ODS required for co-pa analysis
Hi friends
i have a doubt on copa data analysis.is it compulsory to extract data from data source to ods and then to infocube. right now we r working in mysap erp 2004 for our r/3 and bw 3.5. i have gone through configuration document for sap best practice available in help.sap.com.there they have not given any point about ods.pl advice me how i will do the configuration.
Thanks in advance and awaiting ur early reply.
Rgds
Tukuna
Hi Barick,
For COPA data it is not compulsory to create an InfoCube. You can directly get the data into the Cube. Can do the deltas.
At our client place, we are directly getting data into the InfoCube. So far no problems.
Hope this helps.
GSM.
Message was edited by: GSM
Similar Messages
-
Zip files required for Reporting and Analysis
Hi All,
Kindly share me the Zip files(File Name) required for configuring the Report and Analysis for the version 11.1.1.3.
Thank and Regards
ChiDamDepends which products, have a look at - http://docs.oracle.com/cd/E12825_01/epm.111/epm_install_11114/frameset.htm?ch02s02s03.html
It says 11.1.1.1.4 but just change it to 11.1.1.3
Cheers
John
http://john-goodwin.blogspot.com/ -
Required Field names for Creditor / Vendor Analysis.
Hi All,
i need to create a report for vendor analysis.
here i has no FN. Consultant at my client place.
i required field names that are to be considered to get TOTAL OUTSTANDING PAYMENT (as on due date and as on date)
for BSIK and BSAK.
Regards,
Srikanth.Hi Srikanth,
Required Field names for Creditor / Vendor Analysis:
1) Company code
2) Vendor
3) Fiscal year
4) Days in arrears (pendays)
Here,
BSIK table shows all open items (both due and not due) and BSAK table shows all the cleared items for Vendors / Creditors.
Regards,
Kiran. -
Required Help Regarding a report in HR for Human Resource analysis - MIS
Hi Friends,
i have a requirement for MIS report for Human Resource Analysis Report which have to display Head Counts Vs Cost for the employees at Employee Subrgroup and Grade wise....
Kindly suggest me how can go ahead with this...
for the example.... i am posting the format how the report will look like
Human Resource Analysis
Head Counts vs. HR Cost FTM
count cost
Top Management
GM
CGM
Vp
Total
like this for employee subgroupwise the costs and headcounts should display.
Regards,
SreeHariI attached smartform in NACE to LQCB output type but i should also make changes in report program RQCAAP01..can u please let me know what customizations i should do in tht report program to attach the smartform..
-
How many revolutions of data are required for order analysis?
Hello,
I have a requirement to collect, process, and save data for several hours at a user specified sampling interval. I suspect that I will need to use the speed of the motor to determine how many revolutions of data I am collecting.
Is there a minimum number of revolutions of data required for order analysis?
Thanks,
ChrisHI Chris,
Thank you for posting on the National Instruments forum. To determine how many revolutions of data that you are collecting, you will need to use the tachometer signal that is coming off of your motor and is defined as pulses per revolutions. With this, the absolute minimum that you need is two pulses to figure out how fast your motor is spinning. With only two pulses, however, it will be very hard to determine the order information.
I think this KB will help you in figuring out what Window Length you need when doing order analysis.
How to Select the Window Length When Extracting Orders with Order Analysis
Please let me know if the knowledge base article does not contain the information that you are looking for.
Thank You,
Nick F.
Applications Engineer -
Query for Sales Order Analysis
Dear Experts
I have written a Query for Sales Order Analysis and would like to have help on this.
The query is used for generating daily report for Sales Order on number of documents (Sales Order), total amount of sales orders and total GP of Sales Order. The query is written as below:
SELECT T0.[DocNum], SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
FROM ORDR T0 WHERE T0.[DocDate] =[%0] GROUP BY T0.[DocNum] ORDER BY T0.[DocNum]
where U_Total_GP is a UDF for storing the GP of each order.
After executing the query, a selection criteria of date appears and after a date is selected, the report shown information required. However, the query does not calculate column total for total amount and total GP. Although I know the total for each column can be displayed by pressing "Ctrl" + Click on the column title, it would have to be done from time to time.
Therefore, I would like to modify my query in order to calculate the column totals when executed. Are there any suggestions for this?
Thank you
Regards
EltonHi Elton,
Try this:
SELECT T0.[DocNum], SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
FROM ORDR T0 WHERE T0.[DocDate] =[%0] GROUP BY T0.[DocNum]
Union ALL
SELECT '', SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
FROM ORDR T0 WHERE T0.[DocDate] =[%0]
ORDER BY T0.[DocNum]
Thanks,
Gordon -
List of sql services required for deployment server?
What are the role of list of sql services in case of BizTalk, like notification service is required for BAM.
Along with can any one let me know the minimum services of SQL required on production.
1.Database Engine Services
SQL Server Replication
Full-Text Search
2.Analysis Services
3.Reporting Services
4.Shared Features
Business Intelligence Development Studio
Client Tools Connectivity
Integration Services
Management Tools – Basic
Is it mandatory to install analysis, integration services on production server.
Please suggest!
FredSorry, that is not correct. SQL components beyond Database Services are required in most circumstances.
It's important you understand what to install based on your application requirements.
The definitive guides can be found here:
BizTalk Server 2009:
http://www.microsoft.com/en-us/download/details.aspx?id=4066
BizTalk Server 2010:
http://msdn.microsoft.com/en-us/library/aa561167.aspx
BizTalk Server 2013:
http://msdn.microsoft.com/en-us/library/jj248688(v=bts.80).aspx
As a matter of practice, I always install all BizTalk realted SQL Server features, even if they are not used. This is for consistency across environments, reliable patching and to accomodate any future BizTalk app features. -
Standard report for customer Debtors analysis
Hi Everyone,
Can anyone pls let me know if there is any standard report for customer Debtors analysis .....
Thanks,
Srikanth.i dont have functional support, i need to develop a REPORT for Debitor Analysis so i required the tables used and field names of
input:
1) Customer Range,
2) Date Range.
output:
1) Customer
2) Total Outstanding Receible
3) Outstanding amount in days. i.e ( 0- 30, 30-60, 60-90, 90-120, >120 Days) .
please Help me.
Thanks in advance.
Regards,
Srikanth. -
so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Error:
Missing SRV record at DNS server 192.168.22.4:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
Title:
This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
Severity:
Error
Date:
7/3/2014 11:24:48 AM
Category:
Configuration
Issue:
The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
Impact:
Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
Resolution:
Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand. After that's done, on each DC run (and you can use a PowerShell window to run this):
Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
ipconfig /registerdns
net stop netlogon
net start netlogon
Then re-run the dcdiag /e /c /v.
Post your results, please.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine CM-DC1-NY01, is a Directory Server.
Home Server = CM-DC1-NY01
* Connecting to directory service on server CM-DC1-NY01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
DSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 3 DC(s). Testing 3 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC1-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC3-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC4-NY01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Advertising
The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC1-NY01 is advertising as an LDAP server
The DC CM-DC1-NY01 is advertising as having a writeable directory
The DC CM-DC1-NY01 is advertising as a Key Distribution Center
The DC CM-DC1-NY01 is advertising as a time server
The DS CM-DC1-NY01 is advertising as a GC.
......................... CM-DC1-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
[CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC1-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC1-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC1-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC1-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
......................... CM-DC1-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC1-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC1-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC1-NY01\netlogon
Verified share \\CM-DC1-NY01\sysvol
......................... CM-DC1-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC1-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC1-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC1-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC1-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 4609 to 5108
* rIDPreviousAllocationPool is 4609 to 5108
* rIDNextRID: 4629
......................... CM-DC1-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC1-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000002F
Time Generated: 07/08/2014 13:19:14
Event String:
Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
ew peer with this DNS name. The error was: The peer is unreachable.
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC1-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC1-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC1-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Advertising
The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC3-NY01 is advertising as an LDAP server
The DC CM-DC3-NY01 is advertising as having a writeable directory
The DC CM-DC3-NY01 is advertising as a Key Distribution Center
The DC CM-DC3-NY01 is advertising as a time server
The DS CM-DC3-NY01 is advertising as a GC.
......................... CM-DC3-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC3-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC3-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC3-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC3-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
......................... CM-DC3-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC3-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC3-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC3-NY01\netlogon
Verified share \\CM-DC3-NY01\sysvol
......................... CM-DC3-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC3-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC3-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC3-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC3-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15109 to 15608
* rIDPreviousAllocationPool is 15109 to 15608
* rIDNextRID: 15110
......................... CM-DC3-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC3-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC3-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC3-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC3-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Advertising
The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC4-NY01 is advertising as an LDAP server
The DC CM-DC4-NY01 is advertising as having a writeable directory
The DC CM-DC4-NY01 is advertising as a Key Distribution Center
The DC CM-DC4-NY01 is advertising as a time server
The DS CM-DC4-NY01 is advertising as a GC.
......................... CM-DC4-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC4-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC4-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC4-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC4-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
......................... CM-DC4-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC4-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC4-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC4-NY01\netlogon
Verified share \\CM-DC4-NY01\sysvol
......................... CM-DC4-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC4-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC4-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC4-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC4-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15609 to 16108
* rIDPreviousAllocationPool is 15609 to 16108
* rIDNextRID: 15609
......................... CM-DC4-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC4-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC4-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC4-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC4-NY01 passed test VerifyReplicas -
(Deployment) Minimum Software required for BUILD server and IIS WebServer
We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason -
SMD on SP15: no data for E2E Workload Analysis are shown
Hello!
I have successfully run Setup Wizard for the satellite solution "EP Portal on 6.40".
Unfortunately no data for E2E Workload Analysis are shown since more than one month.
I use SAP Solution Manager with SP 15, BI CONT 9
I have implemented the following SAP notes:
1088163, 1107804, 110782, 1119766
The jobs E2E_EXTRACTOR_CONTROLLER are running without errors.
Enclosed one of those for portal solution:
09.04.2008 E2E: Extractor Controller 1
EC: 09.04.2008 13:05:52 UTC Extractor Controller started for SID B11
EC: 09.04.2008 15:05:52 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 13:05:52 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:52 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:52 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:54 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/APPLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/APPLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/APPLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/DUMP_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
09.04.2008 E2E: Extractor Controller 2
ME: 13:05:54 UTC Calling Extractor /SDF/DUMP_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/DUMP_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/SYSLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/SYSLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/SYSLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/UPDATE_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/UPDATE_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
09.04.2008 E2E: Extractor Controller 3
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:55 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:55 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 13:05:56 UTC Receiving return code 6 from
E2E_JAVA_EXTRACTOR_IF
ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 13:05:56 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:57 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:57 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR
09.04.2008 E2E: Extractor Controller 4
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 08.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 08.04.2008 12 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 08.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR ,
Extractor Class:
ME: 13:05:58 UTC Receiving return code 98 from
/SDF/IDOC_THROUGHPUT_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:58 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:00 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_C_TRANSPORTS
09.04.2008 E2E: Extractor Controller 5
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:01 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
09.04.2008 E2E: Extractor Controller 6
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:06:02 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:02 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F55_XI_IDOC_ADAPTER
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:02 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:02 UTC Calling Extractor F55_XI_IDOC_ADAPTER
ME: No Data Found.
ME: 13:06:02 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_C_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
09.04.2008 E2E: Extractor Controller 7
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_SSR_EXTRACTOR_IF
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: Local Execution of Extractor.
EC: ME called in Multi-Mode.
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor E2E_SSR_EXTRACTOR_IF ,
Extractor Class:
E2E_SSR_EXTRACTOR_0CCMSATPH
ME: 13:06:06 UTC Receiving return code 0 from
E2E_SSR_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:06 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Any helpful information will be appreciated
regards
ThomSame problem being observed in our Solman system (SP15). Below are the errors observed in the spool output of E2E framework jobs,
1] ME: Data Loader Error occurred.
EC: 21:05:44 UTC Main Extractor raises exception. No Data returned by extractor.
2] No action - TSL parameter detected.
This extractor is not allowed to run outside time frame
3] ME: 21:05:45 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 21:05:45 UTC Main Extractor raises exception. No Data returned by extractor.
4] ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 21:05:46 UTC Main Extractor raises exception. No Data returned by extractor.
Tried referring E2E workload analysis guide...no use..the issues have not been covered in that. -
Steps required for cin configuration
hi,
can anybody give me the steps required for cin configuration.Hi,
CIN Setting:
Check Calculation Procedure
In this activity, you can check and, if necessary, change existing procedures for tax calculation.
Standard settings
Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
Note
In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
Recommendation
If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
Activities
If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
Procedure (pricing, output control, acct. det., costing,...)
Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
Example
Procedures are used, for example, in the following applications:
· Pricing in sales and distribution
· Applying overhead in Product Costing (costing sheets) and for CO internal orders
· Calculating accrued costs in Profitability Analysis
· Output control (printed confirmations, EDI messages, electronic mail)
· Account determination
· Calculating taxes on sales/purchases
· Calculating accruals in Cost Center Accounting
· Pricing for resource planning
Definition: condition type
Controlling (CO)
A distinction, in overhead calculation, is made between:
· Base condition types, which determine the object for which the overhead is to be calculated
· Overhead condition types, which define the percentage overhead to be applied
In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
Real Estate Management (RE)
An exact definition of a condition that specifies the amount paid for a specific service.
Condition types include:
· Basic rent
· Advance payment for operating costs
· Pest control
Sales and Distribution (SD)
A characteristic of a condition.
For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
Treasury (TR)
A characteristic of a condition used to classify financial transactions.
Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
Return ->
Definition: condition_type
Condition type
The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
Access sequence
With the access sequence you define
· the condition tables used to access the condition records
· the sequence of the condition tables
· which field contents are the criteria for reading the tables
Assign Country to Calculation Procedure
In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
Requirements
Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
Activities
1. Assign a procedure for tax calculation to every country with which your company has business dealings.
2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
Check and Change Settings for Tax Processing
In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
· Tax type
Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
· Nondeductibility of tax amounts
For this, tax amounts are marked as not deductible.
· Posting indicator
Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
· Tax not relevant to cash discount (Not discount relevant)
This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
Standard settings
Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
Recommendation
Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
Activities
If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
Note
You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
Internal processing key
The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
The processing keys are defined in the system and cannot be changed by the user.
Definition: posting key
Financial Accounting (FI)
A two-digit numerical key that determines the way line items are posted.
This key determines several factors including the:
· Account type
· Type of posting (debit or credit)
· Layout of entry screens
Return ->
Definition: posting_key
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each.
Definition: excise registration
Financial Accounting (FI)
An entity in India that is entitled by law to produce any goods liable to excise.
Each entity is assigned its own excise registration number.
Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
Return ->
Definition: excise registration
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Definition: excise group
Financial Accounting (FI)
A unit within an excise registration, in India, which keeps its own set of excise records.
Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
Return ->
Definition: excise group
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
· Define excise series groups based on type of outgoing document
· Assign series group to excise registration ID
· If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
· If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
Maintain Postal Addresses
Use
In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
You can then define a default local excise department for each excise group and a default customs department for each series group.
Definition: ARE-1 document
Logistics - General (LO)
A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
The form exempts them from paying excise duty when they remove the goods from their premises.
Return ->
Definition: ARE-1 document
Definition: ARE-3 document
Logistics - General (LO)
A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
The ARE-3 states what goods are being removed and which deemed excise license covers it.
Return ->
Definition: ARE-3 document
Maintain Subtransaction Type with Text
Sub Transaction Type
Sub transaction type is used for multiple purposes
Subcontracting:
It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Excise removals
Sub transaction type is also used for determining the accounts while doing excise removals.
With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
· If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
· If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Definition: condition-based excise determination
Logistics - General (LO
A method that the system uses of determining excise duty in India.
This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
Return ->
Definition: condition-based excise determination
Definition: formula-based excise determination
Logistics - General (LO)
A method that the system uses of determining excise duty in India.
This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
Return ->
Definition: formula-based excise determination
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
· Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
· Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
· Specify the conditions in the sales order that are used for excise rates.
· Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
Definition: basic excise duty
Financial Accounting (FI)
The main type of excise duty in India.
It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
Return ->
Definition: basic excise duty
Definition: additional excise duty
Financial Accounting (FI)
A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
Return ->
Definition: additional excise duty
Definition: special excise duty
Financial Accounting (FI)
A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
Return ->
Definition: special excise duty
Definition: cess
Financial Accounting (FI)
In India, a tax on the manufacture of certain products, mostly foodstuffs.
Return ->
Definition: cess
Definition: countervailing duty
Financial Accounting (FI)
A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
Return ->
Definition: countervailing duty
Define Tax Code for Purchasing Documents
Use
In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities
Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
Sales Tax Code
The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
Procedure
For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
Note
You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
Definition: tax code
Financial Accounting (FI)
A two-digit code that represents the specifications used for calculating and displaying tax.
Examples of the specifications defined under the tax code are:
· Tax rate
· Type of tax (input tax or output tax)
· Calculation method (percentage included or percentage separate)
Return ->
Definition: tax_code
Definition: tax rate
Financial Accounting (FI)
The percentage rate used to calculate the tax amount.
Return ->
Definition: tax_rate
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
· For taxes on purchases, use the condition types contained in the tax procedure.
· For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
Maintain Chapter IDs
Use
In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
Definition: chapter ID
Logistics - General (LO)
The number given to a material in the schedules of materials published by the government of India.
The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
Each material in the schedule is assigned its own identification code, called "chapter ID."
Example
The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
Return ->
Definition: chapter ID
Assign Users to Material Master Screen Sequence for Excise D
Use
In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
Standard settings
Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
Activities
1. Double-click User Screen Reference.
2. Assign all users who need to see the excise duty information to the screen reference IN.
Example
Name Screen Reference
MISHRA IN
Screen Sequence Number
Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
Note
When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
Dependencies
You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
Screen reference depending on the user
Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
Definition: user master record
User and Authorization Management (BC-SEC-USR)
Record that contains important master data for a user in the SAP System.
The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
Return ->
Definition: user_master_record
Define Form Types
Use
In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
Example
· Form type: CT3
· Form description: Concessional tax form
· Status: Receive
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
· VS1 (basic excise duty)
· VS2 (additional excise duty)
· VS3 (special excise duty)
· VS5 (sales tax setoff)
· MWS (central sales tax)
· MW3 (local sales tax)
· ESA (service tax)
· ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hold account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
· Excise group
· Company code
· Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
· Defined the G/L accounts
· Defined the excise groups
· Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Define Processing Modes Per Transaction
Use
In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
This way, you can tailor the transaction to what your users have to do.
Standard settings
The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
· J1IEX_C
This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
· J1IEX_P
This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
· J1IEX
In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
Activities
If the standard settings meet your requirements, do not do anything.
Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
2. In this activity, enter data as follows:
o Tcode: The transaction code that you have just created.
o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
o Active: Select this indicator to activate the setting.
Example
You might want to create a transaction that only allows users to display excise invoices.
Define Reference Documents Per Transaction
Use
In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
Activities
If the standard settings meet your requirements, you do not have to do anything.
Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
Definition: excise invoice reference document
Logistics - General (LO)
A document, in India, that you refer to when you enter an incoming excise invoice.
If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
Example
In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
Return ->
Definition: excise invoice reference document
Maintain Rejection Codes
Use
In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
Activities
For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
Specify Which Movement Types Involve Excise InvoicesUse
In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
Note
This option cannot be used for processing goods receipts without purchase orders.
Maintain Default Excise Groups and Series Groups
Use
In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
Activities
This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
Use
The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
Requirements
Before you continue with this activity, work through the following activities:
· Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
Maintain the Program, FORM routine, and the form for the output type.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
Enter the output device that you use.
Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
Maintain Movement Type Groups
Use
In this IMG activity, you group movement types together to form movement type groups.
Definition: movement type
Inventory Management (MM-IM)
A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
Return ->
Definition: movement type
Utilization Determination
Use
In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
You can either:
· Debit all the excise duty to one account
· Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
Example
If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
Acct name BED perc.
RG 23A BED account 50
RG 23C BED account 50
Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
Acct name BED perc. +
RG 23A BED account X
RG 23C BED account X
When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
Maintain Minimum Balances for Excise Accounts
Use
In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
Activities
Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
Specify SAPscript Forms
Use
In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
Standard settings
Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
Reg. name Lay. no. Form Tcode/Prog
RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
PLA 1 J_2I_PLA J_2IPLA
RG 23 D 1 J_2I_RG23D J_2IRG23
RG 1 1 J_2I_RG1 J_2IRRG1
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_3 J_2IRT12
The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
Number Ranges
You can maintain the number ranges for all CIN Number range objects using this transaction
Activities
Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
1. j_1iintnum
At an Excise group
1. j_1irg23a1
2. j_1irg23a2
3. j_1iRG1
4. j_1irg23c1
5. j_1irg23c2
6. j_1ipla2
7. j_1iintpr2
8. j_1irg23d
9. j_1irg1_t ( material level)
10. j_1iconpla ( if Consolidated PLA is used )
At Series group
1. j_1iexcloc
2. j_1iexcexp
3. j_1idepinv
4. j_1i57Fc ( 57F Challans -
New security required for managing rejections in UAR?
I have been told by someone at SAP about several new authobjs required for SP06 UAR "reject" features. Objects include:
ManageRejectionsGenerateAction
ViewManageRejectionReasons
ManageRejectionsCancelGenerationAction
ViewRejectUsers
ViewManageRejections
ViewReject
I'd like to find out more about these to determine if all these are needed by reviewers OR security administrators OR both. Anyone know where these are documented?
TIA,
hbWild solution...
1) Create a New User ID, which will be used for Just resetting the password based on the security question. This ID will have a password which everybody will know.
This ID will have only few authorizations.
2) Create a Custom Program which will take the User ID and the Question. Also some way of storing the Answer in some table (encrypted).
Based on the ID, the question of the user will be displayed. Based on the Input by the user, the answer will be checked.
3) If the answer is correct, reset the password and send a mail to the user id of the user. (Solution for resetting the password needs some analysis) The custom table will store user id, question, answer and the email id to which the email has to be sent.
Reward Points if useful.
Regards,
Abhishek Jolly -
Hi BPX Gurus,
Just attended SAP Summit06 at Mumbai and was introduced to this fascinating world of BPX's.
I have gone through some of the topics mentioned in this General Discussion forum and came out with real good insights.
For a starter, was just thinking what should be the skills required for becoming BPX in one's organization. I think it should be mix of some knowledge of applications (prevalent in the enterprise) + Netweaver + ESA.
Can we come out with a list so that things become clearer as days pass by?
Thanks for this oppurtunity given for sharing and getting views circulated to all !!!
Regards,
SatyaprakashHi Satyaprakash
As the term suggest a BPX is a business expert.
He must know very well the processes involved in the his business area and have a clear focus on reenginering and inprouving of these processes.
As the result of your AS is analysis you need to create a modelization of the to be processes and translate them in IT Values.
So the business reengineering brings you to the BPX technical aspects. Which tools can we use to resolve our gaps and estimate the technical effort .
After this you must trnaslate your analysis in code/customizing in the realization phases.
So this model brings us to the standard and well known ASAP Methodology: Business Blueprint (functional analysis), APplication Blueprint (Technical analysis) Realization, and Final Preparation.
Hope it helps
Ciao -
What are the data collection requirements for CAND?
Please explain the exact data collection requirements for CAND (Connected Analytics for Network Deployment). Thanks
CAND needs to collect the following show command outputs for analysis: show version, show running-config, show module (or show diag, depending on the platform).
Maybe you are looking for
-
ICC profile no longer installed so Photoshop (OS9 Classic ) won't print
Hello everyone What is an ICC profile? If I run my non latest Photoshop in the OS9 Classic environment on OS10 a message comes up that the ICC profile is no longer installed so it cannot print - what can I do? Bryony
-
Is there any OSS note for this DTP failure???
I have loading from DSO to open hub...using DTP.(BI 7 system).It fails frequently..can anybody suggest me some patches needed for this....I have got manual solution..but if somebody..give me OSS note etc..then it will be great help... regards, Neo
-
I'm trying to restore my backup but i forgot my password, how do i restore my password
I'm trying to restore my backup but i forgot my password. How do i go about in resting my password and restoring my iphone from my backup.
-
ECATT SAPGUI playback hanging..
Hello, I have just recorded some new test script using the SAPGUI driver. The recording looks good but when i play back my recording is script hang after the first command and I loose control. I have tried many execution option but the problem still
-
Problem in script: how to remove spacing
Hi Friends: In my form there is an amount printed like this: $ 50.0 in the scipt: $ is defined in some other window like this: ZD <S>PAY,,<J>$</>_______________________ amount is coming from other window like : &amount&. I made it &amount(C