OEL 5.4 and paravirtualized drivers

Hi There
I have installed OEL 5.4 as the guest on Oracle VM Server. I did do an paravirtualized install. I then updated OEL 5.4 to the latest up2dates :)
Do I need to still install paravirtualized drivers or did it happen automatically ?
Ciao
Nardus

Although it does not look like it, this document explains how to do what you are
asking:
Oracle VM: Comparison of Guest Virtualisation Modes; HVM, PVM and PVHVM (Doc ID 757719.1)

Similar Messages

Sever issue with Xorg and Nvidia Drivers

I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
Build Date: 27 February 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "AOC 7F+"
(**) | |-->Device "NVIDIA 6200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c34a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): AOC Spectrum7F (CRT-0)
(--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

No ... the problem is in the kernel that comes precompiled.
I did this test.
The first time I installed the kernel I unloaded nvidiafb since I dont like it.
When I install nvidiafb back something strange happends. Nvidia module fails to load.
The modprobe sais it cannot find the device nvidia.ko ... but it is there!
So my best guess is, there is something with the kernel. Any ideas?
Problem resolved, installed older driver
Last edited by Nefer-Ra (2007-03-22 02:59:25)

MSI K9A Platinum and VIA drivers issue? XP 0x0000007B stop error.

I get a Windows Stop error when trying to boot into Windows XP with new components. The SATA hard drive (and Windows XP installation) is from the old computer.
The new computer components are:
MB: MSI K9A Platinum, chipset: RD580 (North Bridge), SB600 (South Bridge)
CPU: AMD Athlon 64 x2 5600+, boxed (the cooler and fan came with the CPU).
Video: MSI Radeon 1950 XTX
The old (and working) computer setup is:
OS: XP Professional
MB: Abit AV8-3rd Eye, chipset: VIA K8T800Pro + VT8237
CPU: AMD Athlon 64 3500+
Video: Sapphire Radeon 9800Pro All-in-Wonder, videodriver: atidvag.dll version 6.14.10.6542
HD: Maxtor 6B200M0 SCSI Disk Device
BIOS: Phoenix 6.00PG 20.04.2005
System drivers with "via" in the name: VIAAGP1.SYS, viaide.sys, viasride.sys
VIA 4in1 (Hyperion) version: 4.55 (that can be found at HKEY_Local_Machine\Software\Via4in1Driver).
VIA 2.20e SATA/RAID driver was used when installing this computer setup.
The precise stop error is:
0x0000007B (0xba4c3528, 0xc0000034, 0x00000000, 0x00000000)
From many sites I have gathered that the error is related to Windows XP not being able to access a critical system drive. Most probably the SATA hard drive issue.
The problem probably is the VIA drivers of the old motherboard and/or the SATA driver.
First I should mention, that MSI K9A Platinum does not have a hard disk SATA driver. If it does, I have been unable to find one. Certainly no such floppy disk included, and no such driver in the MSI's Web page for this motherboard.
Second important point: I never used RAID. I did use VIA 2.20e SATA/RAID driver disk when installing Windows XP to the old computer.
Strange that the hard drive model is reported as a "SCSI Disk Device". It's not a SCSI drive however: it's a SATA disk.
I have tried to uninstal the motherboard chipset drivers (Hyperion v4.55), but there seems to be a bug here: the drivers should be uninstalled using the installation program, and select the uninstall option. However, I do not get the uninstallation option to choose at all! Yes, I'm using the normal installation mode, not the quick installation (although tried that, too). The Hyperion setup program just installs, and asks to reboot the computer. After rebooting and trying again, it still does not offer me an uninstallation choise.
I know how to install hard drive VIA SATA driver, but I have no idea how to uninstall it. And I'm afraid to do that without certainty that it IS the solution, since I could not access the hard drive any more in the old computer setup (and return to read this forum). Also, I do not have a floppy drive any more. Anyone know if there is an issue with K9A and XP having VIA SATA driver installed?
When I tried the new computer setup, I first tried the simplest possible hardware combination: there were no CD/DVD-drives, no (parallel)IDE hard drives, and no PCI cards, except the MSI video adapter.
My BIOS Setup experiments. None of these helped: got the same stop error each time.
1) I didn't much touch the BIOS setting first. Just tried to boot with the settings BIOS came with.
2) Next I disabled the integrated audio, LAN and IEE1394 devices and floppy drive and disabled all other choises except the SATA drive as a boot device.
3) Next I tried with the fail-safe BIOS defaults.
4) Cleared CMOS.
5) Changed OnChip SATA type from Native IDE to Legacy IDE. (Only one boot attempt with the setting as Legacy.)
6) Disabled PCI IDE BusMaster.
7) Never touched anything in the Cell Menu: so the settings are in minimum.
A step I have taken after the last attempt: run Windows XP hard drive error-checking tool to every logical drive with the fix option selected, and the system drive also with scan the bad sectors option selected.
My plans next are:
1) to install a newer Hyperion driver. If that would correct the no-unistallation-choice-bug,
2) to disable USB-devices in the BIOS (desperate),
3) to choose the Windows general video display driver (although I seriously doubt this is a display driver problem!).
4) to uninstall the Anti-Virus software (Avira Antivir).
I've read a numerous Web pages so far about the 0x0000007B stop error. Here are some links:
Quote
http://www.seagate.com/www/en-us/support/knowledge_base/
Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE
This Stop message, also known as Stop 0x7B, indicates that Windows XP Professional lost access to the system volume or boot volume during the startup process. This error always occurs while the system is starting and is often caused by one of the following:
* Hardware problems
* Corrupted or incompatible storage drivers
* File system problems
* Boot sector viruses
* Outdated firmware
During I/O system initialization, this error can occur when:
* The controller or driver for the startup device (typically the hard disk) failed to initialize the necessary hardware.
* File system initialization failed because the system did not recognize the data on the boot device.
Quote
http://support.microsoft.com/kb/314082
You receive a Stop 0x0000007B error after you move the Windows XP system disk to another computer
SYMPTOMS
After you move the Microsoft Windows XP system (boot) disk to a backup computer, you may receive the following Stop error when you try to start the Windows XP-based backup computer:
STOP: 0x0000007B (0xF741B84C,0xC0000034,0x00000000,0x00000000)
CAUSE
This error may occur if the registry entries and the drivers for the mass storage controller hardware in the backup computer are not installed in Windows XP.
RESOLUTION
To resolve this error, use the same hardware for the backup computer.
Heh, heh! Very nice Microsoft, but I plan to update my computer, so I NEED to use different components
Quote
http://support.microsoft.com/kb/324103
Device Driver Issues
You may receive a "Stop 0x0000007B" error message in the following scenarios:
•   A device driver that the computer boot controller needs is not configured to start during the startup process.
•   A device driver that the computer boot controller needs is corrupted.
•   Information in the Windows XP registry (information related to how the device drivers load during startup) is corrupted.
Hardware Issues
You may receive a "Stop 0x0000007B" error message if there is a resource conflict between the boot controller and another controller or between SCSI devices. You may also receive this Stop error message if drive translation is not being performed or if drive translation was changed. To troubleshoot this issue:
1.   If an IRQ or I/O port address conflict exists between the boot controller and another controller, Windows XP either stops responding (hangs) or displays a "Stop 0x0000007B" error message. If you recently added new hardware, remove the new hardware or reconfigure it so that it does not conflict with the resources of any other installed controllers.
2.   If you are using a SCSI hard disk, check the SCSI chain for correct termination. Remove any unused SCSI devices or make sure that each SCSI ID is unique.
3.   Make sure that drive translation is turned on (if it is required) and that it has not been changed. For example, if you recently switched controllers, this issue may occur. For additional information about this issue, click the following article number to view the article in the Microsoft Knowledge Base: 314082.
Quote
http://support.microsoft.com/kb/316401/
SYMPTOMS
When you start your Microsoft Windows XP-based computer after you replace the motherboard on the computer, you may receive a Stop error message that is similar to the following:
STOP 0x0000007B INACCESSABLE_BOOT_DEVICE
CAUSE
This issue may occur if the new motherboard contains an embedded IDE controller that has a different chipset than the original motherboard.
RESOLUTION
Method 1: Perform an in-place upgrade of Windows XP [<- That means repair installation of Windows XP]
•   Do not use a repair or in-place upgrade if you suspect disk problems.
Method 2: Repartition and format your hard disk and reinstall Windows XP

Alright I got the situation over.
Quote from: Roskaposti on 19-May-07, 04:44:59
My plans next are:
1) to install a newer Hyperion driver. If that would correct the no-unistallation-choice-bug,
2) to disable USB-devices in the BIOS (desperate),
3) to choose the Windows general video display driver (although I seriously doubt this is a display driver problem!).
4) to uninstall the Anti-Virus software (Avira Antivir).
I did try all all the above, and none of them helped.
And by the way: after installing the new Hyperion (VIA chipset drivers), I was finally able to also uninstall. It also uninstalled the IDE SATA (I think) and PATA drivers.
But what I had to do, was to make a REPAIR installation of Windows XP.
So, I was wondering now afterwards: this is really, really silly. Why the hell we need to re-install Windows if we move the SYSTEM SATA drive to another computer? We don't have similar problem with parallel IDE drives. Whom should we thank here??
The issue is to insert the driver files and the information of the ide drivers Windows should use with the next boot. How can it be this difficult?
What you basically need is..
- the information about the new chipset's PCIIDE.SYS/[VENDOR_PROVIDED_FILE].SYS and ATAPIIDE.SYS inserted into the values in HKEY_LOCAL_MACHINE\SYSTEM\ControlSetXXX\Control\CriticalDeviceDatabase
- and the vendor's IDE drivers to the %SYSTEMROOT%/System32/drivers folder.
Maybe something else, I don't know. But the problem was, Windows didn't know how, or what drivers to use. That can't be so big problem you need to install the whole OS anew!

Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf

New MacBook Pro 10.7.2 trying to connect to HP laserjet 1200 w wireless. Tried generic driver and hpdriver and gutenprint drivers. "Unable to connect due to error". Deleted prefs, restarted etc. Any ideas ?

Just purchased a MacBook Pro OS 10.7.2. Cannot get it to print with HP LaserJet 1200.
Connection is wireless, able to ping printer. (also tried MacBook using ethernet).
This HP 1200 prints perfectly with another mac running Snow Leopard.
Tried HP 1200 driver, which, according to HP, is not working with 10.7.2; They suggested Gutenprint
tried generic printer from Mac, (message was printer is busy);
tried CUPS Gutenprint 5.0.2,(message says "unable to connect due to an error"
removed preferences and re-added printer, rebooted etc.
Any thoughts? I thought it was the driver, maybe there are other drivers out there or maybe it's something else???? Thanks

Thanks for the replys.
After spending an hour plus, uninstalling and reinstalling drivers and still not able to print, my husband, sits down, plugs in an ethernet cable, reinstalls the printer with the ip, and it prints. !!! I'd already done that , but that was before I deleted the preferences and installed the Gutenprint driver. I think it was the new Gutenprint driver that did it.

HT5628 How to fix track pad and audio drivers if we install windows 8 on macbook pro??

Can anyone help me how to install track pad and audio drivers for my MBP if i install windows 8 on it?

Run Boot Camp Assistant and select the menu option to download the Windows Support software, Then start Windows and install the Windows Support software. Follow the Boot Camp instructions which detail how to download and install the drivers (Windows Support software).

Official release of XP and Vista drivers for Satellite Pro P100-465 PSPAEE

When will the drivers be available for both XP and Vista for the PSPAEE? Currently there are drivers for the PSPA4E some of which work, some not, on either operating system. Yes the laptop is preinstalled with the Vista Ugrade and the drivers work but two of the driver apps are blocked by Defender (NDSTRay / ConfigFree and VolControl). I could get no options to enable these (unclassified as yet from MS so they are locked out) I was told to disable Defender by tech-support!
I have tried a clean install of my own version of Vista Business and had driver problems with that as well.
I would like to run XP until Vista is, shall we say, more efficient but would like to use drivers specifically for it so a time-frame would be very useful.
I'd also like to know why there is a plug where a finger-scanner could go underneath the 0 of the number-pad, and a blocked-off lower PCMCIA (PCI-E?) port when neither of these are available as upgrade options? Did I miss those upgrade options or is this a case recycled from another model where they are available? If the latter then that's pretty cheap for a new machine :)

The Toshiba USA site offers comprehensive information on Vista upgrade and drivers for P100/105 machines which include similar ones to those released in the UK/Europe. If you want to be at the bleading edge of technology/take a chance see
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1671921&moid=1674690&BV_S essionID=@@@@1075792543.1174388169@@@@&BV_EngineID =ccciaddkhddlhhkcgfkceghdgngdgmn.0&ct=DL
Cheers
Martyn

Windows 7 Wireless and Audio Drivers on 2010 MacBook Pro

I have a new MacBook Pro i7 2.66 Mhz with Snow Leopard and dual boot to Windows 7 64 bit Ultimate. I can't find the correct drivers (Windows 7 side) to get the audio and the wireless networking operating. I ran the bootcamp setup from the Snow Leopard install disc on Windows 7. It gave an error message that this model is not supported. I then ran each software driver individually from the install disc and was able to get all to work except the audio and wireless. I then installed the Bootcamp 3.2 update from the Internet with no improvement.
Does anybody know where the audio and wireless drivers can be located for Windows 7? (Apple Support has not been able to resolve the problem yet) Thank You!

I'm having the same problem with Windows 7 64-bit Professional. I had to go through the same process to get most of the drivers installed. I've had the same issues with the wireless and audio drivers.
To get the Apple drivers installed, I followed the instructions from this blog post.
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang= en
Has anyone had any luck with the rest of the drivers?

How to run a remote windows dll files and the drivers of the system using j

Dear Friends,
I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
reply regd thanking you

Please don't make duplicate posts like this.

Any difference in the dbms and jdbc drivers btw oracle 8i lite and 9i lite

Is there any significant difference between oracle 8i lite and oracle 9i lite in terms of database and jdbc drivers?
If not, it may be better off using oracle8i.

According to Oracle , 9i lite is more powerful than 8i Lite.
one thing, 8i Lite is not certified for windows 2000.
jothi

Difference between Thin Drivers and Thick Drivers

hi all,
can any one tell me the difference between Thin Drivers and Thick Drivers.
regards
ravi

OCI is Oracle Call Interface. That's the lowest-level client API Oracle offers and the API that every thick client application eventually uses. For example, a C++ application using ADO would use the OLE DB driver which is itself written in OCI.
From a deployment standpoint, the major difference is that the thin driver can be deployed to any machine that has Java installed. The OCI driver can only be deployed to machines that have the Oracle client installed.
From a performance & functionality standpoint, there are features that only the OCI driver provides. Depending on the application, the OCI driver may also be faster.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Atention Satya:How to find Noisefigure by using RFSG and RFSA Drivers

Sir,
I want to find Noise figure by using RFSG and RFSA drivers pls send a LabView code for this.....
Regards,
Santhosh M

Santosh,
Could you give us a little bit more details on the setup that you have. Do you have both the RFSA and the RFSG. Also, if you have the Spectral Measurements Toolkit that will help. The noise figure is the ratio of the SNR of the system input and the SNR of the system output. Are you planning on reading in two signals or are you going to generate a signal to some kind of DUC and read it back in the RFSA? The SNR of signals can be found using the Spectral Measurements Toolkit and hence the noise figure as well.
Looking forward to hear from you.
Regards,
Raajit L
National Instruments

Installing x64 and x86 drivers for a HP Laserjet p1505n printer on Windows Server 2008

How do you install both x64 and x86 drivers for a p1505n on a 2008 server? I have now managed to install 64 bit drivers but can't install x86 drivers in the normal way using Additional Drivers from the Sharing tab. I am also trying to do similar for a laserjet 1022n printer.

On the 2008 Server x64 I installed the FULL driver package 163mb.
I installed the HP P1505n on Server 2008 and made sure that was working.
Then I went back in and did the Additional Driver thing and when it asked for the driver for x86 I went to the
C:\hp_P1000_P1500_Full_Solution folder and scrolled to the bottom and there was the x86 XP driver.
I hope this helps someone.

Root.sh failed:Raw devices for OEL 5.3 and 10.2.0.4 RAC

Hi
We have OEL 5.3 and Oracle RAC 10.2.0.4
While installing clusterware and running root.sh we are getting the error
Failed to upgrade the cluster registry.
Further the ocrconfig.log are as below:
ocrconfig_20527.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-08-04 04:38:41.540: [ OCRCONF][286303376]ocrconfig starts...
2009-08-04 04:38:41.540: [ OCRCONF][286303376]Upgrading OCR data
2009-08-04 04:38:41.615: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.616: [ OCRRAW][286303376]ibctx:1:ERROR: INVALID FORMAT
2009-08-04 04:38:41.616: [ OCRRAW][286303376]proprinit:problem reading the bootblock or superbloc 22
2009-08-04 04:38:41.616: [ default][286303376]a_init:7!: Backend init unsuccessful : [22]
2009-08-04 04:38:41.616: [ OCRCONF][286303376]Exporting OCR data to [OCRUPGRADEFILE]
2009-08-04 04:38:41.616: [ OCRAPI][286303376]a_init:7!: Backend init unsuccessful : [33]
2009-08-04 04:38:41.616: [ OCRCONF][286303376]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2009-08-04 04:38:41.619: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.619: [ OCRRAW][286303376]ibctx:1:ERROR: INVALID FORMAT
2009-08-04 04:38:41.619: [ OCRRAW][286303376]proprinit:problem reading the bootblock or superbloc 22
2009-08-04 04:38:41.619: [ default][286303376]a_init:7!: Backend init unsuccessful : [22]
2009-08-04 04:38:41.623: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.623: [ OCRRAW][286303376]ibctx:1:ERROR: INVALID FORMAT
2009-08-04 04:38:41.623: [ OCRRAW][286303376]proprinit:problem reading the bootblock or superbloc 22
2009-08-04 04:38:41.626: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.641: [ OCRRAW][286303376]propriowv: Vote information on disk 0 [dev/raw/raw1] is adjusted from [0/0] to [2/2]
2009-08-04 04:38:41.646: [ OCRRAW][286303376]propriniconfig:No 92 configuration
2009-08-04 04:38:41.646: [ OCRAPI][286303376]a_init:6a: Backend init successful
2009-08-04 04:38:41.663: [ OCRCONF][286303376]Initialized DATABASE keys in OCR
2009-08-04 04:38:41.677: [ OCRCONF][286303376]csetskgfrblock0: clsfmt returned with error [4].
2009-08-04 04:38:41.677: [ OCRCONF][286303376]Failure in setting block0 [-1]
2009-08-04 04:38:41.677: [ OCRCONF][286303376]OCR block 0 is not set !
2009-08-04 04:38:41.678: [ OCRCONF][286303376]Exiting [status=failed]...
Any solution please?
Supriya Sh

There are a couple of errors that doesn't make the clusterware look fine.
There was no previous version of OCR. error:PROC-33: Oracle Cluster Registry is not configured
proprinit:problem reading the bootblock or superbloc 22
This could mean either your cluster registry file is corrupt or you don't have access to the raw devices. Check the access to the shared storage raw device is valid. If this is not true, then make sure you have all your backup files ready.
~ Madrid
http://hrivera99.blogspot.com

Language choice for library to be linked in both KMDF and UMDF drivers

Hello,
I'm writing a library that needs to be linked into both KMDF and UMDF drivers and was wondering if i can use C++ to write the library. C++ in UMDF should work fine, but going over lot of discussions about using C++ in KMDF drivers,
it looks like very basic C++ should work fine but using virtual functions, new/delete etc will probably come back and bite you in many ways. Most of these discussions are from way back in 2009 or earlier.
Do those still hold true ? What is the extent of C++ i can use in a library that will be linked into both UMDF and KMDF drivers ?
Thanks
-R___K

If you are using the Win8 WDK or later, you should be able to use a very limited C++ and the tools will flag constructs that are not supported. The discussions you found are mostly still valid, there is no new and delete (unless you roll your
own), but you can use simple classes and C++ syntax. Basically take a look at the old forum post
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/452f4f41-6a81-4cfc-a5b6-46e0b76dfbe5/support-of-vs2011-in-c-for-device-drivers?forum=wdk
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

OEL 5.4 and paravirtualized drivers

Similar Messages

Maybe you are looking for