OEL 4.8
Hi friendz,
I am at edelivery.oracle.com now to download OEL4.8
But I found 2 choices:
Oracle Linux Release 4 Update 8 for x86 (32 Bit) - DVD V16749-01 2.2G
Oracle Linux Release 4 Update 8 for x86 source (32 Bit) - DVD V16757-01 2.4GWhich one should I choose?
Thanks a lot
Hi;
1. Install OEL4.8 in a new server.Okey
2. Clone EBS 11i from RHEL4.6 to the new server(OEL4.8).Okey
3. Upgrade database from 9.2.0.8 to 11gR2Good
4. Upgrade OEL4.8 to OEL5.6I have doubt here, why you dont install directly OEL5.6 and follow 1,2,3 steps on this version?
Please check:
RHEL3 to RHEL5
How to migrate from RHEL3 to RHEL5 (11i on 10.2.0,4)
RHEL4 to RHEL5 upgrade
Re: Upgraded OS ans what are all steps to change in instance
Regard
Helios
Similar Messages
-
Problem with Fresh Install of OEL 6.3 x86_64 over old OEL 6.0 x32
Dear Experts,
After selecting packages for fresh installation of OEL 6.3 x86_64 over old OEL 6.0 32-bit, it gives me the following warning
Some of the packages you have selected for install are missing dependencies. You can exit the installation, go back and change your package selections, or continue installing these packages without their dependencies.
Details
lvm2-2.02.83-3.el6.i686 requires lvm2-libs = 2.02.83-3.el6
kernel-uek-2,6,39-200.24.1.el6uek.x86_64 requires kernel-uek-firmware = 2.6.39-200.24.1.el6uek
lvm2-3.02.72-8.el6.i686 requires lvm2-libs = 2.03.72-8.el6
gdb conflicts with elfutilsHow to avoid this warning?
Best Regards
MahmoudHi Dude,
Thank you for your response.
I didn't choose upgrade. I chose Fresh Installation.
Sorry for not giving background about the problem
The OEL 6.0 x32 was installed on a server with 64bit architecture, so the power of the server is not utilized well.
I want to completely replace the OEL 6.0 (32 bit) system with OEL 6.3 (64 bit)
Just I choose the mount point of /root and /boot and leave the all partitions with no formatting to save the old data
The above warning in the first post appears. How to avoid it?
Regards
Mahmoud -
Page can not be Displayed in EBS R12 64bit - OEL 5.4 64bit
Hi Hussein,
I have just installed EBS R12 (12.0.4) 64 bit on OEL 5.4 64bit, for our new client.
The installation was successfull in general, but as usual I hit with this "Page Can Not Be Displayed" error and the client side ie browser.
I can startup and shutdown the DbTier with status "0".
I can startup and shutdown the AppsTier with status "0" (well it shows this overall status at the end, but I see some error with "OHS")
This the sample log of the AppsTier:
[applprod1@rdbms2 ~]$ ./startAPP
You are running adstrtal.sh version 120.13.12000000.3
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.4.12000000.3
Starting Oracle Process Manager (OPMN) ...
opmnctl: opmn started.
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/app l/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.6.12000000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rdbms2.ficsd.com:6200
0 of 1 processes started.
ias-instance id=VIS_rdbms2.rdbms2.ficsd.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=399901443,pid=2395)
failed to start a managed process after the maximum retry limit
Log:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/ora/10.1.3/opmn/HTTP_Server~1
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl /admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.11.12000000.2
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 0
adoacorectl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/a ppl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.12.12000000.3
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 0
adformsctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/ap pl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.6.12000000.2
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 0
adoafmctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_VIS.
adalnctl.sh: exiting with status 0
adalnctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.14
Starting concurrent manager for VIS ...
Starting VIS_1001@VIS Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u02/applprod1/VIS/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for VIS on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
adstrtal.sh: Exiting with status 0
adstrtal.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adstrtal.log for more information ...As you can see, the last had overall status code "0"
But there is this error:
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rdbms2.ficsd.com:6200
0 of 1 processes started.
ias-instance id=VIS_rdbms2.rdbms2.ficsd.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=399901443,pid=2395)
failed to start a managed process after the maximum retry limit
Log:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/ora/10.1.3/opmn/HTTP_Server~1
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adapcctl.txt for more information ...
But it says status 0 too, does this cause the "web page can not be displayed"?
Please Help........................
Thanks a lot in advanceDid you remove the lock files as suggested before?Not yet, I am not at the client right now, I will go there tomorrow morning. I am just practising here in our office test instance :)
The access log file has:
127.0.0.1 - - [01/Oct/2009:21:57:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:57:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:58:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:58:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:58:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:59:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:59:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:59:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:00:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:00:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:00:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:01:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"And the error log file:
[Thu Oct 1 08:42:44 2009] [notice] Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Oct 1 08:42:44 2009] [notice] Accept mutex: fcntl (Default: fcntl)
[Thu Oct 1 08:50:51 2009] [warn] [client 192.168.1.170] oc4j_socket_recvfull timed out
[Thu Oct 1 08:50:51 2009] [error] [client 192.168.1.170] [ecid: 1254357949:192.168.1.170:24084:0:3,0] mod_oc4j: request to OC4J rel12.ebiztech.biz:21500 failed: Connect failed
[Thu Oct 1 09:28:40 2009] [notice] Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Oct 1 09:28:40 2009] [notice] Accept mutex: fcntl (Default: fcntl)
[Thu Oct 1 09:29:58 2009] [error] [client 192.168.1.100] [ecid: 1254360598:192.168.1.170:27679:0:2,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:51:22 2009] [error] [client 192.168.1.101] [ecid: 1254361882:192.168.1.170:27679:0:11,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:51:26 2009] [error] [client 192.168.1.101] [ecid: 1254361886:192.168.1.170:28180:0:13,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:51:43 2009] [error] [client 192.168.1.101] [ecid: 1254361903:192.168.1.170:28256:0:17,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:52:55 2009] [error] [client 192.168.1.101] [ecid: 1254361975:192.168.1.170:27678:0:17,0] Directory index forbidden by rule: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/
[Thu Oct 1 11:40:43 2009] [error] [client 192.168.1.101] [ecid: 1254368443:192.168.1.170:28256:0:53,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 12:08:25 2009] [error] [client 192.168.1.101] [ecid: 1254370105:192.168.1.170:28256:0:66,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 12:08:28 2009] [error] [client 192.168.1.101] [ecid: 1254370108:192.168.1.170:27677:0:59,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 13:05:48 2009] [error] [client 192.168.1.101] [ecid: 1254373548:192.168.1.170:28179:0:127,0] Directory index forbidden by rule: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/
[Thu Oct 1 13:06:56 2009] [error] [client 192.168.1.101] [ecid: 1254373616:192.168.1.170:28178:0:226,0] Directory index forbidden by rule: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/
[Thu Oct 1 13:06:56 2009] [error] [client 192.168.1.101] [ecid: 1254373616:192.168.1.170:28178:0:227,0] File does not exist: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
[Thu Oct 1 13:06:56 2009] [error] [client 192.168.1.101] [ecid: 1254373616:192.168.1.170:28178:0:228,0] File does not exist: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gifThe above error normal? Its just my test instance and the users seem have no problem? or I am just not aware of.
Thanks -
Weird siebel 8.0 console mode installation problem on OEL 4
Hi There,
When I tried to install Siebel 8.0 SIA build on Oracle Enterprise Linux (OEL 4), I encountered a weird problem. It is a sandbox for QA to do testing, everything is on the same machine: oracle database 10.2.0.3, gateway, siebel server and SWSE. I installed oracle database, and make sure the database connection is fine, then I did the following :
1) run install by command "./setuplinux -is:javaconsole -console", it compeleted fine.
2) go to gateway directory, source cfgenv.sh
3) run "ssincfgw -is:javaconsole -console" to do gateway server, enterprise and SWSE logical profile configuration. Gateway configuration is fine, gateway started up successfully. But during enterprise configuration, it throws out a bunch of error messages like :
Error creating Parameter:MaxEntrTasks for Comp:TxnProc in CompGroup:Remote
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:MaxEntrTasks for Comp:RepAgent in CompGroup:Remote
Strict Flag set to FALSE, continuing with the next Object...
Error creating Component:MsgBroadcastMgr in CompGroup:CommMgmt
Strict Flag set to FALSE, continuing with the next Object...
SBL-ADM-02071: Enterprise server siebel not found in gateway server
But at the end, it still shows "Execution Successful!"
The SWSE logical profile configuration went through fine
4) go to siebel server directory and source cfgenv.sh
5) launch the ssincfgw in siebsrvr/bin directory to config siebel server, it also throws a bunch of error messages like:
Error creating Parameter:AllowAnonUsers for Comp:SMObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:AllowAnonUsers for Comp:eMarketObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:AllowAnonUsers for Comp:eEventsObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
But again, at the end it still shows "Execution Successful!".
6) go to siebsrvr directory, source siebenv.sh
7) Launch srvrmgr in command line mode:
srvrmgr /g $GATEWAY /e $SIEBEL_ENTERPRISE /u $USERNAME /p $PASSWD
and it shows "connected to 0 server"
In the SiebSrvr.log file, it shows " SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used."
In the sw_cfg_util.log file, it shows "SBL-SVR-03005: No server connect string for Siebel Component servermgr in Siebel Enterprise siebel, Siebel Server sdc60002sems".
The weirdest part is, if I clean up and uninstall everything, run the install and configure in GUI mode, give the same parameters, I don't get any error messages and siebel server can be up and running fine.
I searched the forum and found people have reported the same error message during enterprise configuration, but says it does not affect them from bring up the siebel server. Since I'm developing an automation to do the installation, I cannot use GUI mode to install. I have to make the command line console mode work and then record the response file for silent install. Does anyone know what might cause my siebel server fail to be up and running ? Thanks a lot for any suggestions and helps.hi,
Make sure that your network uses DNS naming.
This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
regards,
saravanan -
Hello buddy:
How can I set up DNS on OEL ? Just for install 11g R2 RACYou can use "system-config-network" command to configure your DNS configuration.
-
Telnet session not working in OEL -5
Telnet session not working in OEL -5
==============================
1. Installed xinetd and telnet-server packages on the box.
2. Enabled the xinetd service.
# service xinetd start
# chkconfig xinetd on
Telnet still not working. Please help.
Lily.Re-ran the /etc/init.d/xinetd restart command. Telnet cannot connect and this is what I get:
Unencrypted connection refused. Goodbye.
Below is the telnet.cfg
==================
# default: on
# description: The telnet server serves telnet sessions; it uses \
# unencrypted username/password pairs for authentication.
service telnet
flags = REUSE
socket_type = stream
wait = no
user = root
server = /usr/sbin/in.telnetd
log_on_failure += USERID
disable = no
=================== -
How do I find the number of physical CPUs , number of cores in OEL ?
In RHEL , it is easy to find the number of Physical CPUs and the number of cores within each CPU
-- Ouput from Red Hat Enterprise Linux 5.4
-- This a real machine. Not a VM
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 46
model name : Intel(R) Xeon(R) CPU X7550 @ 2.00GHz
stepping : 6
cpu MHz : 1995.048
cache size : 18432 KB
physical id : 0 --------------> This will give info on the physical CPU
siblings : 8
core id : 0
cpu cores : 8 --------------> This will give the number of cores within a CPU
apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm
bogomips : 3990.09
clflush size : 64
cache_alignment : 64
address sizes : 44 bits physical, 48 bits virtual
power management: [8]Output from Oracle Linux . Physical CPU Id and Number of Cores info is missing.
-- Output from Oracle Enterprise Linux 6.3
-- This is a virtual machine created using Virtual Box
-- Processor ID , number of cores is missing
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
stepping : 7
cpu MHz : 2298.627
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp lm constant_tsc up rep_good nopl pni monitor ssse3 lahf_lm
bogomips : 4597.25
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:Is this the expected output in Oracle Enterprise Linux ? If so, how can I find the number of Physical CPUs and the number of cores within a Physical CPU in OEL?
Is this info missing because I am running OEL in a virtual machine ?Oracle Linux behaves exactly like Red Hat in this matter an /proc/cpuinfo can be used for that. I guess this is because you have set up VirtualBox to only assign one virtual CPU to your guest Linux.
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 33
model name : Dual Core AMD Opteron(tm) Processor 275
stepping : 2
cpu MHz : 1000.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good extd_apicid pni lahf_lm cmp_legacy
bogomips : 1994.47
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttpAnother example is this one, OEL 5.6 inside of VirtualBox but with 2 virtual CPUs assigned:
[root@oel56proxy ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
stepping : 10
cpu MHz : 2064.652
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
bogomips : 4129.30
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
stepping : 10
cpu MHz : 2064.652
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
bogomips : 7494.15I have not tried to replicate this with a VM that only has one vCPU assigned but I guess that is why you only see one CPU and no processor_id and so on.
Bjoern -
Root.sh script hangs while starting ohasd on OEL
Hi
I have installed 11g Oracle grid infrastructure on OEL R5 U6
I am having an issue when it comes to running the root.sh script
The script runs fine until it gets to the part where it tries to start ohasd
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started
ohasd is startingOnce it reaches this point it hangs. It's been at this part of the root.sh script now for over an hour. I cannot move the mouse or create new ssh sessions. It has completely hung the machine.
I have ensured that that hosts file has no entries for the host name
And there does not seem to be any errors in the logs
Any Ideas on where I can start looking to fix this issue?
Thanks
G.
Edited by: Grahambo on Aug 18, 2011 9:35 AM
Edited by: Grahambo on Aug 18, 2011 9:35 AMHere is the last entries in the Log:
/oracle/app/11.2.0/grid/log/server004n0/ohasd/ohasd.log
2011-08-18 17:02:28.116: [ CRSOCR][1916807488] Multi Write Batch processing...
2011-08-18 17:02:28.404: [UiServer][1929414976] Container [ Name: ORDER
MESSAGE:
TextMessage[CRS-2676: Start of 'ora.diskmon' on 'server004n0' succeeded]
MSGTYPE:
TextMessage[3]
OBJID:
TextMessage[ora.cssd]
WAIT:
TextMessage[0]
2011-08-18 17:02:35.986: [ CRSOCR][1916807488] Multi Write Batch done.
2011-08-18 17:02:44.397: [ CRSCCL][1870641472]Obtained GPnP Profile.
2011-08-18 17:02:44.699: [ CRSCCL][1870641472]USING CLSC ============
2011-08-18 17:02:52.779: [ default][1870641472]clsu_get_private_ip_addr: Calling clsu_get_private_ip_addresses to get first private ip
2011-08-18 17:02:52.779: [ default][1870641472]Check namebufs
2011-08-18 17:02:52.780: [ default][1870641472]Finished checking namebufs
2011-08-18 17:02:52.782: [ GPnP][1870641472]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2011-08-18 17:02:52.782: [ GPnP][1870641472]clsgpnp_Init: [at clsgpnp0.c:534] '/oracle/app/11.2.0/grid' in effect as GPnP home base.
2011-08-18 17:02:54.744: [ GPnP][1870641472]clsgpnp_InitCKProviders: [at clsgpnp0.c:3866] Init gpnp local security key providers (2) fatal if both fail
2011-08-18 17:02:54.744: [ GPnP][1870641472]clsgpnp_InitCKProviders: [at clsgpnp0.c:3869] Init gpnp local security key proveders 1 of 2: file wallet (LSKP-FSW)
2011-08-18 17:02:54.744: [ GPnP][1870641472]clsgpnpkwf_initwfloc: [at clsgpnpkwf.c:398] Using FS Wallet Location : /oracle/app/11.2.0/grid/gpnp/server004n0/wallets/peer/
2011-08-18 17:02:54.744: [ GPnP][1870641472]clsgpnp_InitCKProviders: [at clsgpnp0.c:3891] Init gpnp local security key provider 1 of 2: file wallet (LSKP-FSW) OK
2011-08-18 17:02:54.744: [ GPnP][1870641472]clsgpnp_InitCKProviders: [at clsgpnp0.c:3897] Init gpnp local security key proveders 2 of 2: OLR wallet (LSKP-CLSW-OLR)
[ CLWAL][1870641472]clsw_Initialize: OLR initlevel [70000]
2011-08-18 17:02:54.745: [ GPnP][1870641472]clsgpnp_InitCKProviders: [at clsgpnp0.c:3919] Init gpnp local security key provider 2 of 2: OLR wallet (LSKP-CLSW-OLR) OK
2011-08-18 17:02:54.745: [ GPnP][1870641472]clsgpnp_getCK: [at clsgpnp0.c:1950] <Get gpnp security keys (wallet) for id:1,typ;7. (2 providers - fatal if all fail)
2011-08-18 17:02:54.745: [ GPnP][1870641472]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:498] req_id=1 ck_prov_id=1 wallet path: /oracle/app/11.2.0/grid/gpnp/server004n0/wallets/peer/
2011-08-18 17:02:54.758: [ GPnP][1870641472]clsgpnpwu_walletfopen: [at clsgpnpwu.c:494] Opened SSO wallet: '/oracle/app/11.2.0/grid/gpnp/server004n0/wallets/peer/cwallet.sso'
2011-08-18 17:02:54.758: [ GPnP][1870641472]clsgpnp_getCK: [at clsgpnp0.c:1965] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1 of 2 (LSKP-FSW(1))
2011-08-18 17:02:54.758: [ GPnP][1870641472]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2011-08-18 17:02:54.763: [ GPnP][1870641472]clsgpnp_getCK: [at clsgpnp0.c:1950] <Get gpnp security keys (wallet) for id:1,typ;4. (2 providers - fatal if all fail)
2011-08-18 17:02:54.763: [ GPnP][1870641472]clsgpnpkwf_getWalletPath: [at clsgpnpkwf.c:498] req_id=1 ck_prov_id=1 wallet path: /oracle/app/11.2.0/grid/gpnp/server004n0/wallets/peer/
2011-08-18 17:02:54.771: [ GPnP][1870641472]clsgpnpwu_walletfopen: [at clsgpnpwu.c:494] Opened SSO wallet: '/oracle/app/11.2.0/grid/gpnp/server004n0/wallets/peer/cwallet.sso'
2011-08-18 17:02:54.771: [ GPnP][1870641472]clsgpnp_getCK: [at clsgpnp0.c:1965] Result: (0) CLSGPNP_OK. Get gpnp wallet - provider 1 of 2 (LSKP-FSW(1))
2011-08-18 17:02:54.771: [ GPnP][1870641472]clsgpnp_getCK: [at clsgpnp0.c:1982] Got gpnp security keys (wallet).>
2011-08-18 17:02:54.771: [ GPnP][1870641472]clsgpnp_Init: [at clsgpnp0.c:837] GPnP client pid=18394, tl=3, f=3Edited by: Grahambo on 18-Aug-2011 12:08 -
Oracle RAC 11.2.0.3 installation on OEL 6.3 HAIP error
Hi friends
i have these big problem, i tried to install RAC on these two virtual machines before i do the production enviroment and here are the problems i am facing
=========================
Operating system OEL 6.3
GRID 11.2.0.3
DB 11.2.0.3
===========================
1. during pre requset test /etc/resolv.vonf failed saying PRVF-5636 : The DNS response time for an unreachable node can not be found . . .. but i cheked everything
[root@ubsrac1 /]# nslookup ubsrac1
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac1.kifiya.com
Address: 192.168.0.117
[root@ubsrac1 /]# nslookup ubsrac1-vip
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac1-vip.kifiya.com
Address: 192.168.0.119
[root@ubsrac1 /]# nslookup ubsrac2
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac2.kifiya.com
Address: 192.168.0.118
[root@ubsrac1 /]# nslookup ubsrac2-vip
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac2-vip.kifiya.com
Address: 192.168.0.120
[root@ubsrac1 /]# nslookup ubsrac-scan
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac-scan.kifiya.com
Address: 192.168.0.139
Name: ubsrac-scan.kifiya.com
Address: 192.168.0.136
Name: ubsrac-scan.kifiya.com
Address: 192.168.0.138
====================================
And for unknow host here is the output
[root@ubsrac1 /]# time nslookup unknown-not-reachable-node
Server: 192.168.0.100
Address: 192.168.0.100#53
** server can't find unknown-not-reachable-node: SERVFAIL
real 0m0.019s
user 0m0.003s
sys 0m0.008s
[root@ubsrac1 /]#
=====================================
Everything is ok on both the nodes........... but still i get the PRVF-5636 : The DNS response time
==========================
output of /etc/hosts
[root@ubsrac1 /]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
#Network configuration for ubsrac1
192.168.0.117 ubsrac1 ubsrac1.kifiya.com
192.168.0.119 ubsrac1-vip ubsrac1-vip.kifiya.com
172.16.1.17 ubsrac1-priv ubsrac1-priv.kifiya.com
#Network configuration for ubsrac2
192.168.0.118 ubsrac2 ubsrac2.kifiya.com
192.168.0.120 ubsrac2-vip ubsrac2-vip.kifiya.com
172.16.1.18 ubsrac2-priv ubsrac2-priv.kifiya.com
=============================================
and i ignored and went with installation and excuted root.sh on the first node and here is the last output where i get the HAIP error
Adding Clusterware entries to upstart
CRS-2672: Attempting to start 'ora.mdnsd' on 'ubsrac1'
CRS-2676: Start of 'ora.mdnsd' on 'ubsrac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'ubsrac1'
CRS-2676: Start of 'ora.gpnpd' on 'ubsrac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'ubsrac1'
CRS-2672: Attempting to start 'ora.gipcd' on 'ubsrac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'ubsrac1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'ubsrac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'ubsrac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'ubsrac1'
CRS-2676: Start of 'ora.diskmon' on 'ubsrac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'ubsrac1' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk a745c85386eb4f4fbfa0f3b25c48a1e9.
Successful addition of voting disk 146d859894f64f0cbf8172ecabd0e40a.
Successful addition of voting disk 7c41353b913b4f6dbf1b5c56f9661e28.
Successful addition of voting disk 5364b3e4d2f14fe9bf69207f38af44c5.
Successful addition of voting disk 6376684a593a4fd1bf50e89459820d8c.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE a745c85386eb4f4fbfa0f3b25c48a1e9 (ORCL:CRSVOL1) [DATA]
2. ONLINE 146d859894f64f0cbf8172ecabd0e40a (ORCL:CRSVOL2) [DATA]
3. ONLINE 7c41353b913b4f6dbf1b5c56f9661e28 (ORCL:CRSVOL3) [DATA]
4. ONLINE 5364b3e4d2f14fe9bf69207f38af44c5 (ORCL:CRSVOL4) [DATA]
5. ONLINE 6376684a593a4fd1bf50e89459820d8c (ORCL:CRSVOL5) [DATA]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'ubsrac1'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted. For details refer to "(:CLSN00107:)" in "/oragi/11.2.0.3/grid/log/ubsrac1/agent/ohasd/orarootagent_root/orarootagent_root.log".
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'ubsrac1' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'ubsrac1'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'ubsrac1' succeeded
CRS-4000: Command Start failed, or completed with errors.
HAIP startup failure considered fatal, terminating at /oragi/11.2.0.3/grid/crs/install/crsconfig_lib.pm line 1263.
/oragi/11.2.0.3/grid/perl/bin/perl -I/oragi/11.2.0.3/grid/perl/lib -I/oragi/11.2.0.3/grid/crs/install /oragi/11.2.0.3/grid/crs/install/rootcrs.pl execution failed
======================================================
final out out is as follows
[grid@ubsrac1 bin]$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 OFFLINE OFFLINE Instance Shutdown
ora.cluster_interconnect.haip
1 ONLINE OFFLINE
ora.crf
1 ONLINE ONLINE ubsrac1
ora.crsd
1 OFFLINE OFFLINE EXCLUSIVE
ora.cssd
1 ONLINE ONLINE ubsrac1
ora.cssdmonitor
1 ONLINE ONLINE ubsrac1
ora.ctssd
1 ONLINE ONLINE ubsrac1 ACTIVE:0
ora.diskmon
1 OFFLINE OFFLINE
ora.evmd
1 OFFLINE OFFLINE
ora.gipcd
1 ONLINE ONLINE ubsrac1
ora.gpnpd
1 ONLINE ONLINE ubsrac1
ora.mdnsd
1 ONLINE ONLINE ubsrac1
[grid@ubsrac1 bin]$
please i need help . . .. i am stuck here i searched the web and tried things for days and i seem to run out of ideas and solutions
any help will be greaatley aperciated ............
Thanks in advance
Regards
Rediethi damorgan
here is the out put sir, . ................
================================================
tail -200 /oragi/11.2.0.3/grid/log/ubsrac1/agent/ohasd/orarootagent_root/orarootagent_root.log
2012-10-22 08:22:33.539: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:22:33.539: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:23:00.074: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23943
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:23:02.528: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:23:02.528: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:23:03.542: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:23:03.542: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:23:32.526: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:23:32.526: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:23:33.550: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:23:33.550: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:24:00.077: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23947
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:24:02.530: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:24:02.530: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:24:02.531: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:24:03.554: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:24:03.554: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:24:30.088: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23951
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:24:32.542: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:24:32.542: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:24:33.553: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:24:33.553: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:24:33.553: [CLSFRAME][3074782976] {0:11:5628} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
2012-10-22 08:24:33.557: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:24:33.557: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:25:02.551: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:25:02.551: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:25:03.565: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:25:03.565: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:25:30.091: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23955
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:25:32.554: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:25:32.554: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:25:33.567: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:25:33.567: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:26:00.103: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23959
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:26:02.556: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:26:02.556: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:26:03.569: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:26:03.569: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:26:32.562: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:26:32.562: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:26:32.563: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:26:33.576: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:26:33.576: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:27:00.106: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23963
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5440
2012-10-22 08:27:02.569: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5440], buflen=8
2012-10-22 08:27:02.570: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5440]: mode[0xcc] offset[0 ms].
2012-10-22 08:27:03.581: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:27:03.581: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:27:03.581: [CLSFRAME][3076884224] {0:11:5630} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
2012-10-22 08:27:03.583: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:27:03.583: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:27:30.117: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23967
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5440
2012-10-22 08:27:32.570: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5440], buflen=8
2012-10-22 08:27:32.570: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5440]: mode[0xcc] offset[0 ms].
2012-10-22 08:27:33.584: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:27:33.585: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:27:33.585: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5440
2012-10-22 08:28:02.580: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5440], buflen=8
2012-10-22 08:28:02.580: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5440]: mode[0xcc] offset[0 ms].
2012-10-22 08:28:03.593: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:28:03.595: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:28:30.120: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23971
2012-10-22 08:28:32.581: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:28:32.581: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:28:32.581: [CLSFRAME][3074782976] {0:11:5632} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:28:32.584: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:28:32.584: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:28:33.598: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:28:33.598: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:28:33.600: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:29:00.132: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23975
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:29:02.585: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:29:02.585: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:29:03.600: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:29:03.600: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:29:30.145: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23977
2012-10-22 08:29:32.586: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:29:32.586: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:29:32.586: [CLSFRAME][3076884224] {0:11:5634} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:29:32.589: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:29:32.589: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:29:32.590: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:29:33.603: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:29:33.603: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:30:02.596: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:30:02.597: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:30:03.608: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:30:03.608: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:30:03.608: [CLSFRAME][3074782976] {0:11:5636} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
2012-10-22 08:30:03.612: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:30:03.612: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:30:30.147: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23983
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:30:32.601: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:30:32.601: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:30:33.615: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:30:33.616: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:31:00.158: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23987
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:31:02.601: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:31:02.601: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:31:03.616: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:31:03.616: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:31:32.610: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:31:32.610: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:31:33.625: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:31:33.625: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:32:00.160: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23991
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:32:02.613: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:32:02.613: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:32:03.628: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:32:03.628: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:32:03.628: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:32:30.173: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23995
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:32:32.616: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:32:32.616: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:32:33.630: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:32:33.630: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:33:02.622: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:33:02.622: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:33:02.622: [CLSFRAME][3076884224] {0:11:5638} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:33:02.625: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:33:02.625: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:33:03.639: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:33:03.639: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:33:30.177: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23999
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:33:32.631: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:33:32.631: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:33:33.635: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:33:33.635: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:34:00.177: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:24003
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:34:02.631: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:34:02.631: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:34:03.646: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:34:03.646: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:34:30.184: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:24007
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:34:32.637: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:34:32.637: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:34:33.651: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:34:33.651: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:35:00.188: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:24009
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:35:02.641: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:35:02.642: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:35:02.642: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:35:03.656: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:35:03.656: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
[root@ubsrac1 ~]#
================================
please take a look at it
Thanks in advance
Edited by: Red8 on Oct 22, 2012 5:50 AM -
Webtier Utilities 11.1.1.2 failed to install on Oracle Linux OEL 5.7 x86_64
Hi,
Webtier Utilities 11.1.1.2 failed to install on Oracle Linux OEL 5.7 x86_64 (Linux vilje05 2.6.18-274.3.1.0.1.el5 #1 SMP Wed Sep 7 06:02:50 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux):
[oracle@vilje05 ~]$ cd install/Disk1/
[oracle@vilje05 Disk1]$ ./runInstaller -silent -response /home2/oracle/my_response.txt -invPtrLoc /home2/oracle/orainv.loc
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 5192 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-19_03-27-57PM. Please wait ...[oracle@vilje05 Disk1]$ Lo
g: /home2/oracle/oraInventory/logs/install2011-10-19_03-27-57PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10
Actual Result: enterprise-5
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-14.el5-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-i386. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-51.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-51.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-65-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-65-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-65-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-65-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-65-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-51.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-51.el5-i386. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-51.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-51.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-51.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-51.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-11.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for VERSION=2.6.18; found VERSION=2.6.18-274.3.1.0.1.el5. Passed
Checking for hardnofiles=4096; found hardnofiles=16384. Passed
Checking for softnofiles=4096; found softnofiles=16384. Passed
Check complete. The overall result of this check is: Passed
Kernel Check: Success.
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-65
Check complete. The overall result of this check is: Passed
GLIBC Check: Success.
Expected result: 1024MB
Actual Result: 11732MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Check Env Variable Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (instance1)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (instance1)
[CONFIG]:Create and Start OHS Component (ohs1)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Provisioning OHS files for ohs1
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Skipping ohs1 component registration.
[CONFIG] FAILED:Create and Start OHS Component (ohs1)
Question Received:Failed to Start OHS Component
[CONFIG] [Web Tier Configuration]:Failed to Start OHS Component
[CONFIG] FAILED:Create and Start OHS Component (ohs1)
Configuration:Web Tier Configuration failed
Error while running Configuration.
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD failed.
[oracle@vilje05 Disk1]$
[oracle@vilje05 ~]$ opmnctl stopall
XML parser init: error 54.
opmnctl stopall: error parsing /home2/oracle/bea_default/Oracle_WT1/instances/instance1/config/OPMN/opmn/opmn.xml
===
$ cat my_response.txt
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#Set this to true if installation and configuration need to be done, all other required variables need to be provided. Variable "INSTALL AND CONFIGURE LATER TYPE" must be set to false if this is set to true as the variables are mutually exclusive
INSTALL AND CONFIGURE TYPE=true
#Set this to true if only Software only installation need to be done. If this is set to true then variable "INSTALL AND CONFIGURE TYPE" must be set to false, since the variables are mutually exclusive.
INSTALL AND CONFIGURE LATER TYPE=false
#Provide the Oracle Home location. The location has to be the immediate child under the specified Middleware Home location. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty directory or a valid SOA Oracle Home.
ORACLE_HOME=/home2/oracle/bea_default/Oracle_WT1
#Provide existing Middleware Home location.
MIDDLEWARE_HOME=/home2/oracle/bea_default
#The name of the Oracle Instance. Instance name must begin with an alphabetic character, may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters and are 4 to 30 characters long.
INSTANCE_HOME=/home2/oracle/bea_default/Oracle_WT1/instances/instance1
#Provide the Oracle Instance location. The Oracle Instance directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty or non existing directory.
INSTANCE_NAME=instance1
#If set to true, installer will auto assign ports
AUTOMATIC_PORT_DETECT=true
#This is required if "AUTOMATIC_PORT_DETECT" variable is set to false, absolute path of a staticports file location need to be provided with values for ports.\nThe template for staticports.ini can be found from Disk1/staget/Response directory of the shiphome.
STATICPORT INI FILE LOCATION=
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=<SECURE VALUE>
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=<SECURE VALUE>
[SYSTEM]
#Set true to configure Oracle HTTP Server, else skip Oracle HTTP Server configuration
CONFIGURE_OHS=true
#Set true to configure Oracle Web Cache, else skip Oracle Web Cache configuration
CONFIGURE_WEBCACHE=false
#The Oracle HTTP Server (OHS) component name (required only if CONFIGURE_OHS is set to true). OHS component name must begin with an alphabetic character, may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters and are 4 to 30 characters long.
OHS_COMPONENT_NAME=ohs1
[APPLICATIONS]
[RELATIONSHIPS]
#If set to true, the instance and components will be registered with an existing weblogic server
ASSOCIATE_WEBTIER_WITH_DOMAIN=false
==
as you see all checks passed OK, but the whole install failed. What could be wrong? And what is XML parser init: error 54?
Edited by: 892273 on Oct 19, 2011 8:12 AMWhere's the WebLogic Server home???
Else you should attach this to an existing WebLogic domain
kind regards
Michel
Edited by: Michel Schildmeijer on 20-okt-2011 15:57 -
Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf -
EBS Install on OEL 5.4 using vmware fails with RC-50004 RW-50010
Hello ALL,
I am trying to install EBS R1212 on Linux OEL 5.4 using vmware on windows xp pro and i am getting the below err in Please help...
I tried the setup with R1212 x86 and R1212 x86-64 on vmware i am getting the same error with both versions... can you please help/assist..
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = /home/oracle/EBS/startCD/Disk1
Thanks,
ArshadThanks...
I am installing R1212 i did not find any userful info...
I am trying disabling oom how to disable it in OEL 5.4 echo “0? > /proc/sys/vm/oom-kill (turn off) there is no such file....
also i am tying couple of things like...
# sysctl vm.lowmem_reserve_ratio
vm.lowmem_reserve_ratio = 256 256 32
Thanks for very quick reply... I hope it goes through this time.. -
JDeveloper 11.1.2.1.0 on OEL 5 can't open jar files and dies
I have just installed JDeveloper on a OEL 5 VM, and when I try to open or create a basic application I get a series of errors claiming that that java could not open jar files, which ultimately ends in the app dying, claiming that it has too many open files. The failures below were generated using the wizard to create a brand new "Java Desktop Application (ADF)" application. I used all default values on installation, including the bundled Java SDK. I am trying to familiarize myself with JDeveloper in preparation for a new development project, and would like to use Oracle technology since Pillar is now a part of Oracle. Any help would be appreciated.
uname -a:
Linux az-devoelvm-01 2.6.32-300.4.1.el5uek #1 SMP Fri Dec 23 03:13:22 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Below is the final failure:
SEVERE: framework event org.eclipse.osgi type 2
java.io.IOException: Too many open files
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1704)
at java.io.File.createTempFile(File.java:1792)
at org.eclipse.osgi.storagemanager.StorageManager.createTempFile(StorageManager.java:714)
at org.eclipse.osgi.storagemanager.StorageManager.getOutputStream(StorageManager.java:776)
at org.eclipse.osgi.internal.baseadaptor.BaseStorage.saveBundleDatas(BaseStorage.java:550)
at org.eclipse.osgi.internal.baseadaptor.BaseStorage.saveAllData(BaseStorage.java:439)
at org.eclipse.osgi.internal.baseadaptor.BaseStorage.access$1(BaseStorage.java:427)
at org.eclipse.osgi.internal.baseadaptor.BaseStorage$StateSaver.run(BaseStorage.java:1219)
And this is an example of the failures to open the jar files:
SEVERE: framework event oracle.external.weblogic-script-runner type 2
java.util.zip.ZipException: Exception in opening zip file: /home/earnett/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar
at org.eclipse.osgi.framework.util.SecureAction.getZipFile(SecureAction.java:264)
at org.eclipse.osgi.baseadaptor.bundlefile.ZipBundleFile.basicOpen(ZipBundleFile.java:88)
at org.eclipse.osgi.baseadaptor.bundlefile.ZipBundleFile.getZipFile(ZipBundleFile.java:101)
at org.eclipse.osgi.baseadaptor.bundlefile.ZipBundleFile.checkedOpen(ZipBundleFile.java:74)
at org.apidesign.netbinox.JarBundleFile$1.checkedOpen(JarBundleFile.java:119)
at org.eclipse.osgi.baseadaptor.bundlefile.ZipBundleFile.getEntry(ZipBundleFile.java:246)
at org.apidesign.netbinox.JarBundleFile.findEntry(JarBundleFile.java:199)
at org.apidesign.netbinox.JarBundleFile.resource(JarBundleFile.java:163)
at org.netbeans.core.netigso.spi.NetigsoArchive$1.resource(NetigsoArchive.java:71)
at org.netbeans.Archive.getData(Archive.java:199)
at org.netbeans.NetigsoFramework.fromArchive(NetigsoFramework.java:130)
at org.netbeans.core.netigso.Netigso.fromArchive(Netigso.java:461)
at org.netbeans.core.netigso.spi.NetigsoArchive.fromArchive(NetigsoArchive.java:101)
at org.apidesign.netbinox.JarBundleFile.getCachedEntry(JarBundleFile.java:210)
at org.apidesign.netbinox.JarBundleFile.getEntry(JarBundleFile.java:218)
at org.eclipse.osgi.baseadaptor.bundlefile.BundleFile.internalGetResourceURL(BundleFile.java:151)
at org.eclipse.osgi.baseadaptor.bundlefile.BundleFile.getResourceURL(BundleFile.java:147)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findResourceImpl(ClasspathManager.java:351)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalResources(ClasspathManager.java:329)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalResources(DefaultClassLoader.java:212)
at org.eclipse.osgi.internal.loader.BundleLoader.findLocalResources(BundleLoader.java:769)
at org.eclipse.osgi.internal.loader.SingleSourcePackage.getResources(SingleSourcePackage.java:41)
at org.eclipse.osgi.internal.loader.MultiSourcePackage.getResources(MultiSourcePackage.java:51)
at org.eclipse.osgi.internal.loader.BundleLoader.findResources(BundleLoader.java:688)
at org.eclipse.osgi.internal.loader.buddy.RegisteredPolicy.loadResources(RegisteredPolicy.java:114)
at org.eclipse.osgi.internal.loader.buddy.PolicyHandler.doBuddyResourcesLoading(PolicyHandler.java:168)
at org.eclipse.osgi.internal.loader.BundleLoader.findResources(BundleLoader.java:709)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findResources(DefaultClassLoader.java:162)
at java.lang.ClassLoader.getResources(ClassLoader.java:1039)
at java.util.ServiceLoader$LazyIterator.hasNext(ServiceLoader.java:323)
at java.util.ServiceLoader$1.hasNext(ServiceLoader.java:415)
at oracle.adfdt.model.DataControlManager.addDataControlFilter(DataControlManager.java:763)
at oracle.adfdtinternal.model.ide.dbpanel.DataControlFilterPalette.jbInit(DataControlFilterPalette.java:105)
at oracle.adfdtinternal.model.ide.dbpanel.DataControlFilterPalette.<init>(DataControlFilterPalette.java:97)
at oracle.adfdtinternal.model.ide.dbpanel.DataBindingDockeableWindow.<init>(DataBindingDockeableWindow.java:95)
at oracle.adfdtinternal.model.ide.dbpanel.DataSourceDockableFactory.getDockWindow(DataSourceDockableFactory.java:62)
at oracle.adfdtinternal.model.ide.dbpanel.DataSourceDockableFactory.getDockable(DataSourceDockableFactory.java:81)
at oracle.ideimpl.docking.DockStationImpl.createDockable(DockStationImpl.java:1452)
at oracle.ideimpl.docking.DockStationImpl.findDockable(DockStationImpl.java:1432)
at oracle.ideri.navigator.NavigatorDockableFactory.createDrawer(NavigatorDockableFactory.java:70)
at oracle.ideri.navigator.NavigatorDockableFactory.access$200(NavigatorDockableFactory.java:32)
at oracle.ideri.navigator.NavigatorDockableFactory$ProxyAwareHostedDockableListener.hostedDockableRegistered(NavigatorDockableFactory.java:221)
at oracle.ideimpl.docking.HostedDockableHook$2.run(HostedDockableHook.java:119)
at oracle.ideimpl.extension.ExtensionManagerImpl$AfterExtensionLoadingRunnable.run(ExtensionManagerImpl.java:2130)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1585)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
at oracle.ideimpl.feedback2.client.ui.CustomerFeedbackDialog.runDialog(CustomerFeedbackDialog.java:110)
at oracle.ideimpl.feedback2.client.FeedbackManagerImpl.showCustomerFeedbackDialog(FeedbackManagerImpl.java:525)
at oracle.ideimpl.feedback2.client.FeedbackManagerImpl.showFeedbackDialog(FeedbackManagerImpl.java:360)
at oracle.ideimpl.feedback2.client.FeedbackManagerImpl$2.run(FeedbackManagerImpl.java:238)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1585)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:352)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:243)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:215)
at oracle.jdeveloper.template.wizard.NewObjectFromTemplateWizard$WizardEventAdapter$1ProgressRunnable.start(NewObjectFromTemplateWizard.java:497)
at oracle.jdeveloper.template.wizard.NewObjectFromTemplateWizard$WizardEventAdapter.wizardFinished(NewObjectFromTemplateWizard.java:537)
at oracle.bali.ewt.wizard.BaseWizard.processWizardEvent(BaseWizard.java:2525)
at oracle.bali.ewt.wizard.BaseWizard.processEventImpl(BaseWizard.java:2566)
at oracle.bali.ewt.LWComponent.processEvent(LWComponent.java:658)
at oracle.bali.ewt.wizard.BaseWizard.doFinish(BaseWizard.java:2171)
at oracle.bali.ewt.wizard.BaseWizard$Action$1.run(BaseWizard.java:3948)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1585)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:382)
at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:298)
at oracle.jdeveloper.template.wizard.NewObjectFromTemplateWizard.runWizard(NewObjectFromTemplateWizard.java:117)
at oracle.jdeveloper.template.wizard.GalleryItemAdapter.invoke(GalleryItemAdapter.java:56)
at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:446)
at oracle.ide.wizard.WizardManager$1.run(WizardManager.java:530)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:127)
at java.util.zip.ZipFile.<init>(ZipFile.java:144)
at org.eclipse.osgi.framework.util.SecureAction$14.run(SecureAction.java:255)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.util.SecureAction.getZipFile(SecureAction.java:253)
... 146 moreHi
I run JDeveloper on Ubuntu without a problem, please make sure you have enough permissions on the directory where JDeveloper was installed. Also have you make the installation with the same user? What's your JDK version?
- Juan Camilo -
64 bit OEL install hangs at installing dogtail in OVM 2.2
I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
VM-Server Specs
[root@vm-server ~]# uname -a
Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
[root@vm-server ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)2 new updates
1) I get the same errors when trying a command line install
2) I can successfully create fully virtualised VMs
So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates. -
Hi all,
I have some issue with OEL 6.1 YUM proxy.
*[root@rac1 tmp]# uname -a*
Linux rac1.oracle.cloud 2.6.32-100.34.1.el6uek.x86_64 #1 SMP Wed May 25 17:46:45 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
*[root@rac1 tmp]# rpm -qa | grep yum*
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-3.2.29-17.0.1.el6.noarch
yum-rhn-plugin-0.9.1-26.0.2.el6.noarch
yum-utils-1.1.30-6.el6.noarch
PackageKit-yum-plugin-0.5.8-19.0.1.el6.x86_64
PackageKit-yum-0.5.8-19.0.1.el6.x86_64
*[root@rac1 tmp]# cat /etc/yum.repos.d/public-yum-ol6.repo*
[ol6_ga_base]
name=Oracle Linux 6 GA - $basearch - base
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=0
enabled=1
[ol6_u1_base]
name=Oracle Linux 6 U1 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=0
enabled=1
*[root@rac1 tmp]# cat /etc/yum.conf*
[main]
cachedir=/var/cache/yum/$basearch/$releasever
debuglevel=2
sslverify=false
logfile=/var/log/yum.log
pkgpolicy=newest
distroverpkg=redhat-release
tolerant=1
exactarch=1
# The proxy server - proxy server:port number
proxy=http://xxx.xxx.xxx.xxx:3128
# The account details for yum connections
proxy_username=xxx
proxy_password=@$xxx
*[root@rac1 tmp]# yum update*
http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 5 - "Couldn't resolve proxy '[email protected]'"
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: ol6_ga_base. Please verify its path and try again
[root@rac1 tmp]#
In OEL5.7 this works fine without any problem. I think this related to OEL6.1, maybe YUM does not understand proxy, my password for proxy starting with @$ but I changed my password and
output is changed to
*[root@rac1 tmp]# yum update*
http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 407"
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: ol6_ga_base. Please verify its path and try again
[root@rac1 tmp]#
If anyone can help me please reply.
./thanksAvi Miller wrote:
__OUTSIDER___ wrote:
No this will not help. Problem is not related to password I changed it and response is It might help, it's worth trying. Try this:
# export http_proxy='http://proxy.domain.com:3128'
# wget --proxy-user="xxx" --proxy-password="xxx" http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/x86_64/repodata/repomd.xmlIf that works, it is a yum problem. If it doesn't work, it's a proxy problem.Yes it works , interesting that user and password parameters not working with double quotes only with single.
I also checked this with YUM but YUM is having problem with passwords that starting
with "@" symbol. I try to set
export http_proxy="http://username:\@$passwd@IP:PORT"
for ignoring "@" symbol but no sucess. With OEL5 this is not a problem. In /etc.yum.conf same username and same password.
Perhaps I should change my password :)
and last one thing in my home network I have OEL6.1 ( where fortunately with no proxy :) ) I try update linux with "yum update" command
and it returns that no packages to update , can you tell me why because there are new kernel avalable and I can download and install this new kernel with command "yum install kernel". -
Install OEL 6.4 on 3TB harddisk
Hi Guys,
I'm trying to install fresh OEL 6.4 (64 bit) over my new 3 TB HDD, (though in BIOS it's showing detected and seeing 3000GB, enabled all required options like onchip SATA Type set it to SATA, EFI CD/DVD Boot Option to EFI) but unable install it as getting stuck on 'waiting for hardware to initialize'
I can see starting screen with Oracle Logo and getting 5 options as below,
1) Install or upgrade an existing system
2) Install system with basic video driver
3) Rescue Installed system
4) Boot from local drive
5) Memory test
If I choose 1st option, then DVD loads bootable files but gets stuck on 'waiting for hardware to initialize' and then blank screen with blinking cursor.
I would like to know how to use parted (as it's more than 2.2 TB) command when HDD is new ? or what is other way out to install OEL on 3TB HDD ?
(I've tried on my laptop, and installation gets start without any issue)
yours help would be appreciated.
Thanks,
Manish NashikkarThe problem is probably your video graphics adapter. I suggest the following:
While the cursor is on option 1 hit the <tab> key then add the parameter " nomodeset" and press <enter> to start the system.
If the above does not work, try option 2.
Note that OEL has changed to Oracle Linux or short OL and is designed for server hardware. Support for Desktop or Laptop computers is limited and requires depends on open source and hardware vendor.
Maybe you are looking for
-
FiOS TV: First Impressions of a New Customer
I’ve been a DirecTV customer for about 10 years. D* has been my primary provider except for 2 years when Dish Network was. I had switched to E* because D* had something like 12 HD channels while E* had the VOOM Network channels. I dropped E* like a h
-
I am creating a video library of approximately 100 video clips - suggestions or thoughts from anyone who has done this before and the best way to do it, and best file format? I am leaning towards wmv simply because that is how the videos are now - an
-
TS1492 How do I fix error 11333, can,t connect to itunes?
How do I fix error 11333, cannot connect to iTunes when I try to connect to iTunes
-
Airtunes Suddenly Stopped Working After Update
In the last two weeks i installed Leopard and the most recent iTunes update. today first time i try to use Airtunes - which worked fine before. i open iTunes and see my Airport Express Airtunes in italics in the output choice box at lower righthand c
-
How to enter the new UEFI( BIOS ), if UEFI does not respond to F10(esc, e.t.c.) at startup?
1) I bought a HP 255 .. preloaded with licensed windows 8.1 (overpaying about $ 150 compared with the same nout. with pre-dos , 2)yesterday update the "BIOS" -UEFI- from HP website and on the recommendation and with the help of an assistant "Assistan