OEM 10g Agent
Hi,
I am running 3 apps in one server & 3 db's in another server.
Do I need 3 X 3 separate OEM 10g agent software to be installed on both server or 1 installation of agent home is enough to monitor these 3 dbs in single server?
If one agent is need to monitor all the 3 dbs then how to configure the single agent for all the 3 dbs & apps.
Regards,
Indraneel
Agent performs server level monitoring, so you don't need to install multiple agents to monitor multiple DBs on a single server.
how to configure the single agent for all the 3 dbs & apps.If you know how to configure for a single database, then this should not be a problem. Please refer documentation for this.
Regards,
S.K.
Similar Messages
-
I have installed OEM 10G grid control and the OEM 10G agents on a number of Sun/SOLARIS servers. I would like to access the diagnostics and tuning pack for OEM 10G and don't know how to do it. I read some other messages posted on this forum and it sounds like both packs are NOT automatically installed as part of the OEM 10G install. Are they installed and I just need to have license keys to enable them or are they indeed separate products that need installed and if so where do I find them?
Thanks
Randy GarverickNo such thing. Its all installed under OEM Grid Control.
First time you run the product you get warnings not to use stuff that you are not licensed for.
You may be confusing the OEM Database Control that gets installed with 10g DB .. it isnt the same oa OEM Grid Control. -
OEM 10G can manage databases oracle 8.1.7 / AIX 4.3.3
I'm installing OEM 10G on my desktop (windows 2000)
i'm cannot add hotes or cibles, oem 10g said "installing oracle management on computer hote" and my databases are oracle 8.1.7 platform aix 4.3.3 .
How do for managed databases ?
ThanksYou need to install the remote agents on each of your database servers. Once you do that it auto discovers back to the oem console. -- be sure you are using oem grid control and not oem db control
-
Installing OEM 10g (10.2.0.1) Grid Control on Linux86
Hi friends,
I have successfully installed OEM Grid in our RHEL 4.6 server (1st time).
At the end of the installation I got this message:
See below for information pertaining to your Enterprise Manager installation:
1. Use the following URL to access the Enterprise Manager Grid Control:
http://server01.ebiztech.biz:4889/em
2. The Enterprise Manager installation includes an Oracle Application Server instance, which is administered using a special "ias_admin" user account. The following information was defaulted for the embedded Application Server instance:
Instance Name: EnterpriseManager0.server01.ebiztech.biz
ias_admin password: This password is the same the SYSMAN account.
3. The connection details for the Enterprise Manager Repository are:
Host: server01.ebiztech.biz
Port: 1521
SID: emrepI can do #1, and #3.
How do I access #2? what is the URL corresponding to it? Or is it done through SQLPlus?
Thanks a lot,
Ms KThanks Raj,
Of course I will upgrade it, but for now I am still cramming on how to complete my installation huhuhhu:(
Firstly....
How do you install management agent for linux86?
I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1.
Do I need to install a "management agent" on this server, to be able to manage my EBS R12.1?
Secondly....
I want to manage our EBS 11i which resides on another server (remote).
I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN,
and put it to the target server.
I unzip it following the readme.txt to the
1. Download the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN.
2. Copy the downloaded file to <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory.(create <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory, if it doesn't exist.)
3. cd <OMS_HOME>/sysman/agent_download/10.2.0.2.0
4. <OMS_HOME>/bin/unzip Linux_Grid_Control_agent_download_10_2_0_2_0.zip
5. If agent_download.rsp doesn't exists at <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory then:
a. mv agent_download.rsp.bak agent_download.rsp
b. edit agent_download.rsp and modify s_OMSHost="%s_hostname%" and s_OMSPort="%s_OMSPort%" with the correct OMSHost and OMSPort values.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
eg. s_OMSHost="stadv26.us.oracle.com"
s_OMSPort="4889"
6. Edit <OMS_HOME>/sysman/agent_download/10.2.0.2.0/linux/agentDownload.linux and modify OMShost=%s_OMSHost% and httpPort=%s_OMSPort% with the correct OMSHost and OMSPort.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
For eg. OMShost =stadv26.us.oracle.com
httpPort=4889
7. Follow the agentDownload instructions from 5.4 section of Oracle Enterprise Manager Installation and Basic Configuration Guide.But when I got to #7 ....the documentation is not clear, as usual there are lots of injected unrelated topics which make the documentation "topsiturvy" and very hard to follow.
Can you just tell me, based on your experience how to install the agent? Someone told me to run OUI?
But I can not find it on the unzip >Linux_Grid_Control_agent_download_10_2_0_2_0.zip file
Thanks a lot. -
OEM 10g (10.2.0.1) Grid Control for Linux86 part 2
Hi hussein/helios,
Firstly....
How do you install management agent for linux86?
I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1.
Do I need to install a "management agent" on this server, to be able to manage my EBS R12.1?
Secondly....
I want to manage our EBS 11i which resides on another server (remote).
I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN,
and put it to the target server.
I unzip it following the readme.txt to the
1. Download the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN.
2. Copy the downloaded file to <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory.(create <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory, if it doesn't exist.)
3. cd <OMS_HOME>/sysman/agent_download/10.2.0.2.0
4. <OMS_HOME>/bin/unzip Linux_Grid_Control_agent_download_10_2_0_2_0.zip
5. If agent_download.rsp doesn't exists at <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory then:
a. mv agent_download.rsp.bak agent_download.rsp
b. edit agent_download.rsp and modify s_OMSHost="%s_hostname%" and s_OMSPort="%s_OMSPort%" with the correct OMSHost and OMSPort values.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
eg. s_OMSHost="stadv26.us.oracle.com"
s_OMSPort="4889"
6. Edit <OMS_HOME>/sysman/agent_download/10.2.0.2.0/linux/agentDownload.linux and modify OMShost=%s_OMSHost% and httpPort=%s_OMSPort% with the correct OMSHost and OMSPort.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
For eg. OMShost =stadv26.us.oracle.com
httpPort=4889
7. Follow the agentDownload instructions from 5.4 section of Oracle Enterprise Manager Installation and Basic Configuration Guide.But when I got to #7 ....the documentation is not clear, as usual there are lots of injected unrelated topics which make the documentation "topsiturvy" and very hard to follow.
Can you just tell me, based on your experience how to install the agent? Someone told me to run OUI?
But I can not find it on the unzip >Linux_Grid_Control_agent_download_10_2_0_2_0.zip file
Thanks a lot.
Ms Khi dear,
I want to upgrade my OMS server 10.2.0.1 to 10.2.0.5
I downloaded the patch 10.2.0.5 and read the README.txt
Part of the README is:
1.2 Enter the following command to extract the installation files:
$ unzip GridControl_10.2.0.5_<platform name>.zip
This command extracts the following files and directory:
|- p3731593_10205_<platform name>.zip
|- 3731596.zip
|- 3822442.zip
|- README.txt
|- doc/
NOTE: <platform name> will be "LINUX" or "Win32" depending on the platform for which you are installing. For installing Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), refer to the Release Notes available in the "doc" directory.
- p3731593_10205_<platform name>.zip is the ZIP file that contains 10.2.0.5 patch set software.
This zip can be used for:
- Upgrading Oracle Management Service Release 2 (10.2.0.x) or higher to Oracle Management Service Release 5 (10.2.0.5)
- Upgrading Oracle Management Repository (sysman schema)
- Upgrading Oracle Management Agent on the host where OMS is running.
NOTE: This will not upgrade the database in which the Management Repository (sysman schema) resides.
- 3731596.zip is for patching Management Agent by staging the patch set. To understand how you can apply the Management Agent 10.2.0.5 patch set, refer to method 2 described in section 4.3.3 "Upgrading Management Agent - Multiple Hosts at a Time" of the Release Notes. The Release Notes can be found in the "doc" directory.
- 3822442.zip is for patching Management Agent by distributing the full patch set. To understand how to apply the Management Agent 10.2.0.5 patch set, refer to method 1 described in section 4.3.3 "Upgrading Management Agent - Multiple Hosts at a Time" of the Release Notes. The Release Notes can be found in the "doc" directory.3731596.zip - by staging
3822442.zip - by distributing
Does the two above have the same function or purpose?
I can not understand the meaning of the two :( . which do you think is the right one for my setup?
Thanks a lot -
hi,
I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1.
I want to manage our EBS 11i which resides on another server
I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN,
and put it to the target server and unzip it.
Then I runInstaller and choose add management server.
I followed this link for the agent install>
http://www.idevelopment.info/data/Oracle/DBA_tips/Enterprise_Manager/OEM_12.shtml#Install%20Management%20Agent%20%2810.2.0.5%29
But I got stuck up on the Screen Page for entry of
Management Service Host Name > server01.abc.com
Management Service Port > 4889I got error : The connection can not be established to Oracle Configuration Manager
Reason > Error connecting to server peer not authenticated
But in the server linux fire fox browser, I can access it using > http://server01.abc.com:4889/em
I can not understand why this simple thing to follow just stuck with this
Oracle Configuration Manager > There is a "Test Connection" button there.
And it will not pass over it. How do I test connection from the OS command prompt? What command does this
screen use to validate connection to the OMS server?
Did I miss someting ? a pre-requisite perhaps that is needed by this connection?
What do you mean by "peer authentication"?
Please help....
Thanks a lot,
Ms KHi;
Please check below and compare your steps wiht doc
Oracle Universal Installer please refer to section 3.3.4 of the the Enterprise Manager Grid Control Basic Installation and Configuration Guide available at:
http://www.oracle.com/technology/documentation/oem.html
Regard
Helios -
How can change database one to another in OEM 10g
hello
i have oracle 10g db 10.1.0.2.0 R2.
and 2 db 1. oracle(db_name) approx 5GB 2. oracle1(db_name) approx 2GB
now i am using OEM 10g or db managing.and manage oracle db through OEM.
but i want manage oracle1 db through OEM so what should i do..
plz. give me reply
very soon...
thanx.If I understand your question correctly, you have one database that's showing in OEM you say. You didn't specify if it's Database Control or Grid Control.
Database Control allows u to manage only 1 database. So using Database Control of db1, you can manage db1. Using database control of db2, you can manage db2.
However if you want to manage both from one server, you can use Grid Control. To make the second node that hosts the second database show up in Grid Control, you need to install the management agent on that node. After that, once you set up the preferred credentials, it will be in GC. -
Oracle 9i and 10g Agents on one server
Hello,
What are the conflicts if I installed 10g agent on the server that 9i agent already occupy. I want to use 9i and 10g OEM. Thank you in advance.I dont believe you will have any issues. They are very different. The 10g agent goes in its own home and has its own binaries running against the db.
-
Hi,
We installed the OEM 10g Grid Control in Serparate Host..
Installed 10.2.0.1 grid control
and patched upto 10.2.0.3 for OMS....
here OMS version is 10.2.0.3
grid Control Agent Version is 10.2.0.3
and Repository Home is 10.2.0.1
Installed the linux Grid control agent 10.2.0.3 in target database...installation was successfull....but Target database is not showing in the grid control ..what was the problem...where to check the log files in target database host..do u mean that...
i installed agent on target database home in a seperate directory...
ORACLE_HOME is the Target Database Oracle Home
cd $ORACLE_HOME/agent10g/sysman/log/
is it the correct directory to check the log files..i am new to this grid control...
=========================================================
$cat emagent.trc
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:08 Thread-5980167 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:18 Thread-65541 ERROR command: nmejcn: received no status header from repository at http://gridserver.abc.com:4889/em/upload/
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:42 Thread-6406151 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
================================================
$ cat emctl.log
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: Processing start agent
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: EMHOME is /u02/targetdb/10.2.0/agent10g
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm:status agent returned with retCode=1
15709 :: Sun Aug 19 11:42:36 2007::AgentLifeCycle.pm: Exited loop with retCode=3
16405 :: Sun Aug 19 11:48:23 2007::AgentLifeCycle.pm: Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:emdctl status returned 3
19862 :: Sun Aug 19 12:02:42 2007::AgentLifeCycle.pm: Processing status agent
19862 :: Sun Aug 19 12:02:42 2007::AgentStatus.pm:Processing status agent
19862 :: Sun Aug 19 12:02:43 2007::AgentStatus.pm:emdctl status returned 3
20326 :: Sun Aug 19 12:04:05 2007::AgentLifeCycle.pm: Processing status agent
20326 :: Sun Aug 19 12:04:05 2007::AgentStatus.pm:Processing status agent
20326 :: Sun Aug 19 12:04:06 2007::AgentStatus.pm:emdctl status returned 3
20404 :: Sun Aug 19 12:05:41 2007::AgentLifeCycle.pm: Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:emdctl status returned 3
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:Processing upload
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:emdctl status agent returned 3
21329 :: Sun Aug 19 12:16:38 2007::AgentStatus.pm: emdctl upload returned with exit code 6
21685 :: Sun Aug 19 12:22:59 2007::AgentLifeCycle.pm: Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:emdctl status returned 3
22464 :: Sun Aug 19 12:40:17 2007::AgentLifeCycle.pm: Processing status agent
22464 :: Sun Aug 19 12:40:17 2007::AgentStatus.pm:Processing status agent
22464 :: Sun Aug 19 12:40:18 2007::AgentStatus.pm:emdctl status returned 3 -
OEM 10g with earlier version of db
Hi,
is it possible to manage all my databases ( version 10g, 9i, 8i ) with only one installed OEM 10g?
Thank you.
TiborI'm running a 10gR1 oem on windows with 9.2.0.6 (now upgraded to 9.2.0.7) and 8.1.7.4 instances.
As long as the 10g agent runs on the host OS it will mamage the instances - even 32-bit 8i on Solaris-32 and Windows, althout Solaris-32 has been dropped from 10gR2
if you want to run 10gR2 oem then 9i must be 9.2.0.7 (hence why I upgraded - we're building a new 10gR2 oem server) -
We want to install the EMGC 10g agents on different platforms.
Are EMGC 10g release 3 agents compatable an installable on these platforms?:
AIX 5.2
AIX 5.3
Netware 5.1
Solaris 8
Windows 2000 Server
Windows 2003 Server
Windows 2000 Professional
Regards,
Tim AbdoelhafiezkhanHave you checked the OEM Downloads page?
For specific os, hardware and versions info, you should visit Certify within Metalink to find out whether your configurations are "ok" or not. (the OTN Certify backdoor does not go all the way for GC, the new "Grid Control Certification Checker" app still needs a valid login)
You may also find certification information in the 10.2 GC docu library, from the Installation and Basic Configuration book.
The platforms you are after might be supported, but you need to check, depending on the hardware (e.g. x86 or x64, SPARC or x86). However, Netware was "dropped" as one of the major supported platforms long ago. Even Novell suggests migration to SLES, which is supported for the 10.2.0.x Management Agent.
Message was edited by:
orafad -
My 10G OEM console/repository is recognizing nodes with 9i databases (w/ 10G agents installed)... but not nodes with 10G databases (10.1.0.2) installed. Emctl start agent has been run on both, oratab files and listeners appear correct, no firewalls in place. Any quick suggestions/pointers before I start troubleshooting
agent discovery would be appreciated!Check, if DBSNMP account is locked, we had have exactly this problem.
-
My portlist.ini file has the following entries
$ cat portlist.ini
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (CSI01DRW) = 5500
Enterprise Manager Agent Port (CSI01DRW) = 1830
Enterprise Manager Console HTTP Port (CSI01DRW) = 5500
Enterprise Manager Agent Port (CSI01DRW) = 1830
but I am not able to access my OEM 10g console from the web browser.
My OS is SunOS 5.10
Does any one have any solutions for this problem.Check to make sure if dbconsole is running
emctl status dbconsole -
I'm running 8.0.5 on Red Hat 6.0. The system has been running happily for two months, but I'm now starting to play with the management tools and having a problem.
When I start the OEM intelligent agent via
"lsnctrl dbsnmp_start"
I get the following error message in DBSNMPW.log:
NMS-00315: Message 315 not found; No message file for product=network, facility=
NMS
From OEM Doc I found the following:
NMS-00315: Failed to create tcl package index.
Cause: The tcl package index could not be created.
Action: Make sure all the shared libraries in the $ORACLE_HOME/network/agent/library directory are correct.
I checked the $ORACLE_HOME/network/agent/library and found it was empty.
I then started orainst and checked to see that OEM intelligent agent was installed, it shows as being installed
Has anyone run into this problem? Does anyone have a solution?
Thankshello,
I have a problem with the installation of a agent in OEM on linux (Fedora).
this error has occur :
Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - Production
SQL> SQL> SQL> WEBSITE Creation FAILED = EM Website ERR:Host not found
CREATE DEFAULT WEBSITE FAILED : ORA-20998: Host not found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-20998: Host not found
ORA-06512: at line 234
Disconnected from Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - ProductionWebsite target creation script failed.
Apr 19, 2004 11:26:04 AM oracle.agent.ConfigureAgent startAgentService
INFO: Starting the agent...
Starting the agent...TZ set to Europe/ParisOracle Enterprise Manager 10g Release 10.1.0.2.0.
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.Starting agent .................... failed.
Apr 19, 2004 11:26:38 AM oracle.agent.ConfigureAgent startAgentService
INFO: Started agent Successfully
Started agent Successfully
The Management Agent Configuration Assistant has failed. The following failures were recorded:
Enterprise Manager Website target configuration failed.
Agent Service Failed to start.
Exit status: 1
Configuration assistant "Agent Configuration Assistant" failed
Can you help me please to resolve this problem.
ps:
OEM is succesfully installed in my computer. -
Configuration Assistant failed during OEM 10g Grid control installation
Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha
Maybe you are looking for
-
Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?
-
I get an error message on my imac when trying to create home sharing.
I am trying to copy my contacts from my iMac to my iphone 4s using iTunes Home sharing. I get an error message stating that Home sharing could not be activated because an error occurred (5506) What does this mean? Am I using the correct application t
-
I currently have a 17" MBP, but am looking for a second laptop for travel purposes. It'll mostly be used for e-mail, internet, storing photos (iPhoto), and playing music (iTunes). I'm trying to decide between the 13" MacBook and a MacBook Air. I'd pr
-
Hi, I have a series of images that I want to load from the top down. My page has a 3 column table with a menu, a long series of images, and a shorter series of images. Link---> L=Travel-Tees.com]http://travel-tees.com/index.htm[/L] I'd like the page
-
Getting navigational state in a new template
Hi everyone, we are creatign a "cleaner" print specific template that will open up in a new window. But we need to pass on the user selections and navigation. This the scenario: -User opens normal template and navigates table + makes selections. -Whe