OEM 10G discovery on solaris

My 10G OEM console/repository is recognizing nodes with 9i databases (w/ 10G agents installed)... but not nodes with 10G databases (10.1.0.2) installed. Emctl start agent has been run on both, oratab files and listeners appear correct, no firewalls in place. Any quick suggestions/pointers before I start troubleshooting
agent discovery would be appreciated!

Check, if DBSNMP account is locked, we had have exactly this problem.

Similar Messages

Installing OEM Grid Control on Solaris Sparc using an existing database

During installing OEM 10g on Solaris, after select "using an existing database" the connect string for database (host:port:sid) never is solicited and the path for datafiles neither, then the installation cancel.
On Windows, this type of installation in the same version work fine!
1_ How I do to install OEM 10g on Solaris using an existing db?
Tx,
Diego.

Have you installed the Management Agent for the target database?

Creating Standby database in OEM 10g

DB = Oracle 10.2.0.4
OS = Solaris 10 Sparc
I am trying to create a physical standby database using the add standby database option within OEM 10g. This is something we have done numerous times before on 10g and 11g db's without a single issue, but for some reason, this time after selecting my RMAN backup location and staging area location , I am getting the following error when I click Next:
RMAN Backup Location - The specified RMAN backup is invalid. Could not identify controlfile from the backup
It is the latest backup (using RMAN catalog) from the previous evening and includes datafiles and control file.
Here is the output for List backup:
BS Key Size Device Type Elapsed Time Completion Time
1741586 7.70G DISK 00:03:26 06-DEC-12
BP Key: 1741590 Status: AVAILABLE Compressed: NO Tag: TAG20121206T220033
Piece Name: /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4811_1.bus
List of Archived Logs in backup set 1741586
Thrd Seq Low SCN Low Time Next SCN Next Time
1 20013 7974703107 04-DEC-12 7974865046 04-DEC-12
1 20014 7974865046 04-DEC-12 7975209322 05-DEC-12
1 20015 7975209322 05-DEC-12 7975792781 05-DEC-12
1 20016 7975792781 05-DEC-12 7975841363 05-DEC-12
1 20017 7975841363 05-DEC-12 7976016507 05-DEC-12
1 20018 7976016507 05-DEC-12 7976577946 06-DEC-12
1 20019 7976577946 06-DEC-12 7976685352 06-DEC-12
1 20020 7976685352 06-DEC-12 7976816259 06-DEC-12
1 20021 7976816259 06-DEC-12 7976884597 06-DEC-12
1 20022 7976884597 06-DEC-12 7977236969 06-DEC-12
1 20023 7977236969 06-DEC-12 7978009499 06-DEC-12
1 20024 7978009499 06-DEC-12 7978784609 06-DEC-12
1 20025 7978784609 06-DEC-12 7979558556 06-DEC-12
1 20026 7979558556 06-DEC-12 7980614921 06-DEC-12
1 20027 7980614921 06-DEC-12 7981238045 06-DEC-12
1 20028 7981238045 06-DEC-12 7981890156 06-DEC-12
1 20029 7981890156 06-DEC-12 7982119933 06-DEC-12
1 20030 7982119933 06-DEC-12 7982775834 06-DEC-12
1 20031 7982775834 06-DEC-12 7983388279 06-DEC-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
1741587 Full 214.09G DISK 01:15:15 06-DEC-12
List of Datafiles in backup set 1741587
File LV Type Ckp SCN Ckp Time Name
1 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/system01.dbf
2 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/undotbs01.dbf
3 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/sysaux01.dbf
4 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/large_indexes01.dbf
5 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/large_indexes02.dbf
6 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/large_indexes03.dbf
7 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/large_tables01.dbf
8 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/large_tables02.dbf
9 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/large_tables03.dbf
10 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/small_tables01.dbf
11 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/small_tables02.dbf
12 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/small_tables03.dbf
13 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/small_tables04.dbf
14 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/medium_tables01.dbf
15 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/medium_tables02.dbf
16 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/medium_tables03.dbf
17 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/small_indexes01.dbf
18 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/medium_indexes01.dbf
19 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/tools01.dbf
20 Full 7983402310 06-DEC-12 /oracle/oradata/care/carelive/data/small_indexes02.dbf
Backup Set Copy #1 of backup set 1741587
Device Type Elapsed Time Completion Time Compressed Tag
DISK 01:15:15 06-DEC-12 NO TAG20121206T220415
List of Backup Pieces for backup set 1741587 Copy #1
BP Key Pc# Status Piece Name
1741591 1 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_1.bus
1741592 2 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_2.bus
1741593 3 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_3.bus
1741594 4 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_4.bus
1741595 5 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_5.bus
1741596 6 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_6.bus
1741597 7 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_7.bus
1741598 8 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_8.bus
1741599 9 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_9.bus
1741600 10 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_10.bus
1741601 11 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_11.bus
1741602 12 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_12.bus
1741603 13 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_13.bus
1741604 14 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_14.bus
1741605 15 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_15.bus
1741606 16 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_16.bus
1741607 17 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_17.bus
1741608 18 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_18.bus
1741609 19 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_19.bus
1741610 20 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_20.bus
1741611 21 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_21.bus
1741612 22 AVAILABLE /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4812_22.bus
BS Key Size Device Type Elapsed Time Completion Time
1741658 104.19M DISK 00:00:04 06-DEC-12
BP Key: 1741679 Status: AVAILABLE Compressed: NO Tag: TAG20121206T231939
Piece Name: /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4813_1.bus
List of Archived Logs in backup set 1741658
Thrd Seq Low SCN Low Time Next SCN Next Time
1 20032 7983388279 06-DEC-12 7983637536 06-DEC-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
1741702 Full 7.33M DISK 00:00:02 06-DEC-12
BP Key: 1741704 Status: AVAILABLE Compressed: NO Tag: TAG20121206T231950
Piece Name: /carebackup/oradata/CARELIVE/carelive/backup/ctlc-3640364239-20121206-00
Control File Included: Ckp SCN: 7983638867 Ckp time: 06-DEC-12
SPFILE Included: Modification time: 06-DEC-12
The only difference between creating a standby for this db and others we have created is that the file system the backups are stored on is on a non-global zone shared via nfs mount.
I know that when I try and share that filesystem with other servers I get the message:
share_nfs: Cannot share filesystems in non-global zones
If the /backup filesystem is not shared with any other servers would OEM be able to read from that NGZ? The filesystem is available to connect to using ssh from other locations, but not sure how OEM handles this part of the process.
Any advice would be great.
Regards,
JP

Thanks for the reply. I thought that is what I would need to do. However this link is very useful and could resolve the issue. I have yet to raise it with the system admin guys here yet but will do and will report back on outcome.
http://faizsulaiman.com/mount-nfs-solaris-non-global-zone/

OEM 10G add-on packs

I have installed OEM 10G grid control and the OEM 10G agents on a number of Sun/SOLARIS servers. I would like to access the diagnostics and tuning pack for OEM 10G and don't know how to do it. I read some other messages posted on this forum and it sounds like both packs are NOT automatically installed as part of the OEM 10G install. Are they installed and I just need to have license keys to enable them or are they indeed separate products that need installed and if so where do I find them?
Thanks
Randy Garverick

No such thing. Its all installed under OEM Grid Control.
First time you run the product you get warnings not to use stuff that you are not licensed for.
You may be confusing the OEM Database Control that gets installed with 10g DB .. it isnt the same oa OEM Grid Control.

OEM 10g with earlier version of db

Hi,
is it possible to manage all my databases ( version 10g, 9i, 8i ) with only one installed OEM 10g?
Thank you.
Tibor

I'm running a 10gR1 oem on windows with 9.2.0.6 (now upgraded to 9.2.0.7) and 8.1.7.4 instances.
As long as the 10g agent runs on the host OS it will mamage the instances - even 32-bit 8i on Solaris-32 and Windows, althout Solaris-32 has been dropped from 10gR2
if you want to run 10gR2 oem then 9i must be 9.2.0.7 (hence why I upgraded - we're building a new 10gR2 oem server)

OEM 10G can manage databases oracle 8.1.7 / AIX 4.3.3

I'm installing OEM 10G on my desktop (windows 2000)
i'm cannot add hotes or cibles, oem 10g said "installing oracle management on computer hote" and my databases are oracle 8.1.7 platform aix 4.3.3 .
How do for managed databases ?
Thanks

You need to install the remote agents on each of your database servers. Once you do that it auto discovers back to the oem console. -- be sure you are using oem grid control and not oem db control

Installing OEM 10g (10.2.0.1) Grid Control on Linux86

Hi friends,
I have successfully installed OEM Grid in our RHEL 4.6 server (1st time).
At the end of the installation I got this message:
See below for information pertaining to your Enterprise Manager installation:
1. Use the following URL to access the Enterprise Manager Grid Control:
http://server01.ebiztech.biz:4889/em
2. The Enterprise Manager installation includes an Oracle Application Server instance, which is administered using a special "ias_admin" user account. The following information was defaulted for the embedded Application Server instance:
Instance Name:    EnterpriseManager0.server01.ebiztech.biz
ias_admin password: This password is the same the SYSMAN account.
3. The connection details for the Enterprise Manager Repository are:
Host: server01.ebiztech.biz
Port: 1521
SID: emrepI can do #1, and #3.
How do I access #2? what is the URL corresponding to it? Or is it done through SQLPlus?
Thanks a lot,
Ms K

Thanks Raj,
Of course I will upgrade it, but for now I am still cramming on how to complete my installation huhuhhu:(
Firstly....
How do you install management agent for linux86?
I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1.
Do I need to install a "management agent" on this server, to be able to manage my EBS R12.1?
Secondly....
I want to manage our EBS 11i which resides on another server (remote).
I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN,
and put it to the target server.
I unzip it following the readme.txt to the
1. Download the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN.
2. Copy the downloaded file to <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory.(create <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory, if it doesn't exist.)
3. cd <OMS_HOME>/sysman/agent_download/10.2.0.2.0
4. <OMS_HOME>/bin/unzip Linux_Grid_Control_agent_download_10_2_0_2_0.zip
5. If agent_download.rsp doesn't exists at <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory then:
    a. mv agent_download.rsp.bak agent_download.rsp
    b. edit agent_download.rsp and modify s_OMSHost="%s_hostname%" and s_OMSPort="%s_OMSPort%" with the correct OMSHost and OMSPort values.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
        eg. s_OMSHost="stadv26.us.oracle.com"
            s_OMSPort="4889"
6. Edit <OMS_HOME>/sysman/agent_download/10.2.0.2.0/linux/agentDownload.linux and modify OMShost=%s_OMSHost% and httpPort=%s_OMSPort% with the correct OMSHost and OMSPort.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
   For eg. OMShost =stadv26.us.oracle.com
           httpPort=4889
7. Follow the agentDownload instructions from 5.4 section of Oracle Enterprise Manager Installation and Basic Configuration Guide.But when I got to #7 ....the documentation is not clear, as usual there are lots of injected unrelated topics which make the documentation "topsiturvy" and very hard to follow.
Can you just tell me, based on your experience how to install the agent? Someone told me to run OUI?
But I can not find it on the unzip >Linux_Grid_Control_agent_download_10_2_0_2_0.zip file
Thanks a lot.

OEM 10g (10.2.0.1) Grid Control for Linux86 part 2

Hi hussein/helios,
Firstly....
How do you install management agent for linux86?
I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1.
Do I need to install a "management agent" on this server, to be able to manage my EBS R12.1?
Secondly....
I want to manage our EBS 11i which resides on another server (remote).
I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN,
and put it to the target server.
I unzip it following the readme.txt to the
1. Download the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN.
2. Copy the downloaded file to <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory.(create <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory, if it doesn't exist.)
3. cd <OMS_HOME>/sysman/agent_download/10.2.0.2.0
4. <OMS_HOME>/bin/unzip Linux_Grid_Control_agent_download_10_2_0_2_0.zip
5. If agent_download.rsp doesn't exists at <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory then:
    a. mv agent_download.rsp.bak agent_download.rsp
    b. edit agent_download.rsp and modify s_OMSHost="%s_hostname%" and s_OMSPort="%s_OMSPort%" with the correct OMSHost and OMSPort values.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
        eg. s_OMSHost="stadv26.us.oracle.com"
            s_OMSPort="4889"
6. Edit <OMS_HOME>/sysman/agent_download/10.2.0.2.0/linux/agentDownload.linux and modify OMShost=%s_OMSHost% and httpPort=%s_OMSPort% with the correct OMSHost and OMSPort.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
   For eg. OMShost =stadv26.us.oracle.com
           httpPort=4889
7. Follow the agentDownload instructions from 5.4 section of Oracle Enterprise Manager Installation and Basic Configuration Guide.But when I got to #7 ....the documentation is not clear, as usual there are lots of injected unrelated topics which make the documentation "topsiturvy" and very hard to follow.
Can you just tell me, based on your experience how to install the agent? Someone told me to run OUI?
But I can not find it on the unzip >Linux_Grid_Control_agent_download_10_2_0_2_0.zip file
Thanks a lot.
Ms K

hi dear,
I want to upgrade my OMS server 10.2.0.1 to 10.2.0.5
I downloaded the patch 10.2.0.5 and read the README.txt
Part of the README is:
1.2 Enter the following command to extract the installation files:
$ unzip GridControl_10.2.0.5_<platform name>.zip
This command extracts the following files and directory:
|- p3731593_10205_<platform name>.zip
|- 3731596.zip
|- 3822442.zip
|- README.txt
|- doc/
NOTE: <platform name> will be "LINUX" or "Win32" depending on the platform for which you are installing. For installing Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), refer to the Release Notes available in the "doc" directory.
- p3731593_10205_<platform name>.zip is the ZIP file that contains 10.2.0.5 patch set software.
This zip can be used for:
- Upgrading Oracle Management Service Release 2 (10.2.0.x) or higher to Oracle Management Service Release 5 (10.2.0.5)
- Upgrading Oracle Management Repository (sysman schema)
- Upgrading Oracle Management Agent on the host where OMS is running.
NOTE: This will not upgrade the database in which the Management Repository (sysman schema) resides.
- 3731596.zip is for patching Management Agent by staging the patch set. To understand how you can apply the Management Agent 10.2.0.5 patch set, refer to method 2 described in section 4.3.3 "Upgrading Management Agent - Multiple Hosts at a Time" of the Release Notes. The Release Notes can be found in the "doc" directory.
- 3822442.zip is for patching Management Agent by distributing the full patch set. To understand how to apply the Management Agent 10.2.0.5 patch set, refer to method 1 described in section 4.3.3 "Upgrading Management Agent - Multiple Hosts at a Time" of the Release Notes. The Release Notes can be found in the "doc" directory.3731596.zip - by staging
3822442.zip - by distributing
Does the two above have the same function or purpose?
I can not understand the meaning of the two :( . which do you think is the right one for my setup?
Thanks a lot

Configuration Assistant failed during OEM 10g Grid control installation

Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

How can change database one to another in OEM 10g

hello
i have oracle 10g db 10.1.0.2.0 R2.
and 2 db 1. oracle(db_name) approx 5GB 2. oracle1(db_name) approx 2GB
now i am using OEM 10g or db managing.and manage oracle db through OEM.
but i want manage oracle1 db through OEM so what should i do..
plz. give me reply
very soon...
thanx.

If I understand your question correctly, you have one database that's showing in OEM you say. You didn't specify if it's Database Control or Grid Control.
Database Control allows u to manage only 1 database. So using Database Control of db1, you can manage db1. Using database control of db2, you can manage db2.
However if you want to manage both from one server, you can use Grid Control. To make the second node that hosts the second database show up in Grid Control, you need to install the management agent on that node. After that, once you set up the preferred credentials, it will be in GC.

10g RAC on SOLARIS 10

Hi,
What is the best CLUSTER I can use for my 10g RAC on SOLARIS 10.
Regards
MMU

I am going to install Oracle 10g RAC (standard Edition) on Solaris 10 (sparc 64bit).I am using Oracle Clustware only.I need step by step document for this installation.I have gone through Oracle documents and many others.I have failed many times in this installation so I need some good document.
Plz tell me what directories I need to create and permission for this directories.
I am creating these directories before starting CRS installation.
mkdir -p /opt/oracle/product/10.2.0/crs
chown -R root:oinstall /opt/oracle/product/10.2.0/crs
chmod -R 775 /opt/oracle/product/10.2.0/crs
mkdir -p /opt/oracle/product/10.2.0/db_1
chown -R root:oinstall /opt/oracle/product/10.2.0/db_1
chmod -R 775 /opt/oracle/product/10.2.0/db_1
mkdir -p /opt/oracle/admin
chown -R root:oinstall /opt/oracle/admin
chmod -R 775 /opt/oracle/admin
mkdir -p /var/tmp/.oracle
mkdir -p /tmp/.oracle
mkdir -p /var/opt/oracle
chown -R oracle:oinstall /var/tmp/.oracle
chown -R oracle:oinstall /tmp/.oracle
chown -R oracle:oinstall /var/opt/oracle

Installing Oracle 10g RS2 in Solaris 10

Hello Guys .. I need a tutorial on "How to Install Oracle 10g RS2" on Solaris 10 .. Please help me ...

hi
what do u mean by Oracle 10g RS2 what RS2 stands for
well
Oracle installation of 10G Release 2 on solaris
if its x86 then see this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15696/toc.htm
if its sparc64 then see this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15689/toc.htm
if this x86-64 then this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15703/toc.htm
hope this helps
CHeers

OEM 10g Connection Refused

I got following problem, when i log into EM:
java.lang.Exception: IOException in sending Request :: Connection refused: connect
That will appear on every EM i am connecting to...
I tried allready some troubleshooters like agentTZ, define TimeZone at emd.properties, restarting server or console but nothing helped.
I also looked for ports which will be used from more than one service but i found nothing :(
My OS is WinXP with 6GB Ram. Current there run 6 DBs on the machine
I have no Firewall on my OS.
If you need more Information, please ask, i am glad about every help i can get...
I have been trying to solve that problem for 3 days.

Hi,
See if these threads help you:
java.lang.Exception: IOException in sending Request :: Connection refused
Re: OEM 10g... with 10g Release 2
Cheers

Description for Each Database Metric and Policy of OEM 10g

Hi Dba's,
Thanks for having a look into this thread. I am looking for some Oracle online description for the Metrics as well as Policies it has defined in OEM 10g 10.2.0.3.0. Grid.

Metrics
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b25986/toc.htm
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16230/toc.htm
Policy
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16231/toc.htm
All
http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Please help me, a problem when install oracle 10g on the solaris 10

currently, I am installing the oracle 10g on the solaris 10, I am using DHCP and
my computer has no hostname, the following is copied from the 10g document,
When you run Oracle Universal Installer, an error may occur if name resolution is not set up. To avoid this error, before you begin installation, you must ensure that host names are resolved only through the /etc/hosts file.
To ensure that host names are resolved only through the /etc/hosts file:
1.
Verify that the /etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
2.
Verify that the host name has been set by using the hostname command as follows:
# hostname
The output of this command should be similar to the following:
myhost.mycomputer.com
currently, when I use hostname command, it is unknown, what should I do to add
my hostname? thanks

Since this is related to Solaris, you will most likely get a better/faster response on a Sun Solaris forum rather than here.
Srini

OEM 10G discovery on solaris

Similar Messages

Maybe you are looking for