ODS request could not deleted

Hi,
I am on BW 3.5 / SP 23.
I have an ODS which contain only full requests. Now I want to delete the two latest request.
In sm37 I receive following log:
DB Operation UPDATE failed (ODSR_3XP6Y6NN8JRY588L2WFABNHUP/000001/57) in rollback
Any idea?

Hi Pascal
What I would do in this case.
RSRV check of the DSO consistency .. If the check shows some inconsistency , I would try to Correct it from RSRV.
Then I will try to delete once again. Below note might be useful..
https://service.sap.com/sap/support/notes/998704
Yes, if you delete request from the above mentioned table , data should be deleted.
Regards
Anindya

Similar Messages

I download whats app and delete it an now i can't find it on app store..when i download from safari it write "your request could not be completed" tell what to to to find and download

i download whats app and delete it an now i can't find it on app store..when i download from safari it write "your request could not be completed" tell what to to to find and download

Go into your account in the App Store, sign out, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.], go back to the Apps Store, sign in and try again.

Since the IOS7 is installed i cant delete apps. 1/I hold the app till it wiggles but the cross does not appear; 2/ i could not delete it through i-tunes; 3/ i tried resetting the ipad-settings/general/reset/all then i get a restrictions password request?

Since the IOS7 is installed i cant delete apps. I tried the following with no result:
1/I hold the app till it wiggles but the cross does not appear;
2/ i could not delete it through i-tunes;
3/ i tried resetting the ipad through "settings/general/reset/all" then i get a restrictions password request whih i have no clue what it is (its not my unlock code)?
Is this a bug related to IOS 7 - I just installed the latest update also with no effect.
(I'm new to apple so any simple to understand advice is appreciated as my kids have added so many apps i can't add my music)

It appears that you have restrictions turned on in settings that prohibit app deletion. Is your iPad a personal possession or does it below to the company you work for?

Transport request could not be released

hi guys,
im trying to release a request thru se09
after successfully releasing the task.the request could not be released.
it gives this error message
TEST CALL OF TRANSPORT CONTROL PROGRAM (tp) ENDED WITH RETURN CODE 0212.
<removed_by_moderator>
Read the "Rules of Engagement"
Regards Walata
Edited by: Juan Reyes on Oct 13, 2009 4:40 PM

hi Mark,these are the results of the actions you specifiedWhen i tried to open the tp system log, this is wat i get"Could not open log file
wc40-altsapmnt ranslog"for the checksconnection test"connection to system DEV OK"transport directoryCheck transport directory 14.10.2009 10:36:27 DEV Development System Transport directory bin
wc40-altsapmnt rans in Create test file Read test file Delete test file buffer
wc40-altsapmnt rans uffer Create test file Read test file Delete test file cofiles
wc40-altsapmnt ranscofiles Create test file Read test file Delete test file data
wc40-altsapmnt ransdata Create test file Read test file Delete test file log
wc40-altsapmnt ranslog Create test file Read test file Delete test file sapnames
wc40-altsapmnt ranssapnames Create test file Read test file Delete test file tmp
wc40-altsapmnt rans mp Create test file Read test file Delete test file there is a ZIG ZAG arrow in front of each.while for the transport toolunder the tp interfacethe test was ok i.e. a green mark sign was there for all the items in the drop down listunder transport filethe check for path was marked okfor profile "tp profile cannot be read"for version "tp profile has an invalid formatunder RFC destinationthe test was ok i.e. a green mark sign was there for all the items in the drop down listunder tp callRFC and tp version successfulfor DBCONNECT "link to database failedoffline call "could not access file as supposedhow do i get the error information in the tp system log when i cant even view it
Regards WAlata

"Error in File : c:\DOCUME~1\ASPNET\LOCALS~1\Temp\temp_e9999.rpt; The request could not be submitted for background p

I have a legacy reporting system written in VB.net (2003). (SQL Server backend) (I have .Net 2005 on my PC). The reporting system opens and generates the Crystal Reports. In the past, the .rpt files could simply be updated and the users would see the new report. None of the original developers are at this company anymore.
Here is what is going on... I modified a report - saved it as a .rpt in CR XI. When we placed it in the proper directory - a vague error message is generated stating: "Error in File : c:\DOCUME1\ASPNET\LOCALS1\Temp\temp_e999999999999999.rpt; The request could not be submitted for background processing." (where 99999 = bunch of characters generated for storing the file.).
One strange thing is that this reporting system is running as a webservice on a webserver. So, why is it trying to store anything on the C drive?? In addition, when I search for the file - it does not exist.
So.... I decided to try the least offensive thing - open a report that HAD been working - save it in a previous version (CR 10) and move that rpt into the proper 'production' folder. Same error message/different temp file name.
I tried deleting crqe.dll from C:\WINDOWS\system32. I thought that might be a problem - but I still get the same error.
I just don't know what to try next. Any advice would really be appreciated.

The file that you are talking about is a temporary file that is generated while populating the report at clients side. This Temp file is used by Crystal to temporarily store data in it until the full report is ready to be displayed.
I am little confused as I am not sure if you are using VS2005 or VS2003 as VS2005 is not compatible with CR10. Is there any change made in the app or in server ?
AG.

Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. Pls help..

Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. This has been going on for the past 3 days already. Pls help..

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

The request could not be submitted for background processing.

Post Author: Chriss
CA Forum: Administration
It's an BOE XI SR2, on Win2k3 server, with a print cluster with two print spools, handling 3000+ printers. I discovered this error to be intermittent and only on one of the spools. It turned out that the only common factor was an HP4250 print driver. I backed all the 4250s down to 4200 drivers and the intermitent error ("Error in File. The request could not be submitted for background processing.") went from about 100 a day to zero. The other spool had a different version of the HP4250 driver and would on rare occassion cause this error, "Error in File ... Page header or footer longer than a page." but never the background processing error.
For reference, when I got this error in XI R1, this was the solution for 'the error with one name and many causes':The error "The request could not be submitted for background processing" can be related to a corrupt or wrong versioned crpe32.dll in the Crystal bin folder. Renaming to crpe32.dll_bak and using the repair command in the the "Add/Remove Programs" tool in the "Control Panel" will reinstall the correct dll. Then restart the Crystal services.

Post Author: krishna.moorthi
CA Forum: Administration
For Crystal reports :
Error : "The request could not be submitted for background processing"
I think,this was not related to a corrupt or wrong versioned crpe32.dll.
but the below mentioned is one of the reason for getting this error.
I got the error when the main report(crystalreports10) having more than 2 subreports not assigned proper tables for the subreports.
Example: (this code raise the abone mentioned error.)
rpt.SetDataSource(Exdataset);
rpt.Subreports["subreportname1"].SetDataSource(Exdataset); // Exdatatset.Tables[1]
rpt.Subreports["subreportname2"].SetDataSource(Exdataset);// Exdatatset.Tables[2]

Could not delete from specified table?

hi all,
i'm getting this error could not delete from specified table when i execute a delete on dbf file via JDBC-ODBC bridge, when i execute an update table command i get operation must use an updatable query, but i'm not updating the query returned from select statement.
Does anyone have similar problem before??

Hi,
my code is below:
try {
conn=DriverManager.getConnectio("jdbc:odbc:sui","","");
stmt = conn.createStatement();
int r= stmt.executeUpdate("Update Alarms set ACK=True WHERE DT = { d '" + msgdate + "' } AND TM= '" + msgtime + "'");
System.out.println(r+" records updated in Alarms ");
stmt.close();
conn.close();
stmt=null;
conn=null;
catch (NullPointerException e) {System.out.println(e.getMessage());}
catch (SQLException e) {System.out.println(e.getMessage());}
I have an ODBC datasource called sui and a table called alarms, i need to write into the column Ack to true when DT equals msgdate and TM equals msgtime, the error returned is Operation must use an updatable query.
I believe the SQL has no problem because there is no SQL syntax error and i'm not updating any resultset returned from select query.
When i delete, i get could not delete from specified table. Anyone has any idea wh'at's wrong?

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error in File UNKNOWN.RPT: The request could not be submitted for backgroun

I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
    Trust level: Full
    Application Virtual Path: /
    Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
    Machine name: FTG2009
Process information:
    Process ID: 3644
    Process name: w3wp.exe
    Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
    Exception type: CrystalReportsException
    Exception message: Load report failed.
Request information:
    Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
    Request path: /cgi-bin/crystaltest.aspx
    User host address: 70.173.237.72
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
    Thread ID: 5
    Thread account name: FTG2009\IWPD_1(yanoshftg)
    Is impersonating: False
    Stack trace:    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
   at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
    Sub CreateReport()
        Dim myReport As New ReportDocument
        'Try
        myReport.Load(Server.MapPath("CrystalReport.rpt"))
        'Catch ex As Exception
        'MsgBox(ex.InnerException.ToString)
        'End Try
        Dim g As Guid = Guid.NewGuid
        Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
        'Try
        Dim CrExportOptions As ExportOptions
        Dim CrDiskFileDestinationOptions As New _
        DiskFileDestinationOptions()
        Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
        CrDiskFileDestinationOptions.DiskFileName = _
                                    Server.MapPath(woPath)
        CrExportOptions = myReport.ExportOptions
        With CrExportOptions
            .ExportDestinationType = ExportDestinationType.DiskFile
            .ExportFormatType = ExportFormatType.PortableDocFormat
            .DestinationOptions = CrDiskFileDestinationOptions
            .FormatOptions = CrFormatTypeOptions
        End With
        myReport.Export()
        'Catch ex As Exception
        'MsgBox(ex.ToString)
        'End Try
        Response.Redirect(woPath)
    End Sub

Error: Your request could not be completed because a failure occurred while the report was being processed.

Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.

The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Request could not be submitted for background processing

Using Crystal Reports XI R2
 Using Visual Studio .NET 2005
 
 Here's the scenario. The client goes to run a report and specifies the filters they want for the report. We load a pre-built rpt with no saved data and pass the filters in to the report via the parameters. We then generate and export the report to another rpt file with saved data using the PULL method from the report itself. When the viewer wants to view the report the file (with saved data) is copied locally to the web server and the CrystalReportViewer control is pointed at the rpt with the saved data in it. In almost every case the reports come up fine and display in the viewer no problem. The error above (Request could not be submitted for background processing) tends to show itself in the CrystalReportViewer control whenever the report has large amounts of data (like 8 megs worth). I've tried everything I can find on this issue including the steps listed in the white paper for this issue.
 
 So just to be clear on the steps taken:
 1)If I take the saved rpt and open it in Crystal Reports itself then it works fine.
 2)If I point to the rpt with the CrystalReportViewer control in my development environment it works fine.
 3)I've run Process Monitor and there were a couple of access denied messages to one of the HKLM registry keys but I modified the permissions so those went away but the problem still remained
 4)As far as I can tell the report has no design issues. Nothing runs over any edges, no overlapping of any kind, the Font itself exists on the machine in question.
 5)Its not a dataset problem since the report is using the PULL method to generate itself plus the rpt with saved data is correctly generated its just showing the above error when trying to view it in the control.
 6)The client is using a WIndows 2003 server, with 4 Quad Core processors and 8 gigs of RAM and 100 gigs of hard drive space remaining (so hardware is not an issue)
 7)In code the ReportDocument object is inside a using statement (C# .NET) and only exist for the brief period needed to create the rpt with saved data. So they are getting closed and disposed of correctly. Also as pointed out above the rpt with saved data is already being generated correctly its just not displaying in the control.
 
 So to recap on a web server used by multiple people whenever a user tries to view a saved rpt file that has a large amount of data using the CrystalReportViewer control the error above tends to get generated even though the vast majority of the reports do display. I'm at a loss for what else to try to make the report display correctly in the control. Any thoughts would be helpful.

Make sure you are using SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Runtime
msm:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
msi:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
Other than that, I'd consider installing the CR designer - as a test, on the user machine and see if the designer can open the report.
Ludek

Pandora Radio no download. Says "Your request could not be completed." for original iPad

I cannot download the pandora app. I click on the "download now" button on their site when I am on my iPad, but when I get to the app store is says "Your request could not be completed." I looked for it on the app store and could not in it anywhere. Downloaded the newest OS, still nothing.

Never mind, figured it out. Because I had a Canadian apple ID, has to be American.

Time Machine Backup Error. Time machine could not delete the backup disk image .sparsebundle

Time Machine is giving an error message. Time Machine couldnt complete the backup. I am using the Seagate GoFlex Home. Error message states Time Machine could not delete the backup disk image "/volumes/Go Flex Home Backup/iMAc.sparsebundle". Does anybody have any ideas?

I have deleted all files in the Time Machine backup via Windows, Finder, and GoFlex UI.
I think this is your problem.. you need to follow the exact setup from seagate to get TM running again.. please read the manual... I do not have one but I do have another brand of NAS and setting up TM involves a fairly complex set of instructions.. because it is not a native Apple device.. your computer does not recognise it as TM capable.. you need to use the work around the manual will explain.

ODS request could not deleted

Similar Messages

Maybe you are looking for