OEAP 600 cannot join WLC with auth-list enable

I've got a strange problem here. In the office, my OEAP 600 can join WLC if there is no MAC authentication. When i enable MAC authentication at WLC, AP will fail to register. However, I try it at home and it works with both MAC authentication enable or disable. I suspect it is because of firewall in my office, but there shouldn't have any different in discovery and joining procedure for AP with MAC authentication enable or disable. I'm confused here. Please help.

Justin,
Below is error summary from WLC:
Last Error Summary
Last AP Message Decryption Failure----
Last AP Connection Failure     ---------      Timed out while waiting for ECHO repsonse from the AP
Last Error Occurred                ---------      Lwapp join request rejected
Last Error Occurred Reason    ---------      RADIUS authorization is pending for the AP
The error reason is probaly because I haven't added AP MAC address to ACS. With the same AP, at home using ADSL link, i have no problem.
Thanks.

Similar Messages

  • AP Cannot join WLC, i have RADIUS authorization is pending for the AP Error

    Hi Support,
    I'm new in installing WIFI, I have WLC 2504 using 7.4.100.0
    I have AP 1600 (AIR-CAP1602E-E-K9)
    I installed the WLC and AP in a cisco poe switch, wlc and ap are in the same subnet and can ping ap from WLC, but the AP cannot join the wlc. i have this error message
    (Cisco Controller) >show ap join stats detailed 00:06:f6:d6:03:f0
    Sync phase statistics
    - Time at sync request received............................ Not applicable
    - Time at sync completed................................... Not applicable
    Discovery phase statistics
    - Discovery requests received.............................. 124
    - Successful discovery responses sent...................... 124
    - Unsuccessful discovery request processing................ 0
    - Reason for last unsuccessful discovery attempt........... Not applicable
    - Time at last successful discovery attempt................ Jun 11 11:56:46.133
    - Time at last unsuccessful discovery attempt.............. Not applicable
    Join phase statistics
    - Join requests received................................... 62
    - Successful join responses sent........................... 0
    - Unsuccessful join request processing..................... 62
    - Reason for last unsuccessful join attempt................ RADIUS authorization is pending for the AP
    - Time at last successful join attempt..................... Not applicable
    - Time at last unsuccessful join attempt................... Jun 11 11:56:56.606
    Another this is from AP cli, i cannot have the command configure terminal
    Can you please help me

    Thanks Scott, i'm in Gabon (Central Africa) there is no Gabon in coutries list, then i chosen France.
    this is the new status
    (Cisco Controller) >show ap join stats detailed 00:06:f6:d6:03:f0
    Sync phase statistics
    - Time at sync request received............................ Not applicable
    - Time at sync completed................................... Not applicable
    Discovery phase statistics
    - Discovery requests received.............................. 126
    - Successful discovery responses sent...................... 126
    - Unsuccessful discovery request processing................ 0
    - Reason for last unsuccessful discovery attempt........... Not applicable
    - Time at last successful discovery attempt................ Jun 11 13:38:37.411
    - Time at last unsuccessful discovery attempt.............. Not applicable
    Join phase statistics
    - Join requests received................................... 63
    - Successful join responses sent........................... 1
    - Unsuccessful join request processing..................... 62
    - Reason for last unsuccessful join attempt................ RADIUS authorization is pending for the AP
    - Time at last successful join attempt..................... Jun 11 13:38:49.888
    - Time at last unsuccessful join attempt................... Jun 11 11:56:56.606
    Configuration phase statistics
    --More-- or (q)uit
    - Configuration requests received.......................... 0
    - Successful configuration responses sent.................. 0
    - Unsuccessful configuration request processing............ 0
    - Reason for last unsuccessful configuration attempt....... Not applicable
    - Time at last successful configuration attempt............ Not applicable
    - Time at last unsuccessful configuration attempt.......... Not applicable
    Last AP message decryption failure details
    - Reason for last message decryption failure............... Not applicable
    Last AP disconnect details
    - Reason for last AP connection failure.................... Timed out while waiting for ECHO repsonse from the AP
    - Last AP disconnect reason................................ Not applicable
    Last join error summary
    - Type of error that occurred last......................... AP got or has been disconnected
    - Reason for error that occurred last...................... Timed out while waiting for ECHO repsonse from the AP
    - Time at which the last join error occurred............... Jun 11 13:40:31.432
    AP disconnect details
    - Reason for last AP connection failure.................... Timed out while waiting for ECHO repsonse from the AP
    Ethernet Mac : 00:06:f6:d6:03:f0  Ip Address : 172.25.100.84
    --More-- or (q)uit
    (Cisco Controller) >

  • AP 360021 cannot join WLC 5508

    Dears,
    I have a cisco 5508 WLC and 40 cisco 360021 APs.
    I configured the WLC and assign the management interface IP and also configured a DHCP pool on my Cisco 4507 core switch wit option 43.
    But the problem that the APs connot join the WLC.
    The below message appears:-
    Nov  7 09:08:28.953: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Nov  7 09:08:28.954: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Nov  7 09:08:38.968: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Nov  7 09:08:39.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: x.x.x.x pe6
    *Nov  7 09:08:39.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
    Please support me to solve this issue.
    Regards,

    Dears,
    Also find the attched debug and the requirements that you asked for.
    AP cisco debug:
    *Oct 13 01:33:32.691: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Oct 13 01:33:34.691: %LINK-3-UPDOWN: Interface BVI1, changed state to up
    *Oct 13 01:33:35.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Oct 13 01:33:35.691: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
    *Oct 13 01:33:37.815: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Oct 13 01:33:37.903:  status of voice_diag_test from WLC is false
    *Oct 13 01:33:37.907: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
    *Oct 13 01:33:37.907: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:38.815: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:38.867: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:38.875: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Oct 13 01:33:39.191: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Oct 13 01:33:39.223: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.107.58, mask 255.255.255.0, hostname APfc99.47a2.2ef7
    *Oct 13 01:33:39.223: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Oct 13 01:33:39.899: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:40.899: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:43.191: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Oct 13 01:33:43.259: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.107.58, mask 255.255.255.0, hostname APfc99.47a2.2ef7
    *Oct 13 01:33:43.259: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Oct 13 01:33:47.907: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
    *Oct 13 01:33:47.907: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
    *Oct 13 01:33:47.907: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
    *Oct 13 01:33:47.907: %CAPWAP-3-ERRORLOG: Failed to process timer message.
    *Oct 13 01:33:48.315: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Oct 13 01:33:48.379: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to ad
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (10.10.18.1) (10.10.18.100)
    ministratively down
    *Oct 13 01:33:48.467:  status of voice_diag_test from WLC is false
    *Oct 13 01:33:48.471: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:49.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:49.431: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:49.439: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Oct 13 01:33:49.471: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Oct 13 01:33:49.471: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Oct 13 01:33:50.463: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:51.463: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:52.475: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:52.483: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Oct 13 01:33:53.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:53.507: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:54.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 23 23:47:46.583: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
    *Mar 23 23:47:46.583: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
    *Mar 23 23:47:46.583: %MESH-6-LINK_UPDOWN: Mesh station fc99.47a2.2ef7 link Down
    *Mar 23 23:47:47.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.107.5:5246
    *Mar 23 23:47:48.055: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Mar 23 23:47:48.119: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar 23 23:47:48.211:  status of voice_diag_test from WLC is false
    *Mar 23 23:47:48.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 23 23:47:49.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 23 23:47:49.171: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 23 23:47:49.179: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 23 23:47:50.207: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 23 23:47:51.207: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 23 23:47:51.215: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 23 23:47:51.223: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 23 23:47:52.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 23 23:47:52.247: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 23 23:47:53.247: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.10.107.5
    *Mar 24 00:25:36.579: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
    *Mar 24 00:25:36.579: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
    *Mar 24 00:25:36.579: %MESH-6-LINK_UPDOWN: Mesh station fc99.47a2.2ef7 link Down
    APfc99.47a2.2ef7#
    %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Mar 24 00:33:27.519: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Mar 24 00:33:28.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 00:33:28.035: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 00:33:28.043: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 00:33:28.051: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 00:33:29.079: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 00:33:30.079: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 00:33:32.519: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.107.5
    *Mar 24 00:33:32.523: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 00:33:32.531: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 00:33:33.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 00:33:33.555: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 00:33:34.555: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radi
    The Time on AP is not same time on the WLC
    Oct 13 01:34:13.411: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Mar 24 02:02:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.107.5 peer_port: 5246
    *Mar 24 02:02:36.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    User Access Verification
    Username:
    *Mar 24 02:02:36.011: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:02:37.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:02:37.035: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:02:38.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    Username:
    *Mar 24 02:03:05.999: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
    Username: Cisco
    Password:
    APfc99.47a2.2ef7>
    *Oct 13 01:34:13.411: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Mar 24 02:02:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.107.5 peer_port: 5246
    *Mar 24 02:02:36.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    User Access Verification
    Username:
    *Mar 24 02:02:36.011: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:02:37.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:02:37.035: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:02:38.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    Username:
    *Mar 24 02:03:05.999: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
    Username: Cisco
    Password:
    APfc99.47a2.2ef7>
    *Mar 24 02:04:31.603: %IP-4-DUPADDR: Duplicate address 10.10.107.5 on BVI1, sourced by 0006.f661.d880?
      memory  set memory parameters
    APfc99.47a2.2ef7#set
    *Mar 24 02:04:33.103: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-start
    *Mar 24 02:04:33.207: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
    *Mar 24 02:04:33.207: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
    *Mar 24 02:04:33.207: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
    *Mar 24 02:04:33.207: %CAPWAP-3-ERRORLOG: Failed to process timer messag
    APfc99.47a2.2ef7#
    *Mar 24 02:04:38.159: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Mar 24 02:04:38.223: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar 24 02:04:38.315:  status of voice_diag_test from WLC is false
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 24 02:04:38.315: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:04:39.223: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:04:39.275: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:04:39.283: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.107.5:5246
    *Mar 24 02:06:58.999: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Mar 24 02:05:59.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.107.5 peer_port: 5246
    *Mar 24 02:05:59.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:05:59.011: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:06:00.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:06:00.039: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:06:01.039: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    APfc99.47a2.2ef7#
    APfc99.47a2.2ef7#
    *Mar 24 02:09:50.999: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
    APfc99.47a2.2ef7#
    APfc99.47a2.2ef7#
    APfc99.47a2.2ef7#
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 24 02:10:20.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.107.5:5246
    *Mar 24 02:10:21.055: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Mar 24 02:10:21.123: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar 24 02:10:21.207:  status of voice_diag_test from WLC is false
    *Mar 24 02:10:21.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:10:22.123: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:10:22.175: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:10:22.183: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:10:23.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:10:24.211: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:10:25.787: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
    *Mar 24 02:10:25.787: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
    *Mar 24 02:10:25.787: %MESH-6-LINK_UPDOWN: Mesh station fc99.47a2.2ef7 link Down
    *Mar 24 02:10:30.211: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar 24 02:10:30.215: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:10:30.223: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:10:31.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:10:31.251: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:10:32.251: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 24 02:10:49.211: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar 24 02:10:49.215: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:10:49.223: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:10:50.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:10:50.251: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:10:51.251: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 24 02:11:08.211: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar 24 02:11:08.215: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:11:08.223: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:11:09.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:11:09.247: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:10.247: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:16.607: %IP-4-DUPADDR: Duplicate address 10.10.107.5 on BVI1, sourced by 0006.f661.d880
    *Mar 24 02:11:18.107: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Mar 24 02:11:18.211: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
    *Mar 24 02:11:18.211: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
    *Mar 24 02:11:18.211: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
    *Mar 24 02:11:18.211: %CAPWAP-3-ERRORLOG: Failed to process timer message.
    *Mar 24 02:11:23.163: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Mar 24 02:11:23.227: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar 24 02:11:23.319:  status of voice_diag_test from WLC is false
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 24 02:11:23.319: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:24.227: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:11:24.275: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:11:24.283: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:11:25.311: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:26.311: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:33.319: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar 24 02:11:33.323: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:11:33.331: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:11:34.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:11:34.355: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:35.355: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:11:43.319: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Mar 24 02:12:43.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.107.5 peer_port: 5246
    *Mar 24 02:12:43.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:12:43.011: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:12:44.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:12:44.035: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:12:45.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 24 02:17:05.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.107.5:5246
    *Mar 24 02:17:06.055: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Mar 24 02:17:06.119: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar 24 02:17:06.203:  status of voice_diag_test from WLC is false
    *Mar 24 02:17:06.207: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:17:07.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:17:07.171: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:17:07.179: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:17:08.203: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:17:09.203: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:17:10.787: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
    *Mar 24 02:17:10.787: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
    *Mar 24 02:17:10.787: %MESH-6-LINK_UPDOWN: Mesh station fc99.47a2.2ef7 link Down
    *Mar 24 02:17:15.207: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar 24 02:17:15.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:17:15.219: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:17:16.211: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:17:16.247: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:17:17.247: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:17:53.207: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar 24 02:17:53.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar 24 02:17:53.219: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 24 02:17:54.211: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 24 02:17:54.247: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 24 02:17:55.247: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar 24 02:18:01.607: %IP-4-DUPADDR: Duplicate address 10.10.107.5 on BVI1, sourced by 0006.f661.d880
    *Mar 24 02:18:03.107: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Mar 24 02:18:03.207: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
    *Mar 24 02:18:03.207: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Even
    Show requirement for AP:-
    APfc99.47a2.2ef7#show version
    Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 12.4(25e)JA, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Fri 27-Jan-12 21:27 by prod_rel_team
    ROM: Bootstrap program is C3600 boot loader
    BOOTLDR: C3600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(23c)JY, RELEASE SOFTWARE (fc1)
    APfc99.47a2.2ef7 uptime is 7 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap3g2-k9w8-mx.124-25e.JA/ap3g2-k9w8-mx.124-25e.JA"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP3602I-A-K9    (PowerPC) processor (revision A0) with 167926K/81920K bytes of memory.
    Processor board ID FGL1644Z15P
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.2.1.72
    1 Gigabit Ethernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: FC:99:47:A2:2E:F7
    Part Number                          : 73-14521-02
    PCA Assembly Number                  : 800-37501-02
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC16414A83
    Top Assembly Part Number             : 800-35852-02
    Top Assembly Serial Number           : FGL1644Z15P
    Top Revision Number                  : C0
    Product/Model Number                 : AIR-CAP3602I-A-K9
    Configuration register is 0xF
    show inventry
    NAME: "AP3600", DESCR: "Cisco Aironet 3600 Series (IEEE 802.11n) Access Point"
    PID: AIR-CAP3602I-A-K9 , VID: V01, SN: FGL1644Z15P
    show requirement on WLC
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.4.100.0
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
    Build Type....................................... DATA + WPS
    System Name...................................... Cisco_61:d8:84
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    Redundancy Mode.................................. Disabled
    IP Address....................................... 10.10.107.5
    Last Reset....................................... Software reset
    System Up Time................................... 0 days 1 hrs 4 mins 25 secs
    System Timezone Location......................... (GMT +3:00) Baghdad
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... IQ  - Iraq
    Operating Environment............................ Commercial (0 to 40 C)
    --More-- or (q)uit
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +40 C
    External Temperature............................. +24 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 1
    Number of Active Clients......................... 0
    Memory Current Usage............................. Unknown
    Memory Average Usage............................. Unknown
    CPU Current Usage................................ Unknown
    CPU Average Usage................................ Unknown
    Burned-in MAC Address............................ 00:06:F6:61:D8:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 100
    WLC after debug enable
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery resp:AC Name message element length = 58
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery resp: WTP Radio Information msg length = 67
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery resp: CAPWAP Control IPV4 Address len = 77
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery resp: CAPWAP Control IPV6 Address len = 99
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery resp: Mwar type payload len = 110
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery resp: Time sync payload len = 125
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery Response sent to 10.10.107.60:8944
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery Response sent to 10.10.107.60:8944
    *spamApTask6: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 WTP already released
    *spamApTask2: Mar 24 04:56:19.133: fc:99:47:a2:2e:f7 CAPWAP Control Msg Received from 10.10.107.5:8944
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 packet received of length 123 from 10.10.107.5:8944
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Msg Type = 1 Capwap state = 0
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Discovery Request from 10.10.107.5:8944
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 20
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Total msgEleLen = 94
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 msgEleLength = 40 msgEleType = 39
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Total msgEleLen = 50
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 41
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Total msgEleLen = 45
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 44
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Total msgEleLen = 40
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 msgEleLength = 10 msgEleType = 37
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Vendor specific payload from AP  54:78:1A:43:CA:D0 validated
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Total msgEleLen = 26
    (Cisco Controller) >*sshpmLscTask: Mar 24 05:02:01.461: sshpmLscTask: LSC Task received a message 4
    *Oct 13 01:33:48.191: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    User Access Verification
    Username:
    Username:
    Username:
    *Oct 13 01:33:50.191: %LINK-3-UPDOWN: Interface BVI1, changed state to up
    *Oct 13 01:33:50.191: %IP-4-DUPADDR: Duplicate address 10.10.107.5 on BVI1, sourced by 0006.f661.d880
    *Oct 13 01:33:51.191: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Oct 13 01:33:52.019: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
    *Oct 13 01:33:52.019: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
    *Oct 13 01:33:52.019: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
    *Oct 13 01:33:52.019: %CAPWAP-3-ERRORLOG: Failed to process timer message.
    *Oct 13 01:33:53.251: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Oct 13 01:33:53.315: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to ad
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)ministratively down
    *Oct 13 01:33:53.407:  status of voice_diag_test from WLC is false
    *Oct 13 01:33:53.411: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:54.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:54.367: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Oct 13 01:33:54.375: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Oct 13 01:33:55.399: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Oct 13 01:33:56.399: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 msgEleLength = 22 msgEleType = 37
    nable
    (Cisco Controller) >*spamApTask2: Mar 24 04:56:19.133: 54:78:1a:43:ca:d0 Vendor specific payload from AP  54:78:1A:43:CA:D0 validated
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Total msgEleLen = 0
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Join Priority Processing status = 0, Incoming Ap's Priority 4, MaxLrads = 100, joined Aps =0
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 1. 0 0
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 2. 232 3
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 3. 0 0
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 4. 100 0
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp: AC Descriptor message element len = 40
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 acName = Cisco_61:d8:84
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp:AC Name message element length = 58
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp: WTP Radio Information msg length = 67
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp: CAPWAP Control IPV4 Address len = 77
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp: CAPWAP Control IPV6 Address len = 99
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp: Mwar type payload len = 110
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery resp: Time sync payload len = 125
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery Response sent to 10.10.107.5:8944
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 Discovery Response sent to 10.10.107.5:8944
    *spamApTask2: Mar 24 04:56:19.134: 54:78:1a:43:ca:d0 WTP already released
    *spamApTask6: Mar 24 04:56:28.440: fc:99:47:a2:2e:f7 CAPWAP Control Msg Received from 10.10.107.60:8945
    *spamApTask6: Mar 24 04:56:28.440: 54:78:1a:43:ca:d0 packet received of length 123 from 10.10.107.60:8945
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Msg Type = 1 Capwap state = 0
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Discovery Request from 10.10.107.60:8945
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 20
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 94
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 40 msgEleType = 39
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 50
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 41
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 45
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 44
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 40
    *spamApTask7: Mar 24 04:56:28.441: fc:99:47:a2:2e:f7 CAPWAP Control Msg Received from 10.10.107.61:8945
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 10 msgEleType = 37
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 packet received of length 123 from 10.10.107.61:8945
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Vendor specific payload from AP  54:78:1A:43:CA:D0 validated
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Msg Type = 1 Capwap state = 0
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 26
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 22 msgEleType = 37
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Discovery Request from 10.10.107.61:8945
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 20
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Vendor specific payload from AP  54:78:1A:43:CA:D0 validated
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 94
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 40 msgEleType = 39
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 50
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 41
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Join Priority Processing status = 0, Incoming Ap's Priority 4, MaxLrads = 100, joined Aps =0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 45
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 1 msgEleType = 44
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 1. 0 0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 40
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 2. 232 3
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 10 msgEleType = 37
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 3. 0 0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Vendor specific payload from AP  54:78:1A:43:CA:D0 validated
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 4. 100 0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 26
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 msgEleLength = 22 msgEleType = 37
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Discovery resp: AC Descriptor message element len = 40
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Vendor specific payload from AP  54:78:1A:43:CA:D0 validated
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 acName = Cisco_61:d8:84
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Total msgEleLen = 0
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Discovery resp:AC Name message element length = 58
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Discovery resp: WTP Radio Information msg length = 67
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Join Priority Processing status = 0, Incoming Ap's Priority 4, MaxLrads = 100, joined Aps =0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 1. 0 0
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 2. 232 3
    *spamApTask6: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 Discovery resp: CAPWAP Control IPV4 Address len = 77
    *spamApTask7: Mar 24 04:56:28.441: 54:78:1a:43:ca:d0 3. 0 0

  • Cisco CAP2602E Cannot Join WLC 2504

    Dears,
    I have Cisco 2504 WLC version (7.0.220.0) configured, I'm trying to join AP CAP2602 but I got error messages as shown on the attached files.
    For the DNS I already created a record but still having the same eror message.
    Appreciate your support,

    You can do a direct upgrade to 7.6MR1 from 7.0.220, this is in the matrix.
    Be aware, if you use Prime Infrastructure(WCS) or MSE they too will need to be upgraded to support your WLC code. If you have these let me know and I will give you details on the upgrades I went through recently.
    The APs will upgrade with the WLC. You can predownload but it sounds like your deployment is small enough to not be an issue.
    Just be sure to hit the FUS upgrade while you are doing this, it is the most painful piece and will take 30-45 minutes. http://software.cisco.com/download/release.html?mdfid=283848165&softwareid=284364857&release=1.9.0.0&relind=AVAILABLE&rellifecycle=&reltype=latest

  • Cannot join network with ipod touch

    Please help - I just got the ipod touch and got the january software update. I want to have email & web surfing capability. When I try to join my home network, it asks for a password. I've tried my wireless network key, and my computer password. Nothing works. Does ANYONE know what I should do? Does this have anything to do with wireless network settings? Servers? Addresses? What information should I be entering onto the touch?
    Thanks!

    Hello and Welcome to Apple Discussions. 
    It wants your wireless network key when it asks for a password. It is worth proving the connectivity without security enabled but you don't want to remain like that for long.
    A WEP network key (plain text) must be 5 characters long for 40bit WEP or 13 characters long for 128bit WEP. If the WEP key is in hexadecimal (10 or 26 characters) try adding a $ infront of the key.
    Actually WEP can be cracked in a couple of miniutes so I'd advise switching your router to use WPA encryption. WPA is much more secure and you can use any password/key you wish.
    If you post the make/model number of your wireless router we can probably advise more.
    cheers
    mrtotes

  • Problem in accessing webservice over https with auth cert enabled...Urgent

    Hi All,
    I am stuck in accessing webservices using ssl and auth certificate.
    I am using jdk 6 and it is not any issue with the problem I am facing...
    This is what I do...
    I have a webservice deployed which is accessible over https.
    On server, I run..
    - to generate keystoye
    keytool -genkey -alias tomcat-sv -dname "CN=<Server Machine Id>, OU=X, O=Y, L=Z, S=XY, C=YZ" -keyalg RSA -keypass changeit -storepass changeit -keystore server.keystore
    generate server certificate
    keytool -export -alias tomcat-sv -storepass changeit -file server.cer -keystore server.keystore
    On client, i run..
    To generate client keystore-
    keytool -genkey -alias tomcat-cl -dname "CN=<Client Machine Id>, OU=X, O=Y, L=Z, S=XY, C=YZ" -keyalg RSA -keypass changeit -storepass changeit -keystore client.keystore
    To generate client certificate -
    keytool -export -alias tomcat-cl -storepass changeit -file client.cer -keystore client.keystore
    Thne I import server's certificate into client keystore and Client's certificate to server's keystore by
    import server's cer to client keystore -
    keytool -import -v -trustcacerts -alias tomcat -file "C:\java\jdk1.6.0_10\bin\server.cer" -keystore client.keystore -keypass changeit -storepass changeit
    inport client's cer to server keystore -
    keytool -import -v -trustcacerts -alias tomcat -file "C:\jdk1.6.0_06\bin\client.cer" -keystore server.keystore -keypass changeit -storepass changeit
    when i try to call webservices through a java client (which is called by a python script), I get error as
    *"Exception while waiting for close java.net.SocketException: Software caused connection abort: recv failed"*
    *"faultString: java.net.SocketException: Software caused connection abort: recv failed"*
    complete log is as following
    C:\apache-tomcat-6.0.10\webapps\webservice>tradereport.py
    Jun 23, 2008 3:05:59 PM currenex.share.log.CxLogger log
    INFO: details=before SSL change
    Jun 23, 2008 3:05:59 PM currenex.share.log.CxLogger log
    INFO: details=after SSL change
    log4j:WARN No appenders could be found for logger (org.apache.axis.i18n.ProjectResourceBundle).
    log4j:WARN Please initialize the log4j system properly.
    trigger seeding of SecureRandom
    done seeding SecureRandom
    %% No cached client session
    *** ClientHello, TLSv1
    RandomCookie: GMT: 1214213509 bytes = { 50, 7, 252, 244, 34, 192, 54, 190, 160, 197, 162, 65, 78, 3, 120, 182, 179, 199
    , 160, 208, 223, 247, 41, 216, 188, 138, 228, 70 }
    Session ID: {}
    Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_1
    28_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_
    DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA
    _EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WI
    TH_DES40_CBC_SHA]
    Compression Methods: { 0 }
    main, WRITE: TLSv1 Handshake, length = 73
    main, WRITE: SSLv2 client hello message, length = 98
    main, READ: TLSv1 Handshake, length = 7873
    *** ServerHello, TLSv1
    RandomCookie: GMT: 1214213504 bytes = { 98, 89, 26, 148, 19, 15, 45, 155, 163, 196, 220, 193, 150, 127, 19, 44, 130, 16
    5, 78, 243, 155, 34, 214, 123, 198, 89, 102, 15 }
    Session ID: {72, 95, 110, 128, 129, 101, 2, 252, 120, 147, 235, 106, 51, 210, 236, 197, 28, 197, 154, 236, 116, 85, 185
    , 177, 153, 9, 235, 160, 228, 124, 191, 206}
    Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
    Compression Method: 0
    %% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
    ** SSL_RSA_WITH_RC4_128_MD5
    *** Certificate chain
    chain [0] = [
    Version: V3
    Subject: CN=Anuj-Shukla, OU=X, O=Y, L=Z, ST=XY, C=YZ
    Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
    Key: Sun RSA public key, 1024 bits
    modulus: 1155910927093088021038703558200517321935975136532818479526927502986487608253029863427194046282623217778572406
    007584457425344367852682875007488075549568987019062497769571000978532532156228707400592262495876461712276454493567147822
    56749486566093981751121311864618619780132448329770352303648687445023336431685957
    public exponent: 65537
    Validity: [From: Mon Jun 23 14:17:18 GMT+05:30 2008,
                   To: Sun Sep 21 14:17:18 GMT+05:30 2008]
    Issuer: CN=Anuj-Shukla, OU=X, O=Y, L=Z, ST=XY, C=YZ
    SerialNumber: [    485f6316]
    Algorithm: [SHA1withRSA]
    Signature:
    0000: 48 05 F9 A9 89 C6 87 83 C4 02 C4 44 F4 7C A0 54 H..........D...T
    0010: F6 9A 57 69 F0 DB 37 79 FD 8F 90 E9 8F 3E C2 DB ..Wi..7y.....>..
    0020: 9F D7 CC 15 28 0A 73 80 0A DC D0 7F EC 1C EE BD ....(.s.........
    0030: 23 EF E7 28 79 F3 7F C7 CC 7D A6 C6 F7 59 9A 17 #..(y........Y..
    0040: 73 ED 8B FF 6A 76 7F F7 4F 97 48 DF 23 A6 4C 42 s...jv..O.H.#.LB
    0050: B2 B4 5C 00 D0 77 88 12 F4 97 4E 66 7C EE F0 66 ..\..w....Nf...f
    0060: E6 95 8C B1 58 BF C5 E8 B5 64 A3 D5 5E EA 07 02 ....X....d..^...
    0070: FE 3D 63 7F F4 0B DC 86 66 B7 4B 4F 0C 1C 69 0F .=c.....f.KO..i.
    *** CertificateRequest
    Cert Types: RSA, DSS
    Cert Authorities:
    <CN=GlobalSign Root CA, OU=Root CA, O=GlobalSign nv-sa, C=BE>
    <[email protected], CN=Thawte Personal Freemail CA, OU=Certification Services Division, O=Thawte
    Consulting, L=Cape Town, ST=Western Cape, C=ZA>
    <[email protected], CN=Thawte Server CA, OU=Certification Services Division, O=Thawte Consulting cc,
    L=Cape Town, ST=Western Cape, C=ZA>
    <CN=AddTrust Qualified CA Root, OU=AddTrust TTP Network, O=AddTrust AB, C=SE>
    <CN=Equifax Secure Global eBusiness CA-1, O=Equifax Secure Inc., C=US>
    <CN=GTE CyberTrust Global Root, OU="GTE CyberTrust Solutions, Inc.", O=GTE Corporation, C=US>
    <CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE>
    <CN=Entrust.net Client Certification Authority, OU=(c) 2000 Entrust.net Limited, OU=www.entrust.net/GCCA_CPS incorp. by
    ref. (limits liab.), O=Entrust.net>
    <OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US>
    <CN=DigiCert High Assurance EV Root CA, OU=www.digicert.com, O=DigiCert Inc, C=US>
    <CN=Baltimore CyberTrust Code Signing Root, OU=CyberTrust, O=Baltimore, C=IE>
    <CN=TC TrustCenter Class 4 CA II, OU=TC TrustCenter Class 4 CA, O=TC TrustCenter GmbH, C=DE>
    <OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 2 Public Primary Certificat
    ion Authority - G2, O="VeriSign, Inc.", C=US>
    <OU=Class 2 Public Primary Certification Authority, O="VeriSign, Inc.", C=US>
    <CN=Entrust.net Secure Server Certification Authority, OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS incorp. b
    y ref. (limits liab.), O=Entrust.net, C=US>
    <CN=TC TrustCenter Universal CA I, OU=TC TrustCenter Universal CA, O=TC TrustCenter GmbH, C=DE>
    <[email protected], CN=Thawte Premium Server CA, OU=Certification Services Division, O=Thawte Consu
    lting cc, L=Cape Town, ST=Western Cape, C=ZA>
    <CN=Entrust.net Client Certification Authority, OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/Client_CA_Info/CPS i
    ncorp. by ref. limits liab., O=Entrust.net, C=US>
    <CN=VeriSign Class 3 Public Primary Certification Authority - G3, OU="(c) 1999 VeriSign, Inc. - For authorized use only"
    , OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US>
    <[email protected], CN=http://www.valicert.com/, OU=ValiCert Class 2 Policy Validation Authority, O="ValiCe
    rt, Inc.", L=ValiCert Validation Network>
    <CN=AddTrust Class 1 CA Root, OU=AddTrust TTP Network, O=AddTrust AB, C=SE>
    <CN=DigiCert Global Root CA, OU=www.digicert.com, O=DigiCert Inc, C=US>
    <CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE>
    <OU=Equifax Secure Certificate Authority, O=Equifax, C=US>
    <OU=Starfield Class 2 Certification Authority, O="Starfield Technologies, Inc.", C=US>
    <CN=Equifax Secure eBusiness CA-1, O=Equifax Secure Inc., C=US>
    <CN=VeriSign Class 2 Public Primary Certification Authority - G3, OU="(c) 1999 VeriSign, Inc. - For authorized use only"
    , OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US>
    <CN=AAA Certificate Services, O=Comodo CA Limited, L=Salford, ST=Greater Manchester, C=GB>
    <OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 1 Public Primary Certificat
    ion Authority - G2, O="VeriSign, Inc.", C=US>
    <CN=DigiCert Assured ID Root CA, OU=www.digicert.com, O=DigiCert Inc, C=US>
    <OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 3 Public Primary Certificat
    ion Authority - G2, O="VeriSign, Inc.", C=US>
    <OU=Equifax Secure eBusiness CA-2, O=Equifax Secure, C=US>
    <CN=GlobalSign, O=GlobalSign, OU=GlobalSign Root CA - R2>
    <CN=Anuj-Shukla, OU=X, O=Y, L=Z, ST=XY, C=YZ>
    <CN=Entrust.net Secure Server Certification Authority, OU=(c) 2000 Entrust.net Limited, OU=www.entrust.net/SSL_CPS incor
    p. by ref. (limits liab.), O=Entrust.net>
    <OU=Secure Server Certification Authority, O="RSA Data Security, Inc.", C=US>
    <[email protected], CN=Thawte Personal Premium CA, OU=Certification Services Division, O=Thawte C
    onsulting, L=Cape Town, ST=Western Cape, C=ZA>
    <[email protected], CN=Thawte Personal Basic CA, OU=Certification Services Division, O=Thawte Consu
    lting, L=Cape Town, ST=Western Cape, C=ZA>
    <CN=Client, OU=X, O=Y, L=Z, ST=XY, C=YZ>
    <CN=GeoTrust Global CA, O=GeoTrust Inc., C=US>
    <OU=Class 1 Public Primary Certification Authority, O="VeriSign, Inc.", C=US>
    <CN=Sonera Class1 CA, O=Sonera, C=FI>
    <OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US>
    <CN=UTN-USERFirst-Hardware, OU=http://www.usertrust.com, O=The USERTRUST Network, L=Salt Lake City, ST=UT, C=US>
    <CN=UTN-USERFirst-Client Authentication and Email, OU=http://www.usertrust.com, O=The USERTRUST Network, L=Salt Lake Cit
    y, ST=UT, C=US>
    <CN=VeriSign Class 1 Public Primary Certification Authority - G3, OU="(c) 1999 VeriSign, Inc. - For authorized use only"
    , OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US>
    <CN=America Online Root Certification Authority 1, O=America Online Inc., C=US>
    <CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by
    ref. (limits liab.), O=Entrust.net>
    <CN=GTE CyberTrust Root 5, OU="GTE CyberTrust Solutions, Inc.", O=GTE Corporation, C=US>
    <CN=UTN-USERFirst-Object, OU=http://www.usertrust.com, O=The USERTRUST Network, L=Salt Lake City, ST=UT, C=US>
    <CN=UTN - DATACorp SGC, OU=http://www.usertrust.com, O=The USERTRUST Network, L=Salt Lake City, ST=UT, C=US>
    <CN=Sonera Class2 CA, O=Sonera, C=FI>
    <CN=TC TrustCenter Class 2 CA II, OU=TC TrustCenter Class 2 CA, O=TC TrustCenter GmbH, C=DE>
    *** ServerHelloDone
    *** Certificate chain
    *** ClientKeyExchange, RSA PreMasterSecret, TLSv1
    main, WRITE: TLSv1 Handshake, length = 141
    SESSION KEYGEN:
    PreMaster Secret:
    0000: 03 01 E5 87 BC 2A E8 70 60 BA DE FA BB 42 2D 1E .....*.p`....B-.
    0010: 3D 21 DB 52 A7 6C FC 55 9F 77 3A 97 B5 33 F7 33 =!.R.l.U.w:..3.3
    0020: 2A FD 65 5A 78 CE 1F F4 63 29 15 D1 48 4C 46 7A *.eZx...c)..HLFz
    CONNECTION KEYGEN:
    Client Nonce:
    0000: 48 5F 6E 85 32 07 FC F4 22 C0 36 BE A0 C5 A2 41 H_n.2...".6....A
    0010: 4E 03 78 B6 B3 C7 A0 D0 DF F7 29 D8 BC 8A E4 46 N.x.......)....F
    Server Nonce:
    0000: 48 5F 6E 80 62 59 1A 94 13 0F 2D 9B A3 C4 DC C1 H_n.bY....-.....
    0010: 96 7F 13 2C 82 A5 4E F3 9B 22 D6 7B C6 59 66 0F ...,..N.."...Yf.
    Master Secret:
    0000: 98 D5 9E C0 97 14 DB 9F 0E 3B 15 6B 1E F8 06 2C .........;.k...,
    0010: 27 99 A4 69 B8 E4 16 03 BD 89 B9 D0 CB C5 C9 DF '..i............
    0020: AE 4B 16 56 56 B2 02 F8 E0 71 1D D8 04 05 11 BF .K.VV....q......
    Client MAC write Secret:
    0000: 6F B7 22 74 D6 1E 44 16 C5 CB CE CE 8E 0F 46 E1 o."t..D.......F.
    Server MAC write Secret:
    0000: F8 DA 34 1A 53 55 E0 6D 50 25 3E 7F E5 69 91 51 ..4.SU.mP%>..i.Q
    Client write key:
    0000: F7 05 6E 10 62 0C AE 4A BC 96 E2 25 BA BC 46 BD ..n.b..J...%..F.
    Server write key:
    0000: E2 7D 11 FF 4A F3 C5 4F 94 9D 5C 57 71 5A 16 D1 ....J..O..\WqZ..
    ... no IV used for this cipher
    main, WRITE: TLSv1 Change Cipher Spec, length = 1
    *** Finished
    verify_data: { 216, 54, 180, 236, 72, 70, 181, 20, 31, 128, 165, 12 }
    main, WRITE: TLSv1 Handshake, length = 32
    main, waiting for close_notify or alert: state 1
    main, Exception while waiting for close java.net.SocketException: Software caused connection abort: recv failed
    main, handling exception: java.net.SocketException: Software caused connection abort: recv failed
    Jun 23, 2008 3:06:06 PM currenex.share.log.CxLogger log
    INFO: details=Exception occured while calling Login service in callLoginWebService
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.net.SocketException: Software caused connection abort: recv failed
    faultActor:
    faultNode:
    faultDetail:
    {http://xml.apache.org/axis/}stackTrace:java.net.SocketException: Software caused connection abort: recv failed
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.readFully(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.waitForClose(Unknown Source)
    at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.sendChangeCipherSpec(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.sendChangeCipherAndFinish(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverHelloDone(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)
    at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
    at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
    at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
    at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
    at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
    at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
    at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
    at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
    at org.apache.axis.client.Call.invoke(Call.java:2767)
    at org.apache.axis.client.Call.invoke(Call.java:2443)
    at org.apache.axis.client.Call.invoke(Call.java:2366)
    at org.apache.axis.client.Call.invoke(Call.java:1812)
    at currenex.webservice.share.definitions.AuthenticationBindingStub.login(AuthenticationBindingStub.java:362)
    at currenex.webservice.clients.util.WebserviceTestUtil.callLoginLogoutWebService(WebserviceTestUtil.java:132)
    at currenex.webservice.clients.util.TradeCreateTester.createWebLogin(TradeCreateTester.java:64)
    {http://xml.apache.org/axis/}hostname:anuj
    java.net.SocketException: Software caused connection abort: recv failed
    at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
    at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:154)
    at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
    at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
    at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
    at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
    at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
    at org.apache.axis.client.Call.invoke(Call.java:2767)
    at org.apache.axis.client.Call.invoke(Call.java:2443)
    at org.apache.axis.client.Call.invoke(Call.java:2366)
    at org.apache.axis.client.Call.invoke(Call.java:1812)
    at currenex.webservice.share.definitions.AuthenticationBindingStub.login(AuthenticationBindingStub.java:362)
    at currenex.webservice.clients.util.WebserviceTestUtil.callLoginLogoutWebService(WebserviceTestUtil.java:132)
    at currenex.webservice.clients.util.TradeCreateTester.createWebLogin(TradeCreateTester.java:64)
    Caused by: java.net.SocketException: Software caused connection abort: recv failed
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.readFully(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.waitForClose(Unknown Source)
    at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.sendChangeCipherSpec(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.sendChangeCipherAndFinish(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverHelloDone(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)
    at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
    at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
    at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
    ... 12 more
    Jun 23, 2008 3:06:06 PM currenex.share.log.CxLogger log
    INFO: details=Login response is null, login was not successful
    Login was unsuccessful
    *In apache's server.xml, My webservice is deployed as*
    <Connector className="org.apache.catalina.connector.http.HttpConnector"
         port="8443" minProcessors="5" maxProcessors="75" enableLookups="true"
         acceptCount="10" debug="0"
         protocol="HTTP/1.1" SSLEnabled="true" secure="true"
    maxThreads="150" scheme="https"
         keystoreFile="lib/server.keystore"
    keystorePass="changeit" clientAuth="true"
              >
              <Factory className="org.apache.catalina.net.SSLServerSocketFactory"
         protocol="TLS"/>
    </Connector>
    Please note clientAuth="true" parameter,
    when I set it to false, My test runs smoothly and no exception/issue is reported
    Not to forget, my javaclient has following lines too..
    //System.setProperty("javax.net.ssl.keyStore", "C:\\java\\jdk1.6.0_10\\jre\\lib\\security\\cacerts");
    //System.setProperty("javax.net.ssl.keyStorePassword", "changeit");
    //System.setProperty("javax.net.ssl.trustStore", "C:\\java\\jdk1.6.0_10\\jre\\lib\\security\\cacerts");
    //System.setProperty("java.protocol.handler.pkgs" , "com.sun.net.ssl.internal.www.protocol");
    System.setProperty("javax.net.ssl.trustStore","C:\\java\\jdk1.6.0_10\\bin\\client.keystore");
    System.setProperty("javax.net.ssl.trustStorePassword","changeit");
    //System.setProperty("com.sun.net.ssl.rsaPreMasterSecretFix" , "true");
    //System.setProperty("javax.net.ssl.keyStore", "C:\\java\\jdk1.6.0_10\\bin\\server.keystore");
    //System.setProperty("javax.net.ssl.keyStorePassword","changeit");
    System.setProperty("javax.net.debug", "ssl");
    s_log.info("after SSL change");
    I tried all possible combinbations of these properties but nothing worked...
    Please let me know if I am missing any required step.. here
    Ask me if you want to know more details about my problem.
    This is very urgent and critical.. Many thanks in advance.

    Hi ejp,
    thanks for your reply. I did read your post in other thread that you pointed.
    I had searched quite a lot on this issue and had idea that it might be due to firewall settings..
    but sadly, I don't know the solution. Well, you have seen the entire code that I wrote and exception too, Could you suggest me a way out? or any specific firewall setting or a workaround?
    Please let me know if you need any other info from my side regarding the code.
    Thanks a Ton!
    Anuj

  • WLC with LAG mode enable connected to a switch HP in LACP mode

    I am trying to connect a WLC 4402 5.0.148.0 mode with an HP 2800 switch. The switch is configured thunk mode with LACP protocol.
    The WLC in LAG mode uses the protocol LACP? How can configure them switch HP?
    Thanks.
    Mirko Severi.

    not supported, Mirko. Refer to this for further detail:
    http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40mint.html#wp1186245

  • ARD Cannot See Client with Stealth Mode Enabled

    Hello,
    I have a client with OS X v10.4.11, and security update 2007-009 is not installed. If I Enable Stealth Mode (firewall) on this client, it no longer appears in the ARD list, even though ARD is enabled on the client and the ARD users have been granted access. Has anyone seen this before? If so, is there a solution other than disabling stealth mode for the firewall?
    Thanks for reading!

    Depending on your network layout, it could indeed be blocked ports. ARD depends on ports 3283 for most functions and 5900 for observe and control. So if the lab is on a different subnet from your administrator workstation, have your network admin confirm that both of those ports are open in the router.
    Hope this helps.

  • Cannot send iBot with LDAP gp enabled

    I have problem runing iBot for some of my users when I enable LDAP for group. This only happen for some users. I works fine when authentication is at user level (no init block for group)
    This is the select statement for the group init block
    select groupname,webgroups from ldap_gp where
    username=':USER'
    iBot error logged
    [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW).
    Error Codes: OPR4ONWY:U9IM8TAC
    State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
    [nQSError: 13024] Successful completion of init block 'LDAP_Group' is required. (08004)

    Same error in AIX server. We are using the default pw for the Administrator, can you help us?

  • 1131 LWAP not join WLC 4402

    I am deploying WLC 4402 with LWAP 1131 but AP fail to join the WLC .The resone that I dont have DNS server.The error message in the AP is :
    AP001d.451f.8582>
    *Mar 1 00:00:38.005: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
    HCP address 172.26.5.12, mask 255.255.255.0, hostname AP001d.451f.8582
    Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
    *Mar 1 00:00:49.371: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve
    I tried to configure the Controller address in LAP but I fail ,The error when I tried to configure AP is below:
    AP001d.451f.8582#lwapp ap controller ip address 172.26.5.10
    ERROR!!! Command is disabled.
    my question is :
    is it possible to make LAP join WLC with out DNS,if yes how ?

    Hi Yhab,
    There are other ways besides DNS to help in the AP and WLC Discovery process. Have a look in this good doc;
    Lightweight AP (LAP) Registration to a Wireless LAN Controller (WLC)
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml#topic2
    For the Static entry problem;
    If this AP was ever registered you can use this command from the LAP CLI to clear the LWAPP configuration on the LAP:
    clear lwapp private-config
    This allows you to use the AP LWAPP static configuration commands again.
    Here is an example:
    Enable (enter password)
    AP1240#clear lwapp private-config
    AP1240#lwapp ap hostname AP1240
    AP1240#lwapp ap ip address 10.77.244.199 255.255.255.224
    AP1240#lwapp ap ip default-gateway 10.77.244.220
    AP1240#lwapp ap controller ip address 172.16.1.50
    Note: You cannot use the clear lwapp private-config command when the LAP is registered with the controller.
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a00808e2d27.shtml#t2
    Hope this helps!
    Rob

  • Can we join table with structure

    Hi
    i have taken fields from Plaf table and some fields from structures so now i want to join that how can i join.
    Is there any option?
    regards

    Hi,
    structure dont have any data base table associated with them so they dont have any data.
    that's why we cannot join structure witha table but we can include a structure within any table.
    Sytex to include structure in ztable:
    fieldname     data element.
    .include        struname
    hope it will ans ur query.
    Thanks
    Rajesh Kumar

  • Issue with AP Auth List

    Hi guys,
    I'm havin problems joining an AP (3602I) to my controller (5508) when authorising MIC's against against my auth-list on the controller.
    I have added the AP MAC address to the auth-list but the AP won't successfully join. The controller occasionally says "joined" and I can view it in the AP list, but the AP status is always UNKNOWN, whereby I will reset the AP and try again.
    Any ideas?
    Thanks.

    show inv:
    Burned-in MAC Address............................ E8:B7:48:A1:CD:A0
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 100
    NAME: "Chassis"    , DESCR: "Cisco 5500 Series Wireless LAN Controller"
    PID: AIR-CT5508-K9,  VID: V01,  SN: xxxxxxxxxx
    AP sh ver:
    AP78da.6e42.85ca#sh ver
    Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Tue 30-Jul-13 22:57 by prod_rel_team
    ROM: Bootstrap program is C3600 boot loader
    BOOTLDR: C3600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(23c)JY, RELEASE SOFTWARE (fc1)
    AP78da.6e42.85ca uptime is 22 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP3602I-E-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
    Processor board ID FCZ1749J1KS
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.5.102.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 78:DA:6E:42:85:CA
    Part Number                          : 73-14521-02
    PCA Assembly Number                  : 800-37501-02
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC17444F2D
    Top Assembly Part Number             : 800-35852-02
    Top Assembly Serial Number           : FCZ1749J1KS
    Top Revision Number                  : C0
    Product/Model Number                 : AIR-CAP3602I-E-K9
    Configuration register is 0x
    WLC software version: 7.5.102.0
    FUS: 7.0.112.21
    Thanks again Scott.

  • AIR-CAP1602i cannot join a WLC 5508 controller

    Hello,
    I'm managing a large number of access points on a Cisco wlc 5508 controller.
    We've recently purchased a bunch of new AIR-CAP1602I-E-K9.
    note that we already have AIR-CAP1602I-E-K9 and other models in production.
    These A.P are not able to join the controller for some reason, I've tried a lot of different things but I am now at a loss.
    I have checked the regulatory domain, upgraded the FUS, manually upgraded the software version of the LAP to match the version on the other A.P.
    I even downgraded/upgraded the WLC code (version 7.4.x and 8.0)
    I use the dhcp option 43 to to send the controller IP.
    Here are the info that can help:
    errors:
    #on A.P
    *Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    #on WLC
    Lwapp join request rejected (WLC version 7.6.130.0)
    Failed to add database entry (WLC version 8.0)
    WLC sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.130.0
    Bootloader Version............................... 1.0.20
    Field Recovery Image Version..................... 7.6.101.1
    Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
    Build Type....................................... DATA + WPS
    System Name...................................... XXX
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    Redundancy Mode.................................. Disabled
    IP Address....................................... XXX
    Last Reset....................................... Software reset
    System Up Time................................... 6 days 4 hrs 16 mins 27 secs
    System Timezone Location.........................
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... Multiple Countries:CA,FR
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +41 C
    External Temperature............................. +22 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 7
    Number of Active Clients......................... 1977
    Burned-in MAC Address............................ A4:93:4C:B0:E4:C0
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 250
    AP sh version
    AP58f3.9cb8.3701#sh version
    Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.2(4)JB6, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Fri 22-Aug-14 10:56 by prod_rel_team
    ROM: Bootstrap program is C1600 boot loader
    BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)
    AP58f3.9cb8.3701 uptime is 31 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap1g2-k9w8-mx.152-4.JB6/ap1g2-k9w8-mx.152-4.JB6"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP1602I-E-K9 (PowerPC) processor (revision B0) with 229366K/32768K bytes of memory.
    Processor board ID FGL1832X5QU
    PowerPC CPU at 533MHz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.6.100.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 58:F3:9C:B8:37:01
    Part Number                          : 73-14671-04
    PCA Assembly Number                  : 000-00000-00
    PCA Revision Number                  :
    PCB Serial Number                    : FOC183171L4
    Top Assembly Part Number             : 800-38552-01
    Top Assembly Serial Number           : FGL1832X5QU
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-CAP1602I-E-K9
    AP sh inventory
    NAME: "AP1600", DESCR: "Cisco Aironet 1600 Series (IEEE 802.11n) Access Point"
    PID: AIR-CAP1602I-E-K9 , VID: V01, SN: FGL1832X5QU
    Thanks for your help !

    Hi Olivier,
    The error messages that you have on the debugs:
    *Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    It is related to the bug: CSCuh46442
    https://tools.cisco.com/bugsearch/bug/CSCuh46442/?referring_site=ss
    This bug is resolved in version : 8.0.100.0
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80.html#pgfId-1163951
    Can you please paste here "show ap auth-list" from the controller CLI?
    I suggest to enable MIC if it is not enabled, and then check if the AP's will join or not.
    Kind Regards
    Mohammad Setan

  • OEAP-600 AP backup connectivity to WLC

    Hi all,
    Here's the list of equipments:
    Pool of oeap 600 aps
    1x 2504WLC as OEAP WLC (@DMZ)
    1x ASA 5515
    Scenario:
    My OEAP WLC located at ASA - DMZ is NATted to a public ip (primary internet ISP), then my pool of OEAP-600 were configured to communicate with this OEAP WLC.
    My question is:
    I want to automate the failover of OEAP-600 (I don't know if this is possible) to the secondary internet ISP whenever the primary internet ISP fails. The secondary ISP is terminated on the same ASA 5515-X doing PBR and IP SLA stuff.
    I know that OEAP 600 can only be pointed to one WLC ip address
    I know that the WLC can only be NATted to one public IP address.
    Anyone?
    What would be the best solution to perform the OEAP backup connectivity? Or just buy another set of WLC/ASA then just manually configure the OEAP-600 APs to point to the secondary ISP.
    Dave

    You are limited to one public IP address on the WLC. You can have multiple WLC IP address set on the OEAP, but that will not help with one WLC and one public IP. So you would need another WLC and ASA since you would have two ISP connections with different public facing IP.
    Sent from Cisco Technical Support iPhone App

  • Why LAP1131AG and LAP11412 cannot to join WLC 2504?

    I have WLC 2504, Cisco LAP1131AG and then Cisco LAP1142N. Why LAP1131AG and LAP11412 cannot to join WLC 2504?
    this is error code at the Cisco LAP1131AG
    *Sep 12 19:30:27.730: %CAPWAP-3-ERRORLOG: Go join a capwap controller 
    *Sep 12 19:30:27.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.100.10 peer_port: 5246
    *Sep 12 19:30:57.001: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
    *Sep 12 19:31:27.000: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.100.10:5246
    *Sep 12 19:31:32.083: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Sep 12 19:31:32.083: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Sep 12 19:31:32.085: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Sep 12 19:31:32.117: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !! 
    *Sep 12 19:31:32.118: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Sep 12 19:31:33.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Sep 12 19:31:33.112: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Sep 12 19:31:33.117: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Sep 12 19:31:34.104: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Sep 12 19:31:34.111: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Sep 12 19:31:34.142: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Sep 12 19:31:34.147: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Sep 12 19:31:34.152: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Sep 12 19:31:35.141: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Sep 12 19:31:35.146: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Sep 12 19:31:35.170: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Sep 12 19:31:36.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    this is version LAP1131AG
    AP0018.18fc.fd58#sh version 
    Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(25e)JAO6, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Fri 22-Aug-14 10:07 by prod_rel_team
    ROM: Bootstrap program is C1130 boot loader
    BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
    AP0018.18fc.fd58 uptime is 9 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1130-k9w8-mx.124-25e.JAO6/c1130-k9w8-mx.124-25e.JAO6"
    and then this is version WLC2504
    (Cisco Controller) >show sysinfo 
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.130.0
    Bootloader Version............................... 1.0.20
    Field Recovery Image Version..................... 7.6.101.1
    Firmware Version................................. PIC 16.0
    Build Type....................................... DATA + WPS
    System Name...................................... Cisco_47:19:c4
    System Location.................................. 
    System Contact................................... 
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
    IP Address....................................... 192.168.100.10
    Last Reset....................................... Software reset
    System Up Time................................... 0 days 0 hrs 36 mins 45 secs
    System Timezone Location......................... 
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    --More-- or (q)uit
    Configured Country............................... ID  - Indonesia
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +34 C
    External Temperature............................. +40 C
    Fan Status....................................... 4100 rpm
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 1
    Number of Active Clients......................... 0
    Burned-in MAC Address............................ 24:E9:B3:47:19:C0
    Maximum number of APs supported.................. 5
    IP Address management WLC : 192.168.100.10/24
    IP Address LAP1142N :192.168.100.102/24
    IP Address LAP1131AG : 192.168.100.101/24
    Can anyone help my problem?

    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected]
    cisco AIR-LAP1142N-A-K9 (PowerPC405ex) processor (revision A0) with 90102K/40960K bytes of memory.
    Processor board ID FGL1439S15W
    PowerPC405ex CPU at 586MHz, revision number 0x147E
    Last reset from reload
    LWAPP image version 7.6.130.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: C8:4C:75:79:EB:E9
    Part Number                          : 73-12836-03
    PCA Assembly Number                  : 800-33767-03
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC14234D8Z
    Top Assembly Part Number             : 800-33775-02
    Top Assembly Serial Number           : FGL1439S15W
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1142N-A-K9  
    cisco AIR-LAP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
    Processor board ID FTX1026T46E
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on
    LWAPP image version 7.6.130.0
    1 FastEthernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:18:18:FC:FD:58
    Part Number                          : 73-8962-09
    PCA Assembly Number                  : 800-24818-08
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC102513DE
    Top Assembly Part Number             : 800-25544-06
    Top Assembly Serial Number           : FTX1026T46E
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1131AG-A-K9  
    Configuration register is 0xF

Maybe you are looking for

  • Unzip char conversion problems

    Hi everyone. I've got a zipped .txt that i unzip ussing PayloadZipBean module. It works fine but my problem is that i get some rare characters. Instead of á or ó or ì, i get a ? or # and so long. Does anybody know how to keep 'original' characters? R

  • Gnome 3.2 power management

    Hi everyone! I installed gnome 3.2 from unstable, and I notice that now my power management is worst than ever. The problem is that my graphics card, nvidia nvs 3100m, has some problems with DPMS. I can set the screen off with dpms, It works, but mou

  • I was told that there was a option for a delete button. Where?

    My songs keep deleting, however I was told that there was a option for a delete button. Where is it?

  • Using TAG Attributes within JSF Tags

    I'm using some .tag files for templating purposes. I'm using two tag attributes via <@% attribute %> directive. How can i access this attribute to do something like follows. <%@ tag display-name="Area de Trabajo" language="java" %> <%@ taglib prefix=

  • On elements 11 organizer how do you display file #

    On elements 11 organizer how do you display file # for each photo?