OE:Item Validation Organization - view only your Org Items in SO Item LOV

HI All,
I am trying to set a profile so that I see only the items in my Organization in the Sales Order Item LOV in Order Management when I create a sales order.
Appreciate your input to achieve this.
Thanks,
Jo.

Thanks for this information...
We can specify only one Item validation org for one operating unit (OU) in Order management as well as in Purchasing.
Say we have total 5 orgs in OU, one is ITM item master and others are ORG1, ORG2, ORG3 and ORG4. Suppose ORG1 is an Item validation org...
Now if Oracle is going to validate attribute values against ORG1 only then problem may come... in case few attributes are controlled at organization level then same attribute can have different values in different orgs say the attributes are Purchasable and Customer order enables..
If the item is not purchasable and not Customer Order enabled in ORG1 (Item validation Org).. then do you mean it can't be sold or purchased in that OU??... I don't think so...
So I want to know what is the significance of having Item Validation Organization...ac
Thanks
Devendra Gulve
http://functionalguy.blogspot.com
Edited by: Deven.G. on Sep 2, 2010 12:04 PM

Similar Messages

Item Validation Organization is not Appearing in LOV in profile options

Dear All,
Item Validation Organization is not Appearing in LOV of the Profile options.
OE: Item Validation Organization
QP : Item Validation Organization
Regards,
John

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

QP: Item validation Organization & OE: Item validation Organization

Hi All,
Can you please tell me the difference between below two profile options.
1. QP: Item validation Organization
2. OE: Item validation Organization
Thanks in advance.

Naveed
1) You can use the child org as item validation org but typically, it is better to use the master org for this. This will help if you start using more child organizations.
2) No.
3) No effect
Hope this helps,
Sandeep Gandhi

ORA-20001: Please define the item validation organization in the Parameters

When Manual Inter company invoice is created following error is coming up and as per ‘Metalink’ the solution for this is to select correct operating unit for ‘Item Validation Organization’. Since there are no items involved [Standard Memo Lines used] I don’t need to setup this and so the solution don't work.
ORA-20001: Please define the item validation organization in the Parameters window in Order Management
ORA-06512: at “APPS.APP_EXCEPTION”, line 72
ORA-06512: at “APPS.ARP_TAX”, line 8216
ORA-06512: at “APPS.ARP_TAX”, line 8361
ORA-06512: at line 1
So can anyone help to avoid this error....
Edited by: 936837 on Aug 8, 2012 1:04 PM

936837 wrote:
When Manual Inter company invoice is created following error is coming up and as per ‘Metalink’ the solution for this is to select correct operating unit for ‘Item Validation Organization’. Since there are no items involved [Standard Memo Lines used] I don’t need to setup this and so the solution don't work.
ORA-20001: Please define the item validation organization in the Parameters window in Order Management
ORA-06512: at “APPS.APP_EXCEPTION”, line 72
ORA-06512: at “APPS.ARP_TAX”, line 8216
ORA-06512: at “APPS.ARP_TAX”, line 8361
ORA-06512: at line 1Please see these docs.
Error: Please define the item validation organization in the Parameters window in Order Management [ID 1163873.1]
Cannot Setup Salespersons [ID 344082.1]
Thanks,
Hussein

Whats Item validation org's significance?

Hi
I was trying to create a Sales Order and I was not able to find my item from the LOV. I was then told by a friend of mine that the item validation org parameter in OM setup>parameters shld be set to the item validation org.
My qns are whts the diff between item validation org and item master org?
Can they be same , if so wht are the disadvantages?
why at all its reqd? (one answer I got was that to increase perf of OM module it helps restricting huge item list as in a master org and gives subset of saleable items alone)
Thnx
Partha

Thanks for this information...
We can specify only one Item validation org for one operating unit (OU) in Order management as well as in Purchasing.
Say we have total 5 orgs in OU, one is ITM item master and others are ORG1, ORG2, ORG3 and ORG4. Suppose ORG1 is an Item validation org...
Now if Oracle is going to validate attribute values against ORG1 only then problem may come... in case few attributes are controlled at organization level then same attribute can have different values in different orgs say the attributes are Purchasable and Customer order enables..
If the item is not purchasable and not Customer Order enabled in ORG1 (Item validation Org).. then do you mean it can't be sold or purchased in that OU??... I don't think so...
So I want to know what is the significance of having Item Validation Organization...ac
Thanks
Devendra Gulve
http://functionalguy.blogspot.com
Edited by: Deven.G. on Sep 2, 2010 12:04 PM

Item Validation Org design

Hello Folks,
Are there performance recommendation or rules of thumb available
for constructing a item validation org design strategy within a
global enterprise? Today validation is predominately local, but
requirements are driving toward a central global approach. We
aretrying to find quantifiable data that helps us understand the
impact from a performance perspective to our forms users,
existing interfaces, and batch jobs (MRP runs).
Are there constraints from a Oracle perspective in terms of
deploying a global IVO strategy? What are they if so.
If you could respond to me directly and this list I would
appreciate it.
Best regards, Mike

Thanks for this information...
We can specify only one Item validation org for one operating unit (OU) in Order management as well as in Purchasing.
Say we have total 5 orgs in OU, one is ITM item master and others are ORG1, ORG2, ORG3 and ORG4. Suppose ORG1 is an Item validation org...
Now if Oracle is going to validate attribute values against ORG1 only then problem may come... in case few attributes are controlled at organization level then same attribute can have different values in different orgs say the attributes are Purchasable and Customer order enables..
If the item is not purchasable and not Customer Order enabled in ORG1 (Item validation Org).. then do you mean it can't be sold or purchased in that OU??... I don't think so...
So I want to know what is the significance of having Item Validation Organization...ac
Thanks
Devendra Gulve
http://functionalguy.blogspot.com
Edited by: Deven.G. on Sep 2, 2010 12:04 PM

Apexlib page item validation not shown correctly

Good morning guys! I have a question concerning the Apexlib page item validations.
Basically I just want to validate page item values and have errors displayed in a notification region on the very same page on submit.
I set up the Apexlib, which works perfectly for reports. However, when it comes to the page item validations, I am always rerouted to the Oracle Error page.
Do you know why or have you experienced similar problems?
Here is a part of the debug code when the error page is initialized.
Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: ...Process "ApplyMRU": MULTI_ROW_UPDATE (ON_SUBMIT_BEFORE_COMPUTATION) #OWNER#:VT_TBL_TOTHOLZ:CNT_TOTHOLZ
0.04: Branch point: BEFORE_COMPUTATION
0.04: Computation point: AFTER_SUBMIT
0.04: Tabs: Perform Branching for Tab Requests
0.04: Branch point: BEFORE_VALIDATION
0.04: Perform validations:
0.04: Branch point: BEFORE_PROCESSING
0.04: Processing point: AFTER_SUBMIT
0.04: ...Process "ApexLib-Before Computation/Validation": PLSQL (AFTER_SUBMIT) BEGIN ApexLib_Lov.clearLovNullValues; ApexLib_Item.validateItems; ApexLib_TabForm.validateColumns; -- ApexLib_Error.showErrorStack; END;
0.06: Show ERROR page...
If you have an idea please be so kind as to let me know!
Many thanks,
Seb

Hi Peter!
Thanks for having a look!
I am using Apex 3.2 and Apexlib 1.6!
Like I said, the report validations are functioning properly! It's just the error message is not displayed on the same page in a notification field. Instead the user is redirected to the original Apex Error Page when the error is caught.
What validation do I want to carry out?
I tried to verify the input of a text box with $APEXLIB_MAX_VALUE=10$.
I thought it might be a minor problem, which I couldn't find. Already checked the installation of Apexlib twice. Seems to be alright.
Best regards,
Seb
PS: Have a splendid WE

Items are not getting displayed in Sales Order Lines 'Ordered Item' field

Hi All,
Ordered Item field in Sales Order lines is not getting values When trying to create a Manual Sales Order.
When clicked on Ordered Item LOV, no values are getting displayed.
Thanks,
Chandra.

879035 wrote:
Hi,
I was unable to select any item (nothing is getting displayed in Ordered Item field when the LOV is clicked) in Sales Order Lines.
The Sales Order header information i was able to enter & generate the Order Number.
R12.1.3 is the version i am using.
Thanks,
Chandra.Have you done all the required setup in OM??
Like system parameters...Imp one would be Item Validation Organization
Make sure item is also available in the price list which you are using in order
Mahendra

Organization View for Succesion Planning-My Org. Units!

Hi,
We are in process of implementing Nakisa (Release: 301_701) with EHP4
for few components including Succession Planning.
We have completed Admin settings for Succession Planning. When we log
in to End User section for succession planning & go to My Work
Area>>Visualize>>My Org. Units- Initially it was giving error "Cannot
find the root of your orgchart. The orgchart box may have been deleted
or incorrectly specified, or no valid org structure can be found for
the selected effective date. Please change the root of the chart or
select another effective date".
After closer inspection & using debugging for RFC
HRMSS_GET_ORGSTRUCTURE_AS_XML, we got to know that there are few
Organization Views which are hard coded (somewhere) but were not
present in OADP configuration for MSS. These Org. views are (1)
TMC_O_S_CP_SUPO (2) TMC_O_S_CP_ORG (3) TMC_O_S_CP_POS. I tried to add
these Org. views with relevant configuration (not sure about it
correctness)in OADP configuration. Surprisingly, system has started
showing responsible Org. Unit for Talent specialist. But still it is
not showing all the Org. Units inside Responsible Org. Unit & also not
showing the positions inside it. I think I'm going wrong in assigning
Evaluation paths to these Object Selection rules because I do not know
the purpose of each of these Organization Views. I tried to find some
information in User guides & SDN but failed to got something relevant.
Please Help!
Prashant
+91-9975422262

Can you confirm that you have
Activated (in SAP) the business function HCM_TMC_CI_1 ?
Installed the Nakisa Add On?
Installed the Nakisa transport?
I don't recognise those view names. In the EhP4 system I'm looking at, these are the only TMC* views defined:
TMC_DI_REP_B     Direct Reporting Structure (Bottom Up)
TMC_DI_REP_T     Direct Reporting Structure (Top Down)
TMC_EE_DIR     Direct Reports
TMC_EE_ORG1     Employees from Organizational Units
TMC_EE_ORG2     Employees from Organizational Structure
TMC_EE_SRCH     Who's Who
TMC_FN_JF     Job Architecture (Top Down) Overview
TMC_FN_JF_C_S     Job Architecture (Top Down)
TMC_IN_REPTA_DT     Indir. Position Hierarchy (Top Down, 1 Level) with Data View
TMC_IN_REPTB_DT     Position: Successor (CP), Holder (P), SBS, Key, HAS_SUBP
TMC_IN_REP_B     Indirect Reporting Structure (Bottom Up)
TMC_IN_REP_B_DT     Indirect Reporting Structure (Bottom Up) with Data View
TMC_IN_REP_T     Indirect Reporting Structure (Top Down)
TMC_IN_REP_T_DT     Indirect Reporting Structure (Top Down) with Data View
TMC_MAN_DIR_REP     Direct Reporting Reporting Structure
TMC_O_SUCC_B     Successor of Org. Structure (Bottom Up)
TMC_O_SUCC_B_DT     Org. Structure Successor (Bottom Up) with Data View
TMC_O_SUCC_T     Successor of Org. Structure (Top Down)
TMC_O_SUCC_T_DT     Org. Structure Successor (Top Down) with Data View
TMC_S_C_JF_FN     Job Architecture (Bottom Up)

ICal To-Do's - Can I view only today's To-Do Items?

Currently using iCal 4.0.3...
Is there a way to view only today's To-Do Items rather than viewing the entire list of To-Do's.
Appreciate any help!
-Tyson

If you set your to do list to "hide items outside the calendar range," then sort the to do list by due date, you've got essentially the same thing without cluttering up the calendar or running the risk of getting to do's and events mixed up.
Duncan

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution?

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution? I'm using Andriod version 4.4.2 with kernal 3.4.0.

@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Need validation that ensures only one item has a value.

Hello,
I need a validation that ensures that only one item has a value. I want to allow a person entering information into a form to have the option to either select from a drop-down or enter something into a text box but not both.
I have found some information about validation of this type but I'm not sure how to use it. Here is what I found:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This validation ensures that only one item (ITEM_1, ITEM_2) has a value.
Example 5:
Assume a function similar to the following exists:
create or replace function sampleValidation (p_arg in varchar2) return boolean
as
begin
if p_arg= '1' then
return true;
else
return false;
end if;
end;
A validation of type PL/SQL Expression could then reference this function returning a boolean using the following syntax:
sampleValidation(v('MY_ITEM'))
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Please let me know how to implement this or give me another way to validate.
Thanks
Linda

Linda,
The best is to use a Validation of type PL/SQL Function Returning Error Text like this:
BEGIN
   IF :p1_item_1 IS NULL AND :p1_item_2 IS NULL
   THEN
      RETURN 'One of the items must have a value.';
   ELSIF :p1_item_1 IS NOT NULL AND :p1_item_2 IS NOT NULL
   THEN
      RETURN 'Only one of the items must have a value.';
   END IF;
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

SharePoint 2013 allows downloaded even for users with "view only" permissions

I have a new on premises SharePoint 2013 server and assigned a single user "view only" rights to a document library. In the "permission levels" window, this permission is described as "Can view pages, list items,
and documents. Document types with server-side file handlers can be viewed in the browser but not downloaded."
Once I gave the user that permission, I noticed he was able to view documents in the library but the "but not downloaded" part does not seem to be working. The user can still download documents to his local desktop and SharePoint does not prevent
it. The "download a copy" option appears and the user can use it.
My goal is to make all documents in this library such that users can only view them in the browser and not download a local copy. How I do that?
Thanks for your help.

Not entirely positive :-)
However, you have no server-side handlers in place today without WAC installed, so that portion of the View Only permission wouldn't be applicable.
Note that WAC must be installed on its own server and if your SharePoint server is extranet or public facing, it needs to have a valid, public SSL certificate. Also, WAC should always be run over SSL regardless if it is public facing or not as the token
sent between the SharePoint server and WAC is the same as having a username and password for the user making the request.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Slide views only to be reported, but grade is reporting to lms as 0 instead of n/a

My client has a number of quiz questions throughout their course. They asked that the quiz be set up to allow infinite attempts until the learner gets the answer right, and that there are no points or grade associated with the quiz. I've set up each question as a quiz question, but set the grade to be 0. I did it as a quiz question as there are matching type questions, multiple choice, etc. and I found it valuable to have the structure in place to add in the content. The reporting preferences are set up as to report back slide views only, but when this file communicates with the LMS, it is reporting back a pass/complete but giving a grade of 0. I'd like it to show up as n/a under the grade rather than 0.
Also, this course isn't booking marking and learners aren't happy because when they go back in their answers aren't saving. As well, the client wanted backward movement to be allowed but when the learner clicks the back button to go back through the slides, it automatically resets the question slides and they have to re-answer them to continue. Is there a way to change a setting so that the answers will stay in place?
And my last question (promise, sorry for so many) under the quiz settings and then required there are 4 options. I'm just wondering if anyone can explain these 4 options and what each do, so that I can make sure I'm selecting the best one. Up until now it's been a trial/error type of thing, but it would be great if anyone can share some additional info.

Thanks so much! I'm the only one working in Captivate, and so I can't even tell you how helpful it is to have replies and people that understand what I'm asking.
I looked into the manifest file, but I couldn't seem to find the masteryscore text. Here's a copy and paste of my manifest file. Am I missing something?
<?xml version="1.0" encoding="UTF-8" ?>
<manifest identifier="captivate client and family centred care_ID" version="1.3" xmlns="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="http://www.imsglobal.org/xsd/imscp_v1p1 imscp_v1p1.xsd
      http://www.adlnet.org/xsd/adlcp_v1p3 adlcp_v1p3.xsd
      http://www.imsglobal.org/xsd/imsss imsss_v1p0.xsd
      http://ltsc.ieee.org/xsd/LOM lomStrict.xsd">
<metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
<lom xmlns="http://ltsc.ieee.org/xsd/LOM">
   <general>
    <identifier>
     <catalog>Adobe Captivate Course</catalog>
     <entry>captivate client and family centred care_ID</entry>
    </identifier>
    <title>
     <string language="x-none">captivate client and family centred care_Course_Title</string>
    </title>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none"></string>
    </keyword>
   </general>
   <lifeCycle>
    <version>
     <string language="x-none">1.0</string>
    </version>
    <status>
     <source>LOMv1.0</source>
     <value>final</value>
    </status>
   </lifeCycle>
   <metaMetadata>
    <identifier>
     <catalog>test</catalog>
     <entry>test 1000</entry>
    </identifier>
    <metadataSchema>LOMv1.0</metadataSchema>
    <metadataSchema>SCORM_CAM_v1.3</metadataSchema>
   </metaMetadata>
   <technical>
    <format>text/html</format>
    <location>.</location>
   </technical>
   <educational>
    <typicalLearningTime>
     <duration>PT0H0M</duration>
     <description>
      <string language="x-none">Average length of time to experience this Adobe Captivate Project.</string>
     </description>
    </typicalLearningTime>
   </educational>
   <rights>
    <cost>
     <source>LOMv1.0</source>
     <value>no</value>
    </cost>
    <copyrightAndOtherRestrictions>
     <source>LOMv1.0</source>
     <value>no</value>
    </copyrightAndOtherRestrictions>
   </rights>
   <classification>
    <purpose>
     <source>LOMv1.0</source>
     <value>idea</value>
    </purpose>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none">Adobe Captivate</string>
     <string language="x-none"></string>
    </keyword>
   </classification>
</lom>
</metadata>
<organizations default="captivate client and family centred care_ID_ORG">
<organization identifier="captivate client and family centred care_ID_ORG">
   <title>captivate client and family centred care_Course_Title</title>
   <item identifier="captivate client and family centred care_ID_SCO" isvisible="true" identifierref="captivate client and family centred care_ID_SCO_RES">
    <title>captivate client and family centred care_SCO_Title</title>
    <imsss:sequencing>
     <imsss:objectives>
      <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="false">
      </imsss:primaryObjective>
     </imsss:objectives>
     
     <imsss:deliveryControls completionSetByContent="true" objectiveSetByContent="true"/>
    </imsss:sequencing>
    <adlcp:dataFromLMS>.</adlcp:dataFromLMS>
    <adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
   </item>
</organization>
</organizations>
<resources>
<resource adlcp:scormType="sco" identifier="captivate client and family centred care_ID_SCO_RES" type="webcontent" href="captivate client and family centred care.htm">
   <file href="captivate client and family centred care.swf"></file>
   <file href="captivate client and family centred care.htm"></file>
            <file href="SCORM_support/scorm_support.htm"/>
            <file href="SCORM_support/scorm_support.js"/>
            <file href="SCORM_support/scorm_support.swf"/>
</resource>
</resources>
</manifest>

Validation not working during Mass Change of Vendor Line Items

Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeep

Hello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi.

OE:Item Validation Organization - view only your Org Items in SO Item LOV

Similar Messages

Maybe you are looking for