OEL 5.5 on SunFire 4450?

Has anyone installed OEL 5 (any update) on a SunFire 4450? I tried several times and they all failed. After burning the DVD from downloads (from OTN), the installation stalls at this stage - Need Enterprise Linux CD, please insert disk.
If anyone was able to do a sucessful install, please let me know where to get the software from.
Thanks,
Dan.

danwill wrote:
Has anyone installed OEL 5 (any update) on a SunFire 4450? I tried several times and they all failed. Error?
We are running different versions of RHEL and OEL on various Sunfire models (from the old v20z's, v40's, x4100's, x4600's etc). Cannot recall any installation problems. We used RHEL downloaded ISO images, kickstart images via bootp, and OEL downloaded ISO images.
Do you have trouble booting the actual DVD media? Make sure you download the correct installation media - and burn it as an ISO image (as downloaded) and not as a data created DVD (i.e. mounted ISO via loop device and copying contents to DVD).

Similar Messages

Problem with Fresh Install of OEL 6.3 x86_64 over old OEL 6.0 x32

Dear Experts,
After selecting packages for fresh installation of OEL 6.3 x86_64 over old OEL 6.0 32-bit, it gives me the following warning
Some of the packages you have selected for install are missing dependencies. You can exit the installation, go back and change your package selections, or continue installing these packages without their dependencies.
Details
lvm2-2.02.83-3.el6.i686 requires lvm2-libs = 2.02.83-3.el6
kernel-uek-2,6,39-200.24.1.el6uek.x86_64 requires kernel-uek-firmware = 2.6.39-200.24.1.el6uek
lvm2-3.02.72-8.el6.i686 requires lvm2-libs = 2.03.72-8.el6
gdb conflicts with elfutilsHow to avoid this warning?
Best Regards
Mahmoud

Hi Dude,
Thank you for your response.
I didn't choose upgrade. I chose Fresh Installation.
Sorry for not giving background about the problem
The OEL 6.0 x32 was installed on a server with 64bit architecture, so the power of the server is not utilized well.
I want to completely replace the OEL 6.0 (32 bit) system with OEL 6.3 (64 bit)
Just I choose the mount point of /root and /boot and leave the all partitions with no formatting to save the old data
The above warning in the first post appears. How to avoid it?
Regards
Mahmoud

Page can not be Displayed in EBS R12 64bit - OEL 5.4 64bit

Hi Hussein,
I have just installed EBS R12 (12.0.4) 64 bit on OEL 5.4 64bit, for our new client.
The installation was successfull in general, but as usual I hit with this "Page Can Not Be Displayed" error and the client side ie browser.
I can startup and shutdown the DbTier with status "0".
I can startup and shutdown the AppsTier with status "0" (well it shows this overall status at the end, but I see some error with "OHS")
This the sample log of the AppsTier:
[applprod1@rdbms2 ~]$ ./startAPP
You are running adstrtal.sh version 120.13.12000000.3
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.4.12000000.3
Starting Oracle Process Manager (OPMN) ...
opmnctl: opmn started.
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/app                                             l/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.6.12000000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rdbms2.ficsd.com:6200
    0 of 1 processes started.
ias-instance id=VIS_rdbms2.rdbms2.ficsd.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=399901443,pid=2395)
    failed to start a managed process after the maximum retry limit
    Log:
    /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/ora/10.1.3/opmn/HTTP_Server~1
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl                                             /admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.11.12000000.2
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 0
adoacorectl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/a                                             ppl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.12.12000000.3
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 0
adformsctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/ap                                             pl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.6.12000000.2
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 0
adoafmctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_VIS.
adalnctl.sh: exiting with status 0
adalnctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.14
Starting concurrent manager for VIS ...
Starting VIS_1001@VIS Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u02/applprod1/VIS/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for VIS on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
adstrtal.sh: Exiting with status 0
adstrtal.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adstrtal.log for more information ...As you can see, the last had overall status code "0"
But there is this error:
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rdbms2.ficsd.com:6200
0 of 1 processes started.
ias-instance id=VIS_rdbms2.rdbms2.ficsd.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=399901443,pid=2395)
failed to start a managed process after the maximum retry limit
Log:
/u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/ora/10.1.3/opmn/HTTP_Server~1
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u02/applprod1/VIS/inst/apps/VIS_rdbms2/logs/appl/admin/log/adapcctl.txt for more information ...
But it says status 0 too, does this cause the "web page can not be displayed"?
Please Help........................
Thanks a lot in advance

Did you remove the lock files as suggested before?Not yet, I am not at the client right now, I will go there tomorrow morning. I am just practising here in our office test instance :)
The access log file has:
127.0.0.1 - - [01/Oct/2009:21:57:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:57:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:58:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:58:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:58:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:59:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:59:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:21:59:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:00:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:00:20 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:00:40 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [01/Oct/2009:22:01:00 +0800] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"And the error log file:
[Thu Oct 1 08:42:44 2009] [notice] Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Oct 1 08:42:44 2009] [notice] Accept mutex: fcntl (Default: fcntl)
[Thu Oct 1 08:50:51 2009] [warn] [client 192.168.1.170] oc4j_socket_recvfull timed out
[Thu Oct 1 08:50:51 2009] [error] [client 192.168.1.170] [ecid: 1254357949:192.168.1.170:24084:0:3,0] mod_oc4j: request to OC4J rel12.ebiztech.biz:21500 failed: Connect failed
[Thu Oct 1 09:28:40 2009] [notice] Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Oct 1 09:28:40 2009] [notice] Accept mutex: fcntl (Default: fcntl)
[Thu Oct 1 09:29:58 2009] [error] [client 192.168.1.100] [ecid: 1254360598:192.168.1.170:27679:0:2,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:51:22 2009] [error] [client 192.168.1.101] [ecid: 1254361882:192.168.1.170:27679:0:11,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:51:26 2009] [error] [client 192.168.1.101] [ecid: 1254361886:192.168.1.170:28180:0:13,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:51:43 2009] [error] [client 192.168.1.101] [ecid: 1254361903:192.168.1.170:28256:0:17,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 09:52:55 2009] [error] [client 192.168.1.101] [ecid: 1254361975:192.168.1.170:27678:0:17,0] Directory index forbidden by rule: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/
[Thu Oct 1 11:40:43 2009] [error] [client 192.168.1.101] [ecid: 1254368443:192.168.1.170:28256:0:53,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 12:08:25 2009] [error] [client 192.168.1.101] [ecid: 1254370105:192.168.1.170:28256:0:66,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 12:08:28 2009] [error] [client 192.168.1.101] [ecid: 1254370108:192.168.1.170:27677:0:59,0] File does not exist: /u01/applr1211/VIS/inst/apps/VIS_rel12/portal/favicon.ico
[Thu Oct 1 13:05:48 2009] [error] [client 192.168.1.101] [ecid: 1254373548:192.168.1.170:28179:0:127,0] Directory index forbidden by rule: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/
[Thu Oct 1 13:06:56 2009] [error] [client 192.168.1.101] [ecid: 1254373616:192.168.1.170:28178:0:226,0] Directory index forbidden by rule: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/
[Thu Oct 1 13:06:56 2009] [error] [client 192.168.1.101] [ecid: 1254373616:192.168.1.170:28178:0:227,0] File does not exist: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
[Thu Oct 1 13:06:56 2009] [error] [client 192.168.1.101] [ecid: 1254373616:192.168.1.170:28178:0:228,0] File does not exist: /u01/applr1211/VIS/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gifThe above error normal? Its just my test instance and the users seem have no problem? or I am just not aware of.
Thanks

Weird siebel 8.0 console mode installation problem on OEL 4

Hi There,
When I tried to install Siebel 8.0 SIA build on Oracle Enterprise Linux (OEL 4), I encountered a weird problem. It is a sandbox for QA to do testing, everything is on the same machine: oracle database 10.2.0.3, gateway, siebel server and SWSE. I installed oracle database, and make sure the database connection is fine, then I did the following :
1) run install by command "./setuplinux -is:javaconsole -console", it compeleted fine.
2) go to gateway directory, source cfgenv.sh
3) run "ssincfgw -is:javaconsole -console" to do gateway server, enterprise and SWSE logical profile configuration. Gateway configuration is fine, gateway started up successfully. But during enterprise configuration, it throws out a bunch of error messages like :
Error creating Parameter:MaxEntrTasks for Comp:TxnProc in CompGroup:Remote
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:MaxEntrTasks for Comp:RepAgent in CompGroup:Remote
Strict Flag set to FALSE, continuing with the next Object...
Error creating Component:MsgBroadcastMgr in CompGroup:CommMgmt
Strict Flag set to FALSE, continuing with the next Object...
SBL-ADM-02071: Enterprise server siebel not found in gateway server
But at the end, it still shows "Execution Successful!"
The SWSE logical profile configuration went through fine
4) go to siebel server directory and source cfgenv.sh
5) launch the ssincfgw in siebsrvr/bin directory to config siebel server, it also throws a bunch of error messages like:
Error creating Parameter:AllowAnonUsers for Comp:SMObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:AllowAnonUsers for Comp:eMarketObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
Error creating Parameter:AllowAnonUsers for Comp:eEventsObjMgr_enu in CompGroup:MktgOM
Strict Flag set to FALSE, continuing with the next Object...
But again, at the end it still shows "Execution Successful!".
6) go to siebsrvr directory, source siebenv.sh
7) Launch srvrmgr in command line mode:
srvrmgr /g $GATEWAY /e $SIEBEL_ENTERPRISE /u $USERNAME /p $PASSWD
and it shows "connected to 0 server"
In the SiebSrvr.log file, it shows " SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used."
In the sw_cfg_util.log file, it shows "SBL-SVR-03005: No server connect string for Siebel Component servermgr in Siebel Enterprise siebel, Siebel Server sdc60002sems".
The weirdest part is, if I clean up and uninstall everything, run the install and configure in GUI mode, give the same parameters, I don't get any error messages and siebel server can be up and running fine.
I searched the forum and found people have reported the same error message during enterprise configuration, but says it does not affect them from bring up the siebel server. Since I'm developing an automation to do the installation, I cannot use GUI mode to install. I have to make the command line console mode work and then record the response file for silent install. Does anyone know what might cause my siebel server fail to be up and running ? Thanks a lot for any suggestions and helps.

hi,
Make sure that your network uses DNS naming.
This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
regards,
saravanan

How to connect a SunFire 280R to an HP EVA8000 San.

Hello experts,
I'm trying to connect a Sunfire 280R to an eva8000, I've installed the fibra cards and I've done a probe-scsi-all and I can see all the cards
a san :-
ok probe-scsi-all
/pci@8,600000/SUNW,qlc@4
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000004cf780993 SEAGATE ST336605FSUN36G 0438
1 1 0 21000011c62d4362 SEAGATE ST336607FSUN36G 0307
/pci@8,700000/SUNW,qlc@3
************************* Fabric Attached Devices ************************
Adapter portId - 330500
Device PortId 330100 DeviceId 0 WWPN 50001fe150061f0d
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330101 DeviceId 1 WWPN 50001fe150061f0f
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330102 DeviceId 2 WWPN 50001fe150061f09
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330103 DeviceId 3 WWPN 50001fe150061f0b
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
/pci@8,700000/scsi@6,1
/pci@8,700000/scsi@6
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009
I then downloaded the Sun StorEdge SAN Foundation Software I tried to install it but it just stops with status code 8. See output :-
./install_it
Logfile /var/tmp/install_it_Sun_StorEdge_SAN.log : restarted on Monday February 19 14:33:39 GMT 2007
This routine installs the packages and patches that
make up Sun StorEdge SAN.
Would you like to continue with the installation?
[y,n,?] y
Verifying system...
Checking for incompatiable SAN patches
xargs: Child killed with signal 13
Begin installation of SAN software
Installing StorEdge SAN packages -
Package SUNWsan : Installed Previously.
Package SUNWcfpl : Installed Previously.
Package SUNWcfplx : Installed Previously.
Package SUNWcfclr : Installed Previously.
Package SUNWcfcl : Installed Previously.
Package SUNWcfclx : Installed Previously.
Package SUNWfchbr : Installed Previously.
Package SUNWfchba : Installed Previously.
Package SUNWfchbx : Installed Previously.
Package SUNWfcsm : Installed Previously.
Package SUNWfcsmx : Installed Previously.
Package SUNWmdiu : Installed Previously.
Package SUNWjfca : Installed Previously.
Package SUNWjfcax : Installed Previously.
Package SUNWjfcau : Installed Previously.
Package SUNWjfcaux : Installed Previously.
Package SUNWemlxs : Installed Previously.
Package SUNWemlxsx : Installed Previously.
Package SUNWemlxu : Installed Previously.
Package SUNWemlxux : Installed Previously.
StorEdge SAN packages installation completed.
Begin patch installation
Patch 111847-08 : install_it: Patchadd failed with a status of 8
Could any one point me in the right direction I am new to san configuring I done it once before but it was just a case of going through a series of notes, Thanks for all your help (I will answer all question tommorrow as i' m off for the reset of the day)
Thanks

Taken from sunsolve, maybe useful for you.
Installing StorEdge SAN patches -
patch 114475-01 : Installed Successfully
patch 113767-02 : Installed Successfully
patch 113766-02 : Installed Successfully
patch 111847-07 : Installed Successfully
patch 114877-01 : install_it: Patchadd failed with a status of 8
This software failed to completly install.
It may not be safe for the system to remain in this undetermined state.
Would you like to rollback your changes ? [y,n,?]
Resolution: Top
Normally, this is the recommended action. But if the patch
that fails to install is 114877-xx or 114878-xx, then a
rollback may not be necessary.
Both 114877-xx (Solaris 8) and 114878-xx (Solaris 9) patches the following
packages: SUNWjfca, SUNWjfcax, SUNWjfcau, and SUNWjfcaux.
The packages and patches are drivers for the JNI 2GB PCI Single FC Network
Adapter and JNI 2GB PCI Dual FC Network Adapter fibre-channel that have
Sun StorEdge SAN 4.x Foundation Suite compatible FCODE.
If server does not have this type of host bus adapter, then SUNWjfca,
SUNWjfcax, SUNWjfcau, and SUNWjfcaux packages are not installed on
the system. The patch will fail to install causing install_it script
to prompt for a rollback.
For this specific situation, it is okay to respond no to the rollback
and let install_it script proceed to completion as the patch is not
required.
Would you like to rollback your changes ? [y,n,?] n
regards

Error 4450 when trying to burn a cd

Please help me to fix this issue. I have the latest version of iTunes, and my burner is working correctly, and I am using blank discs.
I purchased $20 of music and made a playlist to burn, it checks, initializes and begins burn, then alerts me that it is being cancelled and gives me this error "the attempt to burn a disc failed, unknown error 4450"
I have the preference set to audio cd, checked my burner and discs, it all works. I tried restarting computer. Logging off and back on to iTunes, updated iTunes, repaired iTunes, removed iTunes, installed older version 7.1 but then it couldn't read my library, so reinstalled 7.6 and still not able to burn
Please help?!

OK, I feel like an idiot.
I tried all the suggestions, from lowering burn speed, running diagnostics, etc etc.
After contacting Apple and complaining about the service and inability to burn a CD of music I purchased, I finally opened my drive, and looked at the lens, it had a thin residue all over the entire lens and disc holding area, I simply wiped it off gently with a soft cloth, and voila!
I can burn now!

I keep getting error code 4450 when I'm trying to burn a CD from itunes. It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?

I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

How to set up DNS on OEL ?

Hello buddy:
How can I set up DNS on OEL ? Just for install 11g R2 RAC

You can use "system-config-network" command to configure your DNS configuration.

Telnet session not working in OEL -5

Telnet session not working in OEL -5
==============================
1. Installed xinetd and telnet-server packages on the box.
2. Enabled the xinetd service.
# service xinetd start
# chkconfig xinetd on
Telnet still not working. Please help.
Lily.

Re-ran the /etc/init.d/xinetd restart command. Telnet cannot connect and this is what I get:
Unencrypted connection refused. Goodbye.
Below is the telnet.cfg
==================
# default: on
# description: The telnet server serves telnet sessions; it uses \
#     unencrypted username/password pairs for authentication.
service telnet
     flags          = REUSE
     socket_type     = stream
     wait          = no
     user          = root
     server          = /usr/sbin/in.telnetd
     log_on_failure     += USERID
     disable          = no
===================

Why is there a 4450 error message coming up and i can't burn cds???

I will try to burn a playlist to disk, but when i start to burn a CD, it stops in the middle and says something about a 4450 error. I've been through several blank CDs and have tried to fix it by doing all the steps iTunes recommended, but nothing's working. What do i do?
Toshiba Satellite M45-S355 (is this what it means by model?) Windows XP

I am also receiving the error code 4450 message each time that I try to burn a CD. If anyone has suggestions, please let me know.
Dell Dimension 8400 Windows XP Pro

How do I find the number of physical CPUs , number of cores in OEL ?

In RHEL , it is easy to find the number of Physical CPUs and the number of cores within each CPU
-- Ouput from Red Hat Enterprise Linux 5.4
-- This a real machine. Not a VM
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 46
model name      : Intel(R) Xeon(R) CPU           X7550 @ 2.00GHz
stepping        : 6
cpu MHz         : 1995.048
cache size      : 18432 KB
physical id     : 0              --------------> This will give info on the physical CPU
siblings        : 8
core id         : 0
cpu cores       : 8              --------------> This will give the number of cores within a CPU
apicid          : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm
bogomips        : 3990.09
clflush size    : 64
cache_alignment : 64
address sizes   : 44 bits physical, 48 bits virtual
power management: [8]Output from Oracle Linux . Physical CPU Id and Number of Cores info is missing.
-- Output from Oracle Enterprise Linux 6.3
-- This is a virtual machine created using Virtual Box
-- Processor ID , number of cores is missing
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 42
model name      : Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
stepping        : 7
cpu MHz         : 2298.627
cache size      : 6144 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp lm constant_tsc up rep_good nopl pni monitor ssse3 lahf_lm
bogomips        : 4597.25
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:Is this the expected output in Oracle Enterprise Linux ? If so, how can I find the number of Physical CPUs and the number of cores within a Physical CPU in OEL?
Is this info missing because I am running OEL in a virtual machine ?

Oracle Linux behaves exactly like Red Hat in this matter an /proc/cpuinfo can be used for that. I guess this is because you have set up VirtualBox to only assign one virtual CPU to your guest Linux.
processor     : 0
vendor_id     : AuthenticAMD
cpu family     : 15
model          : 33
model name     : Dual Core AMD Opteron(tm) Processor 275
stepping     : 2
cpu MHz          : 1000.000
cache size     : 1024 KB
physical id     : 0
siblings     : 2
core id          : 0
cpu cores     : 2
apicid          : 0
initial apicid     : 0
fpu          : yes
fpu_exception     : yes
cpuid level     : 1
wp          : yes
flags          : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good extd_apicid pni lahf_lm cmp_legacy
bogomips     : 1994.47
TLB size     : 1024 4K pages
clflush size     : 64
cache_alignment     : 64
address sizes     : 40 bits physical, 48 bits virtual
power management: ts fid vid ttpAnother example is this one, OEL 5.6 inside of VirtualBox but with 2 virtual CPUs assigned:
[root@oel56proxy ~]# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 23
model name      : Intel(R) Core(TM)2 Duo CPU     P8600 @ 2.40GHz
stepping        : 10
cpu MHz         : 2064.652
cache size      : 6144 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
bogomips        : 4129.30
processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 23
model name      : Intel(R) Core(TM)2 Duo CPU     P8600 @ 2.40GHz
stepping        : 10
cpu MHz         : 2064.652
cache size      : 6144 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
apicid          : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx lm constant_tsc pni ssse3 lahf_lm
bogomips        : 7494.15I have not tried to replicate this with a VM that only has one vCPU assigned but I guess that is why you only see one CPU and no processor_id and so on.
Bjoern

Help error while booting sunfire v440 (error)

Hi solaris admins.
i am getting the following error while trying to install the solaris 10 OS on a sunfire v440 server.Please can someone help me out here.i think the problem is with the Hard Drives or something.
=================================================
Sun Fire V440, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
=======================================================
Hardware watchdog enabled
Configuring devices.
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1f,700000/scsi@2/sd@2,0 (sd4):
Corrupt label; wrong magic number
========================================================
internal error: Bad file number
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: ex
it status 134
====================================================
Plese and advice and ideas are highly appreciated.
We Brain server.
Regards
Noa Junior Sys Admin

No clue why it's doing that when you're booting off
the CD though... I didn't think it checked. Hmmm.
boot cdrom will try and start the installer - not sure what happens if no valid disk label.
I do recall going through this (or something similar)
when the HD in my Blade 150 failed and I swapped in a
new one. I just formatted the drive, then I was
fine. Not sure HOW I formatted it though. Never
bothered to write it down, it seemed obvious at the
time :-(Could first try boot cdrom -s to just get a single user shell, and then run format just to create the disk labels.
If manually running format successfully labels the disks, then try running the installer (which should give the option of how to partition the disks).

The attempt to burn a disc failed. An unknown error occurred (4450)

Since I upgraded to iTunes 7.5, I can no longer burn CDs using this or any other burn app. It progresses 25-40% and then returns a 4450 error. I have tried slowing the burn rate down and the error still comes into play after a couple of songs. The diagnotics from Apple and Dell state the drive is working fine.

I get the same message but the number is 4000. Ever since I upgraded to iTunes 7.5 I have been unable to burn CDs. Do you have a solution yet?

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

OEL 5.5 on SunFire 4450?

Similar Messages

Maybe you are looking for