ODTUG Hyperion SIG Elections Open Today!

This week ODTUG holds it's annual Hyperion SIG Elections. No matter who you vote for, I really hope you'll vote in the election. There is a collection of great folks running. The list includes several friends, associates, and compatriots. However, I hope after reading my running statements below, your decision will be a bit easier.
While I normally much prefer the "in the trenches doing" part over "self promotion", I want to take this time to self promote so that, if elected, I'll be able to DO even more.
Technology & service has been an integral part of my life for over 20 years, EPM products specifically for over 12 years. My ever growing passion for the Hyperion technology has reached the point, after consulting & developing for 12 years, that now I'm building a software product designed to make using and administering these products an even greater joy.
I've also found a great fit in ODTUG and the people who serve within it. By serving on the Hyperion SIG I can give back far more than just helping to stuff bags at the conference and helping with ambassador needs (yes, if you had a bag at KScope, it probably had some of my sweat on it).
As a business owner and independent software vendor I have the time, energy, experience, and freedom to be a willing steward for the ODTUG community and a dedicated, capable, and energetic contribute to the Hyperion SIG.
While these statements are more about the election, my overall dedication to ODTUG doesn't begin and end with the SIG; I will continue to contribute as a volunteer regardless of the election results, but I'm sure I'll be able to provide you the greatest level of service as part of the Hyperion SIG. Thanks for your support."
Regards,
Robb Salzmann
www.odtug.com

What Robb is thanking you for is in a very tight election, We have three new members of the Hyperion SIG board. Robb, Courtney Foster and Kevin Cox. Congratulations to them all. We had a good voter turnout and it was nice that so many were interested in helping on the board

Similar Messages

Please Vote - ODTUG Hyperion SIG Election Starts Today!

This week ODTUG holds it's annual Hyperion SIG Elections. No matter who you vote for, I really hope you'll vote in the election. There is a collection of great folks running. The list includes several friends, associates, and compatriots. However, I hope after reading my running statements below, your decision will be a bit easier.
While I normally much prefer the "in the trenches doing" part over "self promotion", I want to take this time to self promote so that, if elected, I'll be able to DO even more.
Technology & service has been an integral part of my life for over 20 years, EPM products specifically for over 12 years. My ever growing passion for the Hyperion technology has reached the point, after consulting & developing for 12 years, that now I'm building a software product designed to make using and administering these products an even greater joy.
I've also found a great fit in ODTUG and the people who serve within it. By serving on the Hyperion SIG I can give back far more than just helping to stuff bags at the conference and helping with ambassador needs (yes, if you had a bag at KScope, it probably had some of my sweat on it).
As a business owner and independent software vendor I have the time, energy, experience, and freedom to be a willing steward for the ODTUG community and a dedicated, capable, and energetic contribute to the Hyperion SIG.
While these statements are more about the election, my overall dedication to ODTUG doesn't begin and end with the SIG; I will continue to contribute as a volunteer regardless of the election results, but I'm sure I'll be able to provide you the greatest level of service as part of the Hyperion SIG. Thanks for your support."
Regards,
Robb Salzmann
www.odtug.com

What Robb is thanking you for is in a very tight election, We have three new members of the Hyperion SIG board. Robb, Courtney Foster and Kevin Cox. Congratulations to them all. We had a good voter turnout and it was nice that so many were interested in helping on the board

Hyperion SIG Elections Start Today!

This week ODTUG holds it's annual Hyperion SIG Elections. No matter who you vote for, I really hope you'll vote in the election. There is a collection of great folks running. The list includes several friends, associates, and compatriots. However, I hope after reading my running statements below, your decision will be a bit easier.
While I normally much prefer the "in the trenches doing" part over "self promotion", I want to take this time to self promote so that, if elected, I'll be able to DO even more.
Technology & service has been an integral part of my life for over 20 years, EPM products specifically for over 12 years. My ever growing passion for the Hyperion technology has reached the point, after consulting & developing for 12 years, that now I'm building a software product designed to make using and administering these products an even greater joy.
I've also found a great fit in ODTUG and the people who serve within it. By serving on the Hyperion SIG I can give back far more than just helping to stuff bags at the conference and helping with ambassador needs (yes, if you had a bag at KScope, it probably had some of my sweat on it).
As a business owner and independent software vendor I have the time, energy, experience, and freedom to be a willing steward for the ODTUG community and a dedicated, capable, and energetic contribute to the Hyperion SIG.
While these statements are more about the election, my overall dedication to ODTUG doesn't begin and end with the SIG; I will continue to contribute as a volunteer regardless of the election results, but I'm sure I'll be able to provide you the greatest level of service as part of the Hyperion SIG. Thanks for your support."
Regards,
Robb Salzmann
www.odtug.com

Thank you voters for coming out in a very tight election, We have three new members of the Hyperion SIG board. Robb, Courtney Foster and Kevin Cox. Congratulations to them all. We had a good voter turnout and it was nice that so many were interested in helping on the board
<thanks Glenn>
Regards,
Robb Salzmann

ODTUG - Hyperion SIG

Below is a copy of a letter that can be found on the ODTUG Hyperion SIG site (www.ODTUG.com), please take a minute to read when you have a chance.
Thanks
August 1, 2009
Dear ODTUG Members,
My name is Gary Crisci and I am the new president of the Oracle Development Tools User Group - Hyperion Special Interest Group. I wanted to take a moment of your time to introduce myself and the rest of the board and tell you a little bit about the ODTUG Hyperion SIG and what our plans are for this year.
Our SIG board is made up of some of the most talented individuals in this field. Angela Wilcox of JC Penney is our Secretary and Cameron Lackpour of InterRel is our website coordinator. Other members of the board are Doug Bliss of Ace Cash Express, Natalie Delemar of Randstad, Quinlan Eddy of Star Analytics, Jeff McAhren of HealthMarkets, Edward Roske of InterRel, Tim Tow of Applied OLAP, and John Weimar of Kerdock Consulting. I’m sure many of you recognize most of these names and would agree we have some of the best Hyperion talent on our board. We are also privileged to have Al Marciante of Oracle as a board advisor.
As president of the Hyperion SIG, my primary role is to lead the committee that organizes the Hyperion content for the Kaleidoscope conference and this is something the board and I are already working on. Kaleidoscope 2009 was a huge success. We were one of the only conferences this year to increase our attendance despite one of the worst economic climates in recent history. This is a testament to the quality of the speakers, presentations, and training featured at the Kaleidoscope conference. If you have not already checked it out, I would recommend going to the Kaleidoscope website (http://www.odtugkaleidoscope.com/) and having a look around. Our goal is to make Kaleidoscope 2010 an even bigger success, with more speakers, more presentation tracks, more vendors, and more attendees. Kaleidoscope has become the conference for Essbase developers, and as an Essbase developer I can assure you this will remain one of the primary focuses of the conference. However, the board and I plan to expand our scope further next year to provide more content for other areas of the Hyperion suite such as Planning, HFM/Enterprise, and our new friends at OBI. As developers, many of us on the board have worked on financial consolidation projects and recognize the development efforts that go into an HFM roll out. The developers that work on these projects are talented technicians and deserve a place to network and expand their skill set. We will provide them this opportunity at Kaleidoscope 2010.
I would like to ask all of you to start thinking about what you would like to see at Kaleidoscope next year and encourage you to reach out to me and the rest of the SIG board. The Kaleidoscope conference is your conference and I hope you will participate in helping us make it the best it can be. This invitation goes out to all members and non-members as well as vendors. In addition to building up user attendance at the conference, I have also made it a goal to increase vendor participation this year. So if you are a consultant or vendor, please reach out to us with your ideas.
Beyond the Kaleidoscope conference, one of my other major goals as president is to increase our SIG’s membership. If you are not a member of the ODTUG – Hyperion SIG, I would like to invite you to visit our SIG website (http://www.odtug.com/apex/f?p=500:320:0::::P320_SIG_ID:121) and consider becoming a member. ODTUG offers two membership types. There are paid members and associate members (associate membership is free). Paid members get the benefit of premium content and discounts to ODTUG events such as Kaleidoscope. Becoming a member of an industry group is one of the best things you can do for your career. I have personally gained so much from my industry affiliations. Beyond the networking opportunities and access to industry information, it is also something valuable to add to your resume. Participation in an industry group shows a dedication to your craft and represents you as a serious professional. I encourage all of you to join us if you are not currently a member. Additionally, please join the ODTUG Linkedin group (http://www.linkedin.com/groups?gid=1796201) as another way to be kept in the loop on communications with the board.
Lastly, I would like to take the opportunity to thank those of you who voted me back onto the board this year, and I would like to thank the Hyperion SIG board for entrusting me with the role of president. I consider it a privilege to serve on this board and in this capacity. I would also like to thank our outgoing president Edward Roske. Edward has committed himself, and his company, to the ODTUG Hyperion SIG in a way few individuals do. His tireless efforts have led to Kaleidoscope being the premier Hyperion conference and I can only hope to do as good a job as he has done. Lastly, I would like to thank the ODTUG board of directors for their overwhelming support of our group. ODTUG has stepped up in a way no other organization has to support the Hyperion community and their support has been unwavering. They have given us the opportunity to bring our culture and integrate it with their unique philosophy of how a user base community should be served, with an emphasis on training, and focus on the development of the individual. The enthusiasm demonstrated by ODTUG for Hyperion would lead you to believe they have been working with us for many years. They have truly welcomed us into their family and we appreciate it.
I would like to thank you for your participation in the ODTUG Hyperion SIG; our members are what make our group the best in the industry. Please do not hesitate to reach out to myself or any other member of the board if there is anything we can do for you.
Best regards,
Gary C. Crisci
Vice President, Morgan Stanley
President, ODTUG - Hyperion SIG
Oracle Ace
[email protected]
http://garycris.blogspot.com/

I love K-scope! It really has been the best conference for developing my knowledge and talent with Essbase. Thanks to Edward, Gary, and the rest of the Hyperion SIG board for all of your work.

Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

Please refer
Doesn't launch after 30 days | Installed as part of a CS6 suite

Cloud documents will not open today?

Local Pages documents on my Mac will open as normal. Cloud documents will not open today. They worked yesterday.
Does anyone else have this problem? And did you find a solution?
Many thanks
Iain

OK, I'm replying to my own post.
I have two documents saved to the Cloud which will not open on my iMac. When I tried to duplicate one in the "open" window, Mac OS brought up a warning that the document was being modified. When I checked it on my iPad the document did not exist. So something went wrong during a sync at some point. On the iPad I could duplicate the document and now I can edit the duplicate on my iMac.
Summary: at the moment it looks like sync problems with specfic documents and not a general problem.

Finder Shows all Mail Attachments as opened today - security question

Hi, I used wifi at a coffee shop and last night, when looking for files opened recently by uing the "search for all documents" function in the finder menu, it shows that practically all the attachments I've ever sent in Mail were opened TODAY. I haven't looked at some of these in over a year. No other files seemed to have been opened. Is it possible that someone got into my computer through the wifi network? I should note that this is a brand new macbook and as soon as I saw that all the files had been opened, I checked the system preferences and sure enough, "sharing" was enabled. Needless to say i disabled it right away. Anything else I can do?

Thanks, Barney. I ran Apple Disk Utility, as well as TechTool Deluxe and DiskWarrior, and the drive is fine.
To clarify, I don't think a hypothetical intruder would have copied one user account's folder onto the desktop of another deliberately. Ham-handedly, perhaps, but not deliberately. I'm not saying there was an intruder, but if there was, perhaps the person was attempting to copy the folder elsewhere (his own desktop?) and got sloppy or careless.
Here's are the things that raised the question in my mind.
-The desktop where the folder appeared was pristine -- no other objects on the screen. I think a system-created folder appearing on a clean desktop would have been placed in the upper right hand corner of the screen. This folder was not; it appeared about three inches from the bottom of the screen and four inches from the right edge.
-Of the several user accounts on the MacBook, the copied user account was one that would have contained the most personal information. The others are specially-purposed accounts with limited contents.

Saved Search - Last Opened Today

Hi. I want to make a Saved Search Folder in Finder, to show my Last Opened Today files. However, I don't want this including all the behind-the-scenes hidden files. I just want it to include the regular stuff that I look at, i.e. Images, Music, Movies, PDFs, Text Documents, Bookmarks, etc.
How do I program my Saved Search Folder to do this?

It's possible, but a little more involved. In Finder, you can do any/or searches if you set up a Raw Query. For more info, read the developer documents:
Query Expression Syntax
Spotlight Metadata Attributes
Supposedly, greater support for boolean commands will be part of Leopard.
http://www.apple.com/macosx/leopard/features/finder.html

Is BestBuy open today?

I want to purchase this laptop in store today but I was wondering if the stores in San Francisco are open today since it's Cesar Chavez Day holiday. Thanks for your time.

Oh yes, its open , Best Buy only closes on holidays such as Thanksgivings Day and Christmas. On New Years Eve, or New Years day , they may operate on limited hours such as a Sunday Schedule
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Somehow, i have 2 iPhoto libraries which I opened today. The one with the vast majority of my images does not allow me to export photos. What can I do to manage this situation?

With my MacBook Pro, OS X Yosemite, iPhoto 9.6, I find I have two iPhoto libraries. I discovered this when opening iPhoto today. One has only a few old images; the other, all current images. I cannot export images from the current image library. Can anyone enlighten me as to why I would have two libraries and how to resolve the issue of exporting?

What happens when you try to export from the library? Where are you trying to export to? Are both libraries located in the same Place? If not where are they located. If on an external HD how is that HD formatted?
How much free space do you have on your HD(s)?

Why can't I open emails in my inbox that arrived before today - I can open today's messages and I can open earlier emails tha are stored in other folders

Yesterday I had a message that I could not "get mail" because my inbox was full and that I should delete some files or compact. It only had about 20 messages in it but I had ignored suggestions that I compact for a while so I went to the menu and hit compact. Then I could get mail and I could open it while it was in my inbox.
This morning I got mail and I was able to look at it and I deleted quite a lot. A little later (I had restarted my computer in the meantime) I wanted to look at an email in my inbox. It appeared to open but had no content at all. Similarly when I looked at the message at the bottom of the screen it did not show there at all. The only messages in my inbox that I can look at are the two that arrived today.
I am able to open messages that are stored in other folders. But moving a message from the inbox to a folder does not make it able to be opened.
Another odd thing; in the inbox, one message that I can open shows the wrong sender - the sender of a message I had been moving to see if it could be opened if it were stored elsewhere; but the sender is correct when I open the message.
It is all very weird.

This sounds like you do have a corrupted Inbox file.
First of all create a backup of your profile folder.
http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Backing_Up_and_Restoring
Then try to repair Inbox.
Right-click Inbox - Properties - Repair Folder

Hyperion Planning Not Opening Through Workspace

Hi ,
We are facing problem in opening the EPMA planning application through workspace. After login into the workspace when we open planning application it is just getting hang and after so long time we get below message
===================================
Loading the Module 'HyperionPlanning.planning' failed.
The Operation was times out.
===================================
Restarting the Hyperion services does not resolved the issue.
We can login to the shared service , workspace and other Hyperion modules , however Hyperion Planning is not working.
Could you please advice where would be the problem and How I should go ahead to resolve this issue
Thanks ,

Hi John ,
Please find below log from HyS9Planning-sysout.log file
=============================================================================================
<06-Feb-2013 10:08:22 o'clock GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<06-Feb-2013 10:08:22 o'clock GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<06-Feb-2013 10:08:22 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<06-Feb-2013 10:08:30 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<06-Feb-2013 10:08:35 o'clock GMT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<06-Feb-2013 10:08:35 o'clock GMT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<06-Feb-2013 10:08:35 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-Feb-2013 10:08:35 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<06-Feb-2013 10:08:37 o'clock GMT> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<06-Feb-2013 10:08:37 o'clock GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log00113. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log.>
<06-Feb-2013 10:08:37 o'clock GMT> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
<06-Feb-2013 10:09:03 o'clock GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<06-Feb-2013 10:09:13 o'clock GMT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of Planning0 has been migrated to backup server and the backup server is accessing the TLOG of Planning0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<06-Feb-2013 10:09:14 o'clock GMT> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<06-Feb-2013 10:09:14 o'clock GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\access.log00147. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\access.log.>
<06-Feb-2013 10:10:09 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<06-Feb-2013 10:10:09 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Domain location is 'D:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
Checking D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
EPM_ORACLE_HOME: D:\Oracle\Middleware\EPMSystem11R1
Template for PLANNING#11.1.2.0: D:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
Dependencies for D:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
BPMUI shared webapp not referenced from PLANNING#11.1.2.0
Application name: PLANNING#11.1.2.0
Application source: HyperionPlanning.ear
Server name: Planning0
Server port: 8300
Server SSL port: 8343
Application context: HyperionPlanning
Registry product type: PLANNING_PRODUCT
Registry physical web application type: PLANNING_WEBAPP
weblogic.Name property is 'Planning0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for PLANNING#11.1.2.0
EPM_ORACLE_INSTANCE: D:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for PLANNING#11.1.2.0
loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
Planning locale: en_GB
<06-Feb-2013 10:11:25 o'clock GMT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<06-Feb-2013 10:11:25 o'clock GMT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
<06-Feb-2013 10:11:30 o'clock GMT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<06-Feb-2013 10:11:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<06-Feb-2013 10:11:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<06-Feb-2013 10:12:01 o'clock GMT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 20:12:27 GMT 2002,
To: Tue Mar 22 20:12:27 GMT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.94.154.47:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.96.172.50:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.94.154.47:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.96.172.50:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<06-Feb-2013 10:12:01 o'clock GMT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
<06-Feb-2013 10:12:01 o'clock GMT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<06-Feb-2013 10:12:01 o'clock GMT> <Warning> <Server> <BEA-002611> <Hostname "BRWBBPBPU.integration.net", maps to multiple IP addresses: 10.94.154.47, 10.96.172.50, 0:0:0:0:0:0:0:1>
<06-Feb-2013 10:12:07 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<06-Feb-2013 10:12:07 o'clock GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;D:\Oracle\Middleware\EPMSystem11R1/bin;D:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;D:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;D:\Oracle\MIDDLE~1\JROCKI~1\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
using Java property for Hyperion Home D:\Oracle\Middleware\EPMSystem11R1
========================================================================================================
Edited by: 946582 on 6 Feb, 2013 10:47 PM

I installed the trial version yesterday and used it ok but it won't open today???

hi, nothing too technical i hope but I downloaded the trial
version yesterday and was getting on ok. Today I cannot open the
program, i select the trial mode, clock continue and then it looks
like it is going to open up but closes leaving me looking at my
desktop. Does anyone know anything about this, they don't offer
technical help on trial versions.

It was my last resort! 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Walt F. Schaefer" <[email protected]> wrote in
message
news:[email protected]...
>> Did you reset your clock in the meantime?
>
> You don't miss a thing... I like that.
>
> Walt
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> Did you reset your clock in the meantime?
>>
>> You can try this simple fix -
>>
>> Quit DW.
>>
>> Find this folder -
>>
>> C:\Documents and
Settings\<username>\Application
> Data\Macromedia\Dreamweaver
>> 8\Configuration\WinFileCache-*.dat
>> (these folders are normally hidden - you may have to
use Explorer > Tools
>>
>> Folder Options to unhide them)
>>
>> and delete it.
>>
>> Restart DW. Works better?
>>
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "nickinboston" <[email protected]>
wrote in message
>> news:[email protected]...
>> > hi, nothing too technical i hope but I
downloaded the trial version
>> > yesterday
>> > and was getting on ok. Today I cannot open the
program, i select the
>> > trial
>> > mode, clock continue and then it looks like it
is going to open up but
>> > closes
>> > leaving me looking at my desktop. Does anyone
know anything about
>> > this,
>> > they
>> > don't offer technical help on trial versions.
>> >
>>
>>
>
>

7.0 will not open today!!! Please help

any idea why photoshop 7.0 will not open? it opens every morning for us but today it scrolls through the plug ins and goes back to desk top? now we are dead in the water.....need help!

If it worked yesterday and you have not made any changes in software or hardware I would reset the preferences.
This is a really old program, but if it is same as new ones click on photoshop icon to start and IMMEDIATELY hold down the Ctrl + Alt + Shift keys. You will get a reset window if done properly.
It is a little tricky so keep trying until you get the reset window.

Photoshop Elements 10 won't open today.

Yesterday I installed Photoshop Elements 10 on my new Lenovo desk top. Today it won't open. What should I do?

Operating system?
What are the exact steps you're doing, what do you see, and are there any error messages?
Ken

ODTUG Hyperion SIG Elections Open Today!

Similar Messages

Maybe you are looking for