display Driver for TPC-2006 downloaded files are not running in touch panel, but for your information since i dont have card reader in my work bench computer i copied the file in different way dont know whether its correct r wrong. Steps i did was
- Downloaded files into my desktop computer first
- Then Inserted blank Compact Flash (CF) into touch panel.
- Through activesync synchronized flies between desktop and touch panel.
- Copied downloaded files into compact flash.
- Power off touch panel and power on no change.
If the steps gone through correct means why files not running any other solution. If wrong is there any other way coz i dont hv card reader rite now.
Pravin Jayapaul
Application Engineer

Pravin,
Did you get the following warning when you tried to activesync the files to your touchpanel?
That's the reason why you should transfer the files over with a card reader. Also, make sure your CF card is at least 256MB in size.
Message Edited by mishkin on 03-28-2009 01:55 PM
Misha
Attachments:
warning.png ‏4 KB

Made new Apple ID and is still asking for old that is not working, help

Please help me with my Apple ID. We have made a new one because we could not think of our old one and nothing was matching when we tried to regain it. So I cannot update or download anything as it still asks me for the old ID password, I don't know!!! Please help

IIf you are trying to activate a phone and it is asking for a previous users Apple ID and password you have encountered the Activation Lock. This is a security feature to prevent lost or stolen iPhones from being activated By an unauthorized individual. You must contact the previous owner to either get the Apple ID and password or have them remove the phone from Find My iPhone. If you cannot contact the previous owner you will not be able to activate the phone.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account

HT1338 MacBook Pro went down - tried reinstalling with back up disk - not work - help!!!!

As above???????????????????

That error occurs when the Windows Scheduler fails.
Try to use System Restore first.
If that doesn't fix the problem,
Run the Vista System File Checker Tool:
1. Open a Command Window in Administrator mode:
* click Start
* click All Programs, then Accessories
* right click on the Command Prompt option,
* on the drop down menu which appears, click on the Run as Administrator option.
* If you haven’t disabled User Account Control (and you shouldn’t!) you will be asked for authorisation. Click the Continue button if you are the administrator or insert the administrator password.
2. Start the System File Checker
* In the Command Prompt window, type: sfc /scannow,
* press Enter.
* You’ll see “the system scan will begin”.
The scan may take some time and windows will repair/replace any corrupt or missing files. You will be asked to insert your Vista DVD if it’s needed.

CS6 design and web premium, looking to download it but not working?? can anyone help?

I have purchased the CS6 design and web premium at amazon and have had trouble downloading it. First i needed the correct processor, such as a minimum of Snow leopard or 10.6.8. I need help getting started because nothing is working for me? If anyone has any input please let me know. Thanks!

Hi
Please find the download links below
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Please read the download instructions carefully befoe downloading.
Hope It helps
Thanks

Trying to use string tokenizer but not working as expected

Hello friends,
In the following code, I am trying to acheive an output like this:
Manju Nambiar
Mini Nambiar
-variable mc stands for the maximum number characters allowed in a line.
-variable wb stands for wordbreak allowed i.e if set to false, a word should be printed as it is without splitting even if the maxchar limit is crossed, but then the next word should come on the next line.
String input = "Manju Nambiar Mini Nambiar";
String token;
String wb = "f";
String newlineop = System.getProperty("line.separator");
int mc = 10;
if(wb.equalsIgnoreCase("f"))
StringTokenizer splitip = new StringTokenizer(input," ");
while(splitip.hasMoreTokens())
token = splitip.nextToken();
System.out.println("length is:"+newlineop.length());
if((newlineop.length())<mc)
newlineop = newlineop.concat(token+" ");
else
newlineop = newlineop.concat(newline+token);
System.out.println(newlineop);
The output I am getting is:
Manju Nambiar
Mini
Nambiar
I know it is because of the length of the newlineop variable that I am checking in the loop - but I am not able to see how to circumvent this??? :-(
Please Help,
Thanks,
Manju

        String input = "Manju Nambiar Mini Nambiar";
        String token;
        boolean wb = false; // as Nasch pointed out, use boolean here
        String newlineop = System.getProperty("line.separator");
        int tokenLength = 0; // variable to check length of line
        int mc = 10;
        if (!wb)
            StringTokenizer splitip = new StringTokenizer(input, " ");
            while (splitip.hasMoreTokens())
                token = splitip.nextToken();
                if (tokenLength < mc)
                    tokenLength += token.length();
                    newlineop = newlineop.concat(token + " ");
                else
                    tokenLength = token.length(); //new line, reset length
                    newlineop = newlineop.concat("\n" + token + " ");
        System.out.println(newlineop);
    ram.

ODS, Inventory cube, and WM- Trying to run a report but not working! Help

Similar Messages

Maybe you are looking for