OEM 11g installation

Hi
I want to install Oracle Enterprise manager 11g, I have downloaded V23675-01.zip, V23676-01.zip, V23677-01.zip
I unziped V23676-01.zip, V23677-01.zip and they made oms directory, however if i am trying to unzip V23675-01.zip, it gives below message
Archive: V23675-01.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of V23675-01.zip or
V23675-01.zip.zip, and cannot find V23675-01.zip.ZIP, period.
Please help
Also please provide me the documentation of how to install OEM 11g/OEM 12c on Solaris SPARC(64)
Regards

Please use unzip version 6 only for extracting the software.
Here is the doc link of 12c/11.1
http://docs.oracle.com/cd/E24628_01/install.121/e22624/toc.htm
http://docs.oracle.com/cd/E11857_01/install.111/e15838/toc.htm

Similar Messages

Need installation document for OEM 11G on windows 2003(32 bit).

Hi,
As a part of my project, i need to install the OEM 11G on windows 2003(32 bit) machines and targets also windows 2003. there i need to install again agent 11g(11.1.0.1) and target DB is 10.2.0.4.
I have done the installation of OMS successfully and installed the agent 11g on target as well. i am facing challeges in configuring the database from OMS. i tried couple of options but nothing is working out. Finally i decided to cross check the installation procedure once again with the previously completed ones. could any body share the same.
in breif i have done following.
1) installed RDBMS 11G on OMS server.
2) insalled java 1.6.18.
3) installed WLS 10.3.2
4) installed the OMS 11G(11.1.0.1)
On agent side i installed agent 11g(11.1.0.1) to monitor a database which is of 10.2.0.4 version.
agent,listeners are reflecting on OMS with up status but DB is showing as "metric collection error". i tried all the possible options like removing and reconfiguring and agent clearing and agent restart etc...but no use. also i in the Oracle installation document, they mentioned as we need to set user equavelence between OMS and agent server but not sure of this, which i have not done. is this compulsary?
Sorry for putting all the things in one single thread.
Thanks in-advance.
Regards
DBA.

Did you check if the database is configured in GC?
If you can't connect using sqlplus to the user dbsnmp make a connection to the database: alter user dbsnmp identified by <password> account unlock;
In GC go to Targets, All Targets select the DB concerned and hit Configure. Enter the dbsnmp user password etc. After a while you will see the result: DB shows Up (I hope)
Eric

OEM 11g Grid Control installation for 10g R2 database

Hi ,
I am new with oracle enterprise manager grid control ,
I have 3 questions ,
1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
I will really appreciate if someone can help me with these details , thank you.

1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
Yes
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
Yes
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
You don't need any license to use OEM 11g, however you do need licenses to use Management Packs
Checkout:
Oracle® Enterprise Manager Licensing Information
11g Release 1 (11.1)
http://download.oracle.com/docs/cd/E11857_01/license.111/e11987/toc.htm
Regards
Rob
http://oemgc.wordpress.com

Error starting OEM 11g

I finally have (I think) successfully installed OEM 11g. Following the installation guide, I proceeded to try to execute the following command:
$ emctl status oms
But got the following error:
EM Configuration issue. /export/home/oracle/app/oracle/product/11.2.0/dbhome_1/mercy_emrep not found.
When I looked under /export/home/oracle/app/oracle/product/11.2.0/dbhome_1, I don't see any file/directory that starts with my host name (i.e. mercy). How can it be missing?
Edit: I should add that there's no "localhost" directory/file either...
Edited by: PPPP on May 12, 2010 3:13 PM

It turns out I was using the wrong emctl :(
When I used the one from /export/home/oracle/Oracle/Middleware/oms11g/bin/emctl, it shows me the server is up.
Thanks!

Configure SNMP for send trap in OEM 11g

Hi,
We have OEM 11g in our environment. We have to configure SNMP for send trap to third party application in OEM.
Our platform is Oracle Enterprise Linux 5.4 . We have installes SNMP in Platform . As mention in document (http://download.oracle.com/docs/cd/E11857_01/em.111/e14091/chap2.htm#CHDFDJJI) we configure MASTER.configer file. Then we started the SNMP agent by root user through command ./start_peer -a.
We configure SNMP rule in OEM and then assigned this rules to method.
But we are not able to send traps to third party application(IT360).
I am not able to integrate OEM 11g with IT360.
please suggest me, where i am going wrong in this configration? or i have to do some more configration?
Thanks in advance
Vikash

The SNMP reference manual has been removed from the 10g and 11g doc set.
You could consult the manual in the 9i doc set and check whether the files for your unmentioned platform still get delivered.
Sybrand Bakker
Senior Oracle DBA

404s on the OEM 11g docs

Some of the docs referenced from the OEM 11g Grid Control doc set at http://download.oracle.com/docs/cd/E11857_01/index.htm result in 404s
Unfortunately, the exact list is inconsistent - last week (when teach the Grid Control course) any reference to any Metrics Reference manual 404'd
Today it is the "Universal Installer and OPatch User's Guide for Windows and UNIX" (http://www.oracle.com/pls/em111/to_toc?pathname=user.111%2Fb16227%2Ftoc.htm&remark=docindex) but only from the Master Book List (http://www.oracle.com/pls/em111/docindex)

Here's some information that I received:
"The pattern is that only URLs generated by Tahiti (contains "pls" in the URL) are broken and -- even then -- only a small subset of those. Basically, this means that some links from the master index, master glossary, master booklist, search results, and help-to-doc will be broken. We will have this resolved by Friday. We can't solve it before Thursday night due to work the IT teams are performing on our Tahiti servers."

OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
Nitin

Hi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram

OBIEE 11g installation - OutOfMemoryError: PermGen space

Hi All
OBIEE 11g installation fails at configuration step with the following error:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
We tried to set the set JRE_MEMORY_OPTIONS in oraparam.ini file and ran the config.bat too.
While running config.bat, the setup is asking for "Scale out BI" and not for creating New domain.
So we are unable to continue with the installation.
Has anyone faced this error.
We are installing on Win7 64 bit machine.
Thanks
Edited by: 943911 on Aug 8, 2012 5:17 AM

increase permgen space like this:
-XX:PermSize=256m
-XX:MaxPermSize=256m
If not try enabling permgen garbage collection with
-XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled

OSB 11g Installation in production environment

I am trying to install OSB 11g in production mode. But, the problem is its always pointing to the evaluation database, even though I don't require any DB (not using the reporting feature or OWSM). I saw the following workaround and it worked fine, but is it the only way?
This error you will normally see if you use the built in pointbase db with production domains only.
I would recommend you use different database in pointbase or better an oracle database. Work around would be to delete WL_LLR* from you point base and the domain will start with out problem.
If you are not aware of how to delete the table in Pointbase/Derby, then other workaround (I normally use when using production domain with Derby/Poinbase) option would be to open config .xml and delete <jdbc-system-resource>
<name>wlsbjmsrpDataSource</name>
<target>AdminServer</target>
<descriptor-file-name>jdbc/wlsbjmsrpDataSource-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Even if i configure a different DB, but it still pointing me to Derby?
Is this a bug with OSB 11g installation in a production env?
Thanks,
Bijoy

Hello Bijoy,
The evaluation database is provided for use by the sample applications and code examples. If you do not want to use evaluation DB then don't install it.
To not install evaluation DB, while installing weblogic, select custom installation type, uncheck the "Evaluation Database" checkbox ("Server Examples" will automatically get unchecked) and proceed. Now your weblogic will be installed without an evaluation DB.
Regards,
Anuj

Performance Report using OEM-11g

Hi All,
Is there any way to get the Monthly Database performance report using OEM Grid Control... I am able to grab only one week data in Historical option....
Thanks In advance

I have the same problem in OEM 11g, the calendar on the Performance tab - Historical selection - only shows "January 0" and can not be changed...a bug?
Oracle 11.2.0.2.0 database on AIX.
Using OEM Cloud 12c on some test instances again 11.2 on AIX and it works fine there.
Any updates?

Want to create custom report under report field in OEM 11G

Dear all
I would like to create custom report on OEM 11G. I have query which is executed and verified from TOAD. But after placed report element it shows an error that table/view not exits. But it doesn't ask any database user name and password.So let me like to know how to do this. I want add more and more reports after the success of this.. Ho can it be done?Please advice.
Note:-
The data is getting from OEM repository i think so.. But i need a report which is get data from various apps and system tables. So how to display result from this table and shown to EBS reports.
Regards,
Gobinath.R
Associate consultant
Petrofac Information Services Private Limited
Chennai.
Edited by: Gopinath on May 18, 2012 4:23 AM

Report should be based on tables in repository database. Mostly sysman tables we will be using for reporting. If you need other database tables then you need to create dblink to those targets in sysman schemas. To my knowledge that's the only way you can refer to other db tables in reports.
Regards,
Satheesh Shanmugam

Monitoring WCI 10.3.0 & UCM 10.1.3.5 using OEM 11g R1

As part of the Service Monitoring for our OFM-OUCM environment, we have implemented OEM 11g R1. Our Dev/Test/UAT/Prod environment is comprised of SOA 10.1.3.5, WCI 10.3, UCM 10.1.3.5, multiple DB instances 10.2.0.3/10.2.0.4, IDM 10.1.4.0.1. We are able to monitor SOA 10.1.3.5, IDM 10.1.4.0.1 & the databases. But the 11g Agent wasnt able to discover the targets for WCI 10.3.0 & UCM 10.1.3.5. Is there a way to monitor UCM 10gR3 & WCI 10.3 using OEM 11g R1 or do we need to downgrade the OEM version.
We are able to see the WCI Products in the Hosts -> Configuration tab in OEM. But we are not able to monitor these as targets.
WebCenter Interaction API Service 10.3.0.0.0
WebCenter Interaction Automation Service 10.3.0.0.0
WebCenter Interaction Content Upload Service 10.3.0.0.0
WebCenter Interaction Directory 1.0.0.0.0
WebCenter Interaction Document Repository Service 10.3.0.0.0
WebCenter Interaction Identity Service for LDAP 10.3.0.0.0
WebCenter Interaction Image Service 10.3.0.0.0
WebCenter Interaction Notification Service 1.0.0.0.0
WebCenter Interaction Portal 10.3.0.0.0
WebCenter Interaction Remote Portlet Service 1.0.0.0.0
Thanks

Did you check http://www.oracle.com/us/products/enterprise-manager/039537.pdf ?
and http://www.oracle.com/technetwork/oem/soa-mgmt/index.html
MANAGEMENT PACK FOR WEBCENTER SUITE
Regards
Rob
http://oemgc.wordpress.com

Bulk configuration of databases in OEM 11g

Hello,
I've got more then one databases , Is there any easy way to perform bulk configuration of databases into OEM 11g rather configuring one by one database?
such as editing any config files like targets.xml
thx,
Kam

Hi Kam,
EMCLI is the tool to do bulk changes. I don't know exactly what you mean by bulk configuration but if you take a look at http://download.oracle.com/docs/cd/E11857_01/em.111/e16185.pdf
you'll get the picture.
Eric

Convert custom management plug-in in OEM 11g to OEM 12c compatible plug-in

Hi All,
We have a custom plug-in developed and deployed in OEM 11g. We are planning to move to OEM 12c(12.1.0.4) and installing OEM 12c(fresh install) in a new host instead of migrating existing 11g to 12c as part of upgrade process.
Now question is what are the options if I want to use existing 11g custom plug-in in OEM 12c ? As I understand 11g plug-ins are jar file but OEM 12c plug-ins are OPAR files.
Can we export plug-in from OEM 11g and import directly in OEM 12c or if there are any steps to conver 11g plugin to 12c plugin before importing it in 12c.
Please suggest the options available without re-developing the plug-ins for OEM 12c.
Thanks

To overwrite and update your current custom plug-in update that is stored in a repository, use the overwrite option.
$emcli create_custom_plugin_update
-agent_name="agent_name"
-plugin_id="plugin_id"
[-overwrite]
This command creates and imports a custom plug-in update from an existing Management Agent where the selected plug-in is deployed. The custom plug-in update will be used for all subsequent plug-in deployments on any Management Agent, in place of Oracle supplied versions.
Custom plug-in update is created as per plug-in type. If a custom plug-in update is created, and after three days, a patch is applied, in order to include the patch, the custom plug-in update will have to be created again.
$emcli list_custom_plugin_updates
Please refer the below doc for more info..
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/plugin_mngr.htm#CJGCHGIH
Regards
Krishnan

ChangePerm.sh file does not exist in Oracle 11g installation

Hi All,
I have done successful Oracle 11g installation. After installation I noticed that Oracle 11g/installation does not have changePerm.sh file. Did anyone of you seen that?
Without executing changeperm.sh file, the binary files have 751 permission level. ChangePerm.sh script make change in file permission to 755.
Oracle support is not answering me why there was no changePerm.sh file under Oracle_home/install directory.
Thoughts/suggestions..
Thank you
Suresh

I'm not finding this to be the case reliably. I have both a 10G and an 11G install on one particular machine and the 11G installer initially creates the directories with a 755 permission, then right before the prompt to run root.sh, and at the same time it locks down any 10G home it finds (someone please explain that!) it locks down the 11G home too.
In true Murphy tradition, this hasn't happened on any of my testing machines, just my production.
Whatever silly contrived mechanism Oracle wrote to re-lock 10G when installing 11G is also locking down my 11G.

OEM 11g installation

Similar Messages

Maybe you are looking for