ODS - Number of Active Data Records count?

Hi,
I am having a ODS. In manage screen of ODS, i can able to see the records as shown bellow:
Transferred records: 352053
Added Records: 1836
But the number of entries in Active Data of ODS is only 471 records.
My question here is that why Added records (1836) are not equal to number of Active data records (471)? Where i am missing or is it correct?
Best Regards,
Venkata.

Hi,
Have you completed the Activation of ODS data after uploading? If no see the entries in NEW records' table of ODS.
If you have activated already,still there is a chance to have different count, because of no of records with same value of KEY fields but exist in different packets.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar

Similar Messages

Advise on maximum number of Active data ADF faces components on one page

How many active data ADF faces components (ADS configured in long polling transport mode) can we have on a page? Is there any restriction (eg: one factor could be max number of concurrent HTTP connections) ?

Can you please tell us which JDev version you are using? A use case would be appreciated too.
There has been a discussion on ADS here the last couple of days. Search the forum and you may find some useful info.
Timo

Need to find out the number of Master data records transfered to the BW

Hi,
We need to find out the number of Master data (example -0MAT_PLANT_ATTR) records to be transfered to BW side. This is a delta extract. We are preparing test scripts to check the master data extract ( full & delta) from ECC6 TO BI 7.0..
Advance Thanks.

Hi,
Goto RSA3 and run that master data extractor in D mode if you want to know the number of records in delta and in F mode if you want to know the Full volume. But make sure that you set data records/calls and the display extr calls numbers so that you get the total number of records.
The other option is goto the master data source table and look at the number of records in that table. That'll give you an idea of the total number of records in the table.
One other option is to goto RSA7 , select the delta datasource and hit the display button. You'll get to know the number of entries in the delta queue that way as well.
Cheers,
Kedar

Loading ODS - Data record exists in duplicate within loaded data

BI Experts,
I am attemping to load an ODS with the Unique Data Records flag turned ON. The flat file I am loading is a crosswalk with four fields, the first 3 fields are being used as Key Fields in order to make the records unique. I have had this issue before, but gave up in frustration and added an ascending number count field so simply create a unique key. This time I would like to solve the problem if possible.
The errors come back referring to two data rows that are duplicate:
Data record 1 - Request / Data package / Data record: REQU_4CNUD93Q3RCC80XFBG2CZXJ0T/000003/ 339
Data record 2 - Request / data package / data record: REQU_4CNUD93Q3RCC80XFBG2CZXJ0T/000003/ 338
And below here are the two records that the error message refers to:
3     338     3902301480     19C*     *     J1JD
3     339     3902301510     19C*     *     J1Q5
As you can see, the combination of my three Key Fields should not be creating a duplicate. (3902301480, 19C(asterisk) , (asterisk))   and (3902301510, 19C(asterisk) , (asterisk)) I replaced the *'s because they turn bold!
Is there something off with the numbering of the data records? Am I looking in the wrong place? I have examined my flat file and can not find duplicates and the records that BW say are duplicates are not, I am really having a hard time with this - any and all help greatly appreciated!!!

Thank you for the response Sabuj....
I was about to answer your questions but I wanted to try one more thing, and it actually worked. I simply moved the MOST unique Key Field to the TOP of my Key Field list. It was at the bottom before.
FYI for other people with this issue -
Apparantly the ORDER of your Key Fields is important when trying to avoid creating duplicate records.
I am using four data fields, and was using three data fields as the Key Fields. Any combination of all three would NOT have a duplicate, however when BW finds that the first two key fields match, sometimes it apparantly doesn't care about the third one which would make the row unique. By simply changing the order of my Key Fields I was able to stop getting the duplicate row errors...
Lesson - If you KNOW that your records are unique, and you are STILL getting errors for duplicates, try changing the ORDER of your key fields.

Number of new delta records into cube

Hi,
The deltas are running for the cube. Client wants to know how many number of records are loaded in the cube for each load.
I mean when the delta load (process chain) completes it should send an email with number records loaded in to cube.
Please any one help me out on this issue. Thanks for your help in advance.
Thanks,
Raj.

I have tried for 0MAT_PLANT as yours.You can see the record count as 67 records. I have tested this on BI 7.0 SP 16
.I got mine as follows:
Test mail
Process ZI_8SMATGMP2_full_Man Of Type Execute InfoPackage Has Status Successfully completed (Process Chain Temp) Log for This Process: Data successfully updated Diagnosis The request has been updated successfully. InfoSource : ZNK_OP_MAT_PLANT Data type : Transaction Data Source system: BW1110 Log of Respective Background Job: Job started Step 001 started (program RSPROCESS, variant &0000000048822, user ID BTC_GBL_BW) Data saved successfully Start InfoPackage ZPAK_43YOZD7INDYOXD6WA8VV2Z257 InfoPackage ZPAK_43YOZD7INDYOXD6WA8VV2Z257 created request REQU_49G2VHO86U1Q27NQC52VN7F8G InfoPackage ZPAK_43YOZD7INDYOXD6WA8VV2Z257 Started In Process Chain ZTEMP; Generated Request: REQU_49G2VHO86U1Q27NQC52VN7F8G Job finished Information for Process Master data table: 0MAT_PLANT Data Type (D- Trans.Data, H - Hier., M - Mast. Data, T-Text): D PSA Table: 8SMATGMP2_BA
Number of Data Records Received: 67 Number of selected data records: 67 Request Number: REQU_49G2VHO86U1Q27NQC52VN7F8G
Edited by: Manga Paidikondala on Apr 11, 2008 12:35 PM

Activation date: March 19th and still without broa...

Hiya,
I'm really fed up now. I placed an order for phone and broadband on March 10th. I received BT hub after couple days but I haven't got any confirmation about activation date at first. Then I was told both will be activated on March 17th.. On March 17th I called customer service and I was told there's a problem with my order, no wonder.. Until then I haven't even gotten a phone number.. Finally someone from customer service was able to tell me what my number was but I was told I must wait 48 hours to get it activated..
Next day I received an email with completely different number and activation date scheduled on March 19th.. This was just ridiculous! But I waited until then just to find out that they activated only phone. I keep calling customer service since then and every time I hear the same story: there's a problem with the exchange, they will activate it but I need to wait 48 hours! I'm not even talking about false promises that someone from technical team will get in touch with me!
I'm really fed up right now and so close to cancel whole thing! I've never experienced such a bad customer service and I've never been that ignored in my entire life!

Hello Joapoa welcome to thre Forum I wish it was in more positive circumstances.
This sounds like a really disapointing and frustrating experience. I appreciate you have said now that you have cancelled your order and could as we speak already be with another provider.
Should you wish to place an order again I would like to help. If not please accept my apologies for the experience you have had.
You can contact me at [email protected]
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Data Load : Number of records count

Hi Experts,
          I want to document number of records transferred to BW during an infopackage execution.
          I want to automate the process by running a report in background which will fetch a data from SAP tables about number of records been transfered by all my InfoPackage .
I would like to know how should I proceed with.
         I want to know some System tables which contains same data as that of RSMO transaction displays to us.
Kindly help with valuable replies.

HI,
inorder to get the record counts report you need to create a report based on below tables
rsseldone, rsreqdone, rsldpiot, rsmonfact
Check the below link which explain in detail with the report code as well.
[Data load Quick Stats|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90215bba-9a46-2a10-07a7-c14e97bdb764]
This doc also explains how to trigger a mail with the details to all.
Regards
KP

Error on activation of data records from ODS object

hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated" and "Activation of data
records from ODS object ZPUR_O01 terminated"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated"
Please help me with this problem.

Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull

Error:Activation of data records from ODS object terminated

Hi All
i got error while loading the data "Activation of data records from ODS object terminated '
could you please tell me procedure how can i solve this issue?
regards
vasu.

- First check the Error Messages from the context menu of the activation step. Also check ST22 & SM21. This will tell you where the error is. Sometimes you might get duplicate records.
- Next use the "Manage" context menu for the ODS in RSA1. Check if any of the previous records are red. If its red, it would mean that either load/activation has failed for previous request which needs to be corrected first b4 you correct the current one.
- If al the above are OK, simply repeat the Activation step.
Hope this helps.
Regards
Anujit Ghosh

Activation Error in ODS - Record mode 0 unknown (data record REQU_4DPGJKCKN

I created a generic extractor in R3 with a generic delta. In BW, my delta init loads with no errors but when I activate the data in the ODS, I get the activation error.
"Record mode 0 unknown (data record REQU_4DPQ31IK7WM9OTK26S5JMJ6LM/000001/"
I searched SDN but didn't found anything, and I searched help but only found general information about 0recordmode.
Can someone provide a solution and/or some more detailed information about the error message?
Thanks

Hello,
When you have created the InfoSource for the generic datasource, have you added field 0RECORDMODE to the InfoSource? When loading data to a ODS, 0RECORDMODE is essential.
The InfoObject is usually mapped to ROCANCEL (Indicator: Cancel Data Record) field of the extractor. This field is usually present in Standard extractors. But even if the field is not present in your extractor, add it to InfoSource Communication structure and leave it unmapped in transfer rules.
I think this might solve the problem.
Regards,
Pankaj

ODS activation error"Activation of data records from ODS object terminated"

Hi All,
While activating ODS request I am getting following error
"Activation of data records from ODS object KFI02O50 terminated ".
data load is suceesful for ODS but during activation of the request it is giving error.
I tried to change the status to green manually & then activated the request but still same problem.
Also I tried to delete request & loaded again from PSA & then activated the request but still same problem
If anybody has some solution please let me know.
Thanks in advance
Regards
Sonal

Hi Sonal,
Sometimes when there is erroeneous records that time while activating the Request request get fails.To check this go to manage tab of the ODS there under log u can see the log icon click on that and check y activation got failed..
Assign points if its helpful
Regards,
vid.

How to create DB partitioning in active data tables for ods?

hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
haritha

Haritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu

Report with all Data Targets in Production and Record Count

Hi,
I am planning to create new report to handle some production maintenance work.
How do I create a report with list of each ODS and Cube and count of Active record count? Can I use any report in BW statistics and modify based on my requirements?
And also "Last Activation Date" is required.
Any suggestions? Please do let me know.
Thanks
Anand.

Hi,
The load might be taking too mucjh time as the system is busy.
wait for some time (30 mins) and see if the load goes thru
The load might have strucked up.
Change the request to red and reload data.
after doing initwith out data load, Run Delta.
Cheers,
Srinath.

DBIF_REPO_SQL_ERROR short dumps while activating data in ODS

Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error          DBIF_REPO_SQL_ERROR
Date and Time          08.01.2008 13:01:08
     1. A printout of the problem description (short dump)
        To obtain this, select in the current display "System->List->
        Save->Local File (unconverted)".
     2. A suitable printout of the system log
        To obtain this, call the system log through transaction SM21.
        Limit the time interval to 10 minutes before and 5 minutes
        after the short dump. In the display, then select the function
        "System->List->Save->Local File (unconverted)".
     3. If the programs are your own programs or modified SAP programs,
        supply the source code.
        To do this, select the Editor function "Further Utilities->
        Upload/Download->Download".
     4. Details regarding the conditions under which the error occurred
        or which actions and input led to the error.
     Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
     Please check the entries in the system log (Transaction SM21).
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     use the following search criteria:
     "DBIF_REPO_SQL_ERROR" C
     "SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
     "CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
    SAP Release.............. "640"
    Application server....... "psapdb"
    Network address.......... "158.58.65.11"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00CD615C4C00"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 22
    Short dump setting....... "full"
    Database server.......... "psapdb"
    Database type............ "ORACLE"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Oct 29 2006 20:49:57"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "155"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
    SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
    Client.............. 200
    User................ "R3REMOTE"
    Language key........ "E"
    Transaction......... " "
    Program............. "SAPLRSSM_PROCESS"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
     "CHECK_IF_ANALYZE_IS_NESSESSARY".
    The main program was "RSPROCESS ".
    The termination occurred in line 1143 of the source code of the (Include)
     program "LRSSM_PROCESSF04"
    of the source code of program "LRSSM_PROCESSF04" (when calling the editor
     11430).
    The program "SAPLRSSM_PROCESS" was started as a background job.
    Job name........ "BI_PROCESS_ODSACTIVAT"
    Job initiator... "RPRIYANKA"
    Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job:    BI_PROCESS_ODSACTIVAT / 02010102
Date       Time     Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05     SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.

The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem.

How to get the Data Record Number in BI 7.0?

Hi All,
In our requirement we need to load the Data Record Number in the DSO. I got the Request ID and Data Packet Number but not the Data Record Number.
Does anyone has any idea?

Hi......
When the data is activated in DSO, it is written to the table of active data, where it is then available for reporting. Requests are sorted by the key of the DataStore object, request ID, data package ID, or data record number.
You just load the data to the DSO.....and activate it.......it will autometically get generated.......You cannot load it from one DSO to other beacuse in this case Change log table is used........and this filed is in active table..........I think you need this fir reporting purpose.....so load it and activate the DSO......then it will be available in your active table for reporting.........because reporting is done on active table.......
Check this link :
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/49453cabf4ef6fe10000000a114084/frameset.htm
Hope this helps you....
Regards,
Debjani....
Edited by: Debjani Mukherjee on Sep 16, 2008 5:22 PM
Edited by: Debjani Mukherjee on Sep 16, 2008 5:25 PM

ODS - Number of Active Data Records count?

Similar Messages

Maybe you are looking for