Ods object

Hi friends,
can u explain briefly about
1) ods object sizing,
2)methods to report OLAP performance.
3)creation of transaction info cube
thanks
regards
mano

Hi Mano,
You have various docs on these topics in SDN, help.sap.com and service.sap.com.
See if these links help you:
http://help.sap.com/saphelp_nw04/helpdata/en/e6/bb01580c9411d5b2df0050da4c74dc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/b026dbac257c4495c9e9e901ed4d61/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/content.htm
Hope this helps.
Bye
Dinesh

Similar Messages

Error while activating ODS Object

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Linking two ODS objects using a multiprovider

Hello Gurus,
I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many.
My questions would be....
1)When the relationship is one to many can I set it up in the multiprovider to sum it up and show in the report?
2)I have 5 other charaterstics that I need to report(Slice and dice) on, but these are not common ones to both ODS objects. Is it possible for the user to get the report based on these charaterstics also? Or do I need to make sure that these 5 also exist in both DOS objects?
Thank you,
DM

Hi Sh,
Thank you very much for your reply. But I have few concerns.
1)One to many relationship will not have any effect on the data linking since the multiprovider clubs the key figures on common characteristics. I tried this on the system and it worked.
2)The problem would be not having similar characteristics on both infoproviders. So if I want to report on the chars individually it will have a problem( Will come as non assigned values)
But the documentation says the multiprovider supports Homogenous and Heterogeneous cases. Please refer the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
I am not sure what I can do now....whether to get all the characteristics in both infoproviders by enhancing the them. Or is there another way?
And lastly the scenario I am looking at is billing and cost of goods. So I might find records in cost of goods which may not have corresponding records in billing.(There can be goods in stock which need to be billed)The problem would be the way multiprovider link records(union) so it will have all the records from both sides even if they do not correspond to each other.
Let me know what you think.
Cheers,
DM

How to create ods object with overwrite option

Hi all,
I have two ods objects for Billing and Delivery and one cube for Sales.
Billing and Delivery ODS objects are based on item level data source while sales cube is based on Schedule line level data source.
Now i want to create a new ODS object which will get the data from these there object and update the ods object.Basically i want all the sales order attributes and billing quantity and delivered quantity from the ODS objects.
how to update the new ods object in overwrite mode ??/
Regards,
Viren.

HI,
yes OK but what i mean is that (you might have a perfect reason for this) normally it's nota good idea to have an info cube as a data source (for Performance, look-up reasons etc). If your goal is to load Billing/Delivery/Sales data into one ODS, then make sure that you model this correct.
If you want to use the ODS'es as data sources I would recommend you to use and ODS as data source also for the Sales data.
Kind regards
/martin

Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Error activating ODS object.

Hi Experts,
None of the ODS objects gets activated and following are the error messages that i get when i try to activate a ODS object :
Object ZRSMODS could not be activated

"
Message no. R7I028
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
Diagnosis
A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
Procedure
If you have not yet loaded data from this source system, delete the source system and then recreate it.
If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary.
Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
"
Pls send a solution asap. Thank you for the same.

Hi Aravind,
Have a look on the following points and see if they are satisfied in your case:
Check all characteristics involved as described below:
1. Check the Compounding and Attributes tabs in the characteristics maintenance.
2. All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
3. After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
Because of this you may sometimes get the same error while activating the ODS object.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Error on activation of data records from ODS object

hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated" and "Activation of data
records from ODS object ZPUR_O01 terminated"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated"
Please help me with this problem.

Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull

Error while activation of ODS Object.

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

don't post same issue twice. Bhanu working on your thread.
check this ...
Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Error while loading data to ods object from flatfile

hello all
Iam loading data from flatfile to ods object and the processing type is PSA and then to data target(package by package),data arrived in PSA(its green) but in monitor the request is in red and in details tab of subsequent processing its showing as ODS activation?(change-log):not yet activated and overall the error is Missing Messages.
and its also saying like "Activation of data records from ODS object ODS_SALES terminated.
and in help node its saying like data arrived in BW and try to change the request from red to green?
can anyone tell me what will be the problem?
In settings of ODS object everthing is set to automatically.
many thanks
balaji

Hi praveen
problem is generic here.
In monitor tab the request and overall the statuts is "RED",but when I went into the mange tab of ODS object here the request is "GREEN",but the data is not available here.but data is still available in "New data",how come data is not yet activated.
bcoz in settings all are set to "automatically",so there is no question of manual activation?
One more question is in Settings Iam finding one column like "Unique Data Records",whats's this,if v check this what happens ifnot what happens?
regrads
balaji

SAP BW ERROR OCCURS WHILE CREATING ODS OBJECT

HI TO SAP BW GURUS
AFTER CREATING ODS OBJECT,AND ODS OBJECT STRUCTURE,WHILE ACTIVATING THE STRUCTURE I AM GETTING MESSAGE AS
message : STDO:LOG COULDNOT BE WRITTEN ON OUTPUT DEVICE T
COULD ANYONE PLS TELL ME HOW TO RECTIFY THT
VENKAT

Read the information message carefully. Then proceed, if you intend to have custom "standard" texts (sort of an oxymoron, but everyplace I've been does this)...
If you are working in a customer system, only create standard texts using the following naming convention:
Initial letter Y or Z in the text name with any text ID
or
Initial letter Y or Z in the text ID with any text name

Table which stores the list of active ods objects in BW

Hi,
I am trying to find out the list of active ods objects starting with y and Z, Is there any table which has the information regarding that. For Infoobject I found the table as "RSDIOBJ". Can you plz let me know if there is any table for ods.
Thank you in advance,
Raghavendra Reddy BIjevemula

Hi Raghu,
u r typing it wrong..
its "RSDODSO"..
It will definitely work..
which gives all available ODS.
Regards-
MM

ABAP routine to join two ODS objects into one

Hi there,
i have two ODS objects related to each other. and i want to load them into another ODS object and join them so to say.
as far as i got now, it seems that the only way to do this is an ABAP routine in the update rules. ca nanyone give me a hint on how to do this? no clue how ABAP works yet.
i suppose there must be some template or something because i think others must have had the same issue before. anyone who already solved this?
i'd appreciate your help,
regards,
stefan

HI Stefan,
First add VTS_KUN (customer code)
VTS_BEDA (order date)
in ODS2 VTSNWBP2 and don't map to any field intransfer rule.
write this code in start routine of udpate rule between VTSNWBP2 and VTSNWBDN.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AVTS_NWBE00.
DATA: ...
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
 INCLUDE STRUCTURE /BIC/CS8ZODS2.
TYPES:
 RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
 MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
 DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
DATA: S_DATA TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
DATA: ITEM_TABLE TYPE STANDARD TABLE OF /BIC/AVTS_NWBE00
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
*start of modification
*Populating the order number data from ODS1 table
SELECT * FROM /BIC/AVTS_NWBE00 INTO TABLE ITEM_TABLE.
SORT DATA_PACKAGE BY VTS_BES ASCENDING.
SORT ITEM_TABLE BY VTS_BES ASCENDING.
LOOP AT DATA_PACKAGE INTO S_DATA.
 LOOP AT ITEM_TABLE WHERE VTS_BES = S_DATA-VTS_BES.
 MOVE-CORRESPONDING item_table to s_data.
 APPEND S_DATA.
 ENDLOOP.
ENDLOOP.
DATA_PACKAGE[] = S_DATA[].
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
*TABLES: /BIC/AVTS_NWBE00.--ODS1 table
Lemme know this is working.
Regards,
San!
Message was edited by: San!

Significance of BEx Reporting flag in ODS objects

Hello Masters,
I would like to know in detail, the Significance of BEx Reporting flag in ODS settings. What happens if we flag, and hat happedn when we dont ?
If, Transaction Data is loaded into the ODS, without loading the relevant Masterdata in advance, are SID's created, as it happens in cube ?
IS there a connection between SID's and ODS objects ?
best wishes,
i BI

Hi,
From SAP help : With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/content.htm
Hope this helps...

Report on standard ODS object and transactional ODS object

hi gurus
i have an infoset which is built on two transactional ODS objects and one standard ODS object which gets the data on regulr schedule. the transactional ODS obejcts get the user entered data.
when i query on the infoset, i am getting the data. and when i query on the standard ODS object i am getting the data. but when i am trying to create a query on the combination of the Infoset and the ODS object i am not getting the data.
is there any way to generate report on the standard ods object and Infoset from transactional ods objects.
your help will be greatly appreciated.
thanks in advance
vijaykumar

Hello ViJaY,
how r u ?
Try creating a MultiProvider with the Standard ODS and InfoSet.
Best Regards....
Sankar Kumar

IN ODS Object Manage tab?

hello all
In ods object manage tab in "REQUEST" tab there are options like request,data mart status of the request,PSA ID request is generated with Activation,Technical Status and so on?
what do v mean by this?
1.data mart status of the request(when this will generate)
2.PSA ID request is generated with Activation(when this will generate)and
3.Technical Status
many thanks
balaji

hi AHP
thanks for given info., but in that link I could'nt able to get info regarding this can u tell why this is needed "PSA ID REQUEST IS GENERATED WITH ACTIVATION"
and "TECHNICAL STATUS".
many thanks
balaji

Ods object

Similar Messages

Maybe you are looking for