ODS NOT ACTIVATED ERROR MESG
The creation of the export DataSource failed
Message no. RSBM035
HI,
PL HELP,
Diagnosis
The creation of the OLTP source &v1& was unsuccessful.
System response
Whilst generating the Export InfoSource, the Metadata for an R/3 OLTP source must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
@5C@ RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
@5C@ Error when creating the export DataSource and dependent Objects
Hi!
At least we have now the source of your problem. If you have a basis guy (or team), ask him to look after this.
There can be a lot of simple reasons for this problem: system is done (e.g. for offline back-up), system is overloaded (e.g. because of performance test), router dumped...
If you know this system and can logon yourself, you could check for some problems - but best would be to ask your local system administration.
Regards,
Christian
Similar Messages
-
I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!
See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages -
Activation error: Printer not activated, error code 20
I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
ReyWhat operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Material is not activated error in MM
Hi,
We'vs installed SAP IDES in our Landscape recently. Whenever I tried to create a new material using MM01 transaction code, it creates. But then when I tried to view the same in MM03 or MM02 it throws an error of the following,
The material XXXXX does not exist or is not activated
Message no. M3305
I'm unable to diagonis the problem properly. Will appreciate your help.
Thanks,
Rajesh Manoharan>
Kishore Kumar Chiluka wrote:
> Hi
>
> Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
>
> Thanks & Regards
>
> Kishore
Thanks a lot Kishore.
But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
Can you help me in identifying a solution to this problem?
Thanks,
Rajesh Manoharan -
XI 3.0 : java is not active error and dispacter is not working
Dear Experts..............
Pls help me in solving this...
the ..log file says..
XI01\saploc\XI1\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Apr 18 19:39:04 2006
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 2448
Tue Apr 18 19:39:05 2006
***LOG Q00=> DpSapEnvInit, DPStart (00 2448) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Apr 18 19:39:17 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0151.qqq.nxst) took 12 seconds
Tue Apr 18 19:39:22 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 039D0040, size: 2505416)
DpShMCreate: allocated sys_adm at 039D0040
DpShMCreate: allocated wp_adm at 039D17A8
DpShMCreate: allocated tm_adm_list at 039D3188
DpShMCreate: allocated tm_adm at 039D31B0
DpShMCreate: allocated wp_ca_adm at 03BF10F8
DpShMCreate: allocated appc_ca_adm at 03BF5748
DpShMCreate: allocated comm_adm_list at 03BF6EB8
DpShMCreate: allocated comm_adm at 03BF6ED0
DpShMCreate: allocated vmc_adm_list at 03C25CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 03C25CF8
DpShMCreate: allocated wall_adm at 03C25D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 594 blocks reserved for free list.
ES initialized.
Tue Apr 18 19:39:23 2006
J2EE server info
start = TRUE
state = STARTED
pid = 2736
argv[0] = C:\usr\sap\XI1\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\XI1\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\XI1\SYS\profile\XI1_DVEBMGS00_XI01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1062
argv[5] = -DLISTEN_PORT=1063
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=XI1
argv[8] = -DSAPMYNAME=XI01_XI1_00
argv[9] = -DSAPPROFILE=C:\usr\sap\XI1\SYS\profile\XI1_DVEBMGS00_XI01
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( XI01) [dpxxdisp.c 9736]
Tue Apr 18 19:39:25 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
DpJ2eeLogin: j2ee state = CONNECTED
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Apr 18 19:39:33 2006
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2736)
ERROR => DpProcKill: kill failed [dpntdisp.c 433]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Apr 18 19:40:04 2006
ERROR => W0 (pid 2744) died [dpxxdisp.c 12187]
ERROR => W1 (pid 2752) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2760) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2768) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 2776) died [dpxxdisp.c 12187]
ERROR => W5 (pid 2784) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 2800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2744 (SIGUSR2)
ERROR => DpWpKill(2744, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2752 (SIGUSR2)
ERROR => DpWpKill(2752, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2760 (SIGUSR2)
ERROR => DpWpKill(2760, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2768 (SIGUSR2)
ERROR => DpWpKill(2768, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-2776 (SIGUSR2)
ERROR => DpWpKill(2776, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2784 (SIGUSR2)
ERROR => DpWpKill(2784, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2792 (SIGUSR2)
ERROR => DpWpKill(2792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2800 (SIGUSR2)
ERROR => DpWpKill(2800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 18 19:40:14 2006
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Wed Apr 19 02:40:14 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2744 Ended no 1 0 0
1 DIA 2752 Ended no 1 0 0
2 UPD 2760 Ended no 1 0 0
3 ENQ 2768 Ended no 1 0 0
4 BTC 2776 Ended no 1 0 0
5 BTC 2784 Ended no 1 0 0
6 SPO 2792 Ended no 1 0 0
7 UP2 2800 Ended no 1 0 0
Dispatcher Queue Statistics Wed Apr 19 02:40:14 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake event
tried swaping memory as metioned in sdn but seems doesnt work...
waiting for replies..
simraan.Hi,
refer this threads...
Web Dispatcher is not started
Can't start Web Dispatcher
http://help.sap.com/saphelp_nw04s/helpdata/en/f5/51c7d170bc4a98b1b5a0339213af57/frameset.htm
Hope it helps..
Thanks,
vasanth. -
ORA-21779: duration not active error line 25 of MDSYS.AGGRUNION
I execute the following pl/sql (line 56/57 in
a procedure called RebuildSMZLabels)....
v_query := 'SELECT /*+ INDEX ( A BASE_SMZ_A_SHAPE ) NO_INDEX ( A BASE_SMZ_A_RETIREDATE ) */ MDSYS.SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(a.s
hape,:1)) FROM &owner.base_smz_a A WHERE MDSYS.SDO_RELATE(a.shape,:2,''mask=ANYINTERACT querytype=window'') = ''TRUE'' and retiredate is
null';
EXECUTE IMMEDIATE v_query INTO v_union_shape USING v_diminfo(1).sdo_tolerance, v_trans_shape ;
And I get...
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
DECLARE
ERROR at line 1:
ORA-21779: duration not active
ORA-06512: at "MDSYS.AGGRUNION", line 25
ORA-06512: at "MDSYS.AGGRUNION", line 25
ORA-06512: at line 1
ORA-06512: at "MDCADM.REBUILDSMZLABELS", line 57
ORA-06512: at line 5
Got me beat... anyone got any ideas?
Simon Greener
GIS Manager
Forestry TasmaniaDan
I reverted to the old 8i code (with individual
UNIONS) and it still fails:
DECLARE
ERROR at line 1:
ORA-21779: duration not active
ORA-06512: at "MDSYS.SDO_3GL", line 439
ORA-06512: at "MDSYS.SDO_GEOM", line 3096
ORA-06512: at "MDCADM.REBUILDSMZLABELS", line 74
ORA-06512: at line 5
Line 74 is:
v_union_shape := MDSYS.SDO_GEOM.SDO_UNION(v_union_shape,v_diminfo,v_shape,v_diminfo);
Any ideas as I need this to work in 9i ASAP (as it
doesn't work in 8i)?
PS Dan, it is the same database/code problem I sent
to you earlier this year. It is getting to the point
that I am going to have to rebuild all this database
centric code (which is where it needs to be in the
business process) within our GIS (ArcInfo) which is going
to be far more complex and not sustainable in the medium
term.
regards
Simon -
Source system not Active error while installing BI content cube
Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams -
ICMAN not Active error in SICF
Hi All,
I am working with Consuming Webservices. I am working on ECC 5.0 system.
In SICF when I have activated following services :
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
But when I am testing any of the services I am getting an Error message "ICMAN not ACTIVE" in SICF.
This happens even after /default_host/sap/public/icman is activated using context menu 'Activate service'.
Please guide me in this.
Thanks & Regards,
Ankurcheck this link.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm
if problem still persist, do get back.
Regards
Raja -
ODS data activation error system SAP BI 7.0
Hi Gurus,
I am carrying out full load in a standard ODS.
When I try activating the request,system is giving me the error message as given below.
No SID found for value '%' of characteristic 0COND_CURR.
I have also tried the option of transfer global settings in RSA1->source systems.
Please help in this regard.Hello Gurus,
Issue resolved
For my requirement i changed info object 0currency -> General Tab page -> Transfer routine -> Created and written a code as follows
If result = '%' .
result = 'USD'.
endif.
This resolved my ODS data activation issue.
Thanks a lot for all your help. -
HI ,
can somebody help with the following error msg
Profit Center Acctg locked for posting in fiscal year 2007, company code 1801Hi,
See whether you have activated PCA in OKKP T.code.Also,
Check in T.code OKE5,whether PCA for the corresponding year is active or not.
If not, select the check box in section control indicators.
Regards
A
Assign points if useful
Message was edited by:
Aravind -
MRRL GR-based invoice verification not active error
Hi,
I have a vendor that has ERS active.
Before it was activated four POs were raised, goods receipted and invoiced. All 4 POs have freight charges (for the same vendor)
When I run MRRL with "Settle goods items and planned delivery costs", which I have to do, these four POs are coming in even through they are fully invoiced already. This is frustrating the clients who can't understand why old purchase orders are coming in at all.
any explanations or (even better) corrections?Hi!
As have already mentioned for every purchase order with flag 'ERS' a table entry is generated.
If a goods receipt is posted, this goods receipt should be invoiced via ERS (transaction MRRL). Manually posted invoices should be avoided, because the record in table EKRS will not be deleted. Material documents will be written to table EKRS and if you invoice manually (for example, via MIRO) this entry will still be there. Then, correctly, the system
will read this table and take these items as not invoiced. This is correct and according to the standard system design.
In general, if you processed an invoice manually for a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run. To do so, you run ERS online in test mode, select the item and Exclude from ERS for the item. You can do this by Highlight the relevant lines and then click on the "Save" icon
('Exclude from ERS' - Ctrl+S ).
Best regards
Erika -
Please help
Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with Milos. Please provide more information for further troubleshooting.
From your initial subject it seems you are facing issue with printer activation on your server. The error may be caused if the wrong printer is set as the default printer, the printer driver is missing, or if there are conflicts in the device manager. Please
make sure below 3 steps whether it’s get some workaround.
Step one: Make sure the desired printer is set as the default printer
Step two: Re-install the USB Composite Device from Device Manager
Step three: Reinstall the Software for that particular printer
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Error in IS-AFS "Class Type not Active"
Hiii,
I am getting an Error while doing GR for batch (023) managed material "Class Type not active: Error ID: VK 663.
Please throw some light.
Regards,
KumarHi Kumar,
We are also facing the same problem.
Have you fixed it? if so could you please pass-on the solution/useful informtion..
Thanks in advance..
Regards,
Siva -
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Hi
ABAP instant of ECC6 System is started but Java instant isnt started please find below of dev_w0
And i found error in dev_w0 is DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active and in dev_disp is DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Error ==> ThPlgSend00B: MpiwriteOutOfBand <d> failed (14)
Error ==> DLoadLib: Loadlibrary (D:\usr\sap\xxx\DVEBMGS00\exe\dbsdbslib.dll)
Error 126 = "the specified module could not be found"
Error => Couldn't load library 'D:\usr\sap\XXX\DVEBMGS00\exe\dbsdbslib.dll'
Please find below dev_w0 and dev_disp
A Fri Apr 25 16:56:30 2008
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 10332kb, dir_size: 10260kb.
A Attached to PXA (address 5F620040, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Fri Apr 25 16:56:31 2008
A ABAP ShmAdm attached (addr=43A0C000 leng=20955136 end=44E08000)
A >> Shm MMADM area (addr=43E81EF8 leng=126176 end=43EA0BD8)
A >> Shm MMDAT area (addr=43EA1000 leng=16150528 end=44E08000)
A RFC Destination> destination ordvmsapecc_V37_00 host ordvmsapecc system V37 systnr 0 (ordvmsapecc_V37_00)
A RFC Options> H=ordvmsapecc,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 19000 bytes at 0A410040
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\V37\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\V37\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N
N Fri Apr 25 16:56:32 2008
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.95.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [12]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ordvmsapecc_V37_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Fri Apr 25 16:56:33 2008
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >ordvmsapecc_V37_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 25.04.2008 16:56:32 1209135392 / 3024
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 25.04.2008 16:56:33 1209135393 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 25.04.2008 16:56:33 1209135393 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <ordvmsapecc_V37_00 >
L BtcSysStartRaise: End
S
S Fri Apr 25 16:56:34 2008
S server @>SSRV:ordvmsapecc_V37_00@< appears or changes (state 1)
S server @>SSRV:ordvmsapecc_V37_00@< appears or changes (state 1)
C
C Fri Apr 25 17:02:53 2008
C The IRow interface is supported by this OLEDB provider
B table logging switched off for all clients
S
S Fri Apr 25 17:03:56 2008
S found spool memory service RSPO-ACTIONS at 27719C38
Please find the dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid V37
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, Unicode, optimized
pid 4832
Fri Apr 25 16:55:20 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
Fri Apr 25 16:55:21 2008
***LOG Q00=> DpSapEnvInit, DPStart (00 4832) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 25 16:55:25 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ordvmsapecc_V37_00 <
DpShMCreate: sizeof(wp_adm) 25776 (1432)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1520)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 071C0040, size: 4898888)
DpShMCreate: allocated sys_adm at 071C0040
DpShMCreate: allocated wp_adm at 071C1E80
DpShMCreate: allocated tm_adm_list at 071C8330
DpShMCreate: allocated tm_adm at 071C8360
DpShMCreate: allocated wp_ca_adm at 075D17A0
DpShMCreate: allocated appc_ca_adm at 075D7560
DpShMCreate: allocated comm_adm at 075D94A0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0765A360
DpShMCreate: allocated gw_adm at 0765A3A0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0765A3D0
DpShMCreate: allocated wall_adm at 0765A3D8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 25 16:55:28 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 1999 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5168
argv[0] = D:\usr\sap\V37\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\V37\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\V37\SYS\profile\V37_DVEBMGS00_ordvmsapecc
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1789
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=V37
argv[7] = -DSAPMYNAME=ordvmsapecc_V37_00
argv[8] = -DSAPPROFILE=D:\usr\sap\V37\SYS\profile\V37_DVEBMGS00_ordvmsapecc
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Please guide me to solve the issue..
Thanks
Jayson.
Edited by: Peter jayson on Apr 28, 2008 9:52 AM
Edited by: Peter jayson on Apr 28, 2008 9:55 AM
Edited by: Peter jayson on Apr 28, 2008 10:02 AMHi Juan,
i checked in SM52 But in VMC is not loaded
Shared GC is inactive
Global Classes is 0 bytes
Global programs is 0 Bytes
Global Data is 0 Bytes
Other Global Data is 0 Bytes
Error Occured 0
Please guid me how to load the VMC and make the active the Shared GC
Thanks
Jayson
Maybe you are looking for
-
Connect to server using IPv6 address in afp URL
I'm not sure whether this is the correct forum for this question, but does anyone know whether I can specify an IPv6 address in the "Connect to Server" dialog? I've setup IPv6 over direct-wired ethernet between my MBP and Mini. Using ping6, I can pin
-
EJB Diagram doesn't prompt to Associate with Persistence Unit
I'm new to EJB/Faces world. I did the tutorial Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces. But when I add the EJB Diagram, am not prompted to pick a persistence unit and hence am not able to drop my JPA's. Any id
-
Itunes not giving "manually manage songs" option despite following instruct
I have an ipod shuffle. I am trying to place songs on my ipod from a computer at work (Mac G5) instead of my home computer (Windows XP). Despite following the instructions to set itunes to manually manage my songs, it never lets me get far enough to
-
How I can change timescale to show financial year
Hi I am currently facing a problem for timescale. Actually my projects working according to financial years and PM's want to see the bar chart accordingly.Even they want to see the FY / quater view in time scale. Is there any way to get that view in
-
Anyone want a real cool Linux Live CD?
Hi, Just thought I would tell everyone that if they want a cool Arch based live CD, then why not try Archie. Wiki page for Archie More info & help here