Oem 10g grid control agent secure fails with error

When trying to secure the agent from one of the server it fails with the below error. If any one had faced this issue or know of the problem can help.
emctl secure agent password
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent successfully stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/eml/sec/emd/GetSecPort
Done.
Requesting an Oracle Wallet and Agent Key from the OMS...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/eml/sec/emd/GetWallet
Failed.
Failed to contact the OMS at the HTTP URL set in /apps/apsp1/oracle/emhome/agent10g/sysman/config/emd.properties
The Agent has not been secured.

Failed to contact the OMS at the HTTP URL set in /apps/apsp1/oracle/emhome/agent10g/sysman/config/emd.propertiesDid you check that? It seems configuration file 'emd.properties' points to a URL, which cannot be resolved.
Werner

Similar Messages

Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

Configuration Assistant failed during OEM 10g Grid control installation

Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

OEM 10g Grid Control Problem

Hi,
We installed the OEM 10g Grid Control in Serparate Host..
Installed 10.2.0.1 grid control
and patched upto 10.2.0.3 for OMS....
here OMS version is 10.2.0.3
grid Control Agent Version is 10.2.0.3
and Repository Home is 10.2.0.1
Installed the linux Grid control agent 10.2.0.3 in target database...installation was successfull....but Target database is not showing in the grid control ..what was the problem...

where to check the log files in target database host..do u mean that...
i installed agent on target database home in a seperate directory...
ORACLE_HOME is the Target Database Oracle Home
cd $ORACLE_HOME/agent10g/sysman/log/
is it the correct directory to check the log files..i am new to this grid control...
=========================================================
$cat emagent.trc
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:08 Thread-5980167 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:18 Thread-65541 ERROR command: nmejcn: received no status header from repository at http://gridserver.abc.com:4889/em/upload/
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:42 Thread-6406151 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
================================================
$ cat emctl.log
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: Processing start agent
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: EMHOME is /u02/targetdb/10.2.0/agent10g
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm:status agent returned with retCode=1
15709 :: Sun Aug 19 11:42:36 2007::AgentLifeCycle.pm: Exited loop with retCode=3
16405 :: Sun Aug 19 11:48:23 2007::AgentLifeCycle.pm: Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:emdctl status returned 3
19862 :: Sun Aug 19 12:02:42 2007::AgentLifeCycle.pm: Processing status agent
19862 :: Sun Aug 19 12:02:42 2007::AgentStatus.pm:Processing status agent
19862 :: Sun Aug 19 12:02:43 2007::AgentStatus.pm:emdctl status returned 3
20326 :: Sun Aug 19 12:04:05 2007::AgentLifeCycle.pm: Processing status agent
20326 :: Sun Aug 19 12:04:05 2007::AgentStatus.pm:Processing status agent
20326 :: Sun Aug 19 12:04:06 2007::AgentStatus.pm:emdctl status returned 3
20404 :: Sun Aug 19 12:05:41 2007::AgentLifeCycle.pm: Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:emdctl status returned 3
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:Processing upload
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:emdctl status agent returned 3
21329 :: Sun Aug 19 12:16:38 2007::AgentStatus.pm: emdctl upload returned with exit code 6
21685 :: Sun Aug 19 12:22:59 2007::AgentLifeCycle.pm: Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:emdctl status returned 3
22464 :: Sun Aug 19 12:40:17 2007::AgentLifeCycle.pm: Processing status agent
22464 :: Sun Aug 19 12:40:17 2007::AgentStatus.pm:Processing status agent
22464 :: Sun Aug 19 12:40:18 2007::AgentStatus.pm:emdctl status returned 3

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

How to setup DISK SPACE alert on OEM 10g Grid Control...

Gurus,
I am trying to setup DISK SPACE notification / alert thru OEM 10g Grid Control, but so far no luck.
Can someone help/guide me on how to achieve this?
Please advice.
Thanks & Regards,
Kartik

Those two links don't say anything about "DISK SPACE ALERT" I already know how to setup notification. I suppose you are talking about Filesystem Space Available (%)
If you need to setup an alert (Notification) then i suppose you need to setup an notification rule.
Yes, these notes do not have the key word "DISK SPACE ALERT" you are looking for, but if you go through the first note CLEARLY and COMPLETELY, you should find your answer.
And he has given an example for Filesystem space available in this note, which is what you are looking for.(I think so)
Say for Disk Space, you create a notification rule for target hosts and have metric "Filesystem Space Available (%)" defined in that rule.
If you aren't talking about notifications and just want to setup an filesystem space available metic, then follow this note:
How To Setup Host Metrics For Filesystem
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=749341.1

OEM 10g grid control using an existing database

Hello all,
Has anyone been successful in installing Enterprise Manager 10g Grid
Control (10.1.0.3) using and existing 10g (10.1.0.3) database?
10g grid control comes with 9.0.5.0 database for it repository. Since
this respository can not be update to 10.1.0.3, Oracle recommends using
and existing 10g database instead.
My installation goes 90% all the way before it fails. It fails at the
create repository point.
If any one has been successful, could you please share your success
with me.
Thanks,
Jake

Well, finally I did it! :)
The problem comes when you are trying to install OEM repository into existing 10g DB which used to be configured with a standalone Database Control. Dropping SYSMAN user is not enough!!! There are some leftovers which must be cleaned before running repository creation assistant:
drop user SYSMAN cascade;
drop user MGMT_VIEW cascade;
drop role MGMT_USER;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
That's all folks.

Grid Control agent install fails

Hi all,
I'm trying to install Oracle Grid control agent on linux machine and getting the following error:
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-8 or SuSE-9
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 1544 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1701MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2004-12-20_08-44-53AM. Please wait ...
Error in writing to directory /tmp/OraInstall2004-12-20_08-44-53AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
My /tmp has 1.5 GB of free space so that's really not the issue here. I know that the installation goes well if I use the Universal Installer that comes bundled with 10G RDBMS, but on machines with Oracle 8.1.7.4-9.2.0.5 I wouldn't like to update OUI's because of this issue. Anyone having this problem/solution?
Br,
Anssi

The issue is not about silent install or temp or root.
I have installed Agent on Linux without issues after I read closely the oracle requirements on linux.
Make sure you read oracle linux requirement, there is a patch you need to download that will create proper setting for oracle on linux.
Try look for Application Server 10g installation guide, this patch is documented for Application Server 10g on linux.
The patch will create oracle.sh file that linux will run each time user oracle is activated.
If you still get problem let me know through forum or direct.
Thanks
George

How to know what *.exe is called my notification in OEM 10G Grid Control

Our Port 25 is blocked. and the security does not want to open the port 25 for the machine. He wants to give exact .exe file the permission which executes the email..
Do you guys what exe is called for email notification ?
Thanks
Atul

You can get all the default Grid Control Ports in Metalink Note Note:235298.1 -
Overview of Default Ports Used by EM 10g Grid Control, DB Control and AS Control

SQL Server Agent job fails with error : The package execution returned DTSER_FAILURE (1).

Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.

The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

DPM Agent Installation Failed with Error code =0x80070643

Hi,
We had an Virtual Machine TFS server 2010 which had SQL server 2008 R2 installed on it.
On this Server we were running an DPM 2010 agent and it was fine.
Then I had uninstalled DPM 2010 agent and try to Install DPM 2012 R2 Agent on this Virtual Machine it gives me error 0x80070643. And for other VM the agent installation is fine.
When I checked on DPM agent logs in Windows/Temp folder it gives me below error.
I had tried with Deleting DPM Registry but still the Problem remains same.
Thanks

Hi,
Earlier the Protected Server had DPM 2010 Agent installed and while Troubleshooting I had already deleted the
HKLM\SOFTWARE\MICROSOFT\Microsoft Data Protection Manager\Setup Registry
And Tried to Reinstall Agent but still it gives same error.
Regards,
Nadeem

OEM Database Control and 10g Grid Control

Can any one tell the difference between OEM Database Control and OEM 10g Grid Control.

Database Control is the HTTP Management environment and comes installed with the 10g Database. It can be used to manage one database (one target) at a time (standalone). To monitor more than one database, you must create a new console on a different port for each database.
10g Grid Control is the Enterprise version in that you can monitor different Target from different operationg systems at the same time. These include Application Servers, Listeners, Operation Systems, Non Oracle Database Systems using plugins (from 10gR2).
So, for someone who was using OEM 9i, there was connection in to Standalone Console (Java) and Oracle Management Server (Java and HTML). In 10g, they are replaced with Database Control (Java and HTML versions) and Grid Control respectively.

Allow grid control agent to connect to a database as sys with no listener

Hi
I have a database which I would like to monitor using the 10g grid control agent.
the agent and DB are on a Unix Box
The database has a listener, but because it is part of a contingency system we keep the listener shut down
my question is:
Is it possible to configure the agent to connect to a Database (as sysdba) without the listener for that database running?
Regards
Graham
Edited by: Grahambo on May 14, 2009 5:41 AM

No its is not possible if listener is not running

10g Grid Control Installation/Configuration

I want to install and configure the 10g grid control agent in our environment.
Is there any step by step document for installation and configuration.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

Oem 10g grid control agent secure fails with error

Similar Messages

Maybe you are looking for