ODS vs Cube Data

Hi Experts,
I have a query on Data between ODS and a cube.
I have only one row for a material number in the ods but has got many rows in the cube with negative (minus) sign on the key figures and when i use the aggregate option then the number of rows in cube and ods are same and with the exact result in both.
But where from these negative values fields come up which after summation gets removed as there is only one row in the ODS below it.
lets say for example
In ODS
Matnumber           plant                      Quantity
1                              Y                            3
In cubde
MatNumber                Plant                           Quantity
1                                   Y                                     3
1                                  Y                                     0
1                                    Y                                    3-
1                                   Y                                     3
because 30(-3)+3 = 3
and thus the aggregated result comes to be
MatNumber Plant Quantity
1          Y       3
now where dose these extra records come from and after aggregating i get the same result as of ODS
please clarrify how does these records with minus sign comes when there is only one row for paritcular material in the ODS below the cube
Points assured on helpful answer
thanks
puneet
Message was edited by:
        Puneet Chawla
Message was edited by:
        Puneet Chawla

Hello Puneet,
You get those records from change log table of ODS. Please check the changes Log table.
Thanks

Similar Messages

Ods to cube data load verry urgent

Hallo ALl,
i have started the int from ods to cube (data packet 1200000) and its talking hell of time there are 85 data packet, can some suggest me how can i seep up the data load.
regards sanjeev

hi
1) Stop the load first.check the job log and st22 if htere any shor dumps
2) go to the *8 gnerated infosource...
3) createa New IP.with the option as PSA and datatarget
4) it will take little time but it wont fail..
5) this will process package by package...
hope it helps
regards
AK

ODS to CUBE data failed

Hi,
Iam transfering the data from ODS to CUBE with out using PSA, data is coming to ODS properly but from ods to cube delta update is failed how should u updated from ods to cube with out distrubing the delta, plz clarify my dought, i will appreciate your help.
cheers,
manikanta

Hi,
We should find out the reason for uploading error. We can get the information sonetimes form M0nitor or from SM21 or from ST22. So find the cause of failure first.Then we can think about the solution to that problem.
With rgds,
Anil Kumar Sharma .P

ODS To Cube Data Load

Hi All,
I am loading data from ODS To cube both are daily delta loads.
Is cube get data from change log / active table of ODS ; remmber both are delta loads.
Please help ASAP.
Regards
Karuna

Dear Karuna,
1.WHEN DATA IS FIRST LOADED IN TO THE ODS IT IS PRESENT IN THE ACTIVE DATA TABLE,
2.WHEN YOU LOAD IT INTO THE CUBE CUBE WE HAVE TO ACTIVATE IT THAN THE DATA COMES TO THE CHANGELOG TABLE,
3. FROM THE CHANGELOG TABLE THE DATA GOES TO THE CUBE.
.....HOPE YOU GOT UR ANSWER
REGARDS
TRIOD

ODS and cube data

Hi All,
Please let me know the difference between ODS and Cube practically with a simple example. I red and know diferences but I did't get the concept.
1. What detail level reporting. How ODS supports this and not in Cube?
2 .When we go for ODS(daily/latest info) and Cube(monthly/ aggreated info )?
3.Where can we see the diff. I know overwrite & addition?
Please explain me with example.Surely I will assign points.
Thanks in advance.
Cheers,
Sri.

HI ALL,
Thanks for your immediate replies.
I did a file upload with full load to ODS:
1st load
======
CID PRICE QTY
C01 10 1000
C02 20 2000
C01 20 2000
In Active table & change logs:
======================
CID PRICE QTY
C01 20 2000
C02 20 2000
2nd load
======
CID PRICE QTY
C01 35 1500
C02 40 2200
C03 5 100
2nd load Active table
=================
CID PRICE QTY
C01 35 1500
C02 40 2200
C03 5 100
In Change table
======================
CID PRICE QTY
C01 20 2000 N
C02 20 2000 N
C01 35 1500
C01 20- 2000- X
C02 40 2200
C02 20- 2000- X
C03 5 100 N
I generate report on ODS, but we I can't see any details. It shows only latest info , what we have in Active table.
We can do the same detailed in info cube also, if we check DB aggregation.
I have a doubt:
customer orders in a day :
CID PRICE QTY DAY
C01 5 15 2007.05.03
C01 5 25 2007.05.03
C01 5 35 2007.05.03
C01 5 45 2007.05.03
we load this 4 times and overwrites evry time and see the latest record.
In ods : we can see :this only : latest :
C01 5 45 2007.05.03
In Cube: we can see
CID PRICE QTY DAY
C01 5 15 2007.05.03
C01 5 25 2007.05.03
C01 5 35 2007.05.03
C01 5 45 2007.05.03
and if we check DB aggregation. we can see
C01 5 120 2007.05.03 (summed all)
With my know knowlege we can see detail BW report on cube . all 4 records we can see , but in ODS we ca see this rec
C01 5 45 2007.05.03 only
Please explain , how ODS support detail record and cube supports summarized.
Thanks in advance.
Cheers,
Sri.

Reporting(ods to cube data)

hi friends,
i have 3 recodrs , i loaded from flat file to ods again i loaded ods to cube.
now i added 1 record in flat file. first i had sent delta to ods, again i had sent to cube. so in cube first 3 records and 1 recoprd delta.
if i will go to rrmx, i need to get all records(3 and delta 1 total 4 records). can i get 4 records in reporting or not.
Thanking u
suneel.

I am not really sure to understand your needs. In fact, do you want to aggregate all the records together or just show them in a report? If this is the last option which suits the more, you can include the request id in the structure of your query and then hide it in the properties.
If you just want to aggregate the records all together, the BW process will perform it for you.
Regards,
Cyril.

Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.

Hi,
My query is built on multiprovider. The data flow is data source u2013 ODS then ODS u2013 Info cube and multiprovider contains Info cube only.
Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.
The query results are not tie up ODS, Info cube ans Multiprovider(List cube).
Any one let me know why this is happening and how do I resolve it.
Regards,
Sharma.

HI;
thanks for help.
I resolved the issue in my own.
Regards,
Sharma.

Delta load from ODS to cube failed - Data mismatch

Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annie

Hi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

Error in updating data from ODS to CUBE.

Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
Value '04052007' for CHAR 0DATE is not plausible
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
REMOVED
Thanks In Advance.
Hitesh Shetty

Hello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k

Error while loading data from write optimized ODS to cube

Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.

please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi.

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

How to do reconcilization of ODS data and CUBE data

Hi All,
How to do reconciliation of ODS data and CUBE data,I know how to do reconciliation of R/3 data and BW data.
Regards.
hari

Hi,
create a multicube based on your ODS and cube, identify commen characteristics and perform the key figure selections; create then a query showing both information from the cube and ODS with perhaps some formula showing differences between key figures.
hope this helps...
Olivier.

ODS vs Cube Data

Similar Messages

Maybe you are looking for