OEM 10g not starting in explorer client

Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Any Ideas?
(I can ping the server from my pc)

Charlov wrote:
Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Hey its [https://stagedb.wavemark.net:1158/em] in 10.2.0.4
Try telnet to the port from you machine.
c:/>telnet stagedb.wavemark.net 1158
See if the port is open.
Regards.

Similar Messages

Could not start NetSupport Manager Client For MacOS X because the lice

Could not start NetSupport Manager Client For MacOS X because the licence expired
"Could not start NetSupport Manager Client For MacOS X because the license file has expired."
I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17 to be exact).
My issue is how to fix it. What is the exact programme in error? What do i delete?
I have even upgraded to Leopard and the problem migrates to that(!) So clearly I have to manually sort this out. But how?
Many thanks
Anthony
reposted original 19/nov/2007 unanswered

NetSupport Manager's web site would appear to be here (found via a quick web search):
http://www.netsupportmanager.com/
They should be able to tell you how to install their product, if the download doesn't contain an uninstaller (I'm not going to register with them just to find out).
Regards

Could not start NetSupport Manager Client For MacOS X because the license e

"Could not start NetSupport Manager Client For MacOS X because the license file has expired."
I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17 to be exact).
My issue is how to fix it. What is the exact programme in error? What do i delete?
I have even upgraded to Leopard and the problem migrates to that(!) So clearly I have to manually sort this out. But how?
Many thanks
Anthony

NetSupport Manager's web site would appear to be here (found via a quick web search):
http://www.netsupportmanager.com/
They should be able to tell you how to install their product, if the download doesn't contain an uninstaller (I'm not going to register with them just to find out).
Regards

Windows could not start the DHCP Client service on Local Computer, Error 2

Hi everyone,
I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
service on Local Computer." "Error 2: The system cannot find the file specified.".
There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
"sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
"NET LOCALGROUP administrators "NT Authority\Local Service" /add"
"netsh winsock reset catalog"
I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

Hi,
Did you mean after the restart the sfc /scannow command still could find the corrupted files?
Have you check this these related registry entries permission for your account?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
permission needed: Full Control, Read
for more information, read this article:
Some services do not start in Windows Vista and Windows 7
https://support.microsoft.com/kb/943996?wa=wsignin1.0
If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
Karen Hu
TechNet Community Support

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Oracle 10 g OEM does not start after XP boot

Hallo!I am currently studying for the Oracle 10g Administration OCA
I installed Oracle 10 g on Windows XP but once I boot the OS and enter the OEM url on the browser,OEM does not load.
I am forced to go to the command prompt and manually start OEM via the command
emctl start dbconsole.
How can I configure my oracle to enable OEM to automatically start after booting the OS?
Thanks.

Hans Forbrich wrote:
user11114098 wrote:
During installation,the computer was connected to the internet via a modem that uses DHCP?So typical.
How do I resolve this issue?Microsoft Loopback Adapter. Force it to a static IP value, and enter that value in the hosts. table.
How?: Discussed more than a few times in these forums. Discussed in Microsoft forums. Discussed on internet.Also discussed in the Fine Installation Guide ... ;-)

Oracle 10g not starting after upgarde

Hi,
   Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
Murali

Hi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
    Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning.

Oracle does not start services after client copy

hi all!
I tell them my problem, yesterday began the principal copy from PRD to QAS client, this for reasons of space he was arrested.
Realizing this, we assign more space to QAS server, but when you try to lift the services again we are presented with the following error.
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Feb 25 18:14:30 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 3405774848 bytes
Fixed Size                  2024560 bytes
Variable Size            1711278992 bytes
Database Buffers         1677721600 bytes
Redo Buffers               14749696 bytes
Database mounted.
ORA-16038: log 4 sequence# 3548 cannot be archived
ORA-19504: failed to create file ""
ORA-00312: online log 4 thread 1: '/oracle/QAS/origlogB/log_g14m1.dbf'
ORA-00312: online log 4 thread 1: '/oracle/QAS/mirrlogB/log_g14m2.dbf'
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
Someone could give me some guidance on how to solve the problem.
thanks.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

OEM does not start up

Hi there,
I have a strange behaviour of OEM, It doen not even start, I have a message saying: fatal error, registry problem.
I tried to re-install the product (coming with IDS, Oracle8i Entreprise Edition Release 3 (8.1.7)), the same problem occurs again.
I understand that there is some pb with the registries, but I could not fix it.
Help please
Thanks in advance
JF

Okay, I've done some more investigation.
I logged into sqlplus as SYS AS SYSDBA
Tried to connect to SYSMAN but the system responded with a message that the account is locked and then it disconnected my session.
Connected back to the database via the command: CONNECT SYS AS SYSDBA
Entered the password and connected successfully
Unlocked the SYSMAN account via the command: ALTER USER SYSMAN ACCOUNT UNLOCK;
Connected to the database successfully as SYSMAN
Tried to open OEM: Opened directly to the Status display with out opening the login page
Went back to sqlplus and tried connection as SYSMAN but the system said the account was locked
Trace file emoms.trc also says the account is locked.
So it does look like the attempt to open the OEM, or something else, is locking the sysman account

Error 5: Access Denied can not start the DHCP Client service on Local Computer.

Ran into this error problem with both the DHCP and BFE service. Neither will start and both give me the same error code 5 access denied.
Found this little nugget below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
Right click and choose Permissions. There should be the following:
System = Full Control
Local Service = Read
Network Service = Read
Local Admin = Full Control
Local Users = Read
Dhcp = Read with special permissions
No problem adding the missing Local Service and Network Service. How does one add Dhcp? Is there a way to create this because under permissions there is no way to add this or search it up. Is there a NetSH reset command that will add this in for me?
The Netlogon service was not running and to get the Netlogon service going I ran NetSH int ip reset and it started to work. The other services were not running either and I was hoping they would after resetting IP
Any ideas on to fix this problem? Also, the user turned off the laptop when it was doing updates. Still I do not think it would have created this headache.
TIA
Spammer Hammer

Hi,
Was your issue resolved?
If no, please reply and tell us the current situation in order to provide further help.
Karen Hu
TechNet Community Support

ISQLPlus on 10g not starting

Hi,
I'm running 10g R2 on Ubuntu 7.04 Server. The DB, EM and SQLPlus are running fine. iSQLPlus however, isn't running at all, without feedback (I think) whatsoever. If I run isqlplusctl start it comes back to me with iSQLPlus started and it didn't start at all... The logs in $ORACLE_HOME/oc4j/j2ee/isqlplus/log show only a few entries, of the day the system was installed.
The system has a different IP since the installation, could this be an issue?
Best regards,
Sylvain Girard

Hi,
I'm running 10g R2 on Ubuntu 7.04 Server. The DB, EM and SQLPlus are running fine. iSQLPlus however, isn't running at all, without feedback (I think) whatsoever. If I run isqlplusctl start it comes back to me with iSQLPlus started and it didn't start at all... The logs in $ORACLE_HOME/oc4j/j2ee/isqlplus/log show only a few entries, of the day the system was installed.
The system has a different IP since the installation, could this be an issue?
Best regards,
Sylvain Girard

OEM not starting in 10G ...

HI,
While i am starting the oem it is saying below error:
D:\oracle\product\10.2.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://HIC-PCS0753:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleo
cl service is starting.
The OracleDBConsoleorcl service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
D:\oracle\product\10.2.0\db_1\BIN>NET HELPMSG 3534
The service did not report an error.
Please suggest how to proceed resolving the above error.
Thanks
Saurabh

Charlov wrote:
Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Hey its [https://stagedb.wavemark.net:1158/em] in 10.2.0.4
Try telnet to the port from you machine.
c:/>telnet stagedb.wavemark.net 1158
See if the port is open.
Regards.

Performance of the OEM 10g

Hi, I'm running oem 10.1.0.2 and some screens in the enterprise manager web frontend have ridiculous response times. For example, when I want to see the list of tablespaces I have to wait roughly 10 min until the list comes up. Other examples are: screens to maintain archive logs and backup sets. Does anybody have similar observations and solutions for these issues?
Thanks in advance
wn.ibs

That's the spec of the machine where the Oracle-Server is running on.
The OEM webapp is started from XP clients, but it doesn't matter which hwspec the client has, the response times for the tasks is the same no matter where I start the browser.
The most obvious (and suspicious) place is the Administration/Storage section of the OEM GUI:
1st entry "Control Files": fast response
2nd entry "Tablespaces": up to 15 minutes
3rd entry "Datafiles": up to 15 minutes
4th entry "Rollback segments": fast response
5th entry "Redo Logs": fast response
6th entry "Archive Logs": fast response (which is interesting, because the screen to MAINTAIN them in the OEM-Maintenance menu takes ages to respond)
7th entry "temporary tablespaces": fast response
I have no clue what the hell is going on here.
/wn.ibs

Oem 9i vs oem 10g (client-server)

Hi friends,
I run both my 9i and 10g OEM (client-server based) against/accessing/managing
an oracle 8i db. In 9i oem i can run TOP SESSION/TOP USERS stats
but in 10g oem its not available now.
Likewise in 9i oem i can add,delete,insert,update a row on any schema table
but in 10g oem its not avialable also. Why is this lose in functionality
happened please.
thanks :)

No, Kri...
Oracle10g introduced a brand-spanking new way of doing things. One OEM database control, reachable through one port, per 10g database instance. SID and other information hard coded right in the emctl routine used to start and stop the OEM engine.
To get at any other versions, you go through the Grid Control: set up an agent on the machine to be monitored, set up a central repository and a central grid control 'management server' and point your browser at the management server.
Or you go dual operation - the 9i OEM standalone console for 9i and lower and the web console for 10g and higher.

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

OEM 10g not starting in explorer client

Similar Messages

Maybe you are looking for